Rintaro Shimada
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Rintaro Shimada has a total of 117 co-authors. Here are the top co-authors by number of shared publications:
- Hiro-O Hamaguchi
Department of Applied Chemistry and Institute of Molecular Science National Yang Ming Chiao Tung University Hsinchu Taiwan
6 shared publications - Takeaki Ozawa
Department of Chemistry, School of Science, The University of Tokyo, Tokyo, Japan
6 shared publications - Akira Sakamoto
Department of Chemistry and Biological Science, College of Science and Engineering, Aoyama Gakuin University, 5-10-1 Fuchinobe, Chuo-ku, Sagamihara, Kanagawa 252-5258, Japan
5 shared publications Hiro-O Hamaguchi
Department of Chemistry, School of Science, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-0033, Japan
5 shared publicationsHideaki Kano
University of Tokyo
4 shared publications- Hikaru Sotome
The University of Osaka
3 shared publications
Latest Publications
- Open Access
- 30 June 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Mechanism of Zwitterionic Photochromism in Aza-Diarylethenes Revealed by Direct Observation of a Closed-Ring Intermediate
Aza-diarylethenes have emerged as a unique class of photochromic molecules exhibiting reaction pathways that are inaccessible to conventional diarylethenes. In particular, certain azadiarylethenes generate zwitterionic closed-ring photoproducts, giving rise to unusual photochromic behavior. However, the elementary processes responsible for the formation of zwitterionic photoproducts remain unclear, hindering mechanistic understanding of this unusual class of photochromic reactions. Here, we investigate the photochromic reaction mechanism of a benzofuran-fused aza-diarylethene (BF-ADE) using steady-state spectroscopy, thermal kinetic analysis, single-crystal X-ray diffraction, visible-to-near-infrared transient absorption spectroscopy, time-resolved infrared spectroscopy, oxygen-quenching experiments, and density functional theory (DFT) calculations. Spectroscopic, computational, and crystallographic analyses consistently demonstrate that photoirradiation of BF-ADE ultimately generates a zwitterionic closed-ring isomer, BF-ADE(c-Z), while thermal bleaching proceeds through the neutral closedring isomer, BF-ADE(c). Femtosecond transient absorption spectroscopy revealed ultrafast excited-state dynamics with a characteristic time constant of 1.6 ps. More importantly, timeresolved infrared spectroscopy provided direct spectroscopic evidence for the formation of the conventional closed-ring intermediate BF-ADE(c) within the first few picoseconds after photoexcitation. Oxygen-quenching experiments combined with DFT calculations further demonstrated that BF-ADE(c-Z) is generated predominantly from BF-ADE(c) on the ground-state potential energy surface rather than through a triplet-mediated pathway. These findings provide a unified mechanistic framework for zwitterionic photochromism in aza-diarylethenes and reveal the pivotal role of a conventional closed-ring intermediate in generating zwitterionic photoproducts.
- 30 June 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessMechanism of Zwitterionic Photochromism in Aza-Diarylethenes Revealed by Direct Observation of a Closed-Ring Intermediate
Aza-diarylethenes have emerged as a unique class of photochromic molecules exhibiting reaction pathways that are inaccessible to conventional diarylethenes. In particular, certain azadiarylethenes generate zwitterionic closed-ring photoproducts, giving rise to unusual photochromic behavior. However, the elementary processes responsible for the formation of zwitterionic photoproducts remain unclear, hindering mechanistic understanding of this unusual class of photochromic reactions. Here, we investigate the photochromic reaction mechanism of a benzofuran-fused aza-diarylethene (BF-ADE) using steady-state spectroscopy, thermal kinetic analysis, single-crystal X-ray diffraction, visible-to-near-infrared transient absorption spectroscopy, time-resolved infrared spectroscopy, oxygen-quenching experiments, and density functional theory (DFT) calculations. Spectroscopic, computational, and crystallographic analyses consistently demonstrate that photoirradiation of BF-ADE ultimately generates a zwitterionic closed-ring isomer, BF-ADE(c-Z), while thermal bleaching proceeds through the neutral closedring isomer, BF-ADE(c). Femtosecond transient absorption spectroscopy revealed ultrafast excited-state dynamics with a characteristic time constant of 1.6 ps. More importantly, timeresolved infrared spectroscopy provided direct spectroscopic evidence for the formation of the conventional closed-ring intermediate BF-ADE(c) within the first few picoseconds after photoexcitation. Oxygen-quenching experiments combined with DFT calculations further demonstrated that BF-ADE(c-Z) is generated predominantly from BF-ADE(c) on the ground-state potential energy surface rather than through a triplet-mediated pathway. These findings provide a unified mechanistic framework for zwitterionic photochromism in aza-diarylethenes and reveal the pivotal role of a conventional closed-ring intermediate in generating zwitterionic photoproducts.
- 1 April 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Folding-Mediated Self-Assembly of Sterically Demanding π-Luminophore Dyads into Nanotubes Exhibiting Multidirectional Exciton Transport
The hierarchical self-assembly of folded proteins into functional nanostructures has long served as a conceptual foundation for designing synthetic polymer systems. However, the efficacy of folding-based strategies in small-molecule assemblies remains largely unproven. Here we show that sterically demanding, highly emissive diphenylanthracene derivatives, previously considered aggregation-incompetent, can be programmed to form highly ordered supramolecular nanotubes through conformational preorganization via scissor-shaped dimerization. Stepwise π-core expansion from terphenylene to diphenylnaphthalene to diphenylanthracene in the foldable supramolecular synthons induces a morphological progression from twisted ribbons to helical coils and, ultimately, to hollow nanotubes. This structural evolution is driven by folding-assisted directional π-π stacking and cooperative hydrogen bonding. Structural analyses and all-atom molecular dynamics simulations of nanotubes reveal a herringbone-like chromophore wall that reconciles dense π-stacking with curvature. Strikingly, time-resolved fluorescence anisotropy measurements demonstrate exciton migration along the tube axis (≈55 nm) and around the circumference (≈11 nm). These findings demonstrate that intramolecular folding preorganizes the spatial arrangement of intermolecular interaction sites, thereby directing curved supramolecular assembly and enabling the emergence of complex nanostructures with advanced optoelectronic function in π-systems.
- 1 April 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Folding-Mediated Self-Assembly of Sterically Demanding π-Luminophore Dyads into Nanotubes Exhibiting Multidirectional Exciton Transport
The hierarchical self-assembly of folded proteins into functional nanostructures has long served as a conceptual foundation for designing synthetic polymer systems. However, the efficacy of folding-based strategies in small-molecule assemblies remains largely unproven. Here we show that sterically demanding, highly emissive diphenylanthracene derivatives, previously considered aggregation-incompetent, can be programmed to form highly ordered supramolecular nanotubes through conformational preorganization via scissor-shaped dimerization. Stepwise π-core expansion from terphenylene to diphenylnaphthalene to diphenylanthracene in the foldable supramolecular synthons induces a morphological progression from twisted ribbons to helical coils and, ultimately, to hollow nanotubes. This structural evolution is driven by folding-assisted directional π-π stacking and cooperative hydrogen bonding. Structural analyses and all-atom molecular dynamics simulations of nanotubes reveal a herringbone-like chromophore wall that reconciles dense π-stacking with curvature. Strikingly, time-resolved fluorescence anisotropy measurements demonstrate exciton migration along the tube axis (≈55 nm) and around the circumference (≈11 nm). These findings demonstrate that intramolecular folding preorganizes the spatial arrangement of intermolecular interaction sites, thereby directing curved supramolecular assembly and enabling the emergence of complex nanostructures with advanced optoelectronic function in π-systems.
- Open Access
- 17 November 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (47) , 32529-32538
Excited State Dynamics of Geometrical Evolution of α-Substituted Dibenzoylmethanatoboron Difluoride Complex with Aggregation-Induced Emission Property
Organic molecules with an aggregation-induced emission (AIE) property have been attracting much attention from the viewpoint of application to solid state emissive materials. For the AIE mechanism, quantum mechanical studies proposed the restriction of the intramolecular motion (RIM) model with the contribution of the conical intersection (CI) and deduced the importance of the restricted access to a conical intersection (RACI) in the potential energy surface (PES). Although these theoretical studies have contributed to the elucidation of AIE phenomena, direct detection of the reaction dynamics is indispensable to clarify the actual PES and the deactivation mechanism. Along this line, we investigated excited state dynamics of the AIE molecule with dibenzoylmethanatoboron difluoride complexes using time-resolved absorption spectroscopies in both visible and infrared (IR) regions. While the reference system of 1,3-bis(4-methoxyphenyl)methanatoboron difluoride (2aBF2) showed strong emission in solution, the methyl-substituted derivative at the α-position of the dioxaborine ring (2amBF2) led to the very weak fluorescence in solution but strong emission in the solid state. Time-resolved visible absorption measurements revealed a peak shift and broadening of the stimulated emission in the solution of 2amBF2, owing to the rapid change of the molecular geometry. With the temporal evolution of time-resolved IR absorption signals and density functional theory (DFT) calculation of these systems, it was deduced that 2amBF2 has two stable geometries, namely, planar and bending, in the S1 state and the bending geometry in the S1 state led to rapid conversion to the S0 state. These results support the RACI model in the aggregated states, leading to the AIE properties.
- 17 November 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (47) , 32529-32538
Open AccessExcited State Dynamics of Geometrical Evolution of α-Substituted Dibenzoylmethanatoboron Difluoride Complex with Aggregation-Induced Emission Property
Organic molecules with an aggregation-induced emission (AIE) property have been attracting much attention from the viewpoint of application to solid state emissive materials. For the AIE mechanism, quantum mechanical studies proposed the restriction of the intramolecular motion (RIM) model with the contribution of the conical intersection (CI) and deduced the importance of the restricted access to a conical intersection (RACI) in the potential energy surface (PES). Although these theoretical studies have contributed to the elucidation of AIE phenomena, direct detection of the reaction dynamics is indispensable to clarify the actual PES and the deactivation mechanism. Along this line, we investigated excited state dynamics of the AIE molecule with dibenzoylmethanatoboron difluoride complexes using time-resolved absorption spectroscopies in both visible and infrared (IR) regions. While the reference system of 1,3-bis(4-methoxyphenyl)methanatoboron difluoride (2aBF2) showed strong emission in solution, the methyl-substituted derivative at the α-position of the dioxaborine ring (2amBF2) led to the very weak fluorescence in solution but strong emission in the solid state. Time-resolved visible absorption measurements revealed a peak shift and broadening of the stimulated emission in the solution of 2amBF2, owing to the rapid change of the molecular geometry. With the temporal evolution of time-resolved IR absorption signals and density functional theory (DFT) calculation of these systems, it was deduced that 2amBF2 has two stable geometries, namely, planar and bending, in the S1 state and the bending geometry in the S1 state led to rapid conversion to the S0 state. These results support the RACI model in the aggregated states, leading to the AIE properties.
- 25 August 2023
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 145 (35) , 19177-19181
Development of an Iron(II) Complex Exhibiting Thermal- and Photoinduced Double Proton-Transfer-Coupled Spin Transition in a Short Hydrogen Bond
Multiple proton transfer (PT) controllable by external stimuli plays a crucial role in fundamental chemistry, biological activity, and material science. However, in crystalline systems, controlling multiple PT, which results in a distinct protonation state, remains challenging. In this study, we developed a novel tridentate ligand and iron(II) complex with a short hydrogen bond (HB) that exhibits a PT-coupled spin transition (PCST). Single-crystal X-ray and neutron diffraction measurements revealed that the positions of the two protons in the complex can be controlled by temperature and photoirradiation based on the thermal- and photoinduced PCST. The obtained results suggest that designing molecules that form short HBs is a promising approach for developing multiple PT systems in crystals.
- 25 August 2023
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 145 (35) , 19177-19181
Development of an Iron(II) Complex Exhibiting Thermal- and Photoinduced Double Proton-Transfer-Coupled Spin Transition in a Short Hydrogen Bond
Multiple proton transfer (PT) controllable by external stimuli plays a crucial role in fundamental chemistry, biological activity, and material science. However, in crystalline systems, controlling multiple PT, which results in a distinct protonation state, remains challenging. In this study, we developed a novel tridentate ligand and iron(II) complex with a short hydrogen bond (HB) that exhibits a PT-coupled spin transition (PCST). Single-crystal X-ray and neutron diffraction measurements revealed that the positions of the two protons in the complex can be controlled by temperature and photoirradiation based on the thermal- and photoinduced PCST. The obtained results suggest that designing molecules that form short HBs is a promising approach for developing multiple PT systems in crystals.
- Open Access
- 9 June 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-9
Energy conversion and storage via photoinduced polarization change in non-ferroelectric molecular [CoGa] crystals
To alleviate the energy and environmental crisis, in the last decades, energy harvesting by utilizing optical control has emerged as a promising solution. Here we report a polar crystal that exhibits photoenergy conversion and energy storage upon light irradiation. The polar crystal consists of dinuclear [CoGa] molecules, which are oriented in a uniform direction inside the crystal lattice. Irradiation with green light induces a directional intramolecular electron transfer from the ligand to a low-spin CoIIIcentre, and the resultant light-induced high-spin CoIIexcited state is trapped at low temperature, realizing energy storage. Additionally, electric current release is observed during relaxation from the trapped light-induced metastable state to the ground state, because the intramolecular electron transfer in the relaxation process is accompanied with macroscopic polarization switching at the single-crystal level. It demonstrates that energy storage and conversion to electrical energy is realized in the [CoGa] crystals, which is different from typical polar pyroelectric compounds that exhibit the conversion of thermal energy into electricity.
- 9 June 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-9
Open AccessEnergy conversion and storage via photoinduced polarization change in non-ferroelectric molecular [CoGa] crystals
To alleviate the energy and environmental crisis, in the last decades, energy harvesting by utilizing optical control has emerged as a promising solution. Here we report a polar crystal that exhibits photoenergy conversion and energy storage upon light irradiation. The polar crystal consists of dinuclear [CoGa] molecules, which are oriented in a uniform direction inside the crystal lattice. Irradiation with green light induces a directional intramolecular electron transfer from the ligand to a low-spin CoIIIcentre, and the resultant light-induced high-spin CoIIexcited state is trapped at low temperature, realizing energy storage. Additionally, electric current release is observed during relaxation from the trapped light-induced metastable state to the ground state, because the intramolecular electron transfer in the relaxation process is accompanied with macroscopic polarization switching at the single-crystal level. It demonstrates that energy storage and conversion to electrical energy is realized in the [CoGa] crystals, which is different from typical polar pyroelectric compounds that exhibit the conversion of thermal energy into electricity.
- 23 September 2021
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 155 (12) , 125102
Visualization of intracellular lipid metabolism in brown adipocytes by time-lapse ultra-multiplex CARS microspectroscopy with an onstage incubator
We visualized a dynamic process of fatty acid uptake of brown adipocytes using a time-lapse ultra-broadband multiplex coherent anti-Stokes Raman scattering (CARS) spectroscopic imaging system with an onstage incubator. Combined with the deuterium labeling technique, the intracellular uptake of saturated fatty acids was traced up to 9 h, a substantial advance over the initial multiplex CARS system, with an analysis time of 80 min. Characteristic metabolic activities of brown adipocytes, such as resistance to lipid saturation, were elucidated, supporting the utility of the newly developed system.
- 23 September 2021
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 155 (12) , 125102
Visualization of intracellular lipid metabolism in brown adipocytes by time-lapse ultra-multiplex CARS microspectroscopy with an onstage incubator
We visualized a dynamic process of fatty acid uptake of brown adipocytes using a time-lapse ultra-broadband multiplex coherent anti-Stokes Raman scattering (CARS) spectroscopic imaging system with an onstage incubator. Combined with the deuterium labeling technique, the intracellular uptake of saturated fatty acids was traced up to 9 h, a substantial advance over the initial multiplex CARS system, with an analysis time of 80 min. Characteristic metabolic activities of brown adipocytes, such as resistance to lipid saturation, were elucidated, supporting the utility of the newly developed system.
- Open Access
- 4 October 2019
- Published by Springer Nature in Communications Chemistry
- Vol. 2 (1) , 1-10
Comprehensive modeling of bloodstain aging by multivariate Raman spectral resolution with kinetics
Blood, as a cardinal biological system, is a challenging target for biochemical characterization because of sample complexity and a lack of analytical approaches. To reveal and evaluate aging process of blood compositions is an unexplored issue in forensic analysis, which is useful to elucidate the details of a crime. Here we demonstrate a spectral deconvolution model of near-infrared Raman spectra of bloodstain to comprehensively describe the aging process based on the chemical mechanism, particularly the kinetics. The bloodstain spectra monitored over several months at different temperatures are decomposed into significant spectral components by multivariate calculation. The kinetic schemes of the spectral components are explored and subsequently incorporated into the developed algorithm for the optimal spectral resolution. Consequently, the index of bloodstain aging is proposed, which can be used under different experimental conditions. This work provides a novel perspective on the chemical mechanisms in bloodstain aging and facilitates forensic applications.
- 4 October 2019
- Published by Springer Nature in Communications Chemistry
- Vol. 2 (1) , 1-10
Open AccessComprehensive modeling of bloodstain aging by multivariate Raman spectral resolution with kinetics
Blood, as a cardinal biological system, is a challenging target for biochemical characterization because of sample complexity and a lack of analytical approaches. To reveal and evaluate aging process of blood compositions is an unexplored issue in forensic analysis, which is useful to elucidate the details of a crime. Here we demonstrate a spectral deconvolution model of near-infrared Raman spectra of bloodstain to comprehensively describe the aging process based on the chemical mechanism, particularly the kinetics. The bloodstain spectra monitored over several months at different temperatures are decomposed into significant spectral components by multivariate calculation. The kinetic schemes of the spectral components are explored and subsequently incorporated into the developed algorithm for the optimal spectral resolution. Consequently, the index of bloodstain aging is proposed, which can be used under different experimental conditions. This work provides a novel perspective on the chemical mechanisms in bloodstain aging and facilitates forensic applications.
- Open Access
- 12 August 2019
- Published by Wiley in Journal of Biophotonics
- Vol. 12 (12) , e201960028
Parallelized shifted‐excitation Raman difference spectroscopy for fluorescence rejection in a temporary varying system
A fluorescence background is one of the common interference factors of the Raman spectroscopic analysis in the biology field. Shifted‐excitation Raman difference spectroscopy (SERDS), in which a slow (typically 1 Hz) modulation to excitation wavelength is coupled with a sequential acquisition of alternating shifted‐excitation spectra, has been used to separate Raman scattering from excitation‐shift insensitive background. This sequential method is susceptible to spectral change and thus is limited only to stable samples. We incorporated a fast laser modulation (200 Hz) and a mechanical streak camera into SERDS to effectively parallelize the SERDS measurement in a single exposure. The developed system expands the scope of SERDS to include temporary varying system. The proof of concept is demonstrated using highly fluorescent samples, including living algae. Quantitative performance in fluorescence rejection and the robustness of the method to the dynamic spectral change during the measurement are manifested.
- 12 August 2019
- Published by Wiley in Journal of Biophotonics
- Vol. 12 (12) , e201960028
Open AccessParallelized shifted‐excitation Raman difference spectroscopy for fluorescence rejection in a temporary varying system
A fluorescence background is one of the common interference factors of the Raman spectroscopic analysis in the biology field. Shifted‐excitation Raman difference spectroscopy (SERDS), in which a slow (typically 1 Hz) modulation to excitation wavelength is coupled with a sequential acquisition of alternating shifted‐excitation spectra, has been used to separate Raman scattering from excitation‐shift insensitive background. This sequential method is susceptible to spectral change and thus is limited only to stable samples. We incorporated a fast laser modulation (200 Hz) and a mechanical streak camera into SERDS to effectively parallelize the SERDS measurement in a single exposure. The developed system expands the scope of SERDS to include temporary varying system. The proof of concept is demonstrated using highly fluorescent samples, including living algae. Quantitative performance in fluorescence rejection and the robustness of the method to the dynamic spectral change during the measurement are manifested.
- 8 November 2018
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 140 (48) , 16610-16614
Preferential Photoreaction in a Porous Crystal, Metal–Macrocycle Framework: PdII-Mediated Olefin Migration over [2+2] Cycloaddition
A nano-sized confined space with well-defined functional surfaces has great potential to control the efficiency and selectivity of catalytic reactions. Herein we report that a 1,6-diene, which normally forms an intramolecular [2+2] cycloadduct under photo-irradiation, preferentially undergoes a photo-induced olefin migration in a porous crystal, metal–macrocycle framework (MMF), and alternatively [2+2] cycloaddition is completely inhibited in the confined space. A plausible reaction mechanism for olefin migration triggered by the photo-induced dissociation of the Pd-Cl bond is suggested based on UV-vis diffuse reflectance spectroscopy, single-crystal XRD, and MS-CASPT2 calculation. The substrate scope of the photo-induced olefin migration in MMF was also examined using substituted allylbenzene derivatives.
- 8 November 2018
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 140 (48) , 16610-16614
Preferential Photoreaction in a Porous Crystal, Metal–Macrocycle Framework: PdII-Mediated Olefin Migration over [2+2] Cycloaddition
A nano-sized confined space with well-defined functional surfaces has great potential to control the efficiency and selectivity of catalytic reactions. Herein we report that a 1,6-diene, which normally forms an intramolecular [2+2] cycloadduct under photo-irradiation, preferentially undergoes a photo-induced olefin migration in a porous crystal, metal–macrocycle framework (MMF), and alternatively [2+2] cycloaddition is completely inhibited in the confined space. A plausible reaction mechanism for olefin migration triggered by the photo-induced dissociation of the Pd-Cl bond is suggested based on UV-vis diffuse reflectance spectroscopy, single-crystal XRD, and MS-CASPT2 calculation. The substrate scope of the photo-induced olefin migration in MMF was also examined using substituted allylbenzene derivatives.
- 26 May 2017
- Published by Wiley in Chemistry – A European Journal
- Vol. 23 (35) , 8443-8449
Liquid/Liquid Interfacial Synthesis of a Click Nanosheet
A liquid/liquid interfacial synthesis is employed, for the first time, to synthesize a covalent two‐dimensional polymer nanosheet. Copper‐catalyzed azide–alkyne cycloaddition (CuAAC) between a three‐way terminal alkyne and azide at a water/dichloromethane interface generates a 1,2,3‐triazole‐linked nanosheet. The resultant nanosheet, with a flat and smooth texture, has a maximum domain size of 20 μm and minimum thickness of 5.3 nm. The starting monomers in the organic phase and the copper catalyst in the aqueous phase can only meet at the liquid/liquid interface as a two‐dimensional reaction space; this allows them to form the two‐dimensional polymer. The robust triazole linkage generated by irreversible covalent‐bond formation allows the nanosheet to resist hydrolysis under both acidic and alkaline conditions, and to endure pyrolysis up to more than 300 °C. The coordination ability of the triazolyl group enables the nanosheet to act as a reservoir for metal ions, with an affinity order of Pd2+>Au3+>Cu2+.
- 26 May 2017
- Published by Wiley in Chemistry – A European Journal
- Vol. 23 (35) , 8443-8449
Liquid/Liquid Interfacial Synthesis of a Click Nanosheet
A liquid/liquid interfacial synthesis is employed, for the first time, to synthesize a covalent two‐dimensional polymer nanosheet. Copper‐catalyzed azide–alkyne cycloaddition (CuAAC) between a three‐way terminal alkyne and azide at a water/dichloromethane interface generates a 1,2,3‐triazole‐linked nanosheet. The resultant nanosheet, with a flat and smooth texture, has a maximum domain size of 20 μm and minimum thickness of 5.3 nm. The starting monomers in the organic phase and the copper catalyst in the aqueous phase can only meet at the liquid/liquid interface as a two‐dimensional reaction space; this allows them to form the two‐dimensional polymer. The robust triazole linkage generated by irreversible covalent‐bond formation allows the nanosheet to resist hydrolysis under both acidic and alkaline conditions, and to endure pyrolysis up to more than 300 °C. The coordination ability of the triazolyl group enables the nanosheet to act as a reservoir for metal ions, with an affinity order of Pd2+>Au3+>Cu2+.