VBVladyslav O Bereka

Vladyslav O Bereka

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Vladyslav O Bereka has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    NANOSECOND VOLTAGE PULSE GENERATOR WITH ADJUSTABLE EDGE STEEPNESS

    by V.O. Bereka, I.P. Kondratenko

    When developing pulsed power supplies, the output signals of which are in the nanosecond range, difficulties arise with the correspondence of theoretical calculations with real oscillographic data on the secondary windings of pulse transformers, namely - the saturation time of the core of their magnetic circuit, due to the uncertainty of the nonlinear characteristic of the ferromagnetic core. The work proved the possibility of adjusting the output parameters of the generator of short (~100 ns) voltage pulses using an auxiliary bias winding in the pulse transformer of the generator output link. By adjusting the initial magnetic field strength in the core of this transformer within H0=0.25-20 A/m, by changing the magnitude of the bias current, it was possible to increase the amplitude values of the voltage and current on the load more than twice and achieve maximum values: Uа=16.5 kV, Iа=180A at H0=20 A/m. The load of the power source was a capacitive-type discharge chamber to create a pulsed barrier discharge. References 10, figures 6.

  • Specific features of the 25KhGNMT structural steel surface after treatment with pulse barrier discharge

    by L. M. Lobanov, M. O. Pashchyn, O. М. Berdnikova, О. S. Kushnarova, V. O. Bereka, O. L. Mikhodui

    The use of electrophysical processing methods for metal materials to improve the mechanical properties of metal and alloy products is a promising direction for the development of surface strengthening processes. The use of pulsed barrier discharge (PBD), which generates low-temperature plasma on the metal surface during processing is a new approach in metalworking. The effect of PBD on structural changes at the dislocation level and their influence on the physicomechanical properties of 25KhGNMT steel after its surface treatment is studied. The features of the structure formed in the surface layers of the treated metal are analyzed. The research shows that, compared to untreated metal, noticeable structural and phase changes are observed in the surface treated with PBD up to a thickness of 2200 mkm: the formation of a martensite-bainite structure with an increase in the volume fraction of lower bainite; fragmentation of rail structural components; formation of a substructure with a generally uniform distribution of dislocation density and the absence of local internal stress concentrators. This provides surface strengthening and crack-growth resistance of structural steel.

  • Open Access

    Positive corona discharge in air at constant voltage in the electrode system: thin rod, the length of which is limited by a metal disk – plane

    by V. O. Bereka, I. V. Bozhko, Yu. M. Vasetsky, I. P. Kondratenko

    Introduction. Corona discharge, compared to discharges with a large concentration of electron avalanches and streamers, develops in the interelectrode gap with much larger dimensions, where streamers spread over a greater distance and, accordingly, each of them exists for a longer time. Problem. The search for methods for taking into account a significant number of factors that influence the development of positive corona discharge in technological processes determines the relevance of research in this area. Goal. To determine the influence of the geometric characteristics of an electrode system with metal disk and thin rod (cylindrical needle) of finite length opposite the plane and the voltage between the electrodes on the volume of the areas in which the beginning of the development of electron avalanches near the needle leads to their transition to a streamer form of a corona discharge in air at atmospheric pressure, as well as to obtain experimental data for the corona discharge in the electrode system with the same configuration. Methodology. Theoretical studies are based on the study of the avalanche stage of corona discharge, in which the avalanche of electrons under certain condition transforms into the streamer. The experiments use an electrode system for which theoretical calculations have been performed. Results. On the basis of calculations the regions where the appearance of initial electrons leads to the growth of electron avalanches and their transformation into streamers were found. The influence of the needle length, the tip curvature radius and the voltage between the electrodes on the volume of the corresponding regions was investigated. The influence of the needle length on the components of the discharge current and the conditions for the appearance of streamers was experimentally investigated. Scientific novelty. The proposed indicator of streamer emergence indicates the existence of a general trend in the dependences of the threshold voltage of streamer emergence on the needle length and the tip curvature radius, which was confirmed in experimental studies. Experimental results for the studied electrode system showed the existence of a needle length at which the amplitude of streamer current pulses reaches a maximum value, and the avalanche component of the total current is minimal. Practical value. The proposed quantitative indicator of the appearance of streamers in the complex takes into account the voltage between the electrodes, the tip radius and the length of the needle. It allows, depending on the purpose, to give preference to the required design of the electrode system. References 15, figures 6.

  • MULTI-NEEDLE ELECTRODE SYSTEM WITH A METAL DISC DESIGNED FOR OZONE PRODUCTION IN THE STREAMER CORONA DISCHARGE

    by V.O. Bereka, I.V. Bozhko, Yu.M. Vasetsky, I.P Kondratenko

    The search for methods for taking into account a significant number of factors that affect the development of a positive corona discharge in technological processes determines the relevance of research in this area. The aim of the work is to determine for the streamer corona discharge in air at atmospheric pressure the influence of the geometric configuration of a multi-needle electrode system with a metal disk, as well as the air flow rate with its supply along the needles on the distribution of the electric field, the fulfillment of the avalanche-streamer transition condition, the ozone output and the energy consumption required for this. It is shown the existence of threshold values for the interelectrode voltage, needle lengths and distance between the needles, which limit the possibility of the appearance of streamers in the corona dis-charge. Based on the experimental results, in relation to energy consumption, it can be concluded that there are opti-mal values for the length of needles and the distance between them. It was found that an increase in air flow in the elec-trode system during ozone production leads to a decrease in specific energy consumption and simultaneously to a de-crease in ozone concentration. This relationship, depending on the purpose of the streamer corona discharge, must be taken into account in its practical application. References 7, figures 4, tables 2.

  • Factors affecting homogeneity of a nanosecond impulse barrier discharge in air at atmospheric pressure and its physical nature

    by Igor V Bozhko, Vladyslav O Bereka, Igor P Kondratenko, Yuriy V Serdyuk

    Factors determining the existence of an homogeneous impulse dielectric barrier discharge in air at atmospheric pressure are analyzed based on the results of the performed experimental investigations. In particular, the impact of the rate of voltage rise on the front of the applied impulses and the distance between the electrodes on discharge homogeneity is examined. In the experiments, the discharge was initiated in gaps (0.25–4) mm between flat electrodes, where one of them was covered with a glass barrier, by applying voltage impulses with the steepness (0.25–2.2) kV ns−1. The homogeneity of the discharges is determined from the photographs obtained during a single voltage pulse. It is found that charges deposited on the barrier surface by discharges occurring during sequentially applied voltage impulses create a stochastic pattern provoking the appearance of radiation zones with different intensity. It is concluded that electron concentration (105–108) cm−3 needed for generation of a homogeneous discharge is provided by pre-ionization of the gas by successive discharge impulses.


  • Open Access

    ELECTROSTATIC FIELD IN THE AIR GAP OF A PLANE-PARALLEL ELECTRODE SYSTEM FOR WATER DROPLET TREATMENT USING BARRIER DISCHARGE TECHNOLOGY

    by R.O. Kryshchuk, V.O. Bereka, Р.с. Крищук

    This study investigates the electrostatic field in a discharge chamber (DC) designed for water purification from organic pollutants using pulsed barrier discharge (PBD) technology. The DC consists of vertical plane-parallel electrodes, with an air gap containing water droplets between them, and one of the electrodes is insulated from the air gap by a dielectric (barrier). The research employs computer modeling in both two-dimensional and three-dimensional setups. Therefore, the aim of this work is to compare the distribution of the electrostatic field intensity of PBD in the air gap and the electrical capacitance of the DC to establish the optimal distance between droplets and to determine the calculation error using the two-dimensional DC model. Electrostatic field modeling was performed using the Poisson equation and the finite element method. Calculations were performed for two-dimensional and three-dimensional models with conditions of a droplet diameter of 1 mm, a gas gap length of 3.36 mm, and an applied voltage of 3 kV. The influence of droplet conductivity and the distance between them on the characteristics of the electrostatic field in the gas medium and in the droplets was investigated. A comparison of the calculated capacitance values of the DC in the two-dimensional and three-dimensional models depending on the distance between the droplets was conducted. The research results can be used in the application of electro-discharge technology based on pulsed barrier discharges in water treatment systems, specifically in selecting the parameters for the movement of the treated liquid in the plasma zone. References 10, figures 7.

  • Open Access

    THE INFLUENCE OF THE CONNECTING HIGH-VOLTAGE CABLE TO THE CURRENTS AND VOLTAGES IN DEVICE OF PULSED DIELECTRIC BARRIER DISCHARGE

    by V.O. Bereka, Yu.M. Vasetsky, I.P. Kondratenko, Ю.м. Васецький

    The article is devoted to the study of the connecting cable influence, as an element with distributed parameters between the pulsed generator and discharge chamber in the electrical complex based on pulsed barrier discharge, to the values of currents and voltages in the system. Based on experimental studies and modeling, it has been established that the currents at different ends of the cable differ significantly from each other, which is due to the large value capacitive pulsed charging current of the cable. It has been established that during the barrier discharge, a correctly measured pulse current has significantly shorter duration than pulse of voltage. During the electrical discharge, a feature of the dependence of the current at the input to the cable is the appearance of an additional local maximum, of much smaller amplitude with a time shift equal to the time the electromagnetic wave movement along the cable. It has been shown that the use of the connecting cable of increased length makes it possible to increase the voltage between the electrodes of two times in comparison with the voltage at the cable input, without taking into account the voltage drop across the internal resistance of the generator when the cable length no less than twice the path length that the electromagnetic wave moves during the time from start of the pulse to maximum value generator pulse. References 16, figures 7.


  • Open Access

    COORDINATION OF PARAMETERS OF THE POWER SOURCE AND THE WORKING CHAMBER FOR WATER TREATMENT WITH PULSE BARRIER DISCHARGE

    by V.O. Bereka, I.V. Bozhko, O.M. Karlov, I.P. Kondratenko

    To determine the mutually agreed parameters of the output link of the generator of short (~100 ns) pulses with a working chamber, in which water is treated in the droplet-film state by a pulsed barrier discharge, an approximate mathematical model was developed that describes the transient processes in the circuit. The reliability of the model is confirmed by experimental data. The optimal parameters of the capacitance of the dielectric barrier and magnetic keys were calculated, according to which the efficiency of energy transfer to the working chamber reaches 62%. It is shown that it largely depends on the ratio of the barrier capacity of the working chamber to the output capacity of the pulse generator, the optimal value of which is ≈2.6. The selection of the value of the dissipation inductance of the magnetic key, through which the discharge of the barrier capacity occurs after the end of the direct current pulse, is justified. It was established that the consistency of the parameters of the output link of the pulse generator and the working chamber makes it possible to significantly reduce the thermal load on the fast-acting opening diode in the output link of the pulse generator. References 15, Figures 8.


  • Open Access

    INFLUENCE OF PARAMETERS OF WATER MOVEMENT AT ITS TREATMENTS ON ENERGY EFFICIENCY PULSE BARRIER DISCHARGE

    by V.O. Bereka, I.V. Bozhko, I.P. Kondratenko

    A study of the energy efficiency of the pulsed barrier discharge during water treatment in the aerosol state depending on the energy of the pulses (21-72 mJ), their repetition rate (50-300 Hz), the concentration of organic impurities in water (50-100 mg / l) and water content (1.6−3.2%) in the water-air mixture. The discharge was generated by unipolar short pulses (~ 100 ns) in an electrode system with vertically arranged cylindrical electrodes with a diameter of 2 mm, the distance between which was 2 mm. The highest energy yield, which was obtained by decomposing the impurity by 90%, was 32 g / kWh. In order to determine the influence of water movement parameters on the energy efficiency of a pulsed barrier discharge under similar conditions, the energy efficiency of this type of discharge during water movement in film, drip and aerosol states was compared. It is concluded that water treatment should be carried out in the drip state on the submillimeter size of the drops. In the case of such water movement, the energy efficiency of the pulsed barrier discharge is ≈30% higher than in aerosol. References 15, figures 6, table 1.


  • Open Access

    TREATMENT OF AN AQUEOUS SOLUTION OF METHYLENE BLUE IN THE DROPLET-FILM STATE BY PULSED BARRIER DISCHARGE

    by V.O. Bereka, I.V. Bozhko, O.N. Karlov, I.P. Kondratenko

    The influence of various factors that can affect the efficiency of pulsed barrier discharge treatment in the air of atmospheric pressure of a model sample of contaminated water in the droplet-film state was investigated. The impurity in the water was an organic dye (methylene blue) with an initial concentration of 50 mg / l. Water consumption was 2–4 l / min, the characteristic diameter of the droplets was 1.7 mm, and the film thickness at the electrodes was about 0.15 mm. The water was treated in a flat discharge chamber with gas gaps of 3.36 mm and glass dielectric barriers, and in addition in an ozonation chamber, which used ozone that had not previously been useful. The discharge was excited by short ~ 100 ns pulses from voltage up to 21 kV, which provided the current density amplitude up to 1.7 A / cm2 and their energy up to 140 mJ. The decomposition time of the impurity and the energy efficiency of the discharge depending on the pulse repetition frequency of 25–300 Hz were studied. The discharge had the highest energy efficiency at frequencies of 25-50 Hz, at which the energy yield, which corresponds to 50% decomposition of the impurity, reaches ≈270 g / kWh, and for 90% decomposition − 60 g / kWh. As the pulse energy increases, the transparency of the solution for ultraviolet light increases, which is associated with the splitting of stable benzene rings that is part of the impurity molecule. No noticeable effect of water and gas consumption (0.36-1.5 l / min) on the research results was found. References 16, figures 8.