Serkan Öztürk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Serkan Öztürk has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
- Ayhan Yıldırım
Department of Chemistry, Bursa Uludağ University, Bursa, Turkey
8 shared publications Gülşen Akgül
Department of Chemistry, Faculty of Arts and Sciences, Bursa Uludag University, Bursa, Türkiye
3 shared publicationsAyhan Yıldırım
2 shared publicationsFatih Şeker
Department of Chemistry, Institute of Science and Technology, Bursa Uludag University, Bursa, Türkiye
2 shared publicationsGökhan Gece
Department of Chemistry, Faculty of Engineering and Natural Sciences , Bursa Technical University , 16310 , Bursa , Türkiye
2 shared publications- Gökhan Gece
Bursa Technical University
2 shared publications
Latest Publications
- 9 November 2026
- Published by Wiley in Journal of Surfactants and Detergents
Low‐Concentration Corrosion Inhibition of Carbon Steel in 1.0 M HCl by a Tricationic Pyridinium Surfactant: Experimental and DFT Insights
A tricationic surfactant containing pyridinium and quaternary ammonium centers, denoted mono16‐diN + ‐PyN + , was synthesized and evaluated as a corrosion inhibitor for carbon steel in 1.0 M HCl. Its structure was confirmed by FT‐IR and 1 H NMR spectroscopy, while its inhibition performance was investigated by gravimetric, electrochemical, contact‐angle, adsorption, surface, and density functional theory analyses. Gravimetric measurements showed inhibition efficiencies of 98.80%–99.48% over the investigated immersion periods, even at very low inhibitor concentrations. Electrochemical impedance spectroscopy revealed an increase in charge–transfer resistance from 165.5 Ω for the blank solution to 1238 Ω at 10 ppm, accompanied by a marked decrease in double‐layer capacitance, indicating formation of a protective adsorbed layer. Potentiodynamic polarization confirmed mixed‐type inhibition: at 10 ppm, the corrosion current density decreased from 492 to 37.4 μA cm −2 and the corrosion rate from 5.71 to 0.43 mm year −1 , corresponding to an inhibition efficiency of 92.4%. The water contact angle increased from 17.15° to 71.50°, demonstrating enhanced surface hydrophobicity after adsorption. The adsorption behavior was best described by the Langmuir isotherm, and negative Δ G ° ads values indicated spontaneous adsorption involving electrostatic and charge–transfer interactions. SEM, EDS, and Gwyddion‐derived 3D surface profiles showed reduced surface damage and fewer corrosion products in the presence of the inhibitor. DFT results further indicated that the heteroatom‐rich head group, pyridinium unit, cationic centers, and hydrophobic alkyl chain contribute synergistically to adsorption and barrier formation. These findings demonstrate that mono16‐diN + ‐PyN + provides highly effective corrosion protection at low concentrations.
- 9 November 2026
- Published by Wiley in Journal of Surfactants and Detergents
Low‐Concentration Corrosion Inhibition of Carbon Steel in 1.0 M HCl by a Tricationic Pyridinium Surfactant: Experimental and DFT Insights
A tricationic surfactant containing pyridinium and quaternary ammonium centers, denoted mono16‐diN + ‐PyN + , was synthesized and evaluated as a corrosion inhibitor for carbon steel in 1.0 M HCl. Its structure was confirmed by FT‐IR and 1 H NMR spectroscopy, while its inhibition performance was investigated by gravimetric, electrochemical, contact‐angle, adsorption, surface, and density functional theory analyses. Gravimetric measurements showed inhibition efficiencies of 98.80%–99.48% over the investigated immersion periods, even at very low inhibitor concentrations. Electrochemical impedance spectroscopy revealed an increase in charge–transfer resistance from 165.5 Ω for the blank solution to 1238 Ω at 10 ppm, accompanied by a marked decrease in double‐layer capacitance, indicating formation of a protective adsorbed layer. Potentiodynamic polarization confirmed mixed‐type inhibition: at 10 ppm, the corrosion current density decreased from 492 to 37.4 μA cm −2 and the corrosion rate from 5.71 to 0.43 mm year −1 , corresponding to an inhibition efficiency of 92.4%. The water contact angle increased from 17.15° to 71.50°, demonstrating enhanced surface hydrophobicity after adsorption. The adsorption behavior was best described by the Langmuir isotherm, and negative Δ G ° ads values indicated spontaneous adsorption involving electrostatic and charge–transfer interactions. SEM, EDS, and Gwyddion‐derived 3D surface profiles showed reduced surface damage and fewer corrosion products in the presence of the inhibitor. DFT results further indicated that the heteroatom‐rich head group, pyridinium unit, cationic centers, and hydrophobic alkyl chain contribute synergistically to adsorption and barrier formation. These findings demonstrate that mono16‐diN + ‐PyN + provides highly effective corrosion protection at low concentrations.
- Open Access
- 1 January 2026
- Published by Walter de Gruyter GmbH in Corrosion Reviews
- Vol. 44 (1)
Probing the inhibition superiority of a novel vanillin derivative tri-cationic surfactant for mild steel corrosion in 1 M HCl
In this research, two novel tri-cationic surfactant derivatives were synthesized, stemming from vanillin – a compound employed as a sweetener in the food and beverage industry, a flavoring agent in perfumery, and an odor masking substance in cleaning products and animal feed. The structural characteristics of these synthesized compounds were unequivocally confirmed by FT-IR, 1 H NMR, and 13 C NMR spectroscopic analyses. Furthermore, their efficacy in inhibiting the corrosion of St37 steel was systematically evaluated by integrating gravimetric (weight-loss) measurements with complementary electrochemical techniques. For the corrosion experiments, 1 M HCl was selected as the corrosive medium, and solutions were prepared with inhibitor concentrations set at 1, 5, 10, 50, and 100 ppm. Potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) measurements were conducted during the electrochemical tests to ascertain the performance of the prepared inhibitors. High inhibition efficiency values, reaching up to 98.7 %, were obtained at the optimum inhibitor concentration of 100 ppm. The adsorption behavior was observed to be consistent with the Langmuir isotherm model. Additionally, theoretical calculations (DFT) were utilized to explore the correlation between the molecular structure of the inhibitors and their corrosion inhibition effectiveness. The results unequivocally demonstrate that these two newly synthesized vanillin derivative tri-cationic surfactants function as highly effective corrosion inhibitors for St37 steel within a 1 M HCl solution.
- 1 January 2026
- Published by Walter de Gruyter GmbH in Corrosion Reviews
- Vol. 44 (1)
Open AccessProbing the inhibition superiority of a novel vanillin derivative tri-cationic surfactant for mild steel corrosion in 1 M HCl
In this research, two novel tri-cationic surfactant derivatives were synthesized, stemming from vanillin – a compound employed as a sweetener in the food and beverage industry, a flavoring agent in perfumery, and an odor masking substance in cleaning products and animal feed. The structural characteristics of these synthesized compounds were unequivocally confirmed by FT-IR, 1 H NMR, and 13 C NMR spectroscopic analyses. Furthermore, their efficacy in inhibiting the corrosion of St37 steel was systematically evaluated by integrating gravimetric (weight-loss) measurements with complementary electrochemical techniques. For the corrosion experiments, 1 M HCl was selected as the corrosive medium, and solutions were prepared with inhibitor concentrations set at 1, 5, 10, 50, and 100 ppm. Potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) measurements were conducted during the electrochemical tests to ascertain the performance of the prepared inhibitors. High inhibition efficiency values, reaching up to 98.7 %, were obtained at the optimum inhibitor concentration of 100 ppm. The adsorption behavior was observed to be consistent with the Langmuir isotherm model. Additionally, theoretical calculations (DFT) were utilized to explore the correlation between the molecular structure of the inhibitors and their corrosion inhibition effectiveness. The results unequivocally demonstrate that these two newly synthesized vanillin derivative tri-cationic surfactants function as highly effective corrosion inhibitors for St37 steel within a 1 M HCl solution.
- 1 June 2024
- Published by Pleiades Publishing Ltd in Protection of Metals and Physical Chemistry of Surfaces
- Vol. 60 (3) , 519-534
Effective Tricationic Surfactants that Prevent Oxidation of Iron Atoms on the Metal Surface in Acidic Environment
One of the methods that can avoid the rapid corrosion of the metal surface, which occurs when iron atoms on steel surface are oxidized in an acidic environment, is to use suitable inhibitors. From this point of view, in this study, 4 tricationic surfactants containing long chains of 14 to 16 carbons at the end of the compound and 6 to 11 carbons in the middle of the compound were synthesized. The FT-IR and NMR spectra confirmed the chemical formulas of these surfactants. The surfactants’ physicochemical parameters (critical micelle concentrations, surface tensions at these concentrations and Gibbs free energies of micelle formation) were determined. Then, their effectiveness against the corrosion of the metal surface by iron atoms’ oxidation in 1.0 M HCl solution was measured by gravimetric method. For this purpose, metal coupons were immersed in acid solutions with and without inhibitors for twenty-four hours at room temperature. Very good inhibition efficiencies (around 95–97%) were obtained for different inhibitor concentrations (1, 5, 10, 25, 50, 100, 250 ppm) in the rust tests. The equilibrium constants (Kads) and Gibbs free energies (ΔGads) of their adsorption on the metal surface, which are the reason for these strong inhibition activities, were calculated by Langmuir Isotherm studies. To support their anticorrosion activity, the metal surfaces’ contact angles and scanning electron microscopy images with 1000 times magnification were obtained.
- 1 June 2024
- Published by Pleiades Publishing Ltd in Protection of Metals and Physical Chemistry of Surfaces
- Vol. 60 (3) , 519-534
Effective Tricationic Surfactants that Prevent Oxidation of Iron Atoms on the Metal Surface in Acidic Environment
One of the methods that can avoid the rapid corrosion of the metal surface, which occurs when iron atoms on steel surface are oxidized in an acidic environment, is to use suitable inhibitors. From this point of view, in this study, 4 tricationic surfactants containing long chains of 14 to 16 carbons at the end of the compound and 6 to 11 carbons in the middle of the compound were synthesized. The FT-IR and NMR spectra confirmed the chemical formulas of these surfactants. The surfactants’ physicochemical parameters (critical micelle concentrations, surface tensions at these concentrations and Gibbs free energies of micelle formation) were determined. Then, their effectiveness against the corrosion of the metal surface by iron atoms’ oxidation in 1.0 M HCl solution was measured by gravimetric method. For this purpose, metal coupons were immersed in acid solutions with and without inhibitors for twenty-four hours at room temperature. Very good inhibition efficiencies (around 95–97%) were obtained for different inhibitor concentrations (1, 5, 10, 25, 50, 100, 250 ppm) in the rust tests. The equilibrium constants (Kads) and Gibbs free energies (ΔGads) of their adsorption on the metal surface, which are the reason for these strong inhibition activities, were calculated by Langmuir Isotherm studies. To support their anticorrosion activity, the metal surfaces’ contact angles and scanning electron microscopy images with 1000 times magnification were obtained.
- 1 April 2024
- Published by Pleiades Publishing Ltd in Protection of Metals and Physical Chemistry of Surfaces
- Vol. 60 (2) , 343-353
Synthesis of Dicationic Surfactants Containing a Long Chain in One of the Two Pyridinium Nitrogen in the Structure and Investigation of their Anticorrosion Properties
In this study, five surfactants containing two pyridinium groups and one of which has a carbon chain of different lengths were synthesized in order to counteract the corrosion that occurs more rapidly on the metal surface in acidic environment. By using spectroscopic methods (FT-IR and NMR), the products’ chemical structures were verified. Gravimetric measurements were then applied to assess how well they resisted metal corrosion. The experiment involved immersing metal plates in 1.0 M HCl solutions with varying inhibitor concentrations for a day at room temperature. The weight loss of each plate was then measured. By utilizing these weight losses, both corrosion rate and corrosion inhibition efficiency were calculated. As a result of the calculations, it was realized that their ability to inhibit metal corrosion gradually increased due to the decrease in corrosion rates as the long carbon chain in their structure increased. However, in order to determine the type of adsorption on the metal surface, which is a factor directly affecting their corrosion inhibition, a Langmuir adsorption isotherm study was performed, which was found to be compatible. In order to visually support that they protect the metal surface against corrosion, 1600-fold magnified surface images of the metal surfaces removed from the corrosion test were taken with an optical microscope camera.
- 1 April 2024
- Published by Pleiades Publishing Ltd in Protection of Metals and Physical Chemistry of Surfaces
- Vol. 60 (2) , 343-353
Synthesis of Dicationic Surfactants Containing a Long Chain in One of the Two Pyridinium Nitrogen in the Structure and Investigation of their Anticorrosion Properties
In this study, five surfactants containing two pyridinium groups and one of which has a carbon chain of different lengths were synthesized in order to counteract the corrosion that occurs more rapidly on the metal surface in acidic environment. By using spectroscopic methods (FT-IR and NMR), the products’ chemical structures were verified. Gravimetric measurements were then applied to assess how well they resisted metal corrosion. The experiment involved immersing metal plates in 1.0 M HCl solutions with varying inhibitor concentrations for a day at room temperature. The weight loss of each plate was then measured. By utilizing these weight losses, both corrosion rate and corrosion inhibition efficiency were calculated. As a result of the calculations, it was realized that their ability to inhibit metal corrosion gradually increased due to the decrease in corrosion rates as the long carbon chain in their structure increased. However, in order to determine the type of adsorption on the metal surface, which is a factor directly affecting their corrosion inhibition, a Langmuir adsorption isotherm study was performed, which was found to be compatible. In order to visually support that they protect the metal surface against corrosion, 1600-fold magnified surface images of the metal surfaces removed from the corrosion test were taken with an optical microscope camera.
- 10 November 2023
- Published by Elsevier in Colloids and Surfaces A: Physicochemical and Engineering Aspects
- Vol. 681
Synthesis, characterization, and studies of the interfacial and anticorrosion properties of a ternary cationic ionic liquid on carbon steel in a molar concentration of hydrochloric acid: Experimental and computational insights
- 10 November 2023
- Published by Elsevier in Colloids and Surfaces A: Physicochemical and Engineering Aspects
- Vol. 681
Synthesis, characterization, and studies of the interfacial and anticorrosion properties of a ternary cationic ionic liquid on carbon steel in a molar concentration of hydrochloric acid: Experimental and computational insights
- 2 November 2023
- Published by Pleiades Publishing Ltd in Protection of Metals and Physical Chemistry of Surfaces
- Vol. 59 (5) , 998-1009
Synthesis of Di- and Tricationic Surfactants and Comparison of Their Activity on Oxidation of Metal in HCl Media
In this study, two surfactants with the same long chain were synthesized. One shows dicationic and the other tricationic properties. Various spectroscopic methods such as FT-IR, 1H NMR and 13C NMR were used to confirm the structures of the synthesized surfactants. The inhibition activities of two synthesized surfactants against mild steel corrosion in 1.0 M HCl solution were determined using the weight loss method. The 24-h corrosion tests on metal coupons immersed in acidic solutions were carried out using different inhibitor concentrations and similar and successful inhibition was obtained for both surfactants. Current density was determined by potentiodynamic polarization at a single inhibitor concentration to compare with the inhibition efficiency results obtained by decrease in weight method. Based on the current density, the inhibition efficiencies of the surfactants were calculated by Tafel extrapolation method. The inhibition efficiency results obtained by both weight loss and Tafel method were close and consistent. According to both methods, the corrosion inhibition of dicationic surfactant was slightly better than that of tricationic surfactant. By determining the critical micelle concentration for the two surfactants, some physicochemical parameters such as surface tensions and free energy of micelle formation at this concentration were calculated and correlated with their corrosion inhibitory activity. Scanning electron microscopy was used to ascertain the surface roughness conditions of metals submerged in an acidic solution, thus visually proving that surfactants protect the metal surface from corrosion.
- 2 November 2023
- Published by Pleiades Publishing Ltd in Protection of Metals and Physical Chemistry of Surfaces
- Vol. 59 (5) , 998-1009
Synthesis of Di- and Tricationic Surfactants and Comparison of Their Activity on Oxidation of Metal in HCl Media
In this study, two surfactants with the same long chain were synthesized. One shows dicationic and the other tricationic properties. Various spectroscopic methods such as FT-IR, 1H NMR and 13C NMR were used to confirm the structures of the synthesized surfactants. The inhibition activities of two synthesized surfactants against mild steel corrosion in 1.0 M HCl solution were determined using the weight loss method. The 24-h corrosion tests on metal coupons immersed in acidic solutions were carried out using different inhibitor concentrations and similar and successful inhibition was obtained for both surfactants. Current density was determined by potentiodynamic polarization at a single inhibitor concentration to compare with the inhibition efficiency results obtained by decrease in weight method. Based on the current density, the inhibition efficiencies of the surfactants were calculated by Tafel extrapolation method. The inhibition efficiency results obtained by both weight loss and Tafel method were close and consistent. According to both methods, the corrosion inhibition of dicationic surfactant was slightly better than that of tricationic surfactant. By determining the critical micelle concentration for the two surfactants, some physicochemical parameters such as surface tensions and free energy of micelle formation at this concentration were calculated and correlated with their corrosion inhibitory activity. Scanning electron microscopy was used to ascertain the surface roughness conditions of metals submerged in an acidic solution, thus visually proving that surfactants protect the metal surface from corrosion.
- 1 August 2023
- Published by Pleiades Publishing Ltd in Protection of Metals and Physical Chemistry of Surfaces
- Vol. 59 (4) , 750-762
Newly Synthesized Pyridinium Salt Based Tricationic Surfactants as Corrosion Inhibitor for Carbon Steel in 1.0 M HCl Medium
Two pyridinium salt based tricationic surfactants were synthesized using quarternization reaction. The characterization of the surfactants were done by spectroscopic methods (FT-IR and NMR). Some pysicochemical properties like critical micelle concentration, surface tension at critical micelle concentration, Gibbs free energy of micelization, foam height, foam stability and emulsion stability were measured. The anticorrosion properties of the synthesized compounds were investigated by gravimetric measurements. In corrosion tests, where both compounds showed inhibitory activity against the corrosion of carbon steel in 1.0 M HCl environment, while the inhibition efficiency of the compound containing 6 carbon atoms in the long chain was determined in the range of 62–76%, those of the compound containing 8 carbon atoms in the long chain was found in the range of 85–93%. On the other hand, density functional theory (DFT) calculations were applied to arrive at basic molecular/electronic level scale details about the synthesized compounds, in addition to the surface images of the metal obtained by scanning electron microscopy to support the corrosion prevention results.
- 1 August 2023
- Published by Pleiades Publishing Ltd in Protection of Metals and Physical Chemistry of Surfaces
- Vol. 59 (4) , 750-762
Newly Synthesized Pyridinium Salt Based Tricationic Surfactants as Corrosion Inhibitor for Carbon Steel in 1.0 M HCl Medium
Two pyridinium salt based tricationic surfactants were synthesized using quarternization reaction. The characterization of the surfactants were done by spectroscopic methods (FT-IR and NMR). Some pysicochemical properties like critical micelle concentration, surface tension at critical micelle concentration, Gibbs free energy of micelization, foam height, foam stability and emulsion stability were measured. The anticorrosion properties of the synthesized compounds were investigated by gravimetric measurements. In corrosion tests, where both compounds showed inhibitory activity against the corrosion of carbon steel in 1.0 M HCl environment, while the inhibition efficiency of the compound containing 6 carbon atoms in the long chain was determined in the range of 62–76%, those of the compound containing 8 carbon atoms in the long chain was found in the range of 85–93%. On the other hand, density functional theory (DFT) calculations were applied to arrive at basic molecular/electronic level scale details about the synthesized compounds, in addition to the surface images of the metal obtained by scanning electron microscopy to support the corrosion prevention results.
- Open Access
- 30 April 2023
- Published by Duzce Universitesi Bilim ve Teknoloji Dergisi in Düzce Üniversitesi Bilim ve Teknoloji Dergisi
- Vol. 11 (2) , 812-828
İki Pozitif Azot Atomu İçeren Di-katyonik Yüzey Aktif Maddelerin Sentezi ve 1.0 M HCl Ortamında Korozyon İnhibisyon Etkinliklerinin İncelenmesi
Bu çalışmada, kimyasal yapısında iki adet pozitif yüklü kuaterner amonyum azotu içeren üç tane di-katyonik yüzey aktif madde sentezlenmiştir. Sentezlenen yüzey aktif maddelerin kimyasal yapıları çeşitli spektroskopik yöntemlerle (FT-IR, 1H NMR ve 13C NMR) ispatlanmıştır. Sentezlenen ve moleküler yapıları aydınlatılan 3 adet ürünün, 1.0 M HCl asidik ortamda, kütle kaybı yöntemi kullanılarak yumuşak çeliğin korozyonuna karşı inhibisyon etkinlikleri belirlenmiştir. Farklı inhibitör konsantrasyonlarına sahip asidik çözeltilere, metal kuponların, oda sıcaklığında 24 saat süreyle daldırılması suretiyle yapılan korozyon testleri sonucunda, her üç yüzey aktif madde için, birbirine yakın ve etkin inhibisyon verimleri elde edilmiştir. Moleküler yapılarında bulunan uzun karbon zincirindeki karbon sayısının fazlalığı korozyona karşı korumada etkin bir faktör olduğu gösterilmiştir. Uzun zincirindeki karbon sayısı en fazla olan inhibitörün asit ortamındaki korozyon inhibisyon etkinliğinin diğerlerine göre biraz daha yüksek olduğu tespit edilmiştir. Bunun yanı sıra, korozyona karşı etkinlikleri ile ilişkilendirmek adına, söz konusu di-katyonik yüzey aktif maddeler için kritik misel konsantrasyonu, bu konsantrasyondaki yüzey gerilimleri, misel oluşum serbest enerjisi, köpük kararlılığı gibi bazı fizikokimyasal parametreleri de hesaplama yoluna gidilmiştir. Yüzey aktif maddelerin metal yüzeyine adsorbe olarak yüzeyi korozyondan koruduklarının önemli bir destekleyici delili olan taramalı elektron mikroskobu (SEM) ile yüzey görüntüleri de alınmış ve asit çözeltisine daldırılan metal yüzeylerindeki pürüzlülük halleri belirlenmiştir.
- 30 April 2023
- Published by Duzce Universitesi Bilim ve Teknoloji Dergisi in Düzce Üniversitesi Bilim ve Teknoloji Dergisi
- Vol. 11 (2) , 812-828
Open Accessİki Pozitif Azot Atomu İçeren Di-katyonik Yüzey Aktif Maddelerin Sentezi ve 1.0 M HCl Ortamında Korozyon İnhibisyon Etkinliklerinin İncelenmesi
Bu çalışmada, kimyasal yapısında iki adet pozitif yüklü kuaterner amonyum azotu içeren üç tane di-katyonik yüzey aktif madde sentezlenmiştir. Sentezlenen yüzey aktif maddelerin kimyasal yapıları çeşitli spektroskopik yöntemlerle (FT-IR, 1H NMR ve 13C NMR) ispatlanmıştır. Sentezlenen ve moleküler yapıları aydınlatılan 3 adet ürünün, 1.0 M HCl asidik ortamda, kütle kaybı yöntemi kullanılarak yumuşak çeliğin korozyonuna karşı inhibisyon etkinlikleri belirlenmiştir. Farklı inhibitör konsantrasyonlarına sahip asidik çözeltilere, metal kuponların, oda sıcaklığında 24 saat süreyle daldırılması suretiyle yapılan korozyon testleri sonucunda, her üç yüzey aktif madde için, birbirine yakın ve etkin inhibisyon verimleri elde edilmiştir. Moleküler yapılarında bulunan uzun karbon zincirindeki karbon sayısının fazlalığı korozyona karşı korumada etkin bir faktör olduğu gösterilmiştir. Uzun zincirindeki karbon sayısı en fazla olan inhibitörün asit ortamındaki korozyon inhibisyon etkinliğinin diğerlerine göre biraz daha yüksek olduğu tespit edilmiştir. Bunun yanı sıra, korozyona karşı etkinlikleri ile ilişkilendirmek adına, söz konusu di-katyonik yüzey aktif maddeler için kritik misel konsantrasyonu, bu konsantrasyondaki yüzey gerilimleri, misel oluşum serbest enerjisi, köpük kararlılığı gibi bazı fizikokimyasal parametreleri de hesaplama yoluna gidilmiştir. Yüzey aktif maddelerin metal yüzeyine adsorbe olarak yüzeyi korozyondan koruduklarının önemli bir destekleyici delili olan taramalı elektron mikroskobu (SEM) ile yüzey görüntüleri de alınmış ve asit çözeltisine daldırılan metal yüzeylerindeki pürüzlülük halleri belirlenmiştir.
- 3 August 2022
- Published by Wiley in Journal of Surfactants and Detergents
- Vol. 25 (6) , 821-832
Synthesis of tri‐cationic surfactants containing two amide functional groups and inhibition effectiveness against metal corrosion in acidic medium
- 3 August 2022
- Published by Wiley in Journal of Surfactants and Detergents
- Vol. 25 (6) , 821-832
Synthesis of tri‐cationic surfactants containing two amide functional groups and inhibition effectiveness against metal corrosion in acidic medium