Yongli Shen
Yongli Shen has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
Wei Xi
School of Chemical Engineering and Technology
7 shared publications- Wenjuan Yuan
School of Materials Science and Engineering
6 shared publications - Changhua An
Tianjin Key Laboratory of Organic Solar Cells and Photochemical Conversion, School of Chemistry and Chemical Engineering, Institute of New Energy Materials & Low-Carbon Technologies, Tianjin University of Technology, Tianjin 300384, China
4 shared publications Lin Gu
School of Chemical Engineering and Technology
4 shared publicationsYufeng Yang
Institute for New Energy Materials and Low Carbon Technologies, School of Materials Science and Engineering
4 shared publicationsChanghua An
School of Chemistry and Chemical Engineering
3 shared publications
Latest Publications
- 19 January 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (4) , 3562-3572
From Local Strain to Global Reactivity: Surface Microstructures of Gold Nanoparticles Regulate the Adsorption and Activation of Small Molecules
In this study, we examined the relationship between the surface strain characteristics of Au nanoparticles and the adsorption and activation of reactants using aberration-corrected transmission electron microscopy and density functional theory. The Au nanoparticle surface displayed macroscopic stability coupled with local dynamic distortions, featuring regions of both tensile and compressive strain. Tensile strain regions exhibited electron enrichment, whereas compressive strain regions exhibited electron depletion, thereby enhancing surface charge polarization. The adsorption and activation of O2 molecules were significantly enhanced in tensile strain regions compared to that in the standard Au surface. CO molecules preferentially adsorbed at electron-enriched sites, with the adsorption strength increasing as the strain magnitude increased. Water adsorption on the Au surface resulted in increased negative charge via charge transfer. These findings elucidate the interplay between geometric and electronic structures in surface strain architectures and provide insights for designing catalysts with regulated adsorption sites for small-molecule reactions, offering strategies for precise catalyst synthesis and efficient design.
- 19 January 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (4) , 3562-3572
From Local Strain to Global Reactivity: Surface Microstructures of Gold Nanoparticles Regulate the Adsorption and Activation of Small Molecules
In this study, we examined the relationship between the surface strain characteristics of Au nanoparticles and the adsorption and activation of reactants using aberration-corrected transmission electron microscopy and density functional theory. The Au nanoparticle surface displayed macroscopic stability coupled with local dynamic distortions, featuring regions of both tensile and compressive strain. Tensile strain regions exhibited electron enrichment, whereas compressive strain regions exhibited electron depletion, thereby enhancing surface charge polarization. The adsorption and activation of O2 molecules were significantly enhanced in tensile strain regions compared to that in the standard Au surface. CO molecules preferentially adsorbed at electron-enriched sites, with the adsorption strength increasing as the strain magnitude increased. Water adsorption on the Au surface resulted in increased negative charge via charge transfer. These findings elucidate the interplay between geometric and electronic structures in surface strain architectures and provide insights for designing catalysts with regulated adsorption sites for small-molecule reactions, offering strategies for precise catalyst synthesis and efficient design.
- 11 December 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (51) , 22454-22462
In Situ Observation of the Layer-by-Layer Melting of the Au(200) Surface in Nanoporous Gold
- 11 December 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (51) , 22454-22462
In Situ Observation of the Layer-by-Layer Melting of the Au(200) Surface in Nanoporous Gold
- 28 July 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (31) , 11888-11894
In Situ Observation of Reaction-Intermediate-Mediated Dynamic Evolution of Step Sites on Au(200) Surface
The surface structure of a metal catalyst is key to its catalytic activity and selectivity. Therefore, exploring its evolution during the catalytic reaction is vital. This study investigated the dynamic evolution of step sites on a nanoporous Au(200) surface during methane pyrolysis through in situ gas-phase transmission electron microscopy. The results indicated that the step structure migrated laterally on the surface during methane pyrolysis through a continuous process of disappearance and reconstruction. First-principles calculations revealed that adsorbed carbon species weakened the interactions between the Au atoms and their neighboring Au atoms, promoting their migration and release, which reconstructed the atomic structure of the step edge on the Au(200) surface. This study revealed profound insights into the mechanisms by which reaction intermediates induce the dynamic evolution of catalytic active sites during heterogeneous catalytic reactions. These findings provide a theoretical basis for designing and developing next-generation high-efficiency catalysts.
- 28 July 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (31) , 11888-11894
In Situ Observation of Reaction-Intermediate-Mediated Dynamic Evolution of Step Sites on Au(200) Surface
The surface structure of a metal catalyst is key to its catalytic activity and selectivity. Therefore, exploring its evolution during the catalytic reaction is vital. This study investigated the dynamic evolution of step sites on a nanoporous Au(200) surface during methane pyrolysis through in situ gas-phase transmission electron microscopy. The results indicated that the step structure migrated laterally on the surface during methane pyrolysis through a continuous process of disappearance and reconstruction. First-principles calculations revealed that adsorbed carbon species weakened the interactions between the Au atoms and their neighboring Au atoms, promoting their migration and release, which reconstructed the atomic structure of the step edge on the Au(200) surface. This study revealed profound insights into the mechanisms by which reaction intermediates induce the dynamic evolution of catalytic active sites during heterogeneous catalytic reactions. These findings provide a theoretical basis for designing and developing next-generation high-efficiency catalysts.
- 3 June 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (23) , 11712-11720
O–O Bond Homolysis Inhibition Strategy on B-g-C3N4 Boosts Selectivity for the Photosynthesis of H2O2
Photocatalytic oxygen reduction offers a green and sustainable route for hydrogen peroxide production. Among various photocatalysts, graphitic carbon nitride (g-C3N4) stands out owing to its low cost and tunable electronic structure. However, the competing four-electron O2 reduction reaction (ORR) to H2O significantly compromises the selectivity, posing a major challenge for practical applications. In this study, we propose a boron atom decoration strategy on carbon nitride tubes (BCN) to enhance H2O2 production. Combined experimental and theoretical analyses reveal that the incorporation of B atoms facilitates O2 adsorption and inhibits O-O bond homolysis, improving the selectivity of the two-electron ORR pathway to H2O2. Moreover, B atoms, acting as Lewis acid sites, stabilize the •O2- intermediate through acid-base interactions. As a result, the optimized BCN catalyst (BCN400) achieves a remarkable H2O2 yield of 30 μmol·h-1, representing a 4-fold increase in H2O2 production. This study provides a novel strategy for the design of photocatalysts with optimized active sites, offering significant potential for a wide range of applications in sustainable chemical production.
- 3 June 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (23) , 11712-11720
O–O Bond Homolysis Inhibition Strategy on B-g-C3N4 Boosts Selectivity for the Photosynthesis of H2O2
Photocatalytic oxygen reduction offers a green and sustainable route for hydrogen peroxide production. Among various photocatalysts, graphitic carbon nitride (g-C3N4) stands out owing to its low cost and tunable electronic structure. However, the competing four-electron O2 reduction reaction (ORR) to H2O significantly compromises the selectivity, posing a major challenge for practical applications. In this study, we propose a boron atom decoration strategy on carbon nitride tubes (BCN) to enhance H2O2 production. Combined experimental and theoretical analyses reveal that the incorporation of B atoms facilitates O2 adsorption and inhibits O-O bond homolysis, improving the selectivity of the two-electron ORR pathway to H2O2. Moreover, B atoms, acting as Lewis acid sites, stabilize the •O2- intermediate through acid-base interactions. As a result, the optimized BCN catalyst (BCN400) achieves a remarkable H2O2 yield of 30 μmol·h-1, representing a 4-fold increase in H2O2 production. This study provides a novel strategy for the design of photocatalysts with optimized active sites, offering significant potential for a wide range of applications in sustainable chemical production.
- 27 September 2024
- Published by American Chemical Society (ACS) in ACS Materials Letters
- Vol. 6 (11) , 4865-4872
Facilitating Dissociation–Diffusion–Desorption Process over Ru Nanoclusters Engineering hcp-Ni3Fe for Hydrogen Evolution at High Current Densities
- 27 September 2024
- Published by American Chemical Society (ACS) in ACS Materials Letters
- Vol. 6 (11) , 4865-4872
Facilitating Dissociation–Diffusion–Desorption Process over Ru Nanoclusters Engineering hcp-Ni3Fe for Hydrogen Evolution at High Current Densities
- 3 June 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (23)
One-step synthesis of self-assembled directed single-atom-thick gold film on semiconductor
Two-dimensional metal thin films have received extensive research attention owing to their distinctive physical and chemical properties. The direct synthesis of highly anisotropic monatomic metal layers is challenging owing to the symmetric non-oriented bonds of metals. In this study, we present a one-step synthesis method for preparing single-atom-thick gold films via high-temperature heating. During substrate synthesis, the surface-hanging bonds anchor the gold atoms individually, resulting in self-assembled loaded monolayer gold films. Density function theory calculations show that gold atoms prefer to anchor along the chain direction, resulting in monolayer films with good homogeneity and stability. The electronic structure of these films is completely different from that of bulk gold. This property may endow the films with potential for applications in magnetism, optics, and catalysis.
- 3 June 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (23)
One-step synthesis of self-assembled directed single-atom-thick gold film on semiconductor
Two-dimensional metal thin films have received extensive research attention owing to their distinctive physical and chemical properties. The direct synthesis of highly anisotropic monatomic metal layers is challenging owing to the symmetric non-oriented bonds of metals. In this study, we present a one-step synthesis method for preparing single-atom-thick gold films via high-temperature heating. During substrate synthesis, the surface-hanging bonds anchor the gold atoms individually, resulting in self-assembled loaded monolayer gold films. Density function theory calculations show that gold atoms prefer to anchor along the chain direction, resulting in monolayer films with good homogeneity and stability. The electronic structure of these films is completely different from that of bulk gold. This property may endow the films with potential for applications in magnetism, optics, and catalysis.
- 2 May 2024
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 14 (10) , 7674-7683
Modulating Alcohol Adsorption Modes for Boosting Electrooxidation-Assisted Hydrogen Production
- 2 May 2024
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 14 (10) , 7674-7683
Modulating Alcohol Adsorption Modes for Boosting Electrooxidation-Assisted Hydrogen Production
- 25 April 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (18) , 5618-5624
In Situ TEM Tracking of Disconnection Motion and Atomic Cooperative Reorientation in the Oriented Attachment of Pt Nanoparticles
The oriented attachment (OA) of nanoparticles (NPs) is an important crystal growth mechanism in many materials. However, a comprehensive understanding of the atomic-scale alignment and attachment processes is still lacking. We conducted in situ atomic resolution studies using high-resolution transmission electron microscopy to reveal how two Pt NPs coalesce into a single particle via OA, which involves the formation of atomic-scale links and a grain boundary (GB) between the NPs, as well as GB migration. Density functional theory calculations showed that the system energy changes as a function of the number of disconnections during the coalescence process. Additionally, the formation and annihilation processes of disconnection are always accompanied by the cooperative reorientation motion of atoms. These results further elucidate the growth mechanism of OA at the atomic scale, providing microscopic insights into OA dynamics and a framework for the development of processing strategies for nanocrystalline materials.
- 25 April 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (18) , 5618-5624
In Situ TEM Tracking of Disconnection Motion and Atomic Cooperative Reorientation in the Oriented Attachment of Pt Nanoparticles
The oriented attachment (OA) of nanoparticles (NPs) is an important crystal growth mechanism in many materials. However, a comprehensive understanding of the atomic-scale alignment and attachment processes is still lacking. We conducted in situ atomic resolution studies using high-resolution transmission electron microscopy to reveal how two Pt NPs coalesce into a single particle via OA, which involves the formation of atomic-scale links and a grain boundary (GB) between the NPs, as well as GB migration. Density functional theory calculations showed that the system energy changes as a function of the number of disconnections during the coalescence process. Additionally, the formation and annihilation processes of disconnection are always accompanied by the cooperative reorientation motion of atoms. These results further elucidate the growth mechanism of OA at the atomic scale, providing microscopic insights into OA dynamics and a framework for the development of processing strategies for nanocrystalline materials.
- 12 January 2024
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 63 (4) , 2131-2137
Coordination Confined Thermolysis Synthesis of the Ni Single Atom Catalyst on the N-Doped Commercial Carbon for the Production of Syngas
The electrochemical conversion of CO2 into controllable syngas (CO/H2) over a wide potential range is challenging. The main electrocatalysts are based on the noble metals Au (Ag) or heavy metal Pb. The development of alternative nonprecious catalysts is of paramount importance for practice. In this work, a simple coordination confined thermal pyrolysis method has been developed for the synthesis of Ni single-atom catalyst loaded onto nitrogen-doped commercial carbon. The catalyst is in the form of NiN3-C, which exhibits a high-performance electrocatalytic reduction of CO2 toward producing syngas with Faraday efficiencies of 62.28% of CO and 36.7% of H2. The Gibbs free energies of COOH* and H* on the NiN3-C structure were estimated by using density functional theory (DFT). The formation of COOH* intermediate is the speed-limiting step in the process, with ΔG COOH* being 0.7 eV, while H* is the speed-limiting step in the hydrogen evolution, respectively. This work provides a feasible method for the achievement of nonprecious catalysts for the resourceful use of CO2.
- 12 January 2024
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 63 (4) , 2131-2137
Coordination Confined Thermolysis Synthesis of the Ni Single Atom Catalyst on the N-Doped Commercial Carbon for the Production of Syngas
The electrochemical conversion of CO2 into controllable syngas (CO/H2) over a wide potential range is challenging. The main electrocatalysts are based on the noble metals Au (Ag) or heavy metal Pb. The development of alternative nonprecious catalysts is of paramount importance for practice. In this work, a simple coordination confined thermal pyrolysis method has been developed for the synthesis of Ni single-atom catalyst loaded onto nitrogen-doped commercial carbon. The catalyst is in the form of NiN3-C, which exhibits a high-performance electrocatalytic reduction of CO2 toward producing syngas with Faraday efficiencies of 62.28% of CO and 36.7% of H2. The Gibbs free energies of COOH* and H* on the NiN3-C structure were estimated by using density functional theory (DFT). The formation of COOH* intermediate is the speed-limiting step in the process, with ΔG COOH* being 0.7 eV, while H* is the speed-limiting step in the hydrogen evolution, respectively. This work provides a feasible method for the achievement of nonprecious catalysts for the resourceful use of CO2.
- 10 May 2022
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 14 (22) , 8023-8027
Complete surface reconstruction of nanoporous gold during CH4 pyrolysis
The catalytic activity and selectivity of metallic nanocatalysts can be controlled using physical and chemical methods to tune the exposed crystal facets. Nanoporous metals (NPMs) have unique bicontinuous structures, large specific surface areas, and high catalytic activities, and are widely used in the field of heterogeneous catalysis. However, owing to the complex surface topography of NPMs, it is difficult to regulate their exposed crystal facets over a large area. In this study, nanoporous gold (NPG) is successfully prepared with a complete regular surface that exposes the Au {111} and {100} facets through a methane pyrolysis reaction. The results of high-spatial and -temporal resolution in situ experiments and theoretical calculations indicate that C species significantly weaken the interaction between surface Au atoms with low coordination numbers and their surrounding atoms, which results in the migration and recombination of surface atoms. This research fundamentally clarifies the reconstruction mechanism of porous materials during methane pyrolysis and provides a theoretical basis for the targeted regulation of exposed NPM surfaces.
- 10 May 2022
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 14 (22) , 8023-8027
Complete surface reconstruction of nanoporous gold during CH4 pyrolysis
The catalytic activity and selectivity of metallic nanocatalysts can be controlled using physical and chemical methods to tune the exposed crystal facets. Nanoporous metals (NPMs) have unique bicontinuous structures, large specific surface areas, and high catalytic activities, and are widely used in the field of heterogeneous catalysis. However, owing to the complex surface topography of NPMs, it is difficult to regulate their exposed crystal facets over a large area. In this study, nanoporous gold (NPG) is successfully prepared with a complete regular surface that exposes the Au {111} and {100} facets through a methane pyrolysis reaction. The results of high-spatial and -temporal resolution in situ experiments and theoretical calculations indicate that C species significantly weaken the interaction between surface Au atoms with low coordination numbers and their surrounding atoms, which results in the migration and recombination of surface atoms. This research fundamentally clarifies the reconstruction mechanism of porous materials during methane pyrolysis and provides a theoretical basis for the targeted regulation of exposed NPM surfaces.