Hendy Setiawan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Hendy Setiawan has a total of 87 co-authors. Here are the top co-authors by number of shared publications:
Kyoji Sassa
International Consortium on Landslides
8 shared publicationsKaoru Takara
Kyoto University
7 shared publicationsHiroshi Fukuoka
Niigata University
6 shared publications- Khang Dang
International Consortium on Landslides, Kyoto, Japan
6 shared publications - Kyoji Sassa
International Consortium on Landslides, Kyoto, Japan
5 shared publications Dwikorita Karnawati
Geological Engineering Department, Faculty of Engineering, Universitas Gadjah Mada, Sleman, Yogyakarta. 55281, Indonesia
3 shared publications
Latest Publications
- Open Access
- 1 July 2026
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1651 (1) , 012001
Integrating Surface Geological Mapping and Multi-Year Subsurface Data to Identify Lateral Lithological Variations Along the Jatinegara Diversion Tunnel, Central Java, Indonesia
Tunnel design in tropical regions requires careful attention to subsurface variability due to intense weathering and complex lithology. The ongoing design of the Jatinegara Diversion Tunnel, with a diameter of 6 meters and a length of 439 meters, relies solely on the 2024 borehole data without considering the recent 2017 data, revealing a contrast subsurface geological characteristic. This study investigates lateral lithological variations along the tunnel alignment by integrating surface geological mapping with multi-year borehole data from 2017 and 2024. The methodology includes geological mapping of a 2.0 × 2.0 km area, corebox analysis, surface-subsurface stratigraphic correlation, and rock mass quality evaluation using the Rock Mass Rating (RMR) system. Results show the tunnel traverses five zones with distinct rock mass characteristics. Zone 1, Zone 3, and Zone 5 consist of andesitic breccia with RMR values ranging from 20.21 – 39.57, indicating poor quality of rock mass. Zone 2 comprises interbedded carbonate sandstone and siltstone overlain by andesitic breccia, with RMR values ranging from 42.82 – 52.40 (fair). Zone 4 consists of interbedded carbonate sandstone and siltstone overlain by massive sandstone with siltstone intercalation with an RMR of 52.43 (fair). Given these rock mass conditions, the recommended excavation method is a top heading and bench approach with 1.0–1.5 meters advance in the top heading with support system consist of rock bolt, shotcrete, and steel set. These findings highlight the importance of integrating multi-year geotechnical data to support an adaptive and safe tunnel design in complex geological environments.
- 1 July 2026
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1651 (1) , 012001
Open AccessIntegrating Surface Geological Mapping and Multi-Year Subsurface Data to Identify Lateral Lithological Variations Along the Jatinegara Diversion Tunnel, Central Java, Indonesia
Tunnel design in tropical regions requires careful attention to subsurface variability due to intense weathering and complex lithology. The ongoing design of the Jatinegara Diversion Tunnel, with a diameter of 6 meters and a length of 439 meters, relies solely on the 2024 borehole data without considering the recent 2017 data, revealing a contrast subsurface geological characteristic. This study investigates lateral lithological variations along the tunnel alignment by integrating surface geological mapping with multi-year borehole data from 2017 and 2024. The methodology includes geological mapping of a 2.0 × 2.0 km area, corebox analysis, surface-subsurface stratigraphic correlation, and rock mass quality evaluation using the Rock Mass Rating (RMR) system. Results show the tunnel traverses five zones with distinct rock mass characteristics. Zone 1, Zone 3, and Zone 5 consist of andesitic breccia with RMR values ranging from 20.21 – 39.57, indicating poor quality of rock mass. Zone 2 comprises interbedded carbonate sandstone and siltstone overlain by andesitic breccia, with RMR values ranging from 42.82 – 52.40 (fair). Zone 4 consists of interbedded carbonate sandstone and siltstone overlain by massive sandstone with siltstone intercalation with an RMR of 52.43 (fair). Given these rock mass conditions, the recommended excavation method is a top heading and bench approach with 1.0–1.5 meters advance in the top heading with support system consist of rock bolt, shotcrete, and steel set. These findings highlight the importance of integrating multi-year geotechnical data to support an adaptive and safe tunnel design in complex geological environments.
- Open Access
- 1 June 2026
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1627 (1)
Slope Stability Analysis using the PHASE2 Software in the Wado Hydropower 50 MW Waterway Tunnel, Sumedang Regency of West Java Province in Indonesia
In planning, the tunnel slope must be in safe and stable conditions during the construction and operation phases. This research discusses the inlet and outlet slope stability analysis of the 50 MW Wado hydropower waterway tunnel in Sumedang Regency, West Java Province, Indonesia. The lithology in the study area obtained from the description of six core samples taken in 2019 along the tunnel is an andesite breccia I and andesite breccia II unit with weathering levels from slightly weathered, moderately weathered, and residual soil. Therefore, a reliable design for the tunnel slope geometry is needed to avoid landslides which can affect the economic impact in the construction phase and the operation of hydropower. The objective of this research was to assess the stability of slopes at the inlet and outlet of the Wado Hydropower 50 MW waterway tunnel using the finite element method (FEM), which analyzes the stability of slopes to earthquake loads. The results were used to determine the design of safe waterway tunnel inlet and outlet geometries. This study collected primary data to identify the characteristics of engineering geology in Sumedang Regency through geological mapping, core drilling evaluation, laboratory test, and slope stability analysis. The purpose of core drilling evaluation was to determine the Geological Strength Index (GSI) of rock masses for each layer. Laboratory tests were carried out to measure the rock-specific gravity, rock density, internal friction angle, Uniaxial Compressive Strength (UCS), and soil-specific gravity. Results from the PHASE2 software implied that the existing design of the inlet tunnel slope with an inclination of 0.5:1 obtained an SRF value of 0.53 and a total displacement value of 1.2 m. While the outlet tunnel slope with an inclination of 0.5:1, obtained an SRF value of 1.32 with a total displacement value of 1.06 m. These values indicate that inlet slopes are in an unsafe condition. After a review design and analysis of the inlet tunnel slope with an inclination of 1:1 and a bench of 6 meters, the SRF value increased to 1.37 with a total displacement value of 0.10 m. These values indicate that inlet and outlet tunnel slopes are in a safe condition based on standards specified in SNI 8460:2017.
- 1 June 2026
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1627 (1)
Open AccessSlope Stability Analysis using the PHASE2 Software in the Wado Hydropower 50 MW Waterway Tunnel, Sumedang Regency of West Java Province in Indonesia
In planning, the tunnel slope must be in safe and stable conditions during the construction and operation phases. This research discusses the inlet and outlet slope stability analysis of the 50 MW Wado hydropower waterway tunnel in Sumedang Regency, West Java Province, Indonesia. The lithology in the study area obtained from the description of six core samples taken in 2019 along the tunnel is an andesite breccia I and andesite breccia II unit with weathering levels from slightly weathered, moderately weathered, and residual soil. Therefore, a reliable design for the tunnel slope geometry is needed to avoid landslides which can affect the economic impact in the construction phase and the operation of hydropower. The objective of this research was to assess the stability of slopes at the inlet and outlet of the Wado Hydropower 50 MW waterway tunnel using the finite element method (FEM), which analyzes the stability of slopes to earthquake loads. The results were used to determine the design of safe waterway tunnel inlet and outlet geometries. This study collected primary data to identify the characteristics of engineering geology in Sumedang Regency through geological mapping, core drilling evaluation, laboratory test, and slope stability analysis. The purpose of core drilling evaluation was to determine the Geological Strength Index (GSI) of rock masses for each layer. Laboratory tests were carried out to measure the rock-specific gravity, rock density, internal friction angle, Uniaxial Compressive Strength (UCS), and soil-specific gravity. Results from the PHASE2 software implied that the existing design of the inlet tunnel slope with an inclination of 0.5:1 obtained an SRF value of 0.53 and a total displacement value of 1.2 m. While the outlet tunnel slope with an inclination of 0.5:1, obtained an SRF value of 1.32 with a total displacement value of 1.06 m. These values indicate that inlet slopes are in an unsafe condition. After a review design and analysis of the inlet tunnel slope with an inclination of 1:1 and a bench of 6 meters, the SRF value increased to 1.37 with a total displacement value of 0.10 m. These values indicate that inlet and outlet tunnel slopes are in a safe condition based on standards specified in SNI 8460:2017.
- Open Access
- 1 June 2026
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1634 (1)
Engineering Geological Characteristics of Welikis Dam, East Nusa Tenggara, Indonesia
A comprehensive understanding of engineering geological properties is fundamental to the planning of dam and tunnel constructions., leading to optimized outcomes in terms of safety, technical execution, and financial viability. This study investigates the engineering geology conditions at the proposed Welikis Dam site on the Mota Haliboen River, Belu Regency, East Nusa Tenggara Province of Indonesia. The methodology involved a literature review, field investigations, and comprehensive laboratory analysis, including core sample evaluation, petrography, rock property testing as strength tests and index properties tests. These datasets were integrated to characterize the surface and subsurface conditions, with rock mass classification based on lithology, weathering condition, and the Rock Mass Rating (RMR). Results indicate the geomorphology of the study area consists of an alluvial plain, and karst hills. The lithologies are dominated by limestone and mudstone with varying degrees of weathering (slight to high), which are predominantly classified as a ‘poor’ quality rock mass based on their RMR values. In addition, the unconsolidated boulder-sand sediment was also identified. These findings highlight significant geotechnical challenges for the dam and tunnel constructions, particularly the prevalence of a poor quality rock mass.
- 1 June 2026
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1634 (1)
Open AccessEngineering Geological Characteristics of Welikis Dam, East Nusa Tenggara, Indonesia
A comprehensive understanding of engineering geological properties is fundamental to the planning of dam and tunnel constructions., leading to optimized outcomes in terms of safety, technical execution, and financial viability. This study investigates the engineering geology conditions at the proposed Welikis Dam site on the Mota Haliboen River, Belu Regency, East Nusa Tenggara Province of Indonesia. The methodology involved a literature review, field investigations, and comprehensive laboratory analysis, including core sample evaluation, petrography, rock property testing as strength tests and index properties tests. These datasets were integrated to characterize the surface and subsurface conditions, with rock mass classification based on lithology, weathering condition, and the Rock Mass Rating (RMR). Results indicate the geomorphology of the study area consists of an alluvial plain, and karst hills. The lithologies are dominated by limestone and mudstone with varying degrees of weathering (slight to high), which are predominantly classified as a ‘poor’ quality rock mass based on their RMR values. In addition, the unconsolidated boulder-sand sediment was also identified. These findings highlight significant geotechnical challenges for the dam and tunnel constructions, particularly the prevalence of a poor quality rock mass.
- Open Access
- 1 June 2026
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1634 (1)
Stability Analysis of Diversion Tunnel B’s Inlet Portal at Walimpong Dam Using Limit Equilibrium Methods
The twin diversion tunnels designed by BBWS Pompengan Jeneberang represent a technically viable solution for managing the design discharge of the Walanae River in the Walimpong Dam project. These tunnels are planned to accommodate a peak flow rate of 678 m³/s, corresponding to a 25-year return period. Although preliminary geological investigations have been conducted, the stability of the inlet portal slope of Diversion Tunnel B has not yet been evaluated. This slope may be susceptible to failure due to excavation activities or seismic loading, potentially causing construction delays. This study assesses the stability of the inlet portal slope using the Limit Equilibrium Method (LEM), specifically the Bishop Simplified and Morgenstern–Price methods, under both static and pseudostatic conditions. The analysis incorporates data from surface geological mapping, drilling core assessment, rock mass classification, and laboratory testing. The Geological Strength Index (GSI) was used to characterize rock mass quality, showing poor-quality packstone (GSI 35), fair-quality mudstone (GSI 50), and poor-quality mudstone (GSI 38-39). The results indicate that the computed Factors of Safety satisfy the minimum requirements of SNI 8460:2017, with values of 1.68-1.70 (static) and 1.49-1.53 (pseudostatic), confirming that the inlet portal slope is stable and suitable for supporting diversion tunnel construction.
- 1 June 2026
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1634 (1)
Open AccessStability Analysis of Diversion Tunnel B’s Inlet Portal at Walimpong Dam Using Limit Equilibrium Methods
The twin diversion tunnels designed by BBWS Pompengan Jeneberang represent a technically viable solution for managing the design discharge of the Walanae River in the Walimpong Dam project. These tunnels are planned to accommodate a peak flow rate of 678 m³/s, corresponding to a 25-year return period. Although preliminary geological investigations have been conducted, the stability of the inlet portal slope of Diversion Tunnel B has not yet been evaluated. This slope may be susceptible to failure due to excavation activities or seismic loading, potentially causing construction delays. This study assesses the stability of the inlet portal slope using the Limit Equilibrium Method (LEM), specifically the Bishop Simplified and Morgenstern–Price methods, under both static and pseudostatic conditions. The analysis incorporates data from surface geological mapping, drilling core assessment, rock mass classification, and laboratory testing. The Geological Strength Index (GSI) was used to characterize rock mass quality, showing poor-quality packstone (GSI 35), fair-quality mudstone (GSI 50), and poor-quality mudstone (GSI 38-39). The results indicate that the computed Factors of Safety satisfy the minimum requirements of SNI 8460:2017, with values of 1.68-1.70 (static) and 1.49-1.53 (pseudostatic), confirming that the inlet portal slope is stable and suitable for supporting diversion tunnel construction.
- Open Access
- 1 April 2026
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1607 (1)
Engineering Geological Evaluation of Inlet Portal Slope Stability in the Welikis Dam Diversion Tunnel Using the Limit Equilibrium Method
This study builds on the prior engineering-geological characterization of the Welikis Dam with a focus on the stability performance of the diversion-tunnel inlet slope. The diversion tunnel, designed to reroute the Mota Haliboen River during dam construction, features a horseshoe profile with a 5 m diameter and a length of 500 m. Subsurface conditions at the portal—dominated by poor-quality calcarenite and calcilutite—were defined from core logs and laboratory testing; rock-mass quality was classified using Geological Strength Index (GSI), Uniaxial Compressive Strength (UCS) and unit weight were obtained from lab results. The slope geometry is 40 m high (510–470 meters above sea level) with slope angle of 53° and groundwater at 9–15 m depth. A dewatering scenario was included in the slope to reduce hydrostatic pressure by lowering groundwater level by 5–7 m. Limit Equilibrium Methods (LEM) of Morgenstern–Price and Spencer were implemented using Slide2 under static and pseudostatic loading. Seismic inputs adopted Peak Ground Acceleration (PGA) = 0.293 g, site class (SC), amplification factor (Fa)= 1.1, yielding a horizontal seismic coefficient (k h )= 0.161, consistent with SNI 8460:2017. Results indicate that the inlet portal meets the stability criteria, with Factor of Safety (FoS) 1.493 in static and 1.161 in pseudostatic conditions for Morgenstern–Price method, and FoS 1.499 in static and 1.155 in pseudostatic conditions for Spencer method, respectively. Although compliant, the inherent limitations of LEM (absence of stress–strain physics) suggest complementary FEM analyses during construction for verification.
- 1 April 2026
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1607 (1)
Open AccessEngineering Geological Evaluation of Inlet Portal Slope Stability in the Welikis Dam Diversion Tunnel Using the Limit Equilibrium Method
This study builds on the prior engineering-geological characterization of the Welikis Dam with a focus on the stability performance of the diversion-tunnel inlet slope. The diversion tunnel, designed to reroute the Mota Haliboen River during dam construction, features a horseshoe profile with a 5 m diameter and a length of 500 m. Subsurface conditions at the portal—dominated by poor-quality calcarenite and calcilutite—were defined from core logs and laboratory testing; rock-mass quality was classified using Geological Strength Index (GSI), Uniaxial Compressive Strength (UCS) and unit weight were obtained from lab results. The slope geometry is 40 m high (510–470 meters above sea level) with slope angle of 53° and groundwater at 9–15 m depth. A dewatering scenario was included in the slope to reduce hydrostatic pressure by lowering groundwater level by 5–7 m. Limit Equilibrium Methods (LEM) of Morgenstern–Price and Spencer were implemented using Slide2 under static and pseudostatic loading. Seismic inputs adopted Peak Ground Acceleration (PGA) = 0.293 g, site class (SC), amplification factor (Fa)= 1.1, yielding a horizontal seismic coefficient (k h )= 0.161, consistent with SNI 8460:2017. Results indicate that the inlet portal meets the stability criteria, with Factor of Safety (FoS) 1.493 in static and 1.161 in pseudostatic conditions for Morgenstern–Price method, and FoS 1.499 in static and 1.155 in pseudostatic conditions for Spencer method, respectively. Although compliant, the inherent limitations of LEM (absence of stress–strain physics) suggest complementary FEM analyses during construction for verification.
- Open Access
- 1 February 2026
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1586 (1)
Engineering geological characteristics and RMR classification of diversion Tunnel B at Walimpong Dam, South Sulawesi of Indonesia
The Walimpong Dam was designed with twin tunnels to divert the flow of the Walanae River during dam construction. Previous geological investigation revealed that tunnel B passed through weak sedimentary rock with the water table lying above the tunnel. Hence, it is important to identify the engineering geological characteristics of Tunnel B—including geomorphology, lithology, geological structures, and groundwater—as well as to recommend the excavation method and preliminary support, based on the Rock Mass Rating (RMR). This study involved surface mapping, borehole core analysis, field investigations, and laboratory testing. Geomorphological observations indicate that the tunnel site is located within landform units ranging from sloping hills to steep sloping hills. Geological surface mapping and borehole observation imply that the area surrounding the tunnel consists of two lithologies: packstone and mudstone. Geological structures such as bedding planes and joints were identified at the southwest and the northwest of the tunnel location. Analysis of four boreholes confirms that Tunnel B will pass entirely through highly weathered mudstone. Based on the RMR classification, the rock mass quality along the alignment of Tunnel B—at the inlet, middle, and outlet—is consistently categorized as poor, with RMR values range between 35 and 39. Based on these results, top heading and bench excavation are recommended, supported by steel sets, rock bolts, and shotcrete. These findings provide essential input for tunnel design and support hazard mitigation analysis during excavation and construction.
- 1 February 2026
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1586 (1)
Open AccessEngineering geological characteristics and RMR classification of diversion Tunnel B at Walimpong Dam, South Sulawesi of Indonesia
The Walimpong Dam was designed with twin tunnels to divert the flow of the Walanae River during dam construction. Previous geological investigation revealed that tunnel B passed through weak sedimentary rock with the water table lying above the tunnel. Hence, it is important to identify the engineering geological characteristics of Tunnel B—including geomorphology, lithology, geological structures, and groundwater—as well as to recommend the excavation method and preliminary support, based on the Rock Mass Rating (RMR). This study involved surface mapping, borehole core analysis, field investigations, and laboratory testing. Geomorphological observations indicate that the tunnel site is located within landform units ranging from sloping hills to steep sloping hills. Geological surface mapping and borehole observation imply that the area surrounding the tunnel consists of two lithologies: packstone and mudstone. Geological structures such as bedding planes and joints were identified at the southwest and the northwest of the tunnel location. Analysis of four boreholes confirms that Tunnel B will pass entirely through highly weathered mudstone. Based on the RMR classification, the rock mass quality along the alignment of Tunnel B—at the inlet, middle, and outlet—is consistently categorized as poor, with RMR values range between 35 and 39. Based on these results, top heading and bench excavation are recommended, supported by steel sets, rock bolts, and shotcrete. These findings provide essential input for tunnel design and support hazard mitigation analysis during excavation and construction.
- Open Access
- 26 December 2025
- Published by Springer Nature in Research Square
Empirical and Numerical Analyses of Tunnel Support Design in Weak Volcanic Rock Masses: A Case Study of the Jatinegara Diversion Tunnel, Central Java Province, Indonesia
This study presents an integrated geotechnical framework combining empirical and numerical analyses to design tunnel support systems for the planned diversion tunnel at Jatinegara dam in weak and heterogeneous volcanic rock masses. Field investigation, borehole analysis, and laboratory testing were used to characterize the rock mass using three empirical classifications: rock mass rating (RMR), Q-system (Q), and geological strength index (GSI). The empirical approach provided preliminary support requirements as the baseline and input parameters for the two-dimensional finite element method (FEM) using commercial software for tunnel stability analysis. The tunnel alignment is delineated into five distinct geotechnical zones according to empirical classifications, with rock mass conditions ranging from "Poor" to "Fair" quality. Furthermore, two-dimensional finite element modeling (FEM) was performed to evaluate tunnel stability under static and pseudo-static seismic loads and compare empirically derived supports with optimized support systems. Result implied that poor zone (zone 1, zone 3, and zone 5) requires systematic rock bolts (3 m length, spacing 1.2 m), 50 cm shotcrete with wire mesh and steel sets with 1.5 m spacing, while fair zone (zone 2 and zone 4) can be supported with systematic rock bolts (2-2.4 m length, spacing 2.1–2.3 m), 50–60 mm shotcrete with wire mesh. Using those support combinations, a strength factor of greater than 1 and a displacement of less than 10 cm produces a reliable and safe design.
- 26 December 2025
- Published by Springer Nature in Research Square
Open AccessEmpirical and Numerical Analyses of Tunnel Support Design in Weak Volcanic Rock Masses: A Case Study of the Jatinegara Diversion Tunnel, Central Java Province, Indonesia
This study presents an integrated geotechnical framework combining empirical and numerical analyses to design tunnel support systems for the planned diversion tunnel at Jatinegara dam in weak and heterogeneous volcanic rock masses. Field investigation, borehole analysis, and laboratory testing were used to characterize the rock mass using three empirical classifications: rock mass rating (RMR), Q-system (Q), and geological strength index (GSI). The empirical approach provided preliminary support requirements as the baseline and input parameters for the two-dimensional finite element method (FEM) using commercial software for tunnel stability analysis. The tunnel alignment is delineated into five distinct geotechnical zones according to empirical classifications, with rock mass conditions ranging from "Poor" to "Fair" quality. Furthermore, two-dimensional finite element modeling (FEM) was performed to evaluate tunnel stability under static and pseudo-static seismic loads and compare empirically derived supports with optimized support systems. Result implied that poor zone (zone 1, zone 3, and zone 5) requires systematic rock bolts (3 m length, spacing 1.2 m), 50 cm shotcrete with wire mesh and steel sets with 1.5 m spacing, while fair zone (zone 2 and zone 4) can be supported with systematic rock bolts (2-2.4 m length, spacing 2.1–2.3 m), 50–60 mm shotcrete with wire mesh. Using those support combinations, a strength factor of greater than 1 and a displacement of less than 10 cm produces a reliable and safe design.
- 17 November 2025
- Published by Springer Nature
- p. 296-308
Study on Limitation of One-Dimensional Ground-Based Monitoring in Open Pit Mine Lowwall Slope Stability
- 17 November 2025
- Published by Springer Nature
- p. 296-308
Study on Limitation of One-Dimensional Ground-Based Monitoring in Open Pit Mine Lowwall Slope Stability
- 17 November 2025
- Published by Springer Nature
- p. 445-453
Effect of Water Table Position on the Stability of Tunnel (A Case Study at Diversion Tunnel of Riam Kiwa Dam)
- 17 November 2025
- Published by Springer Nature
- p. 445-453
Effect of Water Table Position on the Stability of Tunnel (A Case Study at Diversion Tunnel of Riam Kiwa Dam)
- Open Access
- 1 October 2025
- Published by Springer Nature
- p. 301-316
Slope Stability Analysis Using the Slope Mass Rating (SMR) Method on Provincial Road Section, Kebumen Regency, Central Java Province, Indonesia
Road construction in mountainous areas has various challenges in the construction and maintenance stages. One of the hazards that is often found is landslides. Therefore, to ensure safety for users, it is necessary to study slope stability along the road. The research aims to evaluate the slope stability condition of the road section based on the slope mass rating (SMR) method. This research was conducted on a provincial road in Central Java, Indonesia. The SMR value is based on the rock mass quality values according to the rock mass rating (RMR) method and the weighting of adjustment factor values consisting of slope orientation, discontinuity orientation, and excavation method. The RMR values consist of uniaxial compressive strength (UCS), rock quality designation (RQD), discontinuity spacing, discontinuity condition, and groundwater condition. The results of rock mass quality according to the RMR method are divided into good (61–80), fair (41–60), and poor (21–40) qualities. In addition, slope stability analysis using the SMR method shows that the slope stability conditions on the road section are divided into stable (61–80), partially stable (41–60), and unstable (21–40) conditions. This paper describes the achievements and the current activities of the IPL-WCoE on Risk Management and Technological Innovation for Landslide Mitigation.
- 1 October 2025
- Published by Springer Nature
- p. 301-316
Open AccessSlope Stability Analysis Using the Slope Mass Rating (SMR) Method on Provincial Road Section, Kebumen Regency, Central Java Province, Indonesia
Road construction in mountainous areas has various challenges in the construction and maintenance stages. One of the hazards that is often found is landslides. Therefore, to ensure safety for users, it is necessary to study slope stability along the road. The research aims to evaluate the slope stability condition of the road section based on the slope mass rating (SMR) method. This research was conducted on a provincial road in Central Java, Indonesia. The SMR value is based on the rock mass quality values according to the rock mass rating (RMR) method and the weighting of adjustment factor values consisting of slope orientation, discontinuity orientation, and excavation method. The RMR values consist of uniaxial compressive strength (UCS), rock quality designation (RQD), discontinuity spacing, discontinuity condition, and groundwater condition. The results of rock mass quality according to the RMR method are divided into good (61–80), fair (41–60), and poor (21–40) qualities. In addition, slope stability analysis using the SMR method shows that the slope stability conditions on the road section are divided into stable (61–80), partially stable (41–60), and unstable (21–40) conditions. This paper describes the achievements and the current activities of the IPL-WCoE on Risk Management and Technological Innovation for Landslide Mitigation.