Shiqi Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shiqi Zhou has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- José Ramón Solana
Department of Applied Physics, University of Cantabria, Santander, Spain
7 shared publications Andrej Jamnik
Faculty of Chemistry and Chemical Technology, University of Ljubljana, Aškerčeva 5, SI-1001 Ljubljana, Slovenia
5 shared publicationsG. Zhang
Central South University
3 shared publicationsYilihaer Aisan
3 shared publicationsHira Hameed
2 shared publications- Songming Yang
School of Physics and Electronics, Central South University, Changsha 410083, China
2 shared publications
Latest Publications
- 26 October 2026
- Published by World Scientific Pub Co Pte Ltd in International Journal of Modern Physics B
- Vol. 40 (30)
Intrinsic limits of ion enrichment and selectivity in charged nanopores: Insights from bulk-validated classical density functional theory with experimentally calibrated ion diameters
Understanding ion enrichment and selectivity in charged nanopores is essential for nanopore-based separation, desalination and sensing technologies. Here, we employ classical density functional theory (cDFT) with experimentally calibrated effective ion diameters to investigate equilibrium ion distributions in charged cylindrical nanopores. The cDFT framework is first validated against molecular dynamics simulations for bulk primitive-model electrolytes over different ion-sized ratios, concentrations and temperatures. We then examine LiCl and its mixtures with NaCl and KCl over pore diameters of 0.8–6[Formula: see text]nm, surface charge densities of [Formula: see text]0.01[Formula: see text]C/m 2 to [Formula: see text]0.1[Formula: see text]C/m 2 and bulk concentrations of 0.001–1.5[Formula: see text]M. The results show that Li[Formula: see text]/Cl − equilibrium enrichment selectivity can become extremely large under strong surface charge and low ionic strength because of near-complete coion exclusion. In contrast, Li[Formula: see text]/Na[Formula: see text] and Li[Formula: see text]/K[Formula: see text] selectivities remain modest, indicating the intrinsic limit of cation–cation discrimination achievable by electrostatic and steric effects alone. We further show that cation selectivity is governed by a competition between electrostatic localization near the charged wall and entropic accessibility in the pore interior, leading to selectivity reversal under extreme confinement and high concentrations. These findings establish quantitative design principles for charged nanopores and clarify the additional physical or chemical mechanisms required to approach biological-level cation selectivity.
- 26 October 2026
- Published by World Scientific Pub Co Pte Ltd in International Journal of Modern Physics B
- Vol. 40 (30)
Intrinsic limits of ion enrichment and selectivity in charged nanopores: Insights from bulk-validated classical density functional theory with experimentally calibrated ion diameters
Understanding ion enrichment and selectivity in charged nanopores is essential for nanopore-based separation, desalination and sensing technologies. Here, we employ classical density functional theory (cDFT) with experimentally calibrated effective ion diameters to investigate equilibrium ion distributions in charged cylindrical nanopores. The cDFT framework is first validated against molecular dynamics simulations for bulk primitive-model electrolytes over different ion-sized ratios, concentrations and temperatures. We then examine LiCl and its mixtures with NaCl and KCl over pore diameters of 0.8–6[Formula: see text]nm, surface charge densities of [Formula: see text]0.01[Formula: see text]C/m 2 to [Formula: see text]0.1[Formula: see text]C/m 2 and bulk concentrations of 0.001–1.5[Formula: see text]M. The results show that Li[Formula: see text]/Cl − equilibrium enrichment selectivity can become extremely large under strong surface charge and low ionic strength because of near-complete coion exclusion. In contrast, Li[Formula: see text]/Na[Formula: see text] and Li[Formula: see text]/K[Formula: see text] selectivities remain modest, indicating the intrinsic limit of cation–cation discrimination achievable by electrostatic and steric effects alone. We further show that cation selectivity is governed by a competition between electrostatic localization near the charged wall and entropic accessibility in the pore interior, leading to selectivity reversal under extreme confinement and high concentrations. These findings establish quantitative design principles for charged nanopores and clarify the additional physical or chemical mechanisms required to approach biological-level cation selectivity.
- Open Access
- 15 October 2026
- Published by Elsevier in SSRN Electronic Journal
Concentration-robust quantum-capacitance engineering of substitutionally doped 2D GaN for supercapacitor electrodes: A first-principles study
Quantum capacitance (CQ) can limit the total capacitance of low-dimensional electric-double-layer capacitor electrodes, but a large peak CQ at one dopant concentration or bias does not by itself establish a robust charge-storage advantage. Here, density functional theory is used to screen pristine and Be-, Mg-, Sc-, Cr-, Mn-, Ni-, Cu-, Zn-, Ta-, and Pt-substituted 2D-GaN monolayers in 8-, 18-, and 32-atom periodic supercells. The central question is whether a dopant-induced enhancement survives reduced periodic dopant density and loss of bias re-optimization, rather than appearing only as a large maximum in the most concentrated model. In addition to peak CQ, fixed-potential and full-window metrics are derived from the same CQ–V and QSC–V data to distinguish peak-only enhancement from concentration- and bias-robust behavior. Mg and Sc give the largest peak CQ values in the 8-atom models, 440.59 and 431.74 µF cm⁻², respectively. On enlarging the supercell, however, Sc is the only dopant that remains above pristine GaN in the 32-atom model for all three normalized criteria: Gpeak = 1.13, Gfix = 1.15, and Gwin = 1.16. Mg and Zn retain slightly higher peak CQ than pristine GaN (Gpeak = 1.04 and 1.06) but fall below pristine under the fixed-potential and window-averaged comparisons. DOS/PDOS analysis links these trends to the energetic alignment and hybridization of dopant-induced states rather than to static charge transfer alone, while selected HSE06 calculations preserve the qualitative high/low-CQ ordering. The results identify Sc substitution as the most concentration-robust electronic-structure route among the tested dopants and show why peak CQ alone can overstate electrode benefit.
- 15 October 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessConcentration-robust quantum-capacitance engineering of substitutionally doped 2D GaN for supercapacitor electrodes: A first-principles study
Quantum capacitance (CQ) can limit the total capacitance of low-dimensional electric-double-layer capacitor electrodes, but a large peak CQ at one dopant concentration or bias does not by itself establish a robust charge-storage advantage. Here, density functional theory is used to screen pristine and Be-, Mg-, Sc-, Cr-, Mn-, Ni-, Cu-, Zn-, Ta-, and Pt-substituted 2D-GaN monolayers in 8-, 18-, and 32-atom periodic supercells. The central question is whether a dopant-induced enhancement survives reduced periodic dopant density and loss of bias re-optimization, rather than appearing only as a large maximum in the most concentrated model. In addition to peak CQ, fixed-potential and full-window metrics are derived from the same CQ–V and QSC–V data to distinguish peak-only enhancement from concentration- and bias-robust behavior. Mg and Sc give the largest peak CQ values in the 8-atom models, 440.59 and 431.74 µF cm⁻², respectively. On enlarging the supercell, however, Sc is the only dopant that remains above pristine GaN in the 32-atom model for all three normalized criteria: Gpeak = 1.13, Gfix = 1.15, and Gwin = 1.16. Mg and Zn retain slightly higher peak CQ than pristine GaN (Gpeak = 1.04 and 1.06) but fall below pristine under the fixed-potential and window-averaged comparisons. DOS/PDOS analysis links these trends to the energetic alignment and hybridization of dopant-induced states rather than to static charge transfer alone, while selected HSE06 calculations preserve the qualitative high/low-CQ ordering. The results identify Sc substitution as the most concentration-robust electronic-structure route among the tested dopants and show why peak CQ alone can overstate electrode benefit.
- Open Access
- 25 March 2026
- Published by Elsevier in SSRN Electronic Journal
Unlocking the Hidden Potential of 2D-ZnO: A 20-Fold Quantum Capacitance Enhancement over Graphene via Strategic Doping
Quantum capacitance (CQ) is a fundamental bottleneck for electric double layer capacitors (EDLCs) based on two-dimensional (2D) electrodes. However, the CQ of 2D-ZnO monolayers and its dopant-tunable enhancement mechanisms remain insufficiently understood. Here, density functional theory (DFT) calculations are performed for pure and substitutionally doped 2D-ZnO using 8-, 18-, and 32-atom structures, where a single dopant atom replaces a Zn site to systematically control the doping concentration (12.5%, 5.5%, and 3.1%) across ten dopants (Be, Mg, Co, Cr, Cu, Pt, Sc, Tc, Ti, and V). Pure 2D-ZnO exhibits an intrinsic CQ of 362.79 μF/cm2, which is a 20-fold enhancement compared to pure graphene. The optimal case is obtained in the 8-atom (12.5%) configuration, where Be, Mg, Cu, and Pt deliver markedly enhanced CQ values of 490.93 μF/cm2, 457.96 μF/cm2, 434.57 μF/cm2, and 425.51 μF/cm2, respectively. Density of states, partial density of states analysis and Hirshfeld charge partitioning indicate that the CQ enhancement is primarily governed by dopant induced electronic structure engineering especially hybridized d-p states near the Fermi-level and band-edge modulation rather than simple charge transfer. Spin polarized DFT calculations confirm the magnetic moment induced by transition metals (TMs), and all doped systems show negative formation energy, suggesting thermodynamic feasibility.
- 25 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessUnlocking the Hidden Potential of 2D-ZnO: A 20-Fold Quantum Capacitance Enhancement over Graphene via Strategic Doping
Quantum capacitance (CQ) is a fundamental bottleneck for electric double layer capacitors (EDLCs) based on two-dimensional (2D) electrodes. However, the CQ of 2D-ZnO monolayers and its dopant-tunable enhancement mechanisms remain insufficiently understood. Here, density functional theory (DFT) calculations are performed for pure and substitutionally doped 2D-ZnO using 8-, 18-, and 32-atom structures, where a single dopant atom replaces a Zn site to systematically control the doping concentration (12.5%, 5.5%, and 3.1%) across ten dopants (Be, Mg, Co, Cr, Cu, Pt, Sc, Tc, Ti, and V). Pure 2D-ZnO exhibits an intrinsic CQ of 362.79 μF/cm2, which is a 20-fold enhancement compared to pure graphene. The optimal case is obtained in the 8-atom (12.5%) configuration, where Be, Mg, Cu, and Pt deliver markedly enhanced CQ values of 490.93 μF/cm2, 457.96 μF/cm2, 434.57 μF/cm2, and 425.51 μF/cm2, respectively. Density of states, partial density of states analysis and Hirshfeld charge partitioning indicate that the CQ enhancement is primarily governed by dopant induced electronic structure engineering especially hybridized d-p states near the Fermi-level and band-edge modulation rather than simple charge transfer. Spin polarized DFT calculations confirm the magnetic moment induced by transition metals (TMs), and all doped systems show negative formation energy, suggesting thermodynamic feasibility.
- 22 May 2025
- Published by World Scientific Pub Co Pte Ltd in International Journal of Modern Physics B
- Vol. 39 (21)
Anisotropic entropy-driven potential
This study investigates the Entropy-Driven Potential (EDP) between two infinitely long, parallel semi-cylindrical particles immersed in a hard-sphere solvent. The research focuses on how the mutual orientations of the particles and the bulk solvent density influence the EDP curves. Using the classical density functional theory, we calculated the potential of mean force to understand the entropic interactions. Since the system considered in this study excludes energetic interactions, the derived potential of mean force directly corresponds to the EDP. The key results reveal that in the EDP curve, the depth and height of attractive wells and repulsive barriers, their positions, as well as patterns in the EDP behavior, vary significantly with orientation and solvent density. Notably, some configurations exhibit purely repulsive interactions due to specific particle alignments. The study identifies three dominant mechanisms driving the EDP: (1) overlap of exclusion zones, which increases entropy and results in attraction, (2) adsorption–desorption of solvent particles on particle surfaces, which decreases entropy and contributes to repulsion and (3) collision-induced forces that generate attractive potentials as particles approach each other. These findings provide new insights into anisotropic entropic interactions, which are critical for designing advanced materials and technologies in fields like nanotechnology, biomedicine and colloidal science. The research highlights the novelty of studying the anisotropic nature of the excluded volume and their potential to inform the development of materials with tunable properties.
- 22 May 2025
- Published by World Scientific Pub Co Pte Ltd in International Journal of Modern Physics B
- Vol. 39 (21)
Anisotropic entropy-driven potential
This study investigates the Entropy-Driven Potential (EDP) between two infinitely long, parallel semi-cylindrical particles immersed in a hard-sphere solvent. The research focuses on how the mutual orientations of the particles and the bulk solvent density influence the EDP curves. Using the classical density functional theory, we calculated the potential of mean force to understand the entropic interactions. Since the system considered in this study excludes energetic interactions, the derived potential of mean force directly corresponds to the EDP. The key results reveal that in the EDP curve, the depth and height of attractive wells and repulsive barriers, their positions, as well as patterns in the EDP behavior, vary significantly with orientation and solvent density. Notably, some configurations exhibit purely repulsive interactions due to specific particle alignments. The study identifies three dominant mechanisms driving the EDP: (1) overlap of exclusion zones, which increases entropy and results in attraction, (2) adsorption–desorption of solvent particles on particle surfaces, which decreases entropy and contributes to repulsion and (3) collision-induced forces that generate attractive potentials as particles approach each other. These findings provide new insights into anisotropic entropic interactions, which are critical for designing advanced materials and technologies in fields like nanotechnology, biomedicine and colloidal science. The research highlights the novelty of studying the anisotropic nature of the excluded volume and their potential to inform the development of materials with tunable properties.
- 28 February 2025
- Published by World Scientific Pub Co Pte Ltd in International Journal of Modern Physics B
- Vol. 39 (18)
Impact of density fluctuations on solvent-induced interaction: A combined theoretical and simulation study
This study investigates solvent-induced interactions between two large particles immersed in a Lennard-Jones (LJ) solvent bath using molecular dynamics simulations and classical density functional theory. The LJ energy parameter between the large particles and the solvent particles is 1.439 times that of solvent–solvent interactions. The predictions of excess mean force align well under supercritical conditions with moderate or lower bulk solvent densities and moderate temperatures. However, deviations arise at high-density and high-temperature conditions, attributed to the reflective boundary conditions used in the theoretical calculations, which inadequately capture solid-like ordering effects. The study further explores the temperature dependence of the excess potential of mean force (PMF) at fixed reduced bulk densities ranging from 0.1 to 0.6 (in increments of 0.1). Within the gas density range, the excess PMF exhibits attractive behavior, with potential depths reaching up to 30 times the solvent particle LJ energy parameter as the gas density decreases and the temperature approaches saturation. Conversely, in the solvent liquid density range, the excess PMF remains repulsive, even near the saturation temperature. As the temperature increases, the excess PMF shifts upward, becoming less attractive or more repulsive, with the gas density range showing greater temperature sensitivity compared to the liquid density range. The substantial deepening of the potential well in the excess PMF leads to a significant increase in the critical temperature. Consequently, under a fixed system temperature, the working fluid operates in subcritical conditions. This behavior opens avenues for various phenomena, including wetting transition, enhanced adsorption and modified self-assembly, which can be exploited to achieve specific technical objectives.
- 28 February 2025
- Published by World Scientific Pub Co Pte Ltd in International Journal of Modern Physics B
- Vol. 39 (18)
Impact of density fluctuations on solvent-induced interaction: A combined theoretical and simulation study
This study investigates solvent-induced interactions between two large particles immersed in a Lennard-Jones (LJ) solvent bath using molecular dynamics simulations and classical density functional theory. The LJ energy parameter between the large particles and the solvent particles is 1.439 times that of solvent–solvent interactions. The predictions of excess mean force align well under supercritical conditions with moderate or lower bulk solvent densities and moderate temperatures. However, deviations arise at high-density and high-temperature conditions, attributed to the reflective boundary conditions used in the theoretical calculations, which inadequately capture solid-like ordering effects. The study further explores the temperature dependence of the excess potential of mean force (PMF) at fixed reduced bulk densities ranging from 0.1 to 0.6 (in increments of 0.1). Within the gas density range, the excess PMF exhibits attractive behavior, with potential depths reaching up to 30 times the solvent particle LJ energy parameter as the gas density decreases and the temperature approaches saturation. Conversely, in the solvent liquid density range, the excess PMF remains repulsive, even near the saturation temperature. As the temperature increases, the excess PMF shifts upward, becoming less attractive or more repulsive, with the gas density range showing greater temperature sensitivity compared to the liquid density range. The substantial deepening of the potential well in the excess PMF leads to a significant increase in the critical temperature. Consequently, under a fixed system temperature, the working fluid operates in subcritical conditions. This behavior opens avenues for various phenomena, including wetting transition, enhanced adsorption and modified self-assembly, which can be exploited to achieve specific technical objectives.
- Open Access
- 24 December 2024
- Published by MDPI AG in Nanomaterials
- Vol. 15 (1) , 1
RETRACTED: Yang et al. Capacitive Behavior of Aqueous Electrical Double Layer Based on Dipole Dimer Water Model. Nanomaterials 2023, 13, 16
The journal retracts the article titled “Capacitive Behavior of Aqueous Electrical Double Layer Based on Dipole Dimer Water Model”
- 24 December 2024
- Published by MDPI AG in Nanomaterials
- Vol. 15 (1) , 1
Open AccessRETRACTED: Yang et al. Capacitive Behavior of Aqueous Electrical Double Layer Based on Dipole Dimer Water Model. Nanomaterials 2023, 13, 16
The journal retracts the article titled “Capacitive Behavior of Aqueous Electrical Double Layer Based on Dipole Dimer Water Model”
- 24 November 2024
- Published by Elsevier in Chinese Journal of Physics
- Vol. 92, 1576-1592
Impact of mixing and configurational entropies on the entropy-driven potential of mean force
- 24 November 2024
- Published by Elsevier in Chinese Journal of Physics
- Vol. 92, 1576-1592
Impact of mixing and configurational entropies on the entropy-driven potential of mean force
- 3 September 2024
- Published by Elsevier in Chemical Physics
- Vol. 588
Adsorption and dynamics in cylindrical pore: Molecular dynamics and classical density functional theory study
- 3 September 2024
- Published by Elsevier in Chemical Physics
- Vol. 588
Adsorption and dynamics in cylindrical pore: Molecular dynamics and classical density functional theory study
- 1 September 2023
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 170 (9) , 090536
On Capacitance Enhancement at Decreasing Pore Width and its Relation with Solvent Concentration and Polarity
Classical density functional theory is used to study the capacitance enhancing issue of electrical double-layer using aqueous-like electrolyte and ionic liquid+solvent mixture (ILSM) as supporting electrolyte, respectively. The polar organic solvent and water-like solvent are described by an electric dipole dimer model. This study focuses on capacitance enhancing of counter-ion sized electrode pore (CISEP) relative to large pore capacitance and relation with electrode voltage applied, counter-ion relative size, solvent weight percentage in the bulk and its polarity depicted by electric dipole moment.
- 1 September 2023
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 170 (9) , 090536
On Capacitance Enhancement at Decreasing Pore Width and its Relation with Solvent Concentration and Polarity
Classical density functional theory is used to study the capacitance enhancing issue of electrical double-layer using aqueous-like electrolyte and ionic liquid+solvent mixture (ILSM) as supporting electrolyte, respectively. The polar organic solvent and water-like solvent are described by an electric dipole dimer model. This study focuses on capacitance enhancing of counter-ion sized electrode pore (CISEP) relative to large pore capacitance and relation with electrode voltage applied, counter-ion relative size, solvent weight percentage in the bulk and its polarity depicted by electric dipole moment.