Arnaldo Moreno
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Arnaldo Moreno has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
Encarna Blasco
Instituto de Tecnología Cerámica—Asociación de Investigación de las Industrias Cerámicas Castellon Spain
2 shared publicationsA. Olmedilla
1 shared publicationAnselmo O. Boschi
Federal University of Sao Carlos Graduate Program in Materials Science and Engineering São Carlos SP Brazil
1 shared publicationCarlos Feliu
Instituto de Tecnología Cerámica—Asociación de Investigación de las Industrias Cerámicas Castellon Spain
1 shared publication- Encarnación Blasco Roca
Inst Tecnol Ceram, Asociac Invest Ind Ceram, Castellon de La Plana, Spain
1 shared publication - Francisco A. Gilabert
Department of Materials, Textiles and Chemical Engineering (MaTCh), Mechanics of Materials and Structures (MMS), Tech Lane Ghent Science Park-Campus A, Ghent University (UGent), Technologiepark-Zwijnaarde 46, 9052 Ghent, Belgium
1 shared publication
Latest Publications
- Open Access
- 2 April 2026
- Published by Elsevier in Ceramics International
- Vol. 52 (13) , 22191-22216
Simulation of ceramic tile sintering using a modified SOVS model under industrial production conditions
- 2 April 2026
- Published by Elsevier in Ceramics International
- Vol. 52 (13) , 22191-22216
Open AccessSimulation of ceramic tile sintering using a modified SOVS model under industrial production conditions
- 11 January 2021
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 18 (3) , 937-946
Improvement of the mechanical and aesthetic properties of a coating by inkjet technology
Different amounts of ink, made up almost entirely of a frit that devitrified abundant small crystals of anorthoclase, were applied by inkjet printing onto a traditional unfired glaze substrate. The rheological properties of the ink and porous texture of the unfired glaze substrate were characterized. The fired coatings were analyzed by SEM–EDX to determine the elemental composition at different surface depths, and their microstructure was observed. The results confirmed the validity of the ink penetration model, developed in a previous study, for describing the composition profile in inkjet coatings as a function of the applied amount of ink and pore size and volume in the unfired glaze substrate relative to average ink particle size. Microhardness and indentation modulus of the fired glaze substrate without an ink application and of the fired ink‐containing coatings were determined. The values of these properties were verified to fit a Weibull distribution function. The coatings containing an ink application at 400 and 600 dots per inch (dpi), respectively, displayed the best mechanical behavior. The study confirmed that inkjet printing a suspension with appropriate physico‐chemical characteristics onto an unfired glaze substrate substantially improved the aesthetic characteristics and mechanical properties of the resulting fired coating.
- 11 January 2021
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 18 (3) , 937-946
Improvement of the mechanical and aesthetic properties of a coating by inkjet technology
Different amounts of ink, made up almost entirely of a frit that devitrified abundant small crystals of anorthoclase, were applied by inkjet printing onto a traditional unfired glaze substrate. The rheological properties of the ink and porous texture of the unfired glaze substrate were characterized. The fired coatings were analyzed by SEM–EDX to determine the elemental composition at different surface depths, and their microstructure was observed. The results confirmed the validity of the ink penetration model, developed in a previous study, for describing the composition profile in inkjet coatings as a function of the applied amount of ink and pore size and volume in the unfired glaze substrate relative to average ink particle size. Microhardness and indentation modulus of the fired glaze substrate without an ink application and of the fired ink‐containing coatings were determined. The values of these properties were verified to fit a Weibull distribution function. The coatings containing an ink application at 400 and 600 dots per inch (dpi), respectively, displayed the best mechanical behavior. The study confirmed that inkjet printing a suspension with appropriate physico‐chemical characteristics onto an unfired glaze substrate substantially improved the aesthetic characteristics and mechanical properties of the resulting fired coating.
- 26 November 2019
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 17 (1) , 11
Ceramics for the circular economy
- 26 November 2019
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 17 (1) , 11
Ceramics for the circular economy
- 7 August 2019
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 16 (6) , 2153-2160
Inkjet technology for ceramic products. Influence of some process variables on ink penetration
Inkjet technology has become very popular in recent years and is nowadays widely used for decorating ceramic products. This has led to in‐depth study of the operating principles and process variables involved. These notably influence the properties of the deposited ink layers, as do the physicochemical properties of the applied inks and of the glazes on which the inks are deposited. The problems associated with these factors are further heightened when inks with complex formulations designed to obtain special effects and specific surface properties are used. This study examines the characteristics of the interface that developed on applying an ink on a certain type of glaze, as well as the surface properties of the final product. The relationship of the amount of ink applied per unit area and the particle size distribution (PSD) of the glaze on which it was deposited to ink penetration into the glaze layer was also investigated. The resulting microstructures were observed by SEM, while the variation of glaze layer composition with distance to the surface was determined by SEM‐EDS. The results obtained were successfully correlated with the porous texture of the unfired glaze (determined by SEM and mercury porosimetry) and with unfired glaze PSD.
- 7 August 2019
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 16 (6) , 2153-2160
Inkjet technology for ceramic products. Influence of some process variables on ink penetration
Inkjet technology has become very popular in recent years and is nowadays widely used for decorating ceramic products. This has led to in‐depth study of the operating principles and process variables involved. These notably influence the properties of the deposited ink layers, as do the physicochemical properties of the applied inks and of the glazes on which the inks are deposited. The problems associated with these factors are further heightened when inks with complex formulations designed to obtain special effects and specific surface properties are used. This study examines the characteristics of the interface that developed on applying an ink on a certain type of glaze, as well as the surface properties of the final product. The relationship of the amount of ink applied per unit area and the particle size distribution (PSD) of the glaze on which it was deposited to ink penetration into the glaze layer was also investigated. The resulting microstructures were observed by SEM, while the variation of glaze layer composition with distance to the surface was determined by SEM‐EDS. The results obtained were successfully correlated with the porous texture of the unfired glaze (determined by SEM and mercury porosimetry) and with unfired glaze PSD.
- 20 July 2016
- Published by Elsevier in Ceramics International
- Vol. 42 (14) , 16169-16179
Sintering of raw glazes for floor and porcelain tiles: A non-isothermal kinetic model
- 20 July 2016
- Published by Elsevier in Ceramics International
- Vol. 42 (14) , 16169-16179
Sintering of raw glazes for floor and porcelain tiles: A non-isothermal kinetic model