Dominique A. Wappett
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Dominique A. Wappett has a total of 1 co-authors. Here are the top co-authors by number of shared publications:
- Lars Goerigk
University of Melbourne
8 shared publications
Latest Publications
- Open Access
- 21 December 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 128 (1) , 62-72
Exploring CPS-Extrapolated DLPNO–CCSD(T1) Reference Values for Benchmarking DFT Methods on Enzymatically Catalyzed Reactions
Domain-based local pair natural orbital coupled-cluster singles doubles with perturbative triples [DLPNO-CCSD(T)] is regularly used to calculate reliable benchmark reference values at a computational cost significantly lower than that of canonical CCSD(T). Recent work has shown that even greater accuracy can be obtained at only a small additional cost through extrapolation to the complete PNO space (CPS) limit. Herein, we test two levels of CPS extrapolation, CPS(5,6), which approximates the accuracy of standard TightPNO, and CPS(6,7), which surpasses it, as benchmark values to test density functional approximations (DFAs) on a small set of organic and transition-metal-dependent enzyme active site models. Between the different reference levels of theory, there are changes in the magnitudes of the absolute deviations for all functionals, but these are small and there is minimal impact on the relative rankings of the tested DFAs. The differences are more significant for the metalloenzymes than the organic enzymes, so we repeat the tests on our entire ENZYMES22 set of organic enzyme active site models [Wappett, D. A.; Goerigk, L. J. Phys. Chem. A 2019, 123, 7057-7074] to confirm that using the CPS extrapolations for the reference values has negligible impact on the benchmarking outcomes. This means that we can particularly recommend CPS(5,6) as an alternative to standard TightPNO settings for calculating reference values, increasing the applicability of DLPNO-CCSD(T) in benchmarking reaction energies and barrier heights of larger models of organic enzymes. DLPNO-CCSD(T1)/CPS(6,7) energies for ENZYMES22 are finally presented as updated reference values for the set, reflecting the recent improvements in the method.
- 21 December 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 128 (1) , 62-72
Open AccessExploring CPS-Extrapolated DLPNO–CCSD(T1) Reference Values for Benchmarking DFT Methods on Enzymatically Catalyzed Reactions
Domain-based local pair natural orbital coupled-cluster singles doubles with perturbative triples [DLPNO-CCSD(T)] is regularly used to calculate reliable benchmark reference values at a computational cost significantly lower than that of canonical CCSD(T). Recent work has shown that even greater accuracy can be obtained at only a small additional cost through extrapolation to the complete PNO space (CPS) limit. Herein, we test two levels of CPS extrapolation, CPS(5,6), which approximates the accuracy of standard TightPNO, and CPS(6,7), which surpasses it, as benchmark values to test density functional approximations (DFAs) on a small set of organic and transition-metal-dependent enzyme active site models. Between the different reference levels of theory, there are changes in the magnitudes of the absolute deviations for all functionals, but these are small and there is minimal impact on the relative rankings of the tested DFAs. The differences are more significant for the metalloenzymes than the organic enzymes, so we repeat the tests on our entire ENZYMES22 set of organic enzyme active site models [Wappett, D. A.; Goerigk, L. J. Phys. Chem. A 2019, 123, 7057-7074] to confirm that using the CPS extrapolations for the reference values has negligible impact on the benchmarking outcomes. This means that we can particularly recommend CPS(5,6) as an alternative to standard TightPNO settings for calculating reference values, increasing the applicability of DLPNO-CCSD(T) in benchmarking reaction energies and barrier heights of larger models of organic enzymes. DLPNO-CCSD(T1)/CPS(6,7) energies for ENZYMES22 are finally presented as updated reference values for the set, reflecting the recent improvements in the method.
- Open Access
- 28 November 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Exploring CPS-extrapolated DLPNO-CCSD(T1) reference values for benchmarking DFT methods on enzymatically catalyzed reactions
Domain-based local pair natural orbital Coupled Cluster Singles Doubles with Per- turbative Triples [DLPNO-CCSD(T)] is regularly used to calculate reliable bench- mark reference values at a significantly lower computational cost compared to canonical CCSD(T). Recent work has shown that even greater accuracy can be obtained at only a small additional cost through extrapolation to the complete PNO space (CPS) limit. Herein we test two levels of CPS extrapolation—CPS(5,6), which approximates the accuracy of stan- dard TightPNO, and CPS(6,7), which sur- passes it—as benchmark values to test den- sity functional approximations (DFAs) on a small set of organic and transition-metal- dependent enzyme active site models. Be- tween the different reference levels of the- ory there are changes in the magnitudes of the absolute deviations for all function- als, but these are small and there is mini- mal impact on the relative rankings of the tested DFAs. The differences are more sig- nificant for the metalloenzymes than the organic enzymes, so we repeat the tests on our entire ENZYMES22 set of organic enzyme active site models [J. Phys. Chem. A 2019, 123, 7057.] to confirm that using the CPS extrapolations for the reference values has negligible impact on the bench- marking outcomes. This means we can particularly recommend CPS(5,6) as an al- ternative to standard TightPNO settings for calculating reference values, increasing the applicability of DLPNO-CCSD(T) in benchmarking reaction energies and bar- rier heights of larger models of organic en- zymes. The DLPNO-CCSD(T)/CPS(6,7) energies for ENZYMES22 are finally pre- sented as the updated reference values for the set, reflecting the recent improvements in the method.
- 28 November 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessExploring CPS-extrapolated DLPNO-CCSD(T1) reference values for benchmarking DFT methods on enzymatically catalyzed reactions
Domain-based local pair natural orbital Coupled Cluster Singles Doubles with Per- turbative Triples [DLPNO-CCSD(T)] is regularly used to calculate reliable bench- mark reference values at a significantly lower computational cost compared to canonical CCSD(T). Recent work has shown that even greater accuracy can be obtained at only a small additional cost through extrapolation to the complete PNO space (CPS) limit. Herein we test two levels of CPS extrapolation—CPS(5,6), which approximates the accuracy of stan- dard TightPNO, and CPS(6,7), which sur- passes it—as benchmark values to test den- sity functional approximations (DFAs) on a small set of organic and transition-metal- dependent enzyme active site models. Be- tween the different reference levels of the- ory there are changes in the magnitudes of the absolute deviations for all function- als, but these are small and there is mini- mal impact on the relative rankings of the tested DFAs. The differences are more sig- nificant for the metalloenzymes than the organic enzymes, so we repeat the tests on our entire ENZYMES22 set of organic enzyme active site models [J. Phys. Chem. A 2019, 123, 7057.] to confirm that using the CPS extrapolations for the reference values has negligible impact on the bench- marking outcomes. This means we can particularly recommend CPS(5,6) as an al- ternative to standard TightPNO settings for calculating reference values, increasing the applicability of DLPNO-CCSD(T) in benchmarking reaction energies and bar- rier heights of larger models of organic en- zymes. The DLPNO-CCSD(T)/CPS(6,7) energies for ENZYMES22 are finally pre- sented as the updated reference values for the set, reflecting the recent improvements in the method.
- Open Access
- 9 November 2023
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 19 (22) , 8365-8383
Benchmarking Density Functional Theory Methods for Metalloenzyme Reactions: The Introduction of the MME55 Set
We present a new benchmark set of metalloenzyme model reaction energies and barrier heights that we call MME55. The set contains 10 different enzymes, representing eight transition metals, both open and closed shell systems, and system sizes of up to 116 atoms. We use four DLPNO-CCSD(T)-based approaches to calculate reference values against which we then benchmark the performance of a range of density functional approximations with and without dispersion corrections. Dispersion corrections improve the results across the board, and triple-ζ basis sets provide the best balance of efficiency and accuracy. Jacob's ladder is reproduced for the whole set based on averaged mean absolute (percent) deviations, with the double hybrids SOS0-PBE0-2-D3(BJ) and revDOD-PBEP86-D4 standing out as the most accurate methods for the MME55 set. The range-separated hybrids ωB97M-V and ωB97X-V also perform well here and can be recommended as a reliable compromise between accuracy and efficiency; they have already been shown to be robust across many other types of chemical problems, as well. Despite the popularity of B3LYP in computational enzymology, it is not a strong performer on our benchmark set, and we discourage its use for enzyme energetics.
- 9 November 2023
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 19 (22) , 8365-8383
Open AccessBenchmarking Density Functional Theory Methods for Metalloenzyme Reactions: The Introduction of the MME55 Set
We present a new benchmark set of metalloenzyme model reaction energies and barrier heights that we call MME55. The set contains 10 different enzymes, representing eight transition metals, both open and closed shell systems, and system sizes of up to 116 atoms. We use four DLPNO-CCSD(T)-based approaches to calculate reference values against which we then benchmark the performance of a range of density functional approximations with and without dispersion corrections. Dispersion corrections improve the results across the board, and triple-ζ basis sets provide the best balance of efficiency and accuracy. Jacob's ladder is reproduced for the whole set based on averaged mean absolute (percent) deviations, with the double hybrids SOS0-PBE0-2-D3(BJ) and revDOD-PBEP86-D4 standing out as the most accurate methods for the MME55 set. The range-separated hybrids ωB97M-V and ωB97X-V also perform well here and can be recommended as a reliable compromise between accuracy and efficiency; they have already been shown to be robust across many other types of chemical problems, as well. Despite the popularity of B3LYP in computational enzymology, it is not a strong performer on our benchmark set, and we discourage its use for enzyme energetics.
- Open Access
- 25 September 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Benchmarking Density Functional Theory Methods for Metalloenzyme Reactions: The Introduction of the MME55 Set
We present a new benchmark set of metalloenzyme model reaction energies and barrier heights, which we call MME55. The set contains ten different enzymes, representing eight transition metals, both open and closed shell systems, and system sizes of up to 116 atoms. We use four DLPNO-CCSD(T)-based approaches to calculate reference values, against which we then benchmark the performance of a range of density functional approximations with and without dispersion corrections. Dispersion corrections improve the results across the board, and triple-ζ basis sets provide the best balance of efficiency and accuracy. Jacob's ladder is reproduced for the whole set based on averaged mean absolute (percentage) deviations, with the double hybrids SOS0-PBE0-2-D3(BJ) and revDOD-PBEP86-D4 standing out as the most accurate methods for the MME55 set. The range-separated hybrids ωB97M-V and ωB97X-V also perform well here and can be recommended as a reliable compromise between accuracy and efficiency; they have already been shown to be robust across many other types of chemical problems as well. Despite the popularity of B3LYP in computational enzymology, it is not a strong performer on our benchmark set, and we discourage its use for enzyme energetics.
- 25 September 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessBenchmarking Density Functional Theory Methods for Metalloenzyme Reactions: The Introduction of the MME55 Set
We present a new benchmark set of metalloenzyme model reaction energies and barrier heights, which we call MME55. The set contains ten different enzymes, representing eight transition metals, both open and closed shell systems, and system sizes of up to 116 atoms. We use four DLPNO-CCSD(T)-based approaches to calculate reference values, against which we then benchmark the performance of a range of density functional approximations with and without dispersion corrections. Dispersion corrections improve the results across the board, and triple-ζ basis sets provide the best balance of efficiency and accuracy. Jacob's ladder is reproduced for the whole set based on averaged mean absolute (percentage) deviations, with the double hybrids SOS0-PBE0-2-D3(BJ) and revDOD-PBEP86-D4 standing out as the most accurate methods for the MME55 set. The range-separated hybrids ωB97M-V and ωB97X-V also perform well here and can be recommended as a reliable compromise between accuracy and efficiency; they have already been shown to be robust across many other types of chemical problems as well. Despite the popularity of B3LYP in computational enzymology, it is not a strong performer on our benchmark set, and we discourage its use for enzyme energetics.
- 24 May 2021
- Published by Springer Nature in Theoretical Chemistry Accounts
- Vol. 140 (6) , 1-15
A guide to benchmarking enzymatically catalysed reactions: the importance of accurate reference energies and the chemical environment
- 24 May 2021
- Published by Springer Nature in Theoretical Chemistry Accounts
- Vol. 140 (6) , 1-15
A guide to benchmarking enzymatically catalysed reactions: the importance of accurate reference energies and the chemical environment
- Open Access
- 17 December 2020
- Published by American Chemical Society (ACS) in ChemRxiv
A Guide to Benchmarking Enzymatically Catalysed Reactions: The Importance of Accurate Reference Energies and the Chemical Environment
We explore two significant factors on the outcomes of benchmark studies for enzymatically catalysed reactions, namely the level of theory of the benchmarks and the size of the model system used to represent the enzyme active site. For the benchmarks, we compare two potential alternatives to canonical coupled cluster results for situations where CCSD(T) is computationally too demanding: a strategy to estimate finite basis set coupled cluster values and the local-correlation DLPNO-CCSD(T) method at the complete basis set limit. We confirm the high accuracy of DLPNO-CCSD(T) used with tight thresholds. We also show that notable differences can be seen when using both sets of references for a benchmark study, with absolute deviations from the higher quality references generally smaller than those from lowerquality ones as well as changes in the ranking of the assessed methods. For geometries, we test three models for the active site of 4-oxalocrotonate tautomerase: one typical of the QM region that may be used in QM/MM studies, and two smaller variants that neglect the surrounding chemical environment. Benchmarking of 12 density functionals known to perform well on enzymatically catalysed reactions shows inconsistent performance of each method across the three models, contradicting the common idea that small representative systems can be used to accurately assess the applicability of low-level methods for larger biochemical applications. Our findings shall serve as a reminder on the standards that should be adhered to in benchmark studies, and as a guide for future studies, both on enzyme-related and other chemical problems.
- 17 December 2020
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessA Guide to Benchmarking Enzymatically Catalysed Reactions: The Importance of Accurate Reference Energies and the Chemical Environment
We explore two significant factors on the outcomes of benchmark studies for enzymatically catalysed reactions, namely the level of theory of the benchmarks and the size of the model system used to represent the enzyme active site. For the benchmarks, we compare two potential alternatives to canonical coupled cluster results for situations where CCSD(T) is computationally too demanding: a strategy to estimate finite basis set coupled cluster values and the local-correlation DLPNO-CCSD(T) method at the complete basis set limit. We confirm the high accuracy of DLPNO-CCSD(T) used with tight thresholds. We also show that notable differences can be seen when using both sets of references for a benchmark study, with absolute deviations from the higher quality references generally smaller than those from lowerquality ones as well as changes in the ranking of the assessed methods. For geometries, we test three models for the active site of 4-oxalocrotonate tautomerase: one typical of the QM region that may be used in QM/MM studies, and two smaller variants that neglect the surrounding chemical environment. Benchmarking of 12 density functionals known to perform well on enzymatically catalysed reactions shows inconsistent performance of each method across the three models, contradicting the common idea that small representative systems can be used to accurately assess the applicability of low-level methods for larger biochemical applications. Our findings shall serve as a reminder on the standards that should be adhered to in benchmark studies, and as a guide for future studies, both on enzyme-related and other chemical problems.
- 29 January 2020
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 124 (5) , 1062
Erratum to “Toward a Quantum-Chemical Benchmark Set for Enzymatically Catalyzed Reactions: Important Steps and Insights”
- 29 January 2020
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 124 (5) , 1062
Erratum to “Toward a Quantum-Chemical Benchmark Set for Enzymatically Catalyzed Reactions: Important Steps and Insights”
- 17 July 2019
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 123 (32) , 7057-7074
Toward a Quantum-Chemical Benchmark Set for Enzymatically Catalyzed Reactions: Important Steps and Insights
We present steps toward the construction of a quantum-chemical benchmark set for enzymatically catalyzed reactions comprising different-quite sizable-model systems for five reactions. Our work is inspired by a study of semiempirical molecular-orbital theory methods against B3LYP-based structures and energies [Kromann et al. PeerJ 2016, 4, e1994]. Taking the same model systems, we herein demonstrate first how adequate treatments of London dispersion and basis-set superposition error lead to structural differences compared to structures obtained at the popular B3LYP/6-31G(d,p) level. The changes observed by us have a significant influence on the final reaction barrier heights (BHs) and energies (REs), which are our main focus herein. We then proceed and carefully investigate different strategies to obtain either exact or estimated complete-basis-set BHs and REs with the help of the DLPNO-CCSD(T) approach, which offers an exciting path into exploring larger biochemically relevant structures at the coupled cluster level. On the basis of our analysis, we present three strategies for obtaining reliable values. While these recommendations constitute our main findings and are meant to be used as useful guidelines for others in the field, we demonstrate their applicability in a preliminary benchmark set comprising 16 BHs and 12 REs on which we assess 35 density functional theory (DFT) approximations. This preliminary benchmark study was used as an indicator for the validity of our approach toward generating such a benchmark set, based on the fact that we were able to reproduce major recommendations in the field of modern DFT, such as the reproduction of the famous Jacob's Ladder scheme, while also pointing out subtle differences to previous benchmark studies. We end our study by critically assessing the still popular choice to gauge the accuracy of low-level methods against B3LYP data, and we show the risks of such a strategy, adding to the ever-growing list of calls to move away from B3LYP as a standard black-box approach.
- 17 July 2019
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 123 (32) , 7057-7074
Toward a Quantum-Chemical Benchmark Set for Enzymatically Catalyzed Reactions: Important Steps and Insights
We present steps toward the construction of a quantum-chemical benchmark set for enzymatically catalyzed reactions comprising different-quite sizable-model systems for five reactions. Our work is inspired by a study of semiempirical molecular-orbital theory methods against B3LYP-based structures and energies [Kromann et al. PeerJ 2016, 4, e1994]. Taking the same model systems, we herein demonstrate first how adequate treatments of London dispersion and basis-set superposition error lead to structural differences compared to structures obtained at the popular B3LYP/6-31G(d,p) level. The changes observed by us have a significant influence on the final reaction barrier heights (BHs) and energies (REs), which are our main focus herein. We then proceed and carefully investigate different strategies to obtain either exact or estimated complete-basis-set BHs and REs with the help of the DLPNO-CCSD(T) approach, which offers an exciting path into exploring larger biochemically relevant structures at the coupled cluster level. On the basis of our analysis, we present three strategies for obtaining reliable values. While these recommendations constitute our main findings and are meant to be used as useful guidelines for others in the field, we demonstrate their applicability in a preliminary benchmark set comprising 16 BHs and 12 REs on which we assess 35 density functional theory (DFT) approximations. This preliminary benchmark study was used as an indicator for the validity of our approach toward generating such a benchmark set, based on the fact that we were able to reproduce major recommendations in the field of modern DFT, such as the reproduction of the famous Jacob's Ladder scheme, while also pointing out subtle differences to previous benchmark studies. We end our study by critically assessing the still popular choice to gauge the accuracy of low-level methods against B3LYP data, and we show the risks of such a strategy, adding to the ever-growing list of calls to move away from B3LYP as a standard black-box approach.