Seçil Peker Adıgüzel
Research Subjects
Seçil Peker Adıgüzel has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Kerim Yapici
Department of Chemical Engineering, Suleyman Demirel University, Isparta, Turkey
2 shared publications - Nevra Ercan
Department of Chemical Engineering Engineering Faculty Istanbul University‐Cerrahpaşa Avcilar Istanbul 34320 Turkey
2 shared publications - Mehmet Fahri Sarac
Süleyman Demirel University
1 shared publication
Latest Publications
- 11 May 2025
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (15)
Development of PVDF‐HFP Based Flexible Hybrid Iontronic Film for Wearable Capacitive Sensor and E‐Skin Applications
Recently, flexible pressure sensors in piezo‐capacitive mechanisms have gained tremendous popularity due to their excellent potential for application in wearable sensors, electronic skin, human movement monitoring, etc. Herein, a high‐performance piezo‐capacitive composite containing poly(vinylidene fluoride‐co‐hexafluoropropylene)/graphene nanoribbon/([EMIM]Cl) (PVDF‐HFP/GNR/IL) as an iontronic hybrid film is presented. The tandem use of GNR and IL in the matrix to prepare the iontronic hybrid yields a homogeneous film with a highly electroactive phase (81%) and improves mechanical properties. PVDF‐HFP/GNR/IL is used as a dielectric layer to form an iontronic pressure sensor. The hybrid iontronic pressure sensor exhibits high sensitivity (≈1.64 kPa−1) in the low‐pressure range (<5 kPa) and a low detection limit of 1.29 Pa. Furthermore, it provides excellent performance with fast response (≈98 ms) and high repeatability, reproducibility, and reliability (1000 cycles). The flexible hybrid sensor offers promising possibilities for its application in wearable technology by demonstrating good sensing performance in detecting body movements such as knee bending and physiological signals such as swallowing. This work provides a new perspective on the simplified design and integration of robust, multifunctional, flexible piezocapacitive sensors.
- 11 May 2025
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (15)
Development of PVDF‐HFP Based Flexible Hybrid Iontronic Film for Wearable Capacitive Sensor and E‐Skin Applications
Recently, flexible pressure sensors in piezo‐capacitive mechanisms have gained tremendous popularity due to their excellent potential for application in wearable sensors, electronic skin, human movement monitoring, etc. Herein, a high‐performance piezo‐capacitive composite containing poly(vinylidene fluoride‐co‐hexafluoropropylene)/graphene nanoribbon/([EMIM]Cl) (PVDF‐HFP/GNR/IL) as an iontronic hybrid film is presented. The tandem use of GNR and IL in the matrix to prepare the iontronic hybrid yields a homogeneous film with a highly electroactive phase (81%) and improves mechanical properties. PVDF‐HFP/GNR/IL is used as a dielectric layer to form an iontronic pressure sensor. The hybrid iontronic pressure sensor exhibits high sensitivity (≈1.64 kPa−1) in the low‐pressure range (<5 kPa) and a low detection limit of 1.29 Pa. Furthermore, it provides excellent performance with fast response (≈98 ms) and high repeatability, reproducibility, and reliability (1000 cycles). The flexible hybrid sensor offers promising possibilities for its application in wearable technology by demonstrating good sensing performance in detecting body movements such as knee bending and physiological signals such as swallowing. This work provides a new perspective on the simplified design and integration of robust, multifunctional, flexible piezocapacitive sensors.
- 11 July 2024
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 45 (19) , e2400360
High Performance Piezoelectric Nanogenerators Based on Polyvinylidene Fluoride‐Graphene Nanoribbon Composite Thin Films
In this study, a highly efficient, sensitive, and lightweight piezoelectric nanogenerator (PENG) is developed using graphene nanoribbons (GNRs) incorporated into the polyvinylidene fluoride (PVDF) matrix. Unzipping multi‐walled carbon nanotubes is an effective and scalable strategy for synthesizing graphene nanoribbons. The synthesized GNRs are employed to prepare nanometer‐scale piezoelectric polymer composite films showing higher piezoelectric performance than neat PVDF. The impact of GNR concentration in the PVDF matrix on the electroactive phase content and piezoelectric properties of the composites is systematically investigated. X‐ray diffraction (XRD) and Fourier‐transformed infrared spectroscopy (FT‐IR) analysis demonstrate an increase in the electroactive β and γ phases of PVDF by incorporating GNRs in the composites. With the optimized concentration of GNRs (1 wt%), the fabricated piezoelectric device can generate open‐circuit voltage and an output power density of 26 V and 16.52 µWcm2, respectively. It is also found that the PVDF‐GNR 1 nanogenerator can be used to generate electrical power by converting mechanical energy from different human activities such as wrist bending, palm tapping, and toe tapping. The findings indicate that (PVDF‐GNR 1) PENG can be applied in self‐powered portable and wearable electronic devices.
- 11 July 2024
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 45 (19) , e2400360
High Performance Piezoelectric Nanogenerators Based on Polyvinylidene Fluoride‐Graphene Nanoribbon Composite Thin Films
In this study, a highly efficient, sensitive, and lightweight piezoelectric nanogenerator (PENG) is developed using graphene nanoribbons (GNRs) incorporated into the polyvinylidene fluoride (PVDF) matrix. Unzipping multi‐walled carbon nanotubes is an effective and scalable strategy for synthesizing graphene nanoribbons. The synthesized GNRs are employed to prepare nanometer‐scale piezoelectric polymer composite films showing higher piezoelectric performance than neat PVDF. The impact of GNR concentration in the PVDF matrix on the electroactive phase content and piezoelectric properties of the composites is systematically investigated. X‐ray diffraction (XRD) and Fourier‐transformed infrared spectroscopy (FT‐IR) analysis demonstrate an increase in the electroactive β and γ phases of PVDF by incorporating GNRs in the composites. With the optimized concentration of GNRs (1 wt%), the fabricated piezoelectric device can generate open‐circuit voltage and an output power density of 26 V and 16.52 µWcm2, respectively. It is also found that the PVDF‐GNR 1 nanogenerator can be used to generate electrical power by converting mechanical energy from different human activities such as wrist bending, palm tapping, and toe tapping. The findings indicate that (PVDF‐GNR 1) PENG can be applied in self‐powered portable and wearable electronic devices.
- 13 August 2019
- Published by Springer Nature in Journal of Coatings Technology and Research
- Vol. 17 (1) , 193-205
Rheological properties and anticorrosion performance of graphene oxide- and reduced graphene oxide-based nanocomposites
- 13 August 2019
- Published by Springer Nature in Journal of Coatings Technology and Research
- Vol. 17 (1) , 193-205
Rheological properties and anticorrosion performance of graphene oxide- and reduced graphene oxide-based nanocomposites
- 11 December 2018
- Published by Muhendislik Bilimleri ve Tasarim Dergisi in Mühendislik Bilimleri ve Tasarım Dergisi
- Vol. 6 (4) , 665-671
RHEOLOGICAL BEHAVIOR OF PARTICLE SIZE DEPENDENT FUMED SILICA BASED SHEAR THICKENING FLUIDS
Üç farklı ortalama parçacık boyutuna sahip (8, 12 ve 18nm) füme silikaların PEG200 taban akışkanına dört farklı kütlesel fraksiyon aralığında (%5, 10 ,15 ve 20) dağıtılması ile elde edilen süspansiyon akışkanların reolojik (viskozite, kritik kesme hızı, depolama modülü ve kayıp modülleri) davranışları incelenmiştir. Doğrusal ve doğrusal olmayan viskoelastik ölçümlerden elde edilen bulgular da, kütlece %5 fraksiyonda hazırlanan süspansiyonların Newton kuralına uyduğunu ayrıca artan fraksiyona bağlı olarak viskoziteninde arttığı gözlemlenmiştir. Düşük kütlesel fraksiyonlarda nanoparçacık boyutu ile kaymadan dolayı viskozite kalınlaşmasına etki ettiği gözlemlenirken, kütlesel fraksiyon artışı ile bu etkinin azaldığı da görülmüştür. Ayrıca tüm parçacık boyutu ve fraksiyonlarda depolama ve kayıp modulüslerinin salınım gerilimleri incelendiğinde süspansiyonların viskoz davranış özelliği göstermiştir. Bu bulgular daha güçlü ve hafif kesme ile kalınlaşan süspansiyonların hazırlanmasını ve balistik esaslı çalışmalarda kullanılması açısından önem arz etmektedir.
- 11 December 2018
- Published by Muhendislik Bilimleri ve Tasarim Dergisi in Mühendislik Bilimleri ve Tasarım Dergisi
- Vol. 6 (4) , 665-671
RHEOLOGICAL BEHAVIOR OF PARTICLE SIZE DEPENDENT FUMED SILICA BASED SHEAR THICKENING FLUIDS
Üç farklı ortalama parçacık boyutuna sahip (8, 12 ve 18nm) füme silikaların PEG200 taban akışkanına dört farklı kütlesel fraksiyon aralığında (%5, 10 ,15 ve 20) dağıtılması ile elde edilen süspansiyon akışkanların reolojik (viskozite, kritik kesme hızı, depolama modülü ve kayıp modülleri) davranışları incelenmiştir. Doğrusal ve doğrusal olmayan viskoelastik ölçümlerden elde edilen bulgular da, kütlece %5 fraksiyonda hazırlanan süspansiyonların Newton kuralına uyduğunu ayrıca artan fraksiyona bağlı olarak viskoziteninde arttığı gözlemlenmiştir. Düşük kütlesel fraksiyonlarda nanoparçacık boyutu ile kaymadan dolayı viskozite kalınlaşmasına etki ettiği gözlemlenirken, kütlesel fraksiyon artışı ile bu etkinin azaldığı da görülmüştür. Ayrıca tüm parçacık boyutu ve fraksiyonlarda depolama ve kayıp modulüslerinin salınım gerilimleri incelendiğinde süspansiyonların viskoz davranış özelliği göstermiştir. Bu bulgular daha güçlü ve hafif kesme ile kalınlaşan süspansiyonların hazırlanmasını ve balistik esaslı çalışmalarda kullanılması açısından önem arz etmektedir.