Yue Zheng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Yue Zheng has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Chip-Hong Chang
Nanyang technological university, Singapore, Singapore
12 shared publications - Yuan Cao
College of Information Science and Engineering, Hohai University, Changzhou, China
5 shared publications - Wenye Liu
School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore
3 shared publications Wenye Liu
2 shared publications- Xiaojin Zhao
Shenzhen University
2 shared publications - Aijiao Cui
Harbin Institute of Technology (Shenzhen)
1 shared publication
Latest Publications
- 25 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Mobile Computing
- Vol. 25 (5) , 6352-6368
A Lightweight PUF-Based Secure Group Communication Scheme for Low Altitude Network With Dynamic Group Membership
Low Altitude Network (LAN) has emerged as a critical infrastructure for applications such as surveillance and emergency response. Group communication for LAN offers enhanced energy efficiency and reduced network overhead. However, existing group communication protocols encounter difficulties in managing the rekeying process efficiently for a dynamic group or require computationally expensive public key primitives for shared secret handshaking to overcome this challenge. Moreover, the security of most of the existing protocols relies primarily on the safekeeping of some secrets on the group members’ devices. To overcome these limitations, we propose a novel physical unclonable function (PUF)-based lightweight secure group communication protocol. The proposed protocol utilizes a combination of the device’s PUF and the one-time pad (OTP) to eliminate secure key storage at both group verifier and prover nodes, and achieves perfect forward secrecy (PFS) by eliminating dependence on static long-term secrets. The proposed protocol also supports efficient group key renewal by using a full binary tree as a secret vault for sharing and updating distributed secrets with the Chinese Remainder Theorem (CRT). Meantime, this data structure also reduces the computation and communication complexity for key renewal to$O(\log_{2}N)$ at the cluster head and$O(1)$ at the sensor nodes. A comparative analysis shows that the proposed protocol surpasses related protocols in terms of security features and overheads in computation, communication, as well as secret storage requirements. The proposed protocol was also validated by formal security analyses and a physical LAN implementation using Ultra96-V2 boards as cluster nodes.- 25 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Mobile Computing
- Vol. 25 (5) , 6352-6368
A Lightweight PUF-Based Secure Group Communication Scheme for Low Altitude Network With Dynamic Group Membership
Low Altitude Network (LAN) has emerged as a critical infrastructure for applications such as surveillance and emergency response. Group communication for LAN offers enhanced energy efficiency and reduced network overhead. However, existing group communication protocols encounter difficulties in managing the rekeying process efficiently for a dynamic group or require computationally expensive public key primitives for shared secret handshaking to overcome this challenge. Moreover, the security of most of the existing protocols relies primarily on the safekeeping of some secrets on the group members’ devices. To overcome these limitations, we propose a novel physical unclonable function (PUF)-based lightweight secure group communication protocol. The proposed protocol utilizes a combination of the device’s PUF and the one-time pad (OTP) to eliminate secure key storage at both group verifier and prover nodes, and achieves perfect forward secrecy (PFS) by eliminating dependence on static long-term secrets. The proposed protocol also supports efficient group key renewal by using a full binary tree as a secret vault for sharing and updating distributed secrets with the Chinese Remainder Theorem (CRT). Meantime, this data structure also reduces the computation and communication complexity for key renewal to$O(\log_{2}N)$ at the cluster head and$O(1)$ at the sensor nodes. A comparative analysis shows that the proposed protocol surpasses related protocols in terms of security features and overheads in computation, communication, as well as secret storage requirements. The proposed protocol was also validated by formal security analyses and a physical LAN implementation using Ultra96-V2 boards as cluster nodes.- Open Access
- 9 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Emerging and Selected Topics in Circuits and Systems
- Vol. PP (21563357) , 1
An Overview of Trustworthy AI: Advances in IP Protection, Privacy-preserving Federated Learning, Security Verification, and GAI Safety Alignment
AI has undergone a remarkable evolution journey marked by groundbreaking milestones. Like any powerful tool, it can be turned into a weapon for devastation in the wrong hands. Understanding that no model is perfect, trustworthy AI is initiated with an intuitive aim to mitigate the harm it can inflict on people and society by prioritizing socially responsible AI ideation, design, development, and deployment towards effecting positive changes. The scope of trustworthy AI is encompassing, covering qualities such as safety, security, privacy, transparency, explainability, fairness, impartiality, robustness, reliability, and accountability. This overview paper anchors on recent advances in four research hotspots of trustworthy AI with compelling and challenging security, privacy, and safety issues. The topics discussed include the intellectual property protection of deep learning and generative models, the trustworthiness of federated learning, verification and testing tools of AI systems, and the safety alignment of generative AI systems. Through this comprehensive review, we aim to provide readers with an overview of the most up-to-date research problems and solutions. By presenting the rapidly evolving factors and constraints that motivate the emerging attack and defense strategies throughout the AI lifecycle, we hope to inspire more research effort into guiding AI technologies towards beneficial purposes with greater robustness against malicious use intent.
- 9 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Emerging and Selected Topics in Circuits and Systems
- Vol. PP (21563357) , 1
Open AccessAn Overview of Trustworthy AI: Advances in IP Protection, Privacy-preserving Federated Learning, Security Verification, and GAI Safety Alignment
AI has undergone a remarkable evolution journey marked by groundbreaking milestones. Like any powerful tool, it can be turned into a weapon for devastation in the wrong hands. Understanding that no model is perfect, trustworthy AI is initiated with an intuitive aim to mitigate the harm it can inflict on people and society by prioritizing socially responsible AI ideation, design, development, and deployment towards effecting positive changes. The scope of trustworthy AI is encompassing, covering qualities such as safety, security, privacy, transparency, explainability, fairness, impartiality, robustness, reliability, and accountability. This overview paper anchors on recent advances in four research hotspots of trustworthy AI with compelling and challenging security, privacy, and safety issues. The topics discussed include the intellectual property protection of deep learning and generative models, the trustworthiness of federated learning, verification and testing tools of AI systems, and the safety alignment of generative AI systems. Through this comprehensive review, we aim to provide readers with an overview of the most up-to-date research problems and solutions. By presenting the rapidly evolving factors and constraints that motivate the emerging attack and defense strategies throughout the AI lifecycle, we hope to inspire more research effort into guiding AI technologies towards beneficial purposes with greater robustness against malicious use intent.
- Open Access
- 3 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
A Lightweight PUF-based Secure Group Communication Scheme for Wireless Sensor Networks With Dynamic Group Membership
Wireless sensor network (WSN) has found widespread applications in many domains such as smart home and healthcare systems. Group communication for WSN offers enhanced energy efficiency and reduced network overhead. However, existing group communication protocols encounter difficulties in managing the rekeying process efficiently for a dynamic group or require computationally expensive public key primitives for shared secret handshaking to overcome this challenge. Moreover, the security of most of the existing protocols rely primarily on safe keeping some secrets on the group members' devices. To overcome these limitations, we propose a novel physical unclonable function (PUF)-based lightweight secure group communication protocol. PUF enables lightweight key-less authentication for resource constrained IoT devices. The proposed protocol utilizes the device's PUF and the one-time pad (OTP) to eliminate secure key storage at both group verifier and prover nodes. The proposed protocol also supports efficient group key renewal for the admission and withdrawal of group members. We achieve this by using a full binary tree as a secret vault for sharing and updating distributed secrets with Chinese Reminder Theorem. Meantime, this data structure also reduces the computation and communication complexity for key renewal to O(log 2 N) at the cluster head and O(1) at the sensor nodes. A comparative analysis shows that the proposed protocol surpasses related protocols in terms of security features and overheads in computation, communication as well as secret storage requirements.
- 3 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessA Lightweight PUF-based Secure Group Communication Scheme for Wireless Sensor Networks With Dynamic Group Membership
Wireless sensor network (WSN) has found widespread applications in many domains such as smart home and healthcare systems. Group communication for WSN offers enhanced energy efficiency and reduced network overhead. However, existing group communication protocols encounter difficulties in managing the rekeying process efficiently for a dynamic group or require computationally expensive public key primitives for shared secret handshaking to overcome this challenge. Moreover, the security of most of the existing protocols rely primarily on safe keeping some secrets on the group members' devices. To overcome these limitations, we propose a novel physical unclonable function (PUF)-based lightweight secure group communication protocol. PUF enables lightweight key-less authentication for resource constrained IoT devices. The proposed protocol utilizes the device's PUF and the one-time pad (OTP) to eliminate secure key storage at both group verifier and prover nodes. The proposed protocol also supports efficient group key renewal for the admission and withdrawal of group members. We achieve this by using a full binary tree as a secret vault for sharing and updating distributed secrets with Chinese Reminder Theorem. Meantime, this data structure also reduces the computation and communication complexity for key renewal to O(log 2 N) at the cluster head and O(1) at the sensor nodes. A comparative analysis shows that the proposed protocol surpasses related protocols in terms of security features and overheads in computation, communication as well as secret storage requirements.
- 26 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 70 (12) , 4900-4913
A New Reconfigurable True Random Number Generator and Physical Unclonable Function Unified Chip With On-Chip Auto-Calibration
True random number generator (TRNG) and physical unclonable function (PUF) have been extensively used to secure low-cost Internet of Things (IoT) endpoints. In this paper, a lightweight reconfigurable TRNG and PUF unified design for custom chip implementation is proposed. The reconfigurable structure consists of a pair of ring oscillators (ROs) with interposed multi-way switches for RO length reconfiguration and shared counters for on-chip calibration. Jitter noise of ROs and metastability of arbiter are harmonized for TRNG operation, while process variations of ROs are extracted for PUF operation. The conflicting requirements on frequency deviation for the randomness of TRNG and the reliability of PUF are resolved by an on-chip calibrator, which automatically selects and stores a challenge with a small frequency difference in TRNG mode upon manufacturing and masks unreliable challenges with large frequency difference during PUF enrollment. Leveraging the advantage of custom chip design, the basic delay cell of the reconfigurable ROs is realized by current starved inverter in weak inversion to minimize the power consumption, increase the jitter, and avail its larger process variation. A new lightweight secure mutual authentication protocol is also proposed to effectively thwart machine learning, replay and man-in-the-middle attacks using only the underlying TRNG and PUF without requiring any other security primitives. The proposed TRNG-PUF design is prototyped with a standard 40 nm 1.1 V CMOS process. It occupies a small footprint of 24,316 $\pmb{\mu m^{2}}$ . Measured results of the packaged chips show an average energy efficiency of 7.42 pJ/bit in TRNG operation and 0.10 pJ/bit in PUF operation. The bitstreams generated by the test chips passed NIST SP 800-22 and 90B tests, autocorrelation test, and FFT test.
- 26 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 70 (12) , 4900-4913
A New Reconfigurable True Random Number Generator and Physical Unclonable Function Unified Chip With On-Chip Auto-Calibration
True random number generator (TRNG) and physical unclonable function (PUF) have been extensively used to secure low-cost Internet of Things (IoT) endpoints. In this paper, a lightweight reconfigurable TRNG and PUF unified design for custom chip implementation is proposed. The reconfigurable structure consists of a pair of ring oscillators (ROs) with interposed multi-way switches for RO length reconfiguration and shared counters for on-chip calibration. Jitter noise of ROs and metastability of arbiter are harmonized for TRNG operation, while process variations of ROs are extracted for PUF operation. The conflicting requirements on frequency deviation for the randomness of TRNG and the reliability of PUF are resolved by an on-chip calibrator, which automatically selects and stores a challenge with a small frequency difference in TRNG mode upon manufacturing and masks unreliable challenges with large frequency difference during PUF enrollment. Leveraging the advantage of custom chip design, the basic delay cell of the reconfigurable ROs is realized by current starved inverter in weak inversion to minimize the power consumption, increase the jitter, and avail its larger process variation. A new lightweight secure mutual authentication protocol is also proposed to effectively thwart machine learning, replay and man-in-the-middle attacks using only the underlying TRNG and PUF without requiring any other security primitives. The proposed TRNG-PUF design is prototyped with a standard 40 nm 1.1 V CMOS process. It occupies a small footprint of 24,316 $\pmb{\mu m^{2}}$ . Measured results of the packaged chips show an average energy efficiency of 7.42 pJ/bit in TRNG operation and 0.10 pJ/bit in PUF operation. The bitstreams generated by the test chips passed NIST SP 800-22 and 90B tests, autocorrelation test, and FFT test.
- 4 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 70 (12) , 5011-5024
An Imperceptible Data Augmentation Based Blackbox Clean-Label Backdoor Attack on Deep Neural Networks
Deep neural networks (DNNs) have permeated into many diverse application domains, making them attractive targets of malicious attacks. DNNs are particularly susceptible to data poisoning attacks. Such attacks can be made more venomous and harder to detect by poisoning the training samples without changing their ground-truth labels. Despite its pragmatism, the clean-label requirement imposes a stiff restriction and strong conflict in simultaneous optimization of attack stealth, success rate, and utility of the poisoned model. Attempts to circumvent the pitfalls often lead to a high injection rate, ineffective embedded backdoors, unnatural triggers, low transferability, and/or poor robustness. In this paper, we overcome these constraints by amalgamating different data augmentation techniques for the backdoor trigger. The spatial intensities of the augmentation methods are iteratively adjusted by interpolating the clean sample and its augmented version according to their tolerance to perceptual loss and augmented feature saliency to target class activation. Our proposed attack is comprehensively evaluated on different network models and datasets. Compared with state-of-the-art clean-label backdoor attacks, it has lower injection rate, stealthier poisoned samples, higher attack success rate, and greater backdoor mitigation resistance while preserving high benign accuracy. Similar attack success rates are also demonstrated on the Intel Neural Compute Stick 2 edge AI device implementation of the poisoned model after weight-pruning and quantization.
- 4 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 70 (12) , 5011-5024
An Imperceptible Data Augmentation Based Blackbox Clean-Label Backdoor Attack on Deep Neural Networks
Deep neural networks (DNNs) have permeated into many diverse application domains, making them attractive targets of malicious attacks. DNNs are particularly susceptible to data poisoning attacks. Such attacks can be made more venomous and harder to detect by poisoning the training samples without changing their ground-truth labels. Despite its pragmatism, the clean-label requirement imposes a stiff restriction and strong conflict in simultaneous optimization of attack stealth, success rate, and utility of the poisoned model. Attempts to circumvent the pitfalls often lead to a high injection rate, ineffective embedded backdoors, unnatural triggers, low transferability, and/or poor robustness. In this paper, we overcome these constraints by amalgamating different data augmentation techniques for the backdoor trigger. The spatial intensities of the augmentation methods are iteratively adjusted by interpolating the clean sample and its augmented version according to their tolerance to perceptual loss and augmented feature saliency to target class activation. Our proposed attack is comprehensively evaluated on different network models and datasets. Compared with state-of-the-art clean-label backdoor attacks, it has lower injection rate, stealthier poisoned samples, higher attack success rate, and greater backdoor mitigation resistance while preserving high benign accuracy. Similar attack success rates are also demonstrated on the Intel Neural Compute Stick 2 edge AI device implementation of the poisoned model after weight-pruning and quantization.
- Open Access
- 11 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Information Forensics and Security
- Vol. 17 (15566013) , 2977-2989
A DNN Fingerprint for Non-Repudiable Model Ownership Identification and Piracy Detection
A high-performance Deep Neural Network (DNN) model is a valuable intellectual property (IP) since designing and training such a model from scratch is very costly. Model transfer learning, compression and retraining are commonly used by pirates to evade detection or even redeploy the pirated models for new applications without compromising performance. This paper presents a novel non-intrusive DNN IP fingerprinting method that can detect pirated models and provide a non-repudiable and irrevocable ownership proof simultaneously. The fingerprint is derived from projecting a subset of front-layer weights onto a model owner identity defined random space to enable a distinguisher to differentiate pirated models that are used in the same application or retrained for a different task from originally designed DNN models. The proposed method generates compact and irrevocable fingerprints against model IP misappropriation and ownership fraud. It requires no retraining and makes no modification to the original model. The proposed fingerprinting method is evaluated on nine original DNN models trained on CIFAR-10, CIFAR-100, and ImageNet-10. It is demonstrated to have the highest discriminative power among existing fingerprinting methods in detecting pirated models deployed for the same and different applications, and fraudulent model IP ownership claims.
- 11 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Information Forensics and Security
- Vol. 17 (15566013) , 2977-2989
Open AccessA DNN Fingerprint for Non-Repudiable Model Ownership Identification and Piracy Detection
A high-performance Deep Neural Network (DNN) model is a valuable intellectual property (IP) since designing and training such a model from scratch is very costly. Model transfer learning, compression and retraining are commonly used by pirates to evade detection or even redeploy the pirated models for new applications without compromising performance. This paper presents a novel non-intrusive DNN IP fingerprinting method that can detect pirated models and provide a non-repudiable and irrevocable ownership proof simultaneously. The fingerprint is derived from projecting a subset of front-layer weights onto a model owner identity defined random space to enable a distinguisher to differentiate pirated models that are used in the same application or retrained for a different task from originally designed DNN models. The proposed method generates compact and irrevocable fingerprints against model IP misappropriation and ownership fraud. It requires no retraining and makes no modification to the original model. The proposed fingerprinting method is evaluated on nine original DNN models trained on CIFAR-10, CIFAR-100, and ImageNet-10. It is demonstrated to have the highest discriminative power among existing fingerprinting methods in detecting pirated models deployed for the same and different applications, and fraudulent model IP ownership claims.
- 25 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dependable and Secure Computing
- Vol. 20 (4) , 3299-3316
PUF-Based Mutual Authentication and Key Exchange Protocol for Peer-to-Peer IoT Applications
Peer to Peer (P2P) or direct connection IoT has become increasingly popular owing to its lower latency and higher privacy compared to database-driven or server-based IoT. However, wireless vulnerabilities raise severe concerns on IoT device-to-device communication. This is further aggravated by the challenge to achieve lightweight direct mutual authentication and secure key exchange between IoT peer nodes in P2P IoT applications. Physical unclonable function (PUF) is a key enabler to lightweight, low-power and secure authentication of resource-constrained devices in IoT. Nevertheless, current PUF-enabled authentication protocols, with or without the challenge-response pairs (CRPs) of each of its interlocutors stored in the verifier's side, are incompatible for P2P IoT scenarios due to the security, storage and computing power limitations of IoT devices. To solve this problem, a new lightweight PUF-based mutual authentication and key exchange protocol is proposed. It allows two resource-constrained PUF embedded endpoint devices to authenticate each other directly without the need for local storage of CRPs or any private secrets, and simultaneously establish the session key for secure data exchange without resorting to the public-key algorithm. The proposed protocol is evaluated using the game-based formal security analysis method as well as the automatic security analysis tool ProVerif to corroborate its mutual authenticity, secrecy, and resistance against replay and man-in-the-middle (MITM) attacks. Using two Avnet Ultra96-V2 boards to emulate the two IoT endpoint devices, a physical prototype system is also constructed to demonstrate and validate the feasibility of the proposed secure P2P connection scheme. A comparative analysis shows that the proposed protocol outperforms related protocols in terms of security features, computational complexity as well as communication and storage costs.
- 25 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dependable and Secure Computing
- Vol. 20 (4) , 3299-3316
PUF-Based Mutual Authentication and Key Exchange Protocol for Peer-to-Peer IoT Applications
Peer to Peer (P2P) or direct connection IoT has become increasingly popular owing to its lower latency and higher privacy compared to database-driven or server-based IoT. However, wireless vulnerabilities raise severe concerns on IoT device-to-device communication. This is further aggravated by the challenge to achieve lightweight direct mutual authentication and secure key exchange between IoT peer nodes in P2P IoT applications. Physical unclonable function (PUF) is a key enabler to lightweight, low-power and secure authentication of resource-constrained devices in IoT. Nevertheless, current PUF-enabled authentication protocols, with or without the challenge-response pairs (CRPs) of each of its interlocutors stored in the verifier's side, are incompatible for P2P IoT scenarios due to the security, storage and computing power limitations of IoT devices. To solve this problem, a new lightweight PUF-based mutual authentication and key exchange protocol is proposed. It allows two resource-constrained PUF embedded endpoint devices to authenticate each other directly without the need for local storage of CRPs or any private secrets, and simultaneously establish the session key for secure data exchange without resorting to the public-key algorithm. The proposed protocol is evaluated using the game-based formal security analysis method as well as the automatic security analysis tool ProVerif to corroborate its mutual authenticity, secrecy, and resistance against replay and man-in-the-middle (MITM) attacks. Using two Avnet Ultra96-V2 boards to emulate the two IoT endpoint devices, a physical prototype system is also constructed to demonstrate and validate the feasibility of the proposed secure P2P connection scheme. A comparative analysis shows that the proposed protocol outperforms related protocols in terms of security features, computational complexity as well as communication and storage costs.
- 15 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 69 (1) , 272-283
A New Energy-Efficient and High Throughput Two-Phase Multi-Bit per Cycle Ring Oscillator-Based True Random Number Generator
Oscillator-based elementary true random number generator (TRNG) uses a slow jittery ring oscillator (RO) to sample a fast RO. The ROs are always on but most of the oscillatory cycles of the fast RO are not sampled into random bits. In this paper, a new lightweight TRNG design is proposed to minimize the power wasted by the superfluous oscillations. Random bits are extracted from both phases of the slow ROs to increase the throughput and the fast RO is activated only during the narrow transition time difference between two symmetrically designed slow ROs. The slow jittery ROs are implemented using current starved inverters biased in the weak inversion region to reduce their power consumption. Their jitter amplitudes are increased by lowering the oscillation frequency and reducing the drain current of the transistors. The narrow jittery pulse generated by the differential pair of slow ROs is quantized by the fastest three-stage RO. Two random bits from each phase of the jittery ROs can be extracted by using a gigahertz dynamic toggled D flip-flop counter to count the number of oscillatory cycles of the fast RO. The proposed TRNG is fabricated in a standard 65 nm 1.2 V CMOS process. Measurement results of the fabricated chips show that the proposed TRNG consumes merely $260~\mu \text{W}$ at a bit rate of 52 Mbps. It outperforms the state-of-art on-chip jitter-based TRNGs with the best figure-of-merit of 5 pJ/bit and the smallest footprint of $366~\mu \text{m}^{2}$ . Its generated bit sequence passes the statistical randomness tests including National Institute of Standards and Technology (NIST) test, Auto Correlation Factor (ACF) test and bias. The mean redundancy of the ten tested chips is measured to be less than 10 −5 bit/symbol.
- 15 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 69 (1) , 272-283
A New Energy-Efficient and High Throughput Two-Phase Multi-Bit per Cycle Ring Oscillator-Based True Random Number Generator
Oscillator-based elementary true random number generator (TRNG) uses a slow jittery ring oscillator (RO) to sample a fast RO. The ROs are always on but most of the oscillatory cycles of the fast RO are not sampled into random bits. In this paper, a new lightweight TRNG design is proposed to minimize the power wasted by the superfluous oscillations. Random bits are extracted from both phases of the slow ROs to increase the throughput and the fast RO is activated only during the narrow transition time difference between two symmetrically designed slow ROs. The slow jittery ROs are implemented using current starved inverters biased in the weak inversion region to reduce their power consumption. Their jitter amplitudes are increased by lowering the oscillation frequency and reducing the drain current of the transistors. The narrow jittery pulse generated by the differential pair of slow ROs is quantized by the fastest three-stage RO. Two random bits from each phase of the jittery ROs can be extracted by using a gigahertz dynamic toggled D flip-flop counter to count the number of oscillatory cycles of the fast RO. The proposed TRNG is fabricated in a standard 65 nm 1.2 V CMOS process. Measurement results of the fabricated chips show that the proposed TRNG consumes merely $260~\mu \text{W}$ at a bit rate of 52 Mbps. It outperforms the state-of-art on-chip jitter-based TRNGs with the best figure-of-merit of 5 pJ/bit and the smallest footprint of $366~\mu \text{m}^{2}$ . Its generated bit sequence passes the statistical randomness tests including National Institute of Standards and Technology (NIST) test, Auto Correlation Factor (ACF) test and bias. The mean redundancy of the ten tested chips is measured to be less than 10 −5 bit/symbol.
- Open Access
- 17 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
PUF-based Mutual Authentication and Key-Exchange Protocol For Peer-to-Peer IoT Applications
Peer to Peer (P2P) or direct connection IoT has become increasingly popular owing to its lower latency and higher privacy compared to database-driven or server-based IoT. However, wireless vulnerabilities raise severe concerns on IoT device-to-device communication. This is further aggravated by the challenge to achieve lightweight direct mutual authentication and secure key exchange between IoT peer nodes in P2P IoT applications. Physical unclonable function (PUF) is a key enabler to lightweight, low-power and secure authentication of resource-constrained devices in IoT. Nevertheless, current PUF-enabled authentication protocols, with or without the challenge-response pairs (CRPs) of each of its interlocutors stored in the verifier’s side, are incompatible for P2P IoT scenarios due to the security, storage and computing power limitations of IoT devices. To solve this problem, a new lightweight PUF-based mutual authentication and key-exchange protocol is proposed. It allows two resource-constrained PUF embedded endpoint devices to authenticate each other directly without the need for local storage of CRP or any private secrets, and simultaneously establish the session key for secure data exchange without resorting to public-key algorithm. The proposed protocol is evaluated using the Mao and Boyd logic as well as the automatic security analysis tool ProVerif to corroborate its mutual authenticity, secrecy, and resistance against replay and man-in-the-middle attacks. Using two Avnet Ultra96-V2 boards to emulate the two IoT endpoint devices of a network, a physical prototype system is also constructed to demonstrate and validate the feasibility of the proposed secure P2P connection scheme.
- 17 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessPUF-based Mutual Authentication and Key-Exchange Protocol For Peer-to-Peer IoT Applications
Peer to Peer (P2P) or direct connection IoT has become increasingly popular owing to its lower latency and higher privacy compared to database-driven or server-based IoT. However, wireless vulnerabilities raise severe concerns on IoT device-to-device communication. This is further aggravated by the challenge to achieve lightweight direct mutual authentication and secure key exchange between IoT peer nodes in P2P IoT applications. Physical unclonable function (PUF) is a key enabler to lightweight, low-power and secure authentication of resource-constrained devices in IoT. Nevertheless, current PUF-enabled authentication protocols, with or without the challenge-response pairs (CRPs) of each of its interlocutors stored in the verifier’s side, are incompatible for P2P IoT scenarios due to the security, storage and computing power limitations of IoT devices. To solve this problem, a new lightweight PUF-based mutual authentication and key-exchange protocol is proposed. It allows two resource-constrained PUF embedded endpoint devices to authenticate each other directly without the need for local storage of CRP or any private secrets, and simultaneously establish the session key for secure data exchange without resorting to public-key algorithm. The proposed protocol is evaluated using the Mao and Boyd logic as well as the automatic security analysis tool ProVerif to corroborate its mutual authenticity, secrecy, and resistance against replay and man-in-the-middle attacks. Using two Avnet Ultra96-V2 boards to emulate the two IoT endpoint devices of a network, a physical prototype system is also constructed to demonstrate and validate the feasibility of the proposed secure P2P connection scheme.