Anneng Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Anneng Yang has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Feng Yan
Soochow University
5 shared publications Jiajun Song
Department of Applied Physics The Hong Kong Polytechnic University Kowloon Hong Kong P. R. China
3 shared publications- Naixiang Wang
Department of Applied Physics, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong
3 shared publications Ge Ren
Faculty of Science Kunming University of Science and Technology Kunming China
2 shared publications- Guangmei Hu
Faculty of Science Kunming University of Science and Technology Kunming China
2 shared publications - Haifeng Ling
State Key Laboratory of Flexible Electronics (LoFE) Jiangsu Key Laboratory of Neuromorphic Electronics (LoNE) & Institute of Advanced Materials (IAM) Nanjing University of Posts and Telecommunications Nanjing China
2 shared publications
Latest Publications
- Open Access
- 5 October 2026
- Published by Wiley in Advanced Materials Technologies
- p. e71372
Recent Progress in Skin Bioelectronics for Electrophysiological Monitoring
The acquisition of high‐quality electrophysiological signals can provide comprehensive information in disease diagnosis, athletic training, human‐computer interaction, and human healthcare, which plays an important role in improving the quality of life, boosting the development of wearable bioelectronics. This review addresses recent progress in skin bioelectronics for electrophysiological signal monitoring and its applications. First, the crucial properties of functional electronic materials used for bioelectrode fabrication during the signal acquisition are addressed. Then the bioelectrode/device and its fabrication techniques are discussed in terms of the material characteristics. Subsequently, the important components of the epidermal bioelectronics system, including the multichannel bioelectrode array, stable electrical interfaces, and miniaturized signal processing platform, are described respectively, which are further integrated to form a wearable electronic device for high‐fidelity electrophysiological signal monitoring. Next, the applications of fully integrated skin bioelectronics are summarized. With the help of advanced artificial intelligence, intelligent sensing devices are further developed, achieving new breakthroughs in the medical field and intelligent machine control. Finally, the conclusion, challenges and future opportunities of on‐skin bioelectronics for epidermal electrophysiology are discussed.
- 5 October 2026
- Published by Wiley in Advanced Materials Technologies
- p. e71372
Open AccessRecent Progress in Skin Bioelectronics for Electrophysiological Monitoring
The acquisition of high‐quality electrophysiological signals can provide comprehensive information in disease diagnosis, athletic training, human‐computer interaction, and human healthcare, which plays an important role in improving the quality of life, boosting the development of wearable bioelectronics. This review addresses recent progress in skin bioelectronics for electrophysiological signal monitoring and its applications. First, the crucial properties of functional electronic materials used for bioelectrode fabrication during the signal acquisition are addressed. Then the bioelectrode/device and its fabrication techniques are discussed in terms of the material characteristics. Subsequently, the important components of the epidermal bioelectronics system, including the multichannel bioelectrode array, stable electrical interfaces, and miniaturized signal processing platform, are described respectively, which are further integrated to form a wearable electronic device for high‐fidelity electrophysiological signal monitoring. Next, the applications of fully integrated skin bioelectronics are summarized. With the help of advanced artificial intelligence, intelligent sensing devices are further developed, achieving new breakthroughs in the medical field and intelligent machine control. Finally, the conclusion, challenges and future opportunities of on‐skin bioelectronics for epidermal electrophysiology are discussed.
- 30 September 2026
- Published by Wiley in Advanced Engineering Materials
- Vol. 28 (22)
Oxidized Liquid Metal‐Based Stretchable Patch for Wearable Health Monitoring
Traditional electronic devices are significantly constrained by their intrinsic rigidity, which restricts their application in stretchable and wearable electronics. To address these challenges, this study presents a cost‐effective and accessible approach to fabricate stretchable electronic circuits using liquid metal (EGaIn) and stencil printing technique with a laser‐engraved mask. The liquid metal ink, synthesized through overoxidation process, exhibits high conductivity, printability, and exceptional strain insensitivity ( R / R 0 < 2.5 under 400% strain), enabling high‐resolution patterning with a minimum feature size of 50 μm. The liquid metal‐based circuits demonstrate stable electrical performance under significant deformations and reliable integration with commercial rigid electronic components. By leveraging this method, we successfully transformed a commercial photoplethysmography (PPG) sensor into a stretchable device and integrated it with an electrocardiogram (ECG) sensor to construct a wearable cardiovascular monitoring system. The results showed the system can obtain a comparable ECG, PPG signals, and systolic blood pressure with those obtained from a commercial instrument, which was further used for continual HR, SpO2, and blood pressure monitoring with excellent stability. This work provides a transformative platform for the low‐cost and simple manufacturing of stretchable electronic devices, with broad potential applications in wearable health monitoring.
- 30 September 2026
- Published by Wiley in Advanced Engineering Materials
- Vol. 28 (22)
Oxidized Liquid Metal‐Based Stretchable Patch for Wearable Health Monitoring
Traditional electronic devices are significantly constrained by their intrinsic rigidity, which restricts their application in stretchable and wearable electronics. To address these challenges, this study presents a cost‐effective and accessible approach to fabricate stretchable electronic circuits using liquid metal (EGaIn) and stencil printing technique with a laser‐engraved mask. The liquid metal ink, synthesized through overoxidation process, exhibits high conductivity, printability, and exceptional strain insensitivity ( R / R 0 < 2.5 under 400% strain), enabling high‐resolution patterning with a minimum feature size of 50 μm. The liquid metal‐based circuits demonstrate stable electrical performance under significant deformations and reliable integration with commercial rigid electronic components. By leveraging this method, we successfully transformed a commercial photoplethysmography (PPG) sensor into a stretchable device and integrated it with an electrocardiogram (ECG) sensor to construct a wearable cardiovascular monitoring system. The results showed the system can obtain a comparable ECG, PPG signals, and systolic blood pressure with those obtained from a commercial instrument, which was further used for continual HR, SpO2, and blood pressure monitoring with excellent stability. This work provides a transformative platform for the low‐cost and simple manufacturing of stretchable electronic devices, with broad potential applications in wearable health monitoring.
- Open Access
- 25 June 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (43) , e73802
Intimate Interaction Between Nucleic Acid and Conjugated Polymers in Organic Electrochemical Transistors Enables Ultrasensitive Biomarker Detection
Ultrasensitive biosensors are crucial for pandemic prevention and healthcare monitoring. The interactions between biomolecules and functional materials, such as metals and semiconductors, have led to the development of highly sensitive biosensors. Organic semiconductors, known for their unique mixed ion and electronic conduction properties in aqueous solutions, show promise in these applications. However, the interactions between organic semiconductors and biomolecules remain poorly understood. In this study, we investigate the interaction between nucleic acid and a conjugate polymer by analyzing the performance of organic electrochemical transistors (OECTs). For the first time, we demonstrate that negatively charged ribonucleic acid (RNA) can interact with the conjugate polymer, leading to a decrease in the volumetric capacitance of the polymer channel in aqueous solutions. Based on this effect, OECTs are employed to detect various RNA biomarkers with high sensitivity, achieving multiplexed and selective detections of multiple RNA biomarkers at a low detection limit down to 10 −17 M. This portable biosensing platform can facilitate rapid, low‐cost and point‐of‐care diagnostics for various diseases.
- 25 June 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (43) , e73802
Open AccessIntimate Interaction Between Nucleic Acid and Conjugated Polymers in Organic Electrochemical Transistors Enables Ultrasensitive Biomarker Detection
Ultrasensitive biosensors are crucial for pandemic prevention and healthcare monitoring. The interactions between biomolecules and functional materials, such as metals and semiconductors, have led to the development of highly sensitive biosensors. Organic semiconductors, known for their unique mixed ion and electronic conduction properties in aqueous solutions, show promise in these applications. However, the interactions between organic semiconductors and biomolecules remain poorly understood. In this study, we investigate the interaction between nucleic acid and a conjugate polymer by analyzing the performance of organic electrochemical transistors (OECTs). For the first time, we demonstrate that negatively charged ribonucleic acid (RNA) can interact with the conjugate polymer, leading to a decrease in the volumetric capacitance of the polymer channel in aqueous solutions. Based on this effect, OECTs are employed to detect various RNA biomarkers with high sensitivity, achieving multiplexed and selective detections of multiple RNA biomarkers at a low detection limit down to 10 −17 M. This portable biosensing platform can facilitate rapid, low‐cost and point‐of‐care diagnostics for various diseases.
- 17 April 2025
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 7 (9) , 5407-5417
Stretchable and Self-Adhesive PEDOT:PSS Electrode for Fully Integrated and Long-Term Electrocardiogram Monitoring
- 17 April 2025
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 7 (9) , 5407-5417
Stretchable and Self-Adhesive PEDOT:PSS Electrode for Fully Integrated and Long-Term Electrocardiogram Monitoring
- Open Access
- 2 February 2023
- Published by Wiley in Advanced Functional Materials
- Vol. 33 (17)
Wearable Organic Electrochemical Transistor Array for Skin‐Surface Electrocardiogram Mapping Above a Human Heart
Electrocardiogram (ECG) mapping can provide vital information in sports training and cardiac disease diagnosis. However, most electronic devices for monitoring ECG signals need to use multiple long wires, which limit their wearability and conformability in practical applications, while wearable ECG mapping based on integrated sensor arrays has been rarely reported. Herein, ultra‐flexible organic electrochemical transistor (OECT) arrays used for wearable ECG mapping on the skin surface above a human heart are presented. QRS complexes of ECG signals at different recording distances and directions relative to the heart are obtained. Furthermore, the ECG signals are successfully analyzed by the devices before and after exercise, indicating potential applications in some sports training and fitness scenarios. The OECT arrays that can conveniently monitor spacial ECG signals in the heart region may find niche applications in wearable electronics and healthcare products in the future.
- 2 February 2023
- Published by Wiley in Advanced Functional Materials
- Vol. 33 (17)
Open AccessWearable Organic Electrochemical Transistor Array for Skin‐Surface Electrocardiogram Mapping Above a Human Heart
Electrocardiogram (ECG) mapping can provide vital information in sports training and cardiac disease diagnosis. However, most electronic devices for monitoring ECG signals need to use multiple long wires, which limit their wearability and conformability in practical applications, while wearable ECG mapping based on integrated sensor arrays has been rarely reported. Herein, ultra‐flexible organic electrochemical transistor (OECT) arrays used for wearable ECG mapping on the skin surface above a human heart are presented. QRS complexes of ECG signals at different recording distances and directions relative to the heart are obtained. Furthermore, the ECG signals are successfully analyzed by the devices before and after exercise, indicating potential applications in some sports training and fitness scenarios. The OECT arrays that can conveniently monitor spacial ECG signals in the heart region may find niche applications in wearable electronics and healthcare products in the future.
- Top Cited PapersOpen Access
- 17 September 2021
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 7 (38)
Ultrafast, sensitive, and portable detection of COVID-19 IgG using flexible organic electrochemical transistors
A portable test device can specifically detect ultralow concentrations of SARS-CoV-2 IgG within several minutes.
- 17 September 2021
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 7 (38)
Top Cited PapersOpen AccessUltrafast, sensitive, and portable detection of COVID-19 IgG using flexible organic electrochemical transistors
A portable test device can specifically detect ultralow concentrations of SARS-CoV-2 IgG within several minutes.
- 8 August 2019
- Published by Wiley in Advanced Electronic Materials
- Vol. 5 (10) , 1900566
Biomimicking Stretchable Organic Electrochemical Transistor
Stretchable organic electrochemical transistors (OECTs) can find applications in wearable electronics for biosensing. However, the existing fabrication methods are either inconvenient or expensive. Here, a novel method to fabricate stretchable OECTs based on biomimicking polydimethylsiloxane substrates is reported. The substrate pattern is transferred from the bract of Bougainvillea glabra, demonstrating a 2D wavy structure. To further enhance the stretchability of the Au electrodes of the devices on the wavy surface, a highly conductive polymer film is coated on the Au surface by inkjet printing to bridge disconnected parts separated by cracks. The obtained OECTs demonstrate omnidirectional stretchability up to 30% and a bending radius down to 15 mm with stable performance. Stretchable glucose sensors with a detection limit around 1 µm are developed based on the biomimicking stretchable OECTs, which are sensitive enough for detecting glucose levels in body fluids.
- 8 August 2019
- Published by Wiley in Advanced Electronic Materials
- Vol. 5 (10) , 1900566
Biomimicking Stretchable Organic Electrochemical Transistor
Stretchable organic electrochemical transistors (OECTs) can find applications in wearable electronics for biosensing. However, the existing fabrication methods are either inconvenient or expensive. Here, a novel method to fabricate stretchable OECTs based on biomimicking polydimethylsiloxane substrates is reported. The substrate pattern is transferred from the bract of Bougainvillea glabra, demonstrating a 2D wavy structure. To further enhance the stretchability of the Au electrodes of the devices on the wavy surface, a highly conductive polymer film is coated on the Au surface by inkjet printing to bridge disconnected parts separated by cracks. The obtained OECTs demonstrate omnidirectional stretchability up to 30% and a bending radius down to 15 mm with stable performance. Stretchable glucose sensors with a detection limit around 1 µm are developed based on the biomimicking stretchable OECTs, which are sensitive enough for detecting glucose levels in body fluids.
- 4 August 2019
- Published by Wiley in Advanced Materials Technologies
- Vol. 4 (9) , 1900471
Dynamically Reconfigurable Short‐Term Synapse with Millivolt Stimulus Resolution Based on Organic Electrochemical Transistors
Electrolyte‐gated organic electrochemical transistors (OECTs) are attractive for synaptic electronics owing to the ionic–electronic coupling, huge specific capacitance, physiological environmental compatibility, and architectural flexibility. Here, an identical spike‐polarity method is reported to realize the concomitance of excitatory and inhibitory short‐term plasticities in unipolar poly(3,4‐ethylenedioxythiophene)–poly(styrenesulphonate) (PEDOT:PSS) OECTs. Dynamical reconfiguration between the excitatory and inhibitory responses with multilevel and well‐balanced synaptic strength is realized, without performing operations or introducing additional modulation terminals. Owing to the distinctive volumetric capacitance of OECTs, the PEDOT:PSS synapse affords remarkable characteristics such as an ultrahigh stimulus‐resolution capability of 10 mV and an ultralow power consumption of ≈2 pJ per spike. Moreover, spatiotemporal‐correlated logics is realized. This work demonstrates on‐demand manipulation of ionic dynamics for building synaptic elements with sophisticated functionalities at a single‐device level.
- 4 August 2019
- Published by Wiley in Advanced Materials Technologies
- Vol. 4 (9) , 1900471
Dynamically Reconfigurable Short‐Term Synapse with Millivolt Stimulus Resolution Based on Organic Electrochemical Transistors
Electrolyte‐gated organic electrochemical transistors (OECTs) are attractive for synaptic electronics owing to the ionic–electronic coupling, huge specific capacitance, physiological environmental compatibility, and architectural flexibility. Here, an identical spike‐polarity method is reported to realize the concomitance of excitatory and inhibitory short‐term plasticities in unipolar poly(3,4‐ethylenedioxythiophene)–poly(styrenesulphonate) (PEDOT:PSS) OECTs. Dynamical reconfiguration between the excitatory and inhibitory responses with multilevel and well‐balanced synaptic strength is realized, without performing operations or introducing additional modulation terminals. Owing to the distinctive volumetric capacitance of OECTs, the PEDOT:PSS synapse affords remarkable characteristics such as an ultrahigh stimulus‐resolution capability of 10 mV and an ultralow power consumption of ≈2 pJ per spike. Moreover, spatiotemporal‐correlated logics is realized. This work demonstrates on‐demand manipulation of ionic dynamics for building synaptic elements with sophisticated functionalities at a single‐device level.