Evan Lowry
Evan Lowry has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
Eric Rodano
2 shared publications- Gautham Krishnamoorthy
Department of Chemical Engineering, University of North Dakota, UPSON II Room 365, 241 Centennial Drive, Grand Forks, ND 58202-7101, USA
2 shared publications Jared Lusk
2 shared publicationsMohammad Piri
College of Engineering and Applied Sciences , University of Wyoming , Laramie , Wyoming 82071 , United States
2 shared publications- Robert D. Barnum2 shared publications
Yanxiao Yuan
2 shared publications
Latest Publications
- Open Access
- 15 September 2023
- Published by Open Engineering Inc in engrXiv
Experimental and Pilot Investigation of The Impact of Drag Reducing Agents on Filter Performance
Drag reducing agents (DRA) are commonly used chemicals in the process and pipeline industry. The unique properties of DRA allow for the reduction in friction and turbulence at the pipe wall, which reduces pumping and transportation costs for both raw crude and refined products. Most of the DRA that is injected into product pipelines is assumed to be sheared into small molecules via turbulence induced polymer chain scission by the time it reaches its destination which eventually renders it ineffective for drag reduction. Although this may sometimes be the case, often unsheared or partially sheared DRA persists in hydrocarbon products which may cause problems for end-users. DRA has been cited as the culprit for issues with clogging of fuel injectors and fuel filters. Problems of this nature have been reported by end-users of diesel and aviation fuel products. As a result, it is often in the best interest of refiners and fuel wholesalers to ensure that their products have minimal to no persisting DRA contamination prior to sale. Filtration is one viable method of lowering the DRA concentrations in fuel products, however the impacts of macro-molecular DRA on filter life and performance is not well understood. To this end, a study was conducted to investigate the impact of hydrocarbon-based DRA on the filtration systems. A method to characterize the level of DRA contamination in product fuel, the polymer filtration index (PFI), is presented and utilized to benchmark the performance of a media filter. Impacts of DRA on filter life and removal efficiency are discussed from an industrial perspective. In light of the findings, a discussion on filtration as a method for the removal of DRA from diesel fuels is presented.
- 15 September 2023
- Published by Open Engineering Inc in engrXiv
Open AccessExperimental and Pilot Investigation of The Impact of Drag Reducing Agents on Filter Performance
Drag reducing agents (DRA) are commonly used chemicals in the process and pipeline industry. The unique properties of DRA allow for the reduction in friction and turbulence at the pipe wall, which reduces pumping and transportation costs for both raw crude and refined products. Most of the DRA that is injected into product pipelines is assumed to be sheared into small molecules via turbulence induced polymer chain scission by the time it reaches its destination which eventually renders it ineffective for drag reduction. Although this may sometimes be the case, often unsheared or partially sheared DRA persists in hydrocarbon products which may cause problems for end-users. DRA has been cited as the culprit for issues with clogging of fuel injectors and fuel filters. Problems of this nature have been reported by end-users of diesel and aviation fuel products. As a result, it is often in the best interest of refiners and fuel wholesalers to ensure that their products have minimal to no persisting DRA contamination prior to sale. Filtration is one viable method of lowering the DRA concentrations in fuel products, however the impacts of macro-molecular DRA on filter life and performance is not well understood. To this end, a study was conducted to investigate the impact of hydrocarbon-based DRA on the filtration systems. A method to characterize the level of DRA contamination in product fuel, the polymer filtration index (PFI), is presented and utilized to benchmark the performance of a media filter. Impacts of DRA on filter life and removal efficiency are discussed from an industrial perspective. In light of the findings, a discussion on filtration as a method for the removal of DRA from diesel fuels is presented.
- Open Access
- 26 June 2023
- Published by Elsevier in Case Studies in Chemical and Environmental Engineering
- Vol. 8
Experimental and pilot investigation of the impact of drag reducing agents on filter performance
- 26 June 2023
- Published by Elsevier in Case Studies in Chemical and Environmental Engineering
- Vol. 8
Open AccessExperimental and pilot investigation of the impact of drag reducing agents on filter performance
- 27 May 2023
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 195, 601-612
Two-phase pressure loss correlation for co-current flow in corrugated plate static mixers and structured packing
- 27 May 2023
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 195, 601-612
Two-phase pressure loss correlation for co-current flow in corrugated plate static mixers and structured packing
- 10 January 2023
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 101 (7) , 3821-3839
An improved correlation for dry pressure losses across static mixers at high Reynolds numbers
Corrugated (SMV‐style) static mixers are industrially important for process intensification and can promote gas–liquid mass transfer in processes such as sour gas sweetening. Current correlations for pressure loss are limited to Reynolds numbers (Re) below 40 000, far below the ranges encountered in natural gas systems (105 < Re < 107). An experimental and numerical study of pressure drop across multiple corrugated mixers in the range of 104 < Re 5encompassing different configurations (aligned, rotated), pipe diameters (1–4 in.), and sand grain surface roughness values (10–5000 μm) is reported here. Our previous correlation for pressure loss across a single corrugated element is shown to be extendable to multiple corrugated mixing elements. Through the inclusion of mixer tortuosity (τ), porosity (ε), and macro‐scale (geometric) wall roughness (e), the correlation also matches historical pressure drop data (at differentτ,ε) reported in literature, thereby demonstrating the utility of these variables as parameters that can help optimize mixer performance. Experiments and computational fluid dynamics (CFD) modelling revealed that the rotated configuration increased the residence time by up to 13% in comparison to the aligned configuration. This may have implications on the selective absorption of sour gas components that are based on fast kinetics. In addition, the role of wall roughness (both pipe housing and mixer) was demonstrated to be significant in this study (accounting for 55% of the pressure losses) and must be accurately accounted for when scaling laboratory measurements.
- 10 January 2023
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 101 (7) , 3821-3839
An improved correlation for dry pressure losses across static mixers at high Reynolds numbers
Corrugated (SMV‐style) static mixers are industrially important for process intensification and can promote gas–liquid mass transfer in processes such as sour gas sweetening. Current correlations for pressure loss are limited to Reynolds numbers (Re) below 40 000, far below the ranges encountered in natural gas systems (105 < Re < 107). An experimental and numerical study of pressure drop across multiple corrugated mixers in the range of 104 < Re 5encompassing different configurations (aligned, rotated), pipe diameters (1–4 in.), and sand grain surface roughness values (10–5000 μm) is reported here. Our previous correlation for pressure loss across a single corrugated element is shown to be extendable to multiple corrugated mixing elements. Through the inclusion of mixer tortuosity (τ), porosity (ε), and macro‐scale (geometric) wall roughness (e), the correlation also matches historical pressure drop data (at differentτ,ε) reported in literature, thereby demonstrating the utility of these variables as parameters that can help optimize mixer performance. Experiments and computational fluid dynamics (CFD) modelling revealed that the rotated configuration increased the residence time by up to 13% in comparison to the aligned configuration. This may have implications on the selective absorption of sour gas components that are based on fast kinetics. In addition, the role of wall roughness (both pipe housing and mixer) was demonstrated to be significant in this study (accounting for 55% of the pressure losses) and must be accurately accounted for when scaling laboratory measurements.
- 7 November 2019
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 124 (11) , 10893-10915
Estimation of Capillary Pressure in Unconventional Reservoirs Using Thermodynamic Analysis of Pore Images
Unconventional reservoirs comprise a growing portion of producible reserves due to increasing knowledge of their nature as well as significant advances in production technology. The development of advanced pore‐scale modeling techniques presents potential for better estimation of reservoir flow characteristics including relative permeability, saturation distributions, and capillary pressure. Although pore‐scale network models take into account the pore throat connections and the appropriate fluid properties, highly simplified pore cross‐sectional shapes are still employed when estimating the threshold capillary pressure for fluid‐fluid displacements in each pore element. As a result, there is a growing need for more realistic threshold capillary pressure estimates generated using pore geometries that honor the real pore topology. To this end, a semianalytical model is presented that allows the prediction of threshold capillary pressure as well as the capillary pressure versus saturation relationship for piston‐like fluid displacements using images of unconventional reservoir rock samples. The model was validated on three different idealized pore geometries and compared against available analytical solutions, resulting in an error of less than 1% for all cases. The model was compared to experimental data using fluid occupancy maps obtained using an X‐ray nano‐CT scanner during an oil imbibition sequence into a miniature reservoir shale sample. The capillary pressure versus wetting phase saturation relationship was also determined for a 2‐D focused ion beam scanning electron microscopy image slice. The presented model shows promise for enabling more advanced pore‐scale modeling of shale rock.
- 7 November 2019
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 124 (11) , 10893-10915
Estimation of Capillary Pressure in Unconventional Reservoirs Using Thermodynamic Analysis of Pore Images
Unconventional reservoirs comprise a growing portion of producible reserves due to increasing knowledge of their nature as well as significant advances in production technology. The development of advanced pore‐scale modeling techniques presents potential for better estimation of reservoir flow characteristics including relative permeability, saturation distributions, and capillary pressure. Although pore‐scale network models take into account the pore throat connections and the appropriate fluid properties, highly simplified pore cross‐sectional shapes are still employed when estimating the threshold capillary pressure for fluid‐fluid displacements in each pore element. As a result, there is a growing need for more realistic threshold capillary pressure estimates generated using pore geometries that honor the real pore topology. To this end, a semianalytical model is presented that allows the prediction of threshold capillary pressure as well as the capillary pressure versus saturation relationship for piston‐like fluid displacements using images of unconventional reservoir rock samples. The model was validated on three different idealized pore geometries and compared against available analytical solutions, resulting in an error of less than 1% for all cases. The model was compared to experimental data using fluid occupancy maps obtained using an X‐ray nano‐CT scanner during an oil imbibition sequence into a miniature reservoir shale sample. The capillary pressure versus wetting phase saturation relationship was also determined for a 2‐D focused ion beam scanning electron microscopy image slice. The presented model shows promise for enabling more advanced pore‐scale modeling of shale rock.
- 14 July 2018
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 34 (32) , 9349-9358
Effect of Surface Chemistry on Confined Phase Behavior in Nanoporous Media: An Experimental and Molecular Modeling Study
It is well accepted that nanopore size is a controlling parameter in determining the phase behavior of confined adsorbate molecules. Despite this knowledge, the quantitative effect of surface chemistry on the confined phase behavior is a factor that remains obfuscated. Obtaining a complete understanding of the variables controlling confined phase behavior is a critical step in developing more complete equations of state for predictive modeling. To this end, a combined experimental and molecular modeling study was conducted to investigate the effects of surface chemistry and wetting on the confined phase behavior of propane and n-butane in modified and unmodified silica MCM-41. Isotherms were measured in four types of silica MCM-41 modified with varying sizes of alkyl groups to determine the effects of increasing surface modification. Results showed that increased pore surface coverage of carbon resulted in a notable change in the capillary condensation pressures, adsorption enthalpy, and confined critical temperature of the adsorbate. Correlations between the surface coverage of carbon and the confined critical temperature were presented and supported by thermodynamic arguments. The primary conclusions were partially supported by hybrid molecular dynamics-Monte Carlo simulations of propane adsorption in models of the four types of experimental adsorbents. Several differences were noted and explained between the experimental and modeling results. Energetic heterogeneity on the surface of the modified MCM-41 adsorbents as well as differences in adsorbate entropy induced by surface features and chemistry were suggested as primary driving factors for the observed trends. The results of this work have direct implications for improving understanding of confined phase behavior in materials of varying surface chemistry.
- 14 July 2018
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 34 (32) , 9349-9358
Effect of Surface Chemistry on Confined Phase Behavior in Nanoporous Media: An Experimental and Molecular Modeling Study
It is well accepted that nanopore size is a controlling parameter in determining the phase behavior of confined adsorbate molecules. Despite this knowledge, the quantitative effect of surface chemistry on the confined phase behavior is a factor that remains obfuscated. Obtaining a complete understanding of the variables controlling confined phase behavior is a critical step in developing more complete equations of state for predictive modeling. To this end, a combined experimental and molecular modeling study was conducted to investigate the effects of surface chemistry and wetting on the confined phase behavior of propane and n-butane in modified and unmodified silica MCM-41. Isotherms were measured in four types of silica MCM-41 modified with varying sizes of alkyl groups to determine the effects of increasing surface modification. Results showed that increased pore surface coverage of carbon resulted in a notable change in the capillary condensation pressures, adsorption enthalpy, and confined critical temperature of the adsorbate. Correlations between the surface coverage of carbon and the confined critical temperature were presented and supported by thermodynamic arguments. The primary conclusions were partially supported by hybrid molecular dynamics-Monte Carlo simulations of propane adsorption in models of the four types of experimental adsorbents. Several differences were noted and explained between the experimental and modeling results. Energetic heterogeneity on the surface of the modified MCM-41 adsorbents as well as differences in adsorbate entropy induced by surface features and chemistry were suggested as primary driving factors for the observed trends. The results of this work have direct implications for improving understanding of confined phase behavior in materials of varying surface chemistry.
- 1 June 2018
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 263, 53-61
Effects of chemical and physical heterogeneity on confined phase behavior in nanopores
- 1 June 2018
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 263, 53-61
Effects of chemical and physical heterogeneity on confined phase behavior in nanopores
- 12 August 2016
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 30 (9) , 7187-7195
Novel Dispersant for Formation Damage Prevention in CO2: A Molecular Dynamics Study
- 12 August 2016
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 30 (9) , 7187-7195
Novel Dispersant for Formation Damage Prevention in CO2: A Molecular Dynamics Study