Peter Neuhaus
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Peter Neuhaus has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Gerhard Fettweis
Vodafone Chair for Mobile Communications Systems, Technische Universitt Dresden, Dresden, Germany
6 shared publications - Meik Dörpinghaus
Vodafone Chair Mobile Communications Systems, Technische Universitt Dresden, Dresden, Germany
2 shared publications - Andre Mendes Cavalcante
Ericsson Research, Ericsson Telecomunicaes Ltda., Indaiatuba, Brazil
1 shared publication - Carlos Salle Moreno
Accenture Madrid, Madrid, Spain
1 shared publication - Diana Marcela V. Melo
Departamento de Engenharia Eltrica (DEE), Pontifcia Universidade Catlica do Rio de Janeiro (PUC-Rio), Rio de Janeiro, Brazil
1 shared publication - Francisco Valera
Universidad Carlos III de Madrid
1 shared publication
Latest Publications
- 9 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 22 (8) , 5321-5336
Zero-Crossing Precoding Techniques for Channels With 1-Bit Temporal Oversampling ADCs
A promising approach to reducing the energy consumption is to consider coarse quantization at the receiver. In this study, we investigate novel precoding techniques in space and time for bandlimited multiuser MIMO downlink channels with 1-bit quantization and oversampling at the receiver, considering zero-crossing modulation. The proposed time-instance zero-crossing modulation conveys the information into the time-instances of zero-crossings. Two design criteria for time-instance zero-crossing modulation are investigated, namely, the minimum distance to the decision threshold and the mean-square error between the received and the desired signal. The maximization of the minimum distance to the decision threshold can be formulated as a quadratically constraint quadratic program. As an alternative, an equivalent problem can be formulated based on power minimization, which reduces computational complexity. Departing from the conventional mean-square error based technique, a more sophisticated algorithm is developed, which implies active constellation extension in order to improve the performance at high SNR. The extended problem is solved with two approaches, namely by formulating the problem as a second-order cone program and by considering an alternating optimization algorithm. Numerical results show that the proposed time-instance zero-crossing precoding methods significantly improve the bit error rate compared to the state-of-the-art methods.
- 9 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 22 (8) , 5321-5336
Zero-Crossing Precoding Techniques for Channels With 1-Bit Temporal Oversampling ADCs
A promising approach to reducing the energy consumption is to consider coarse quantization at the receiver. In this study, we investigate novel precoding techniques in space and time for bandlimited multiuser MIMO downlink channels with 1-bit quantization and oversampling at the receiver, considering zero-crossing modulation. The proposed time-instance zero-crossing modulation conveys the information into the time-instances of zero-crossings. Two design criteria for time-instance zero-crossing modulation are investigated, namely, the minimum distance to the decision threshold and the mean-square error between the received and the desired signal. The maximization of the minimum distance to the decision threshold can be formulated as a quadratically constraint quadratic program. As an alternative, an equivalent problem can be formulated based on power minimization, which reduces computational complexity. Departing from the conventional mean-square error based technique, a more sophisticated algorithm is developed, which implies active constellation extension in order to improve the performance at high SNR. The extended problem is solved with two approaches, namely by formulating the problem as a second-order cone program and by considering an alternating optimization algorithm. Numerical results show that the proposed time-instance zero-crossing precoding methods significantly improve the bit error rate compared to the state-of-the-art methods.
- 19 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 21 (12) , 11164-11178
On Robust Millimeter Wave Line-of-Sight MIMO Communications With Few-Bit ADCs
This work focuses on providing robust line-of-sight (LoS) spatial multiplexing at flexible communications distances and directions. Considering oblique LoS uniform linear arrays, we first derive the rank-deficient and orthogonal conditions for the LoS MIMO channel matrices. With this discovery, the topology of high spatial-resolution on one side of the link is shown with a wide full-rank-channel guarantee interval over distance and direction variations. Additionally, to reduce the implementation costs and power consumption, we propose to use low amplitude-resolution quantizers at the side of high spatial-resolution. With numerical evaluations on systems having few-bit analog-to-digital converters (ADCs), the proposed system design is shown to simultaneously achieve a higher spectrum efficiency and higher energy efficiency compared to a conventional single-stream high-amplitude-resolution over a wide signal-to-noise-ratio (SNR) range. Furthermore, we investigate channel equalization under the extreme case of using 1-bit ADCs. After providing a new viewpoint on the generalized approximate message passing (GAMP) algorithm from constrained Bethe free energy minimization, our simulations on bit-error-rates show that the GAMP algorithm can significantly reduce the performance degradation due to coarse quantization and can significantly outperform the Bussgang decomposition based linear minimummean-square-error estimator, especially at high SNRs.
- 19 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 21 (12) , 11164-11178
On Robust Millimeter Wave Line-of-Sight MIMO Communications With Few-Bit ADCs
This work focuses on providing robust line-of-sight (LoS) spatial multiplexing at flexible communications distances and directions. Considering oblique LoS uniform linear arrays, we first derive the rank-deficient and orthogonal conditions for the LoS MIMO channel matrices. With this discovery, the topology of high spatial-resolution on one side of the link is shown with a wide full-rank-channel guarantee interval over distance and direction variations. Additionally, to reduce the implementation costs and power consumption, we propose to use low amplitude-resolution quantizers at the side of high spatial-resolution. With numerical evaluations on systems having few-bit analog-to-digital converters (ADCs), the proposed system design is shown to simultaneously achieve a higher spectrum efficiency and higher energy efficiency compared to a conventional single-stream high-amplitude-resolution over a wide signal-to-noise-ratio (SNR) range. Furthermore, we investigate channel equalization under the extreme case of using 1-bit ADCs. After providing a new viewpoint on the generalized approximate message passing (GAMP) algorithm from constrained Bethe free energy minimization, our simulations on bit-error-rates show that the GAMP algorithm can significantly reduce the performance degradation due to coarse quantization and can significantly outperform the Bussgang decomposition based linear minimummean-square-error estimator, especially at high SNRs.
- 8 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Signal Processing
- Vol. 69 (1053587X) , 5403-5418
Task-Based Analog-to-Digital Converters
Obtaining digital representations of multivariate continuous-time (CT) signals is a challenge encountered in many signal processing systems. In practice, these signals are often acquired to extract some underlying information, i.e., for a specific task. Employing conventional task-agnostic analog-to-digital converters (ADCs), typically designed to minimize the mean squared error (MSE) in reconstructing the CT input signal, can be costly and energy-inefficient in such cases. In this work, we study task-based ADCs, which are designed to obtain a digital representation of a multivariate CT input process with the goal of recovering an underlying statistically related parameter vector, referred to as the task . The proposed system employs analog filtering, uniform sampling, and scalar uniform quantization of the input process before recovering the task vector using a linear digital recovery filter. We optimize the analog and digital filters and derive closed-form expressions for the achievable MSE in recovering the task vector from a set of analog signals when utilizing ADCs with a fixed sampling rate and amplitude resolution. Based on our derivation, we provide guidelines for designing practical acquisition systems subject to a constraint on the bit rate. Our analysis proves that the intuitive approaches of either recovering the task vector solely in digital or designing the analog filter to estimate the task vector are inferior to the proposed joint design. We then consider the recovery of a set of matched filter outputs under a rate budget. We numerically verify our theoretical observations and demonstrate that task-based ADCs substantially outperform analog matched filtering as well as applying the matched filter solely in the digital domain. When acquiring signals for a task under tight bit budgets, we also show that it is often preferable to sample below the Nyquist rate instead of reducing the quantization resolution.
- 8 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Signal Processing
- Vol. 69 (1053587X) , 5403-5418
Task-Based Analog-to-Digital Converters
Obtaining digital representations of multivariate continuous-time (CT) signals is a challenge encountered in many signal processing systems. In practice, these signals are often acquired to extract some underlying information, i.e., for a specific task. Employing conventional task-agnostic analog-to-digital converters (ADCs), typically designed to minimize the mean squared error (MSE) in reconstructing the CT input signal, can be costly and energy-inefficient in such cases. In this work, we study task-based ADCs, which are designed to obtain a digital representation of a multivariate CT input process with the goal of recovering an underlying statistically related parameter vector, referred to as the task . The proposed system employs analog filtering, uniform sampling, and scalar uniform quantization of the input process before recovering the task vector using a linear digital recovery filter. We optimize the analog and digital filters and derive closed-form expressions for the achievable MSE in recovering the task vector from a set of analog signals when utilizing ADCs with a fixed sampling rate and amplitude resolution. Based on our derivation, we provide guidelines for designing practical acquisition systems subject to a constraint on the bit rate. Our analysis proves that the intuitive approaches of either recovering the task vector solely in digital or designing the analog filter to estimate the task vector are inferior to the proposed joint design. We then consider the recovery of a set of matched filter outputs under a rate budget. We numerically verify our theoretical observations and demonstrate that task-based ADCs substantially outperform analog matched filtering as well as applying the matched filter solely in the digital domain. When acquiring signals for a task under tight bit budgets, we also show that it is often preferable to sample below the Nyquist rate instead of reducing the quantization resolution.
- Open Access
- 6 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 2, 1915-1934
Zero-Crossing Modulation for Wideband Systems Employing 1-Bit Quantization and Temporal Oversampling: Transceiver Design and Performance Evaluation
Next-generation wireless communications systems are anticipated to utilize the vast amount of available spectrum in the millimeter-wave and sub-terahertz bands above 100 G Hz to meet the ever-increasing demand for higher data rates. However, the analog-to-digital converter (ADC) power consumption is expected to be a major bottleneck if conventional system designs are employed at these frequencies. Instead, shifting the ADC resolution from the amplitude domain to the time domain by employing 1-bit quantization and temporal oversampling w.r.t. the Nyquist rate is expected to be more energy-efficient. Hence, we consider a system employing 1-bit quantization and temporal oversampling at the receiver, which operates on a wideband line-of-sight channel. We present a practical transceiver design for a zero-crossing modulation waveform, which combines faster-than-Nyquist signaling and runlength-limited (RLL) transmit sequences. To this aim, we derive four fixed-length finite-state machine RLL encoders enabling efficient transmit signal construction and soft-demapping at the receiver. Moreover, we propose a soft-output equalizer, which approximates maximum a posteriori RLL symbol detection. We evaluate the system performance in terms of peak-to-average-power ratio, coded block error rate, and a lower bound on the spectral efficiency (SE) w.r.t. a fractional power containment bandwidth. Our numerical results show that SEs of up to 4 bit/s/Hz are achievable with the presented transceiver design.
- 6 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 2, 1915-1934
Open AccessZero-Crossing Modulation for Wideband Systems Employing 1-Bit Quantization and Temporal Oversampling: Transceiver Design and Performance Evaluation
Next-generation wireless communications systems are anticipated to utilize the vast amount of available spectrum in the millimeter-wave and sub-terahertz bands above 100 G Hz to meet the ever-increasing demand for higher data rates. However, the analog-to-digital converter (ADC) power consumption is expected to be a major bottleneck if conventional system designs are employed at these frequencies. Instead, shifting the ADC resolution from the amplitude domain to the time domain by employing 1-bit quantization and temporal oversampling w.r.t. the Nyquist rate is expected to be more energy-efficient. Hence, we consider a system employing 1-bit quantization and temporal oversampling at the receiver, which operates on a wideband line-of-sight channel. We present a practical transceiver design for a zero-crossing modulation waveform, which combines faster-than-Nyquist signaling and runlength-limited (RLL) transmit sequences. To this aim, we derive four fixed-length finite-state machine RLL encoders enabling efficient transmit signal construction and soft-demapping at the receiver. Moreover, we propose a soft-output equalizer, which approximates maximum a posteriori RLL symbol detection. We evaluate the system performance in terms of peak-to-average-power ratio, coded block error rate, and a lower bound on the spectral efficiency (SE) w.r.t. a fractional power containment bandwidth. Our numerical results show that SEs of up to 4 bit/s/Hz are achievable with the presented transceiver design.
- Open Access
- 3 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 219859-219880
Enhanced Remote Areas Communications: The Missing Scenario for 5G and Beyond 5G Networks
The next generation of mobile communication system will allow a plethora of new services and use cases. By offering support for high throughput connections, low latency response and massive number of connections, the fifth generation of the mobile network will trigger applications unseen in any other network. However, one important application scenario is not being properly addressed by the players responsible for the mobile networks’ standardization, that is the remote and rural areas network. This scenario requires large cells with high throughput, flexibility to opportunistically exploit free bands below 1 GHz and spectrum agility to change the operational frequency when an incumbent is detected. Incipient actions are being considered for the Release 17 but based on the new radio specification as starting point. The limitations imposed by orthogonal waveforms in the physical layers hinder the exploitation of vacant TV channels in rural and remote areas. 5G-RANGE, a Brazil-Europe bilateral cooperation project, aims at conceiving, implementing and deploying an innovative mobile network, designed to provide reliable and cost-effective connection in these regions. This network can be seamlessly integrated with the other 5G scenarios, closing the connectivity gap between the urban, rural and remote areas. Hence, 5G-RANGE network is an interesting complementary solution for beyond 5G standards. This paper presents the major achievements of the 5G-RANGE project, from the design of the physical, medium access control and network layers, to the field demonstrations. The paper also covers the business models that can be used to make the deployment of this technology a reality.
- 3 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 219859-219880
Open AccessEnhanced Remote Areas Communications: The Missing Scenario for 5G and Beyond 5G Networks
The next generation of mobile communication system will allow a plethora of new services and use cases. By offering support for high throughput connections, low latency response and massive number of connections, the fifth generation of the mobile network will trigger applications unseen in any other network. However, one important application scenario is not being properly addressed by the players responsible for the mobile networks’ standardization, that is the remote and rural areas network. This scenario requires large cells with high throughput, flexibility to opportunistically exploit free bands below 1 GHz and spectrum agility to change the operational frequency when an incumbent is detected. Incipient actions are being considered for the Release 17 but based on the new radio specification as starting point. The limitations imposed by orthogonal waveforms in the physical layers hinder the exploitation of vacant TV channels in rural and remote areas. 5G-RANGE, a Brazil-Europe bilateral cooperation project, aims at conceiving, implementing and deploying an innovative mobile network, designed to provide reliable and cost-effective connection in these regions. This network can be seamlessly integrated with the other 5G scenarios, closing the connectivity gap between the urban, rural and remote areas. Hence, 5G-RANGE network is an interesting complementary solution for beyond 5G standards. This paper presents the major achievements of the 5G-RANGE project, from the design of the physical, medium access control and network layers, to the field demonstrations. The paper also covers the business models that can be used to make the deployment of this technology a reality.
- 8 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 67 (8) , 5588-5603
Secrecy Energy Efficiency of MIMOME Wiretap Channels With Full-Duplex Jamming
Full-duplex (FD) jamming transceivers are recently shown to enhance the information security of wireless communication systems by simultaneously transmitting artificial noise (AN) while receiving information. In this work, we investigate if FD jamming can also improve the system’s secrecy energy efficiency (SEE) in terms of securely communicated bits-per- Joule, when considering the additional power used for jamming and self-interference (SI) cancellation. Moreover, the degrading effect of the residual SI is also taken into account. In this regard, we formulate a set of SEE maximization problems for a FD multiple-input-multiple-output multiple-antenna eavesdropper (MIMOME) wiretap channel, considering both cases where exact or statistical channel state information (CSI) is available. Due to the intractable problem structure, we propose iterative solutions in each case with a proven convergence to a stationary point. Numerical simulations indicate only a marginal SEE gain, through the utilization of FD jamming, for a wide range of system conditions. However, when SI can efficiently be mitigated, the observed gain is considerable for scenarios with a small distance between the FD node and the eavesdropper, a high Signal-to-noise ratio (SNR), or for a bidirectional FD communication setup.
- 8 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 67 (8) , 5588-5603
Secrecy Energy Efficiency of MIMOME Wiretap Channels With Full-Duplex Jamming
Full-duplex (FD) jamming transceivers are recently shown to enhance the information security of wireless communication systems by simultaneously transmitting artificial noise (AN) while receiving information. In this work, we investigate if FD jamming can also improve the system’s secrecy energy efficiency (SEE) in terms of securely communicated bits-per- Joule, when considering the additional power used for jamming and self-interference (SI) cancellation. Moreover, the degrading effect of the residual SI is also taken into account. In this regard, we formulate a set of SEE maximization problems for a FD multiple-input-multiple-output multiple-antenna eavesdropper (MIMOME) wiretap channel, considering both cases where exact or statistical channel state information (CSI) is available. Due to the intractable problem structure, we propose iterative solutions in each case with a proven convergence to a stationary point. Numerical simulations indicate only a marginal SEE gain, through the utilization of FD jamming, for a wide range of system conditions. However, when SI can efficiently be mitigated, the observed gain is considerable for scenarios with a small distance between the FD node and the eavesdropper, a high Signal-to-noise ratio (SNR), or for a bidirectional FD communication setup.