Baoming Gong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Baoming Gong has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
Caiyan Deng
Department of Materials Science and Engineering, Tianjin University, Tianjin, China
6 shared publications- Caiyan Deng
School of Materials Science and Engineering, Tianjin University, Tianjin 300350, China
2 shared publications Dongpo Wang
Tianjin Univ, Sch Mat Sci & Engn, Tianjin Key Lab Adv Joining Technol, Tianjin, Peoples R China
2 shared publications- Giuseppe Lacidogna
Department of Structural, Geotechnical and Building Engineering, Politecnico di Torino, Turin, Italy
2 shared publications - Qian Ding
Department of Mechanics, Tianjin University, Tianjin, China
2 shared publications Yangyang Zhao
Department of Aeronautics and Astronautics, Tianjin Sino-German University of Applied Sciences, Tianjin, China
2 shared publications
Latest Publications
- 30 September 2026
- Published by Springer Nature in Welding in the World
- Vol. 70 (12) , 6353-6365
Fatigue failure transition analysis of lap-welded joints in thin plates by means of the strain energy density approach
- 30 September 2026
- Published by Springer Nature in Welding in the World
- Vol. 70 (12) , 6353-6365
Fatigue failure transition analysis of lap-welded joints in thin plates by means of the strain energy density approach
- Open Access
Numerical Investigation of the Influence of Geometric Features and Weld Metal Properties on Stress and Strain States in X80 Girth Welds
In the design and integrity assessment of long-distance natural gas pipelines, it is critical to assess how geometrical features and material properties influence the stress and strain states of girth welds. This study conducted an extensive three-dimensional finite element analysis for X80 pipeline girth welds with varying geometric features and material properties to examine stress triaxiality and strain distribution phenomena. The effect of the wall thickness ratio, misalignment, strength matching coefficient, and yield-to-tensile ratio of the weld metal was analyzed under both unloaded and internal pressure-loaded conditions. The results demonstrate that stress triaxiality and local strain increase with the wall thickness ratio, amplified by increasing misalignment, yield-to-tensile ratio, and internal pressure. Enhancing weld metal strength correspondingly improves root stress and strain states; nevertheless, greater wall thickness ratios and misalignment diminish this improvement. Based on these findings, design recommendations were proposed, including suitable wall thickness ratio design, strict misalignment control and the optimization of weld material properties. The findings of this study offer valuable insights into the design and assessment of pipeline girth welds exhibiting intricate geometric features.
Open AccessNumerical Investigation of the Influence of Geometric Features and Weld Metal Properties on Stress and Strain States in X80 Girth Welds
In the design and integrity assessment of long-distance natural gas pipelines, it is critical to assess how geometrical features and material properties influence the stress and strain states of girth welds. This study conducted an extensive three-dimensional finite element analysis for X80 pipeline girth welds with varying geometric features and material properties to examine stress triaxiality and strain distribution phenomena. The effect of the wall thickness ratio, misalignment, strength matching coefficient, and yield-to-tensile ratio of the weld metal was analyzed under both unloaded and internal pressure-loaded conditions. The results demonstrate that stress triaxiality and local strain increase with the wall thickness ratio, amplified by increasing misalignment, yield-to-tensile ratio, and internal pressure. Enhancing weld metal strength correspondingly improves root stress and strain states; nevertheless, greater wall thickness ratios and misalignment diminish this improvement. Based on these findings, design recommendations were proposed, including suitable wall thickness ratio design, strict misalignment control and the optimization of weld material properties. The findings of this study offer valuable insights into the design and assessment of pipeline girth welds exhibiting intricate geometric features.
- 17 September 2024
- Published by Elsevier in Theoretical and Applied Fracture Mechanics
- Vol. 134
Mean stress effect on crack propagation threshold at high stress ratios
- 17 September 2024
- Published by Elsevier in Theoretical and Applied Fracture Mechanics
- Vol. 134
Mean stress effect on crack propagation threshold at high stress ratios
- 22 May 2024
- Published by Elsevier in Journal of Constructional Steel Research
- Vol. 219
Fracture analysis of X80 welded joints with variable wall thickness and misalignment
- 22 May 2024
- Published by Elsevier in Journal of Constructional Steel Research
- Vol. 219
Fracture analysis of X80 welded joints with variable wall thickness and misalignment
- Open Access
- 3 December 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (23) , 12388
Characterization of Ductile Crack Propagation by Fractal Energy Dissipation Rate
Because of its geometry dependence and loss of physical meaning, the incremental crack resistance curve cannot characterize ductile fractures with large crack extensions and plastic deformations. Therefore, the energy dissipation rate R is employed to overcome these deficiencies, even though specimen size effects still exist. In the study, considering the fractal crack path and concomitant plastic dissipation in the fractal domain, a scale-invariant energy dissipation rate, γp*, is proposed in the context of renormalization group theory. Some experiments in the literature have validated this approach. The fitted fractal energy dissipation rate is independent of the specimen size and initial crack length; moreover, as the specimen size increases, progressive fractality vanishing is found consistently with geometrical multifractality.
- 3 December 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (23) , 12388
Open AccessCharacterization of Ductile Crack Propagation by Fractal Energy Dissipation Rate
Because of its geometry dependence and loss of physical meaning, the incremental crack resistance curve cannot characterize ductile fractures with large crack extensions and plastic deformations. Therefore, the energy dissipation rate R is employed to overcome these deficiencies, even though specimen size effects still exist. In the study, considering the fractal crack path and concomitant plastic dissipation in the fractal domain, a scale-invariant energy dissipation rate, γp*, is proposed in the context of renormalization group theory. Some experiments in the literature have validated this approach. The fitted fractal energy dissipation rate is independent of the specimen size and initial crack length; moreover, as the specimen size increases, progressive fractality vanishing is found consistently with geometrical multifractality.
- Open Access
Fatigue Characteristics of 7050-T7451 Aluminum Alloy Friction Stir Welding Joints and the Stress Ratio Effect
The fatigue crack initiation and growth characteristics in 7050-T7451 aluminum alloy butt joints subjected to different stress ratios and owing to friction stir welding (FSW) were investigated using fatigue tests for stress ratios of 0.1, 0.3, and 0.5. The difference between the fatigue crack initiation in the base material (BM) and FSW joints, related to coarse secondary phases, was explored using scanning electron microscopy (SEM). Accordingly, Al23CuFe4, Al7Cu2Fe, and Al2Mg3Zn3 were the preferred joint crack initiation locations, whereas Mg2Si was the major fracture initiation point of the parent material, and cracks tended to propagate along dense, coarse secondary phases, becoming more pronounced for larger cracks. In addition, as the stress ratio increased, non-Mg2Si phase fracture initiation points appeared in the BM. Meanwhile, the quantity of non-Mg2Si phases in the joints continued to increase, and the crack initiation sites became increasingly concentrated in the TMAZ-HAZ region.
Open AccessFatigue Characteristics of 7050-T7451 Aluminum Alloy Friction Stir Welding Joints and the Stress Ratio Effect
The fatigue crack initiation and growth characteristics in 7050-T7451 aluminum alloy butt joints subjected to different stress ratios and owing to friction stir welding (FSW) were investigated using fatigue tests for stress ratios of 0.1, 0.3, and 0.5. The difference between the fatigue crack initiation in the base material (BM) and FSW joints, related to coarse secondary phases, was explored using scanning electron microscopy (SEM). Accordingly, Al23CuFe4, Al7Cu2Fe, and Al2Mg3Zn3 were the preferred joint crack initiation locations, whereas Mg2Si was the major fracture initiation point of the parent material, and cracks tended to propagate along dense, coarse secondary phases, becoming more pronounced for larger cracks. In addition, as the stress ratio increased, non-Mg2Si phase fracture initiation points appeared in the BM. Meanwhile, the quantity of non-Mg2Si phases in the joints continued to increase, and the crack initiation sites became increasingly concentrated in the TMAZ-HAZ region.
- 1 January 2022
- Published by American Welding Society in Welding Journal
- Vol. 101 (1) , 27-42
VHCF Behavior of Welded Joints with HFMI Treatment under Moisture Conditions
- 1 January 2022
- Published by American Welding Society in Welding Journal
- Vol. 101 (1) , 27-42
VHCF Behavior of Welded Joints with HFMI Treatment under Moisture Conditions
- 30 June 2020
- Published by IOP Publishing in Nanotechnology
- Vol. 31 (37) , 375303
Synchronously improved reliability, figure of merit and adhesion of flexible copper nanowire networks by chitosan transition
Copper nanowires (CuNWs) are remarkable components that can replace indium tin oxide as transparent electrodes due to their low cost, high conductivity and acceptable transmittance. However, a common coating method can cause poor electrical, optical and adhesive properties because of the creation of loosely connected junctions. In addition, the unsatisfactory thermal and environmental stabilities limit the practical applications. These problems should be overcome in CuNW-based films for reliable transparent electrodes through material and engineering approaches. In this work, a novel transparent composite electrode composed of chitosan and CuNWs on a flexible polyethylene terephthalate (PET) substrate, with synchronously strengthened adhesion, as well as heightened transmittance, reduced resistivity, improved flexibility, enhanced thermal stability and increased environmental stability, was prepared without vacuum processing and high-temperature annealing. The effects of the number of CuNW network layers and chitosan concentration on the performance of chitosan/CuNW composite transparent electrodes were studied. The resulting electrodes exhibitan excellent conductivity (sheet resistance: 15.6 Ω sq −1 ) and a superior optical transmittance (∼87%) at 550 nm. Calculation of the figure of merit displays a high value of 168, which is the highest among all the reported CuNW-based transparent electrodes. Meanwhile, the sheet resistance did not show great change after 10 tape tests and 10 000 bending cycles, suggesting good adhesion to the PET substrate and outstanding mechanical flexibility. Moreover, the composite transparent electrodes show good stability to resist long-term storage and temperature variation in thermal environment.
- 30 June 2020
- Published by IOP Publishing in Nanotechnology
- Vol. 31 (37) , 375303
Synchronously improved reliability, figure of merit and adhesion of flexible copper nanowire networks by chitosan transition
Copper nanowires (CuNWs) are remarkable components that can replace indium tin oxide as transparent electrodes due to their low cost, high conductivity and acceptable transmittance. However, a common coating method can cause poor electrical, optical and adhesive properties because of the creation of loosely connected junctions. In addition, the unsatisfactory thermal and environmental stabilities limit the practical applications. These problems should be overcome in CuNW-based films for reliable transparent electrodes through material and engineering approaches. In this work, a novel transparent composite electrode composed of chitosan and CuNWs on a flexible polyethylene terephthalate (PET) substrate, with synchronously strengthened adhesion, as well as heightened transmittance, reduced resistivity, improved flexibility, enhanced thermal stability and increased environmental stability, was prepared without vacuum processing and high-temperature annealing. The effects of the number of CuNW network layers and chitosan concentration on the performance of chitosan/CuNW composite transparent electrodes were studied. The resulting electrodes exhibitan excellent conductivity (sheet resistance: 15.6 Ω sq −1 ) and a superior optical transmittance (∼87%) at 550 nm. Calculation of the figure of merit displays a high value of 168, which is the highest among all the reported CuNW-based transparent electrodes. Meanwhile, the sheet resistance did not show great change after 10 tape tests and 10 000 bending cycles, suggesting good adhesion to the PET substrate and outstanding mechanical flexibility. Moreover, the composite transparent electrodes show good stability to resist long-term storage and temperature variation in thermal environment.
- 1 December 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (12) , 126583
Effects of the heterogeneous microstructure of a 7050-T7451 aluminium alloy FSW joint on fatigue behaviour under different stress ratios
- 1 December 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (12) , 126583
Effects of the heterogeneous microstructure of a 7050-T7451 aluminium alloy FSW joint on fatigue behaviour under different stress ratios