AGAmar Nath Ghosh

Amar Nath Ghosh

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Amar Nath Ghosh has a total of 57 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Inkjet-Printed MoS2 D-Shaped Fiber for Resonance-Enhanced Optical Sensing

    by Amar N. Ghosh, Mingfei Xiao, Jinrui Chen, Victor Pacheco-Peña, Meng Huang, Noel Healy, Tawfique Hasan, Anna C. Peacock

    Two-dimensional (2D) materials have shown great potential for applications in environmental monitoring and sensing due to their unique physical and chemical properties. In particular, molybdenum disulfide (MoS2) has emerged as a versatile 2D material platform for many optical and optoelectronic applications due to its high refractive index, large surface-to-volume ratio, and tunable bandgap. In this work, the integration of MoS2 layers on a side-polished optical fiber with a D-shaped cross-section has been demonstrated using a low-cost and scalable inkjet printing technique. The MoS2-integrated optical fibers are shown to offer strong wavelength-dependent light-matter interactions that can be controlled by the thickness of the 2D material, allowing for tuning of their operation across the entire telecom band. Using a printed device with a MoS2 layer thickness of 30 nm, designed to exhibit a resonance-enhanced transmission dip at wavelengths of ∼1.50 μm, a refractive index sensor has been demonstrated using saline solutions. The experimental results have been verified via numerical simulations, confirming the sensitivity and flexibility offered by the 2D material structures. These results indicate that inkjet-printed MoS2 optical fiber devices are suitable for the development of large-scale sensing networks.

  • Open Access

    Laser-drawn silicon core fibers for nonlinear photonics

    by Meng Huang, Amar N. Ghosh, Clarissa M. Harvey, Michael Fokine, Anna C. Peacock

    The linear and nonlinear properties of laser-drawn silicon core fibers (SCFs) are characterized in the telecom band for the first time. We show that the SCFs produced with micrometer-sized core diameters exhibit low optical losses (∼1 dB/cm) straight from the drawing tower, indicating a high-quality of the crystalline core materials. Moreover, by using an adapted fiber tapering method, the core diameter of these fibers can be precisely tailored to obtain longitudinal profiles optimized for low loss coupling, with uniform waist regions over lengths up to ∼7 cm and a further reduction in the linear losses to ∼0.2 dB/cm. Characterization of the nonlinear parameters reveals values in good agreement with previous measurements of single-crystal silicon. By exploiting the long lengths and low losses, an on–off Raman gain up to 9 dB was obtained when pumping with a continuous wave power of only <0.1 W. The high Raman gain achieved in this work highlights the potential of using these fibers for compact nonlinear signal amplification or laser systems.


  • Open Access

    Low loss polycrystalline SiGe core fibers for nonlinear photonics

    by Amar Nath Ghosh, Meng Huang, Thomas W. Hawkins, John Ballato, Ursula J. Gibson, Anna C. Peacock

    Polycrystalline silicon-germanium (SiGe) core fibers offer great potential as flexible platforms for microscale optoelectronic and nonlinear optical devices. Compared to silicon (Si) core fibers, the SiGe material provides the potential for higher nonlinear coefficients, extended mid-infrared wavelength coverage, and a means to tune the bandgap and index of refraction by varying the Ge composition. Here, SiGe core fibers (10 at% Ge) were fabricated using the molten core drawing method, followed by CO2 laser irradiation to improve the homogeneity of the core. The transmission properties of the fibers were further optimized using a fiber tapering method to tailor the core diameter and re-grow the crystal grains. The resulting tapered SiGe fiber exhibited an average linear loss of ∼3 dB cm−1 across the wavelength range 1.5 − 2.5 µm, allowing for nonlinear optical characterization of this new fiber type. Measurements of the nonlinear figure of merit demonstrate the potential for higher nonlinear performance compared to the pure Si core fibers, particularly for wavelengths >2 µm, indicating that the SiGe fiber platform could open up new opportunities for mid-infrared nonlinear photonics.

  • Open Access

    Low-temperature polycrystalline silicon waveguides for low loss transmission in the near-to-mid-infrared region

    by Amar Nath Ghosh, Stuart J. Macfarquhar, Ozan Aktas, Than Singh Saini, Swe Z. Oo, Harold M. H. Chong, Anna C. Peacock

    Low-temperature deposited polycrystalline silicon waveguides are emerging as a flexible platform that allows for dense optoelectronic integration. Here, the optical transmission properties of poly-silicon waveguides have been characterized from the near-to-mid-infrared wavelength regime, extending the optical transmission well beyond previous reports in the telecom band. The poly-Si waveguides with a dimension of 3 µm × ∼0.6 µm have been produced from pre-patterned amorphous silicon waveguides that are post-processed through laser melting, reflowing, and crystallization using a highly localized laser induced heat treatment at a wavelength of 532 nm. Low optical transmission losses (−1) have been observed at 1.55 µm as well as across the wavelength range of 2−2.25 µm, aided by the relatively large waveguide heights that are enabled by the deposition process. The results demonstrate the suitability of low-temperature poly-silicon waveguides to find wide ranging applications within integrated mid-infrared systems.


  • Noise in supercontinuum generated using PM and non-PM tellurite glass all-normal dispersion fibers

    by Shreesha Rao D. S., Tanvi Karpate, Amar Nath Ghosh, Iván B. Gonzalo, Mariusz Klimczak, Dariusz Pysz, Ryszard Buczyński, Cyril Billet, Ole Bang, John M. Dudley, et al.

    Intensity fluctuations in supercontinuum generation are studied in polarization-maintaining (PM) and non-PM all-normal dispersion tellurite photonic crystal fibers. Dispersive Fourier transformation is used to resolve the shot-to-shot spectra generated using 225-fs pump pulses at 1.55 μ m, with experimental results well reproduced by vector and scalar numerical simulations. By comparing the relative intensity noise for the PM and non-PM cases, supported by simulations, we demonstrate the advantage of the polarization-maintaining property of the PM fibers in preserving low-noise dynamics. We associate the low-noise in the PM case with the suppression of polarization modulation instability.


  • Top Cited Papers

    Recent advances in supercontinuum generation in specialty optical fibers [Invited]

    by T. Sylvestre, E. Genier, A. N. Ghosh, P. Bowen, G. Genty, J. Troles, A. Mussot, A. C. Peacock, M. Klimczak, A. M. Heidt, et al.

    The physics and applications of fiber-based supercontinuum (SC) sources have been a subject of intense interest over the last decade, with significant impact on both basic science and industry. New uses for SC sources are also constantly emerging due to their unique properties that combine high brightness, multi-octave frequency bandwidth, fiber delivery, and single-mode output. The last few years have seen significant research efforts focused on extending the wavelength coverage of SC sources towards the 2 to 20 µ m molecular fingerprint mid-infrared (MIR) region and in the ultraviolet (UV) down to 100 nm, while also improving stability, noise and coherence, output power, and polarization properties. Here we review a selection of recent advances in SC generation in a range of specialty optical fibers, including fluoride, chalcogenide, telluride, and silicon-core fibers for the MIR; UV-grade silica fibers and gas-filled hollow-core fibers for the UV range; and all-normal dispersion fibers for ultralow-noise coherent SC generation.


  • Open Access

    Chalcogenide-glass polarization-maintaining photonic crystal fiber for mid-infrared supercontinuum generation

    by A N Ghosh, M Meneghetti, C R Petersen, O Bang, L Brilland, S Venck, J Troles, J M Dudley, T Sylvestre

    In this paper, we report the design and fabrication of a highly birefringent polarization-maintaining photonic crystal fiber made from chalcogenide glass, and its application to linearly-polarized supercontinuum generation in the mid-infrared region. The fiber was drawn using the casting method from As38Se62 glass which features a transmission window from 2 to 10 μm and a high nonlinear index of 1.13 × 10–17 m2 W−1. It has a zero-dispersion wavelength (ZDW) at 4.56 μm for the fast axis and 4.68 μm for the slow axis and, at average ZDW, a large birefringence of 6.5 × 10–4 and consequently strong polarization maintaining properties are expected. Using this fiber, we experimentally demonstrate supercontinuum generation spanning from 3.1 to 6.02 μm and 3.33–5.78 μm using femtosecond pumping at 4 μm and 4.53 μm, respectively. We further investigate the supercontinuum bandwidth versus the input pump polarization angle and we show very good agreement with numerical simulations of the two-polarization model based on two coupled generalized nonlinear Schrödinger equations.


  • Open Access

    Nested capillary anti-resonant silica fiber with mid-infrared transmission and low bending sensitivity at 4000 nm

    by Mariusz Klimczak, Dominik Dobrakowski, Amar Nath Ghosh, Grzegorz Stępniewski, Dariusz Pysz, Guillaume Huss, Thibaut Sylvestre, Ryszard Buczyński

    We report a silica glass nested capillary anti-resonant nodeless fiber with transmission and low bending sensitivity in the mid-infrared around 4000 nm. The fiber is characterized in terms of transmission over 1700–4200 nm wavelengths, revealing a mid-infrared 3500–4200 nm transmission window, clearly observable for a 12 m long fiber. Bending loss around 4000 nm is 0.5 dB/m measured over three full turns with 40 mm radius, going up to 5 dB/m for full turns with 15 mm radius. Our results provide experimental evidence of hollow-core silica fibers in which nested, anti-resonant capillaries provide high bend resistance in the mid-infrared. This is obtained for a fiber with a large core diameter of over 60 μm relative to around 30 μm capillaries in the cladding, which motivates its application in gas fiber lasers or fiber-based mid-infrared spectroscopy of COx or NxO analytes.


  • Open Access

    Chalcogenide-glass polarization-maintaining photonic crystal fiber for mid-infrared supercontinuum generation

    by A. N. Ghosh, M. Meneghetti, C. R. Petersen, O. Bang, L. Brilland, S. Venck, J. Troles, J. M. Dudley, T. Sylvestre

    In this paper, we report the design and fabrication of a highly birefringent polarization-maintaining photonic crystal fiber (PM-PCF) made from chalcogenide glass, and its application to linearly-polarized supercontinuum (SC) generation in the mid-infrared region. The PM fiber was drawn using the casting method from As38Se62 glass which features a transmission window from 2 to 10 $\mu m$ and a high nonlinear index of 1.13.10$^{-17}$m$^{2}$W$^{-1}$. It has a zero-dispersion wavelength around 4.5 $\mu m$ and, at this wavelength, a large birefringence of 6.10$^{-4}$ and consequently strong polarization maintaining properties are expected. Using this fiber, we experimentally demonstrate supercontinuum generation spanning from 3.1-6.02 $\mu m$ and 3.33-5.78 $\mu m$ using femtosecond pumping at 4 $\mu m$ and 4.53 $\mu m$, respectively. We further investigate the supercontinuum bandwidth versus the input pump polarization angle and we show very good agreement with numerical simulations of the two-polarization model based on two coupled generalized nonlinear Schr\"odinger equations.


  • Supercontinuum generation in heavy-metal oxide glass based suspended-core photonic crystal fibers

    by A. N. Ghosh, M. Klimczak, R. Buczynski, J. M. Dudley, T. Sylvestre

    In this paper we investigate supercontinuum generation in several suspended-core soft-glass photonic crystal fibers pumped by an optical parametric oscillator tunable around 1550 nm. The fibers were drawn from lead-bismuth-gallium-cadmium-oxide glass (PBG-81) featuring a wide transmission window from 0.5 to 2.7 μm and a high nonlinear refractive index up to 4.3·1019  m2/W. They have been specifically designed with a microscale suspended hexagonal core for efficient supercontinuum generation around 1550 nm. We experimentally demonstrate two supercontinuum spectra spanning from 1.07 to 2.31 μm and 0.89 to 2.46 μm by pumping two PCFs in both normal and anomalous dispersion regimes, respectively. We also numerically model the group velocity dispersion curves for these fibers from their scanning electron microscope images. The results are in good agreement with numerical simulations based on the generalized nonlinear Schrödinger equation including the pump frequency chirp.