Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


M. Venkatesh has a total of 54 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Multiscale Material Characterization and ML-Based Retention Prediction of Halo-Doped InSb/SiGe Vertical TFET

    by Sudhakiran Ponnuru, Phani Ponnapalli V L N, Hosanna Princye. P, Ahila A, Viji K, Venkatesh M

  • Electrostatic Modelling and Performance Optimization of Transconductance Efficiency and Leakage Control in TMGAA Silicon Nanowire TFETs

    by Deeksha Kn Kn, Ashakirana.V V, Bhumika S, Bhoomika G G, Venkatesh M, Parthasarathy P

    Tunnel Field-Effect Transistors (TFETs) have emerged as strong candidates for next-generation ultra-low-power electronics due to their ability to achieve sub-60 mV/dec subthreshold swing and suppressed leakage characteristics. This work presents a unified analytical framework and performance enhancement strategy for Tri-Material Gate-All-Around (TM-GAA) Silicon Nanowire TFETs, integrating advancements from subthreshold analysis, transconductance-to-drain current ratio evaluation, and potential distribution modeling. A compact 2-D analytical model is developed by solving the Poisson equation using the parabolic approximation, enabling accurate estimation of minimum surface potential, subthreshold current, and transconductance efficiency across varying design parameters. The model captures gate material engineering effects, electrostatic control, oxide thickness impact, and silicon nanowire diameter dependence with high fidelity. Simulation results show that the proposed TM-GAA nanowire TFET architecture achieves a significantly improved transconductance-to-drain current ratio (up to 40 V⁻¹), reduced subthreshold swing (< 35 mV/dec), and lower leakage compared with conventional double-material and MOSFET structures. Variations in thickness, channel length, and silicon diameter are analyzed to determine optimal operating regions for analog and digital applications. TCAD simulations validate the proposed mathematical model, demonstrating excellent correlation with the analytical predictions. These findings highlight the strong potential of TM-GAA nanowire TFETs for energy-efficient integrated circuits and high-sensitivity analog front-ends.

  • Plasmon-Coupled Au–Ag Alloy/Silicon Nanowire SERS Platform for Multiplexed Detection of CA-125 and MUC1 Biomarkers

    by Vn Senthil Kumaran, K L V Ramana Kumari, A Narendra Babu, T Srinivasa Ravi Kiran, P Parthasarathy, Shoeib Amin Banday, V Vijaya Sri Bolisetty, Hashim Elshafie, M Azath, M Venkatesh, et al.

    Accurate, early-stage detection of ovarian cancer biomarkers is essential for improving patient outcomes. In this study, we present a label-free, surface-enhanced Raman spectroscopy (SERS) platform that utilizes hybrid gold–silver (Au–Ag) alloy nanostructures for the ultrasensitive detection of two key ovarian cancer biomarkers: CA-125 and MUC1. The nanostructures were engineered to amplify local electromagnetic fields, enhancing Raman signals without the need for labeling agents. The immunosensor fabrication process, including surface functionalization, antibody immobilization, and antigen recognition, was validated via UV–Visible spectroscopy. The structural and morphological features of the alloy nanostructures were characterized using atomic force microscopy (AFM) and scanning electron microscopy (SEM), confirming the formation of highly uniform and plasmonically active surfaces. Rhodamine 6G was used as a probe molecule to assess the enhancement capability, achieving an enhancement factor of approximately 1.2×10⁵. Calibration curves were developed using standard solutions of CA-125 (10–110 U/mL) and MUC1 (20–220 ng/mL), showing strong linear correlations with Raman signal intensities (R²=0.945 for CA-125 and 0.915 for MUC1) in the 700–850 nm spectral region. This Au–Ag alloy nanostructure-based SERS platform demonstrates significant promise for non-invasive, high-sensitivity ovarian cancer diagnostics in clinical settings.

  • Dielectric-Modulated Biomolecule Detection Using TiO₂/AlN-Stacked Graphene Nanoribbon BioFET with Improved Electrical Characteristics

    by V.N. Senthil Kumaran, Alavudeen Basha, P Parthasarathy, Shoeib Amin Banday, Azath Mubarakali, M Venkatesh

    In this study, a next-generation dielectric-modulated biofield-effect transistor (DM-BioFET) is proposed, incorporating a novel material stack for enhanced label-free biomolecule detection. The device employs a titanium dioxide (TiO₂) high-k gate dielectric and an aluminum nitride (AlN) cavity dielectric, which together ensure superior electrostatic control and reduced leakage compared to conventional oxide dielectrics. Graphene nanoribbons (GNRs) serve as the channel material, offering high carrier mobility and a tunable bandgap suitable for nanoscale charge detection. The source and drain regions are engineered using InAs (p-type) and GaSb (n-type) semiconductors, thereby enabling efficient tunneling transport and mitigating ambipolar leakage. For substrate insulation, silicon-on-insulator (SOI) and sapphire platforms are explored to suppress parasitic capacitance and improve stability in high-frequency operation. The sensitivity of this biosensor was systematically investigated through the interaction of various biomolecules within the cavity, including chitosan, bovine serum albumin (BSA), collagen, elastin, fibrinogen, and hemoglobin. Their distinct dielectric constants and isoelectric ranges were correlated with threshold voltage shift (ΔVth), on-current (Ion) enhancement, and subthreshold swing (SS) modulation. Simulation results demonstrate that the proposed device exhibits significant improvements in current ratio (Ion/Ioff), reduced leakage, and enhanced threshold sensitivity, particularly for protein-based biomolecules with higher dielectric permittivity.

  • Open Access

    Electrical Characterization and Response Study of a MoTe 2 -HfO 2 -TFET Biosensor for Selective Detection of MCF-10A Epithelial Cells via Dielectric-Coupled Charge Control Technique

    by V. N. Senthil Kumaran, Hashim Elshafie, Abdurrahman Saad Alqahtani, Azath Mubarakali, P. Parthasarathy, M. Venkatesh, S. Adarsh Rag

    This study presents the electrical characterization of a MoTe₂-HfO₂-TFET biosensor designed for the selective detection of MCF-10A breast epithelial cells through a dielectric-coupled charge control technique. The device employs a dual-cavity MoTe₂-HfO₂-TFET structure, where the cavities beneath the gate serve as sites for immobilizing breast cancer cell lines. Variations in the dielectric constant induced by these cells influence the device’s electrical behavior, including drain current, transconductance, and the ION/IOFF ratio, enabling highly sensitive detection. Performance is further improved by integrating a pocket and extended gate, which enhance gate control and suppress OFF-state current, resulting in superior current sensitivity. Simulation results demonstrate remarkable performance, with drain current sensitivity of 4.0×10⁹, an ION/IOFF ratio of 2.7×10⁵, transit time of 5×10⁵, and a selectivity factor of 7.9×10⁵ between MCF-10A and other breast cancer cell lines. The dielectric-coupled charge control mechanism offers additional benefits such as cost-effectiveness, ease of fabrication, and CMOS compatibility, making the biosensor suitable for scalable array-based breast cancer diagnostics. Overall, the MoTe₂-HfO₂-TFET biosensor provides a non-invasive, highly sensitive alternative to conventional techniques, holding strong potential for early breast cancer detection.


  • Enhanced Electrochemical Sensing of Dopamine and Uric Acid Using a Sol-Gel Fabricated MWCNT Array-Modified Carbon Electrode

    by Abdulrahman Saad Alqahtani, Hashim Elshafie, Alavudeen Basha A, Azath Mubarakali, Parthasarathy P, Venkatesh M

    In this study, a glassy carbon electrode (GCE) modified with a vertically aligned array of multiwalled carbon nanotubes (MWCNTs) was fabricated via a temperature-controlled sol-gel method. The vertically aligned MWCNT structure significantly enhances the electrode’s surface modification efficiency, offering superior electrochemical performance compared to conventional methods. The resulting MWCNT array-modified GCE demonstrates excellent selectivity by clearly differentiating the anodic oxidation potentials of dopamine (DA) and uric acid (UA), even in complex biological matrices. To further improve the electroactive properties, the modified electrode was pre-treated with ethanol and acetone prior to electrochemical measurements. Remarkably, this pre-treatment enabled the detection of an additional two-electron oxidation process during dopamine oxidation, associated with the conversion of 5,6-dihydroxyindole to indole-5,6-quinone—a feature not typically observed in other CNT-based electrodes. The optimized sensor exhibited high sensitivity and selectivity for the simultaneous detection of DA and UA in human serum and urine samples, achieving recovery rates ranging from 95% to 110%. These results highlight the potential of the sol-gel fabricated MWCNT array-GCE as an efficient and reliable platform for advanced biosensing applications.


  • Open Access

    Label-Free Biomolecule Detection With InP/AlGaAs Charge Plasma Dielectric-Modulated Vertical TFET Using TaN as Metal Gate

    by Hashim Elshafie, Abdulrahman Saad Alqahtani, Azath Mubarakali, Adarsh Rag S, M. Venkatesh, P. Parthasarathy

    This study introduces a label-free biosensing method for biomolecule detection utilizing an InP/AlGaAs charge plasma dielectric-modulated vertical tunnel field-effect transistor (InP/AlGaAs VTFET) featuring TaN as the metal gate. The device comprises a nanocavity beneath the gate metal adjacent to the tunnelling junction, where biomolecules engage with the dielectric material, resulting in fluctuations in the drain current. A twin metal gate architecture with laterally split dielectrics is employed to eliminate short-channel effects. The biosensor has exceptional sensitivity, attaining a peak drain current sensitivity of 2.5×109 cm−2 for biomolecules such as albumin (k=7). The gadget proficiently identifies biomolecules with varying dielectric constants and charge distributions, enabling adaptable label-free detection of diverse targets. The study examines the influence of dielectric constant on critical metrics such as Energy Band Diagrams, Drain Current, Drain Sensitivity, and subthreshold swing (SS). The overlap between the source and pocket regions, along with the introduction of an auxiliary gate, optimizes the electrical characteristics. Simulation results show that the proposed InP/AlGaAs VTFET achieves a maximum sensitivity of 3.5×103, outperforming configurations without overlap (2×103), highlights the potential of proposed InP/AlGaAs VTFET for scalable, high-sensitivity, label-free biomolecule detection.


  • Performance Optimization of High-κ Engineered TM-DG-InP/GaAs-TFET for Ultra-Sensitive Biosensing Applications: Mechanistic Insights and TCAD Simulation Analysis

    by Hashim Elshafie, A. Alavudeen Basha, Abdulrahman Saad Alqahtani, Azath Mubarakali, P. Parthasarathy, M. Venkatesh

    This study presents a computational model for an advanced dopamine biosensing platform based on a halo-doped dual-gate tunnel field-effect transistor (DGTFET) incorporating high-k dielectrics and a silicon carbide (SiC) substrate. The proposed model utilizes a heterostructure composed of indium phosphide (InP) and gallium arsenide (GaAs), optimized for high-sensitivity biomolecule detection. The computational framework is developed by solving the two-dimensional Poisson equation within a scaled graphene channel region, ensuring boundary conditions that enhance sensing performance. Key structural enhancements, including halo doping and the integration of high-k dielectric materials such as titanium dioxide (TiO2), are implemented to improve the device’s electrical behaviour. The proposed DGTFET exhibits significant performance improvements, including optimized electric field distribution, reduced drain-induced barrier lowering, controlled threshold voltage roll-off, and enhanced channel potential. The device achieves an exceptionally high ION/IOFF ratio of 1010, with an off-state current minimized to approximately 10−15 A μm−1 and an on-state current increased to around 10−5 A μm−1. These advancements make the halo-doped DGTFET highly suitable for ultra-sensitive dopamine detection. Moreover, the optimized subthreshold characteristics further enhance its capability for detecting low-concentration biomolecules. The analytical findings are corroborated through Silvaco TCAD simulations, validating the model’s accuracy and effectiveness in real-world biosensing applications.


  • Pt-Doped Reduced Graphene Oxide-Porphyrin-CNT Composite-Based Electrochemical Sensor for Simultaneous Detection of Dopamine, Serotonin and Norepinephrine

    by Hashim Elshafie, Suresh Babu Changalasetty, Alavudeen Basha A., Azath Mubarakali, Venkatesh M., Parthasarathy P.

    A novel electrochemical sensor for simultaneous and selective detection of dopamine (DA), serotonin (5-HT), and Norepinephrine (NE) was developed using a platinum-doped reduced graphene oxide-porphyrin-carbon nanotube (Pt-doped rGO-P-CNT) composite. This composite leverages the synergistic effects of its individual components: the aromatic π–π interactions and electrostatic attraction provided by porphyrin-functionalized graphene, the enhanced electron transfer capability from platinum doping, and the high surface area and conductivity of carbon nanotubes. The composite was synthesized in a multi-step process, starting with the oxidation of graphite to produce graphene oxide (GO), followed by reduction of GO and functionalization with porphyrin. Platinum nanoparticles were incorporated using a chemical reduction method, and carbon nanotubes were introduced to further improve conductivity and surface area. Electrochemical characterization demonstrated excellent separation of oxidation peak potentials for DA, 5-HT, and NE, allowing for precise multiplexed detection. The Pt-doped rGO-P-CNT composite showed high electrocatalytic activity and selectivity, with minimal interference from ascorbic acid. The sensor achieved a detection limit as low as 0.012 μM for DA & 5-HT and 0.015 μM for NE. Real-sample analyses in human urine and serum demonstrated the sensor’s practicality, achieving satisfactory recoveries and reproducibility. This Pt-doped rGO-P-CNT composite addresses key limitations in electrochemical biosensing.


  • Analysis on density of states and ION/IOFF ratio of GaN/GaN-graphene nanoribbon tunnel FET for enhanced bio-sensing applications

    by Senthil Kumaran V N, Venkatesh M, Shreeshayana R, Manjunath V Gudur, Parthasarathy P

    This research introduces a new analytical model that studies the effect of ferro-dielectric on the operational performance of TFETs doped with halogens. The effect of source and drain depletions, voltage-drain & gate, thickness and capacitance of gate insulator are all investigated in this study. Accurate measurements of the surface potential are required to ascertain the transconductance, gate-to-drain capacitance, and lateral electric field of the device. Our model, which employs Ferroelectric Halo-Doped double gate (FHDD)-gated device designs, has been demonstrated to produce results that nearly match those produced from TCAD simulations. This was accomplished by doing a comparative analysis of the outcomes derived from both sets of simulations. Furthermore, the performance of the suggested structure of TFET, which integrates a dielectric of Fe and GaN heterostructure, surpasses that of other similar devices (fT) in terms of ON current, ON/OFF ratio, transconductance, and cut-off frequency. A ferroelectric dielectric was used to create a ferroelectric heterostructure. This study also centers on the creation and application of a graphene nanoribbon field effect transistor (GNR-TFET) to detect sugar molecules, specifically fructose, xylose, and glucose. The detecting signal is generated by utilizing the fluctuation in the electrical current of the GNR-TFET caused by the presence of individual sugar molecules. The GNR-TFET exhibits noticeable variations in the density of states, transmission spectrum, and current when exposed to individual sugar molecules. The sensor under investigation is being developed and examined using a combination of semi-empirical modeling and non-equilibrium Green’s functional theory (SE + NEGF). According to the research, the modified GNR TFET has the ability to quickly and accurately detect individual sugar molecules in real-time.