Xiaolei Shi
Research Subjects
Xiaolei Shi has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
Jinyang Li
College of Automotive Engineering, Xi’an Aeronautical Polytechnic Institute, Xi’an, China
12 shared publicationsHaoqiang Zuo
Shaanxi University of Science and Technology
11 shared publicationsYun Liu
8 shared publications- Fang Xu
State Key Laboratory of Environment-Friendly Energy Materials, Southwest University of Science and Technology, Mianyang, China
5 shared publications Kun Zhang
5 shared publicationsMinzhu Zhao
Shaanxi University of Science and Technology
5 shared publications
Latest Publications
- 7 September 2026
- Published by Elsevier in Ceramics International
- Vol. 52 (27) , 54221-54229
2 wt% V2O5-enhanced microwave dielectric properties of Ba3Ti4Nb4O21 ceramics for miniaturized cylindrical dielectric resonant antenna application
- 7 September 2026
- Published by Elsevier in Ceramics International
- Vol. 52 (27) , 54221-54229
2 wt% V2O5-enhanced microwave dielectric properties of Ba3Ti4Nb4O21 ceramics for miniaturized cylindrical dielectric resonant antenna application
- 7 September 2026
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 37 (25) , 1972
Low-temperature-fired Li2Mg2.92Sn0.96O6–Ba3(VO4)2 microwave dielectric ceramics with enhanced temperature stability
- 7 September 2026
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 37 (25) , 1972
Low-temperature-fired Li2Mg2.92Sn0.96O6–Ba3(VO4)2 microwave dielectric ceramics with enhanced temperature stability
- 20 June 2026
- Published by Springer Nature in Ionics
- Vol. 32 (8) , 8685-8693
The effects of LiF addition on the structure, microstructure evolution and dielectric characteristics of Li2Mg2.92Sn0.96O6 ceramics
- 20 June 2026
- Published by Springer Nature in Ionics
- Vol. 32 (8) , 8685-8693
The effects of LiF addition on the structure, microstructure evolution and dielectric characteristics of Li2Mg2.92Sn0.96O6 ceramics
- Open Access
- 19 June 2026
- Published by World Scientific Pub Co Pte Ltd in Journal of Advanced Dielectrics
- Vol. 16 (04)
Improved density and low-temperature sintering of Li 2 Mg 3 TiO 6 microwave dielectric ceramics with LiF sintering aid
In order to eliminate the porous structure caused by lithium volatilization and explore the sintering mechanism and structure dependence of dielectric characteristics, lithium fluoride (LiF) as a sintering aid was adopted to prepare Li 2 Mg 3 TiO 6−x LiF ([ ]–5 wt.%) samples. The effects of LiF additive on phase components, morphology, sintering characteristics and dielectric characteristics of Li 2 Mg 3 TiO 6 were studied. The results showed that modest LiF addition can reduce sintering temperature from 1280 ∘ C to 900 ∘ C. The structure and refinement analysis demonstrated that samples maintain a single structure within 0 wt.%[ ]4 wt.%. The morphology analysis confirmed that the porosity and grain size of Li 2 Mg 3 TiO 6−x LiF ceramics gradually decreased with increasing LiF. The dielectric constant ([ ] and quality factor ([ ]) showed a trend of increasing first and then decreasing, which was strongly associated with density, ionic polarization, phase components, lattice energy, packing fraction and grain size. In addition, the Li 2 Mg 3 TiO 6−4 wt.% LiF sample sintered at 900 ∘ C exhibited outstanding dielectric characteristics: [ ], [ ] [ ]GHz and [ ] [ ]ppm/ ∘ C.
- 19 June 2026
- Published by World Scientific Pub Co Pte Ltd in Journal of Advanced Dielectrics
- Vol. 16 (04)
Open AccessImproved density and low-temperature sintering of Li 2 Mg 3 TiO 6 microwave dielectric ceramics with LiF sintering aid
In order to eliminate the porous structure caused by lithium volatilization and explore the sintering mechanism and structure dependence of dielectric characteristics, lithium fluoride (LiF) as a sintering aid was adopted to prepare Li 2 Mg 3 TiO 6−x LiF ([ ]–5 wt.%) samples. The effects of LiF additive on phase components, morphology, sintering characteristics and dielectric characteristics of Li 2 Mg 3 TiO 6 were studied. The results showed that modest LiF addition can reduce sintering temperature from 1280 ∘ C to 900 ∘ C. The structure and refinement analysis demonstrated that samples maintain a single structure within 0 wt.%[ ]4 wt.%. The morphology analysis confirmed that the porosity and grain size of Li 2 Mg 3 TiO 6−x LiF ceramics gradually decreased with increasing LiF. The dielectric constant ([ ] and quality factor ([ ]) showed a trend of increasing first and then decreasing, which was strongly associated with density, ionic polarization, phase components, lattice energy, packing fraction and grain size. In addition, the Li 2 Mg 3 TiO 6−4 wt.% LiF sample sintered at 900 ∘ C exhibited outstanding dielectric characteristics: [ ], [ ] [ ]GHz and [ ] [ ]ppm/ ∘ C.
- 8 May 2026
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 37 (13) , 1011
Improved density and dielectric characteristics of Li2Mg3ZrO6-based ceramics by zirconium deficiency and LiF addition
- 8 May 2026
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 37 (13) , 1011
Improved density and dielectric characteristics of Li2Mg3ZrO6-based ceramics by zirconium deficiency and LiF addition
- 24 April 2021
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 104 (9) , 4614-4623
Mechanism study of the Mn‐substituted magnesium borate: Decreased sintering temperature and improved dielectric property
The influence of manganese substitution on the sintering and dielectric properties of Mg3B2O6 (MBO) was studied, and the detailed mechanism of variation was discussed using density functional theory calculations. The characterization method involved a network analyser, differential–thermal analyses, thermomechanical analyses, X‐ray diffraction, and scanning electron microscopy. Manganese substitution formed a two‐phase system (MBO and Mg2B2O5), improved the dielectric property, densified the microstructure, lowered the activation energy, decreased the crystallite size, modified the band structure property, and strengthened the covalency of MgO6 octahedron. The 7% mole substitution of manganese to magnesium improved the dielectric properties of MBO to 7.06 for εr and 61 100 GHz at 15 GHz for Q × f, −54.8 ppm/°C for τf. The intrinsic densification temperature decreased from 1350 to 1175°C with 97.7% relative density.
- 24 April 2021
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 104 (9) , 4614-4623
Mechanism study of the Mn‐substituted magnesium borate: Decreased sintering temperature and improved dielectric property
The influence of manganese substitution on the sintering and dielectric properties of Mg3B2O6 (MBO) was studied, and the detailed mechanism of variation was discussed using density functional theory calculations. The characterization method involved a network analyser, differential–thermal analyses, thermomechanical analyses, X‐ray diffraction, and scanning electron microscopy. Manganese substitution formed a two‐phase system (MBO and Mg2B2O5), improved the dielectric property, densified the microstructure, lowered the activation energy, decreased the crystallite size, modified the band structure property, and strengthened the covalency of MgO6 octahedron. The 7% mole substitution of manganese to magnesium improved the dielectric properties of MBO to 7.06 for εr and 61 100 GHz at 15 GHz for Q × f, −54.8 ppm/°C for τf. The intrinsic densification temperature decreased from 1350 to 1175°C with 97.7% relative density.
- 1 June 2020
- Published by Elsevier in Ceramics International
- Vol. 46 (9) , 13737-13742
Structure and microwave dielectric properties of Li2Mg3Ti1-x(Al1/2Nb1/2)xO6 ceramics
- 1 June 2020
- Published by Elsevier in Ceramics International
- Vol. 46 (9) , 13737-13742
Structure and microwave dielectric properties of Li2Mg3Ti1-x(Al1/2Nb1/2)xO6 ceramics
- Open Access
- 1 March 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 784 (1)
Temperature Stable and Low Loss Microwave Dielectric Ceramics of Li2Mg3-xSrxTiO6
In this paper, a series of Li2Mg3-xSrxTiO6 (x = 0, 0.02, 0.04, 0.06, 0.08) ceramics were prepared by the conventional solid-state reaction method. The effects of Sr2+ substitution on the structure, morphology and microwave dielectric properties of Li2Mg3TiO6 ceramics were investigated. The X-ray diffraction (XRD) results indicated that Li2Mg3TiO6 and SrTiO3 phases stably coexisted with each other and formed composite materilas. The appearance of porous structure mainly originated from the volatilization of lithium at high sintering temperatures. As the Sr2+ content increased from 0 to 0.08, the optimum dielectric constant (ε r ) increased from 13.61 to 17.32, the quality factor (Q×f) decreased monotonously and the temperature coefficient of resonant frequency (τ f ) changed from -34.4 to +16.8 ppm/°C. The variations of ε r , Q×f and τ f could be explained by the Lichtenecker logarithmic model and mixing rule, respectively. In particular, optimal microwave dielectric properties of ε r = 16.08, Q×f = 82100 GHz, τ f = +1.7 ppm/°C were obtained for Li2Mg2.94Sr0.06TiO6 ceramic sintered at 1310 °C for 5h.
- 1 March 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 784 (1)
Open AccessTemperature Stable and Low Loss Microwave Dielectric Ceramics of Li2Mg3-xSrxTiO6
In this paper, a series of Li2Mg3-xSrxTiO6 (x = 0, 0.02, 0.04, 0.06, 0.08) ceramics were prepared by the conventional solid-state reaction method. The effects of Sr2+ substitution on the structure, morphology and microwave dielectric properties of Li2Mg3TiO6 ceramics were investigated. The X-ray diffraction (XRD) results indicated that Li2Mg3TiO6 and SrTiO3 phases stably coexisted with each other and formed composite materilas. The appearance of porous structure mainly originated from the volatilization of lithium at high sintering temperatures. As the Sr2+ content increased from 0 to 0.08, the optimum dielectric constant (ε r ) increased from 13.61 to 17.32, the quality factor (Q×f) decreased monotonously and the temperature coefficient of resonant frequency (τ f ) changed from -34.4 to +16.8 ppm/°C. The variations of ε r , Q×f and τ f could be explained by the Lichtenecker logarithmic model and mixing rule, respectively. In particular, optimal microwave dielectric properties of ε r = 16.08, Q×f = 82100 GHz, τ f = +1.7 ppm/°C were obtained for Li2Mg2.94Sr0.06TiO6 ceramic sintered at 1310 °C for 5h.
- 1 December 2019
- Published by Elsevier in Ceramics International
- Vol. 45 (17) , 23509-23514
Correlation between structure characteristics and dielectric properties of Li2Mg3-xCuxTiO6 ceramics based on complex chemical bond theory
- 1 December 2019
- Published by Elsevier in Ceramics International
- Vol. 45 (17) , 23509-23514
Correlation between structure characteristics and dielectric properties of Li2Mg3-xCuxTiO6 ceramics based on complex chemical bond theory
- 1 December 2019
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 238
Temperature stability and chemical compatibility of novel Li1.6Zn1.6Sn2.8O8 ceramics
- 1 December 2019
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 238
Temperature stability and chemical compatibility of novel Li1.6Zn1.6Sn2.8O8 ceramics