PSPengyu Shi

Pengyu Shi

*This is an algorithmically generated author record based on publicly available information.

Pengyu Shi has a total of 40 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Flow past a fixed spherical droplet: breaking of axisymmetry by an internal flow bifurcation

    by Pengyu Shi, Éric Climent, Dominique Legendre

    Direct numerical simulations of a uniform flow past a fixed spherical droplet are performed to determine the parameter range within which the axisymmetric flow becomes unstable. The problem is governed by three dimensionless parameters: the drop-to-fluid dynamic viscosity ratio, $\mu ^\ast$ , and the external and internal Reynolds numbers, ${\textit{Re}}^e$ and ${\textit{Re}}^i$ , which are defined using the kinematic viscosities of the external and internal fluids, respectively. The present study confirms the existence of a regime at low-to-moderate viscosity ratio where the axisymmetric flow breaks down due to an internal flow instability. In the initial stages of this bifurcation, the external flow remains axisymmetric, while the asymmetry is generated and grows only inside the droplet. As the disturbance propagates outward, the entire flow first transits to a biplanar-symmetric flow, characterised by two pairs of counter-rotating streamwise vortices in the wake. A detailed examination of the flow field reveals that the vorticity on the internal side of the droplet interface is driving the flow instability. Specifically, the bifurcation sets in once the maximum internal vorticity exceeds a critical value that decreases with increasing ${\textit{Re}}^i$ . For sufficiently large ${\textit{Re}}^i$ , internal flow bifurcation may occur at viscosity ratios of $\mu ^\ast = {\mathcal{O}}(10)$ , an order of magnitude higher than previously reported values. Finally, we demonstrate that the internal flow bifurcation in the configuration of a fixed droplet in a uniform fluid stream is closely related to the first path instability experienced by a buoyant, deformable droplet of low-to-moderate $\mu ^\ast$ freely rising in a stagnant liquid.


  • Open Access

    Lateral migration and bouncing of a deformable bubble rising near a vertical wall. Part 2. Highly inertial regimes

    by Pengyu Shi, Jie Zhang, Jacques Magnaudet

    The fate of deformable buoyancy-driven bubbles rising near a vertical wall under highly inertial conditions is investigated numerically. In the absence of path instability, simulations reveal that, when the Galilei number, $Ga$ , which represents the buoyancy-to-viscous force ratio, exceeds a critical value, bubbles escape from the near-wall region after one to two bounces, while at smaller $Ga$ they perform periodic bounces without escaping. The escape mechanism is rooted in the vigorous rotational flow that forms around a bubble during its bounce at high enough $Ga$ , resulting in a Magnus-like repulsive force capable of driving it away from the wall. Path instability takes place with bubbles whose Bond number, the buoyancy-to-capillary force ratio, exceeds a critical $Ga$ -dependent value. Such bubbles may or may not escape from the wall region, depending on the competition between the classical repulsive wake–wall interaction mechanism and a specific wall-ward trapping mechanism. The latter results from the reduction of the bubble oblateness caused by the abrupt drop of the rise speed when the bubble–wall gap becomes very thin. Owing to this transient shape variation, bubbles exhibiting zigzagging motions with a large enough amplitude experience larger transverse drag and virtual mass forces when departing from the wall than when returning to it. With moderately oblate bubbles, i.e. in an intermediate Bond number range, this effect is large enough to counteract the repulsive interaction force, forcing such bubbles to perform a periodic zigzagging-like motion at a constant distance from the wall.


  • Open Access

    Flow past a fixed spherical droplet: breaking of axisymmetry by an internal flow bifurcation

    by Pengyu Shi, Éric Climent, Dominique Legendre

    Direct numerical simulations of a uniform flow past a fixed spherical droplet are performed to determine the parameter range within which the axisymmetric flow becomes unstable. The problem is governed by three dimensionless parameters: the drop-to-fluid dynamic viscosity ratio, $μ^\ast$, and the external and internal Reynolds numbers, $\Rey^e$ and $\Rey^i$, which are defined using the kinematic viscosities of the external and internal fluids, respectively. The present study confirms the existence of a regime at low-to-moderate viscosity ratio where the axisymmetric flow breaks down due to an internal flow instability. In the initial stages of this bifurcation, the external flow remains axisymmetric, while the asymmetry is generated and grows only inside the droplet. As the disturbance propagates outward, the entire flow first transits to a biplanar symmetric flow, characterised by two pairs of counter-rotating streamwise vortices in the wake. A detailed examination of the flow field reveals that the vorticity on the internal side of the droplet interface is driving the flow instability. Specifically, the bifurcation sets in once the maximum internal vorticity exceeds a critical value that decreases with increasing $\Rey^i$. For sufficiently large $\Rey^i$, internal flow bifurcation may occur at viscosity ratios of $μ^\ast = O(10)$, an order of magnitude higher than previously reported values. Finally, we demonstrate that the internal flow bifurcation in the configuration of a fixed droplet in a uniform fluid stream is closely related to the first path instability experienced by a buoyant, deformable droplet of low-to-moderate $μ^\ast$ freely rising in a stagnant liquid.


  • Open Access

    Lift force on a spherical droplet in a viscous linear shear flow

    by Pengyu Shi, Éric Climent, Dominique Legendre

    We study numerically the flow around a spherical droplet set fixed in a linear shear flow with moderate shear rates ( $Sr\leq 0.5$ , $Sr$ being the ratio between the velocity difference across the drop and the relative velocity) over a wide range of external Reynolds numbers ( $0.1<{{Re}}\leq 250$ , ${{Re}}$ based on the slip velocity and the viscosity of the external fluid) and drop-to-fluid viscosity ratios ( $0.01\leq \mu ^\ast \leq 100$ ). The flow structure, the vorticity field and their intrinsic connection with the lift force are analysed. Specifically, the results on lift force are compared with the low- ${{Re}}$ solution derived for droplets of arbitrary $\mu ^\ast$ , as well as prior data at finite ${{Re}}$ available in both the clean-bubble limit ( $\mu ^\ast \to 0$ ) and the solid-sphere limit ( $\mu ^\ast \to \infty$ ). Notably, at ${{Re}}=O(100)$ , the lift force exhibits a non-monotonic transition from $\mu ^\ast \to 0$ to $\mu ^\ast \to \infty$ , peaking at $\mu ^\ast \approx 1$ . This behaviour is related to an internal three-dimensional flow bifurcation also occurring under uniform-flow conditions, which makes the flow to evolve from axisymmetric to biplanar symmetric. This flow bifurcation occurs at low-but-finite $\mu ^\ast$ when the internal Reynolds number ( ${{Re}}^i$ , based on the viscosity of the internal fluid) exceeds approximately 300. In the presence of shear, the corresponding imperfect bifurcation enhances the extensional rate of the flow in the wake. Consequently, the streamwise vortices generated behind the droplet can be more intense compared with those behind a clean bubble. Given the close relation between the lift and these vortices, a droplet with ${{Re}}=O(100)$ and $\mu ^\ast \approx 1$ typically experiences a greater lift force than that in the inviscid limit.


  • Open Access

    Lateral migration and bouncing of a deformable bubble rising near a vertical wall. Part 1. Moderately inertial regimes

    by Pengyu Shi, Jie Zhang, Jacques Magnaudet

    The buoyancy-driven motion of a deformable bubble rising near a vertical hydrophilic wall is studied numerically. We focus on moderately inertial regimes in which the bubble undergoes low-to-moderate deformations and would rise in a straight line in the absence of the wall. Three different types of near-wall motion are observed, depending on the buoyancy-to-viscous and buoyancy-to-capillary force ratios defining the Galilei ( $Ga$ ) and Bond ( $Bo$ ) numbers of the system, respectively. For low enough $Ga$ or large enough $Bo$ , bubbles consistently migrate away from the wall. Conversely, for large enough $Ga$ and low enough $Bo$ , they perform periodic near-wall bounces. At intermediate $Ga$ and $Bo$ , they are first attracted to the wall down to a certain critical distance, and then perform bounces with a decreasing amplitude before stabilising at this critical separation. Periodic bounces are accompanied by the shedding of a pair of streamwise vortices in the wake, the formation of which is governed by the near-wall shear resulting from the no-slip condition. These vortices provide a repulsive force that overcomes the viscous resistance of the fluid to the departing motion, making the bubble capable of returning to the region where it is attracted again to the wall. Although periodic, the shedding/regeneration cycle of these vortices is highly asymmetric with respect to the lateral bubble displacements, vortices being shed when the gap left between the bubble and the wall reaches its maximum, and reborn only when this gap comes back to its minimum.


  • Open Access

    On the relevance of lift force modelling in turbulent wall flows with small inertial particles

    by Wei Gao, Pengyu Shi, Matteo Parsani, Pedro Costa

    In particle-laden turbulent wall flows, lift forces can influence the near-wall turbulence. This has been observed recently in particle-resolved simulations, which, however, are too expensive to be used in upscaled models. Instead, point-particle simulations have been the method of choice to simulate the dynamics of these flows during the last decades. While this approach is simpler, cheaper and physically sound for small inertial particles in turbulence, some issues remain. In the present work, we address challenges associated with lift force modelling in turbulent wall flows and the impact of lift forces in the near-wall flow. We performed direct numerical simulations of small inertial point particles in turbulent channel flow for fixed Stokes number and mass loading while varying the particle size. Our results show that the particle dynamics in the buffer region, causing the apparent particle-to-fluid slip velocity to vanish, raises major challenges for modelling lift forces accurately. While our results confirm that lift forces have little influence on particle dynamics for sufficiently small particle sizes, for inner-scaled diameters of order one and beyond, lift forces become quite important near the wall. The different particle dynamics under lift forces results in the modulation of streamwise momentum transport in the near-wall region. We analyse this lift-induced turbulence modulation for different lift force models, and the results indicate that realistic models are critical for particle-modelled simulations to correctly predict turbulence modulation by particles in the near-wall region.