Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Mehmet Hakan Morcali has a total of 73 co-authors. Here are the top co-authors by number of shared publications:

  • O. Yucel

    Faculty of Chemical and Metallurgical Engineering , Istanbul Technical University , Istanbul , Turkey

    7 shared publications
  • Bihter Zeytuncu

    Applied Research Center of Materials Science and Production Technology, Istanbul Technical University, Maslak, 34469 Istanbul, Turkey

    6 shared publications
  • B. Zeytuncu

    Faculty of Chemical and Metallurgical Engineering , Istanbul Technical University , Istanbul , Turkey

    5 shared publications
  • Onuralp Yucel

    Faculty of Chemical and Metallurgical Engineering, Istanbul Technical University, Maslak, 34469 Istanbul, Turkey, Tel. +90 543 769 67 15; Fax: +90 212 285 34 27

    5 shared publications
  • Serdar Aktas

    5 shared publications
  • Serdar Aktaş

    Adnan Menderes Üniversitesi

    5 shared publications

Latest Publications

  • Heavy metal distribution in soils and plants collected from earthquake-affected regions of Turkey: a comparative assessment of Hypericum perforatum L. and Capsicum annuum L.

    by Bahar Sürmelihindi, Başak Gökpinar, Mehmet Hakan Morcali, Yusuf Yilmaz, Mehmet Emrah Aksan, Ferudun Koçer, Semiye Burçin Karakoç, Nazim Şekeroğlu

  • Fen Bi̇li̇mleri̇nde Di̇si̇pli̇nlerarası Yaklaşımlar ve Sürdürülebi̇li̇r Enerji̇ Teknoloji̇leri̇ndeki̇ Güncel Eği̇li̇mler

    by Gülbahar Bilgiç Tüzemen, Ahmet Oral Sarıoğlu, Ayhan Atız, Aslıhan Sökmen, Kemal Volkan Özdokur, Mehmet Hakan Morcalı

    Bu kitap, fen bilimleri alanlarında yürütülen özgün araştırmaları bir araya getirerek, bilim dünyasına katkıda bulunmayı ve gelecek nesillere yol göstermeyi amaçlamaktadır. Kitapta yer alan çalışmalar; fen bilimleri alanında yapılan çalışmaların farklı disiplinler ile nasıl iç içe geçtiğini göstermekte ve sürdürülebilir enerji teknolojilerinde kullanılan yöntemler hakkında geniş bir bilgi yelpazesi sunmaktadır. Her bir bölüm, kendi alanında özgün bulgular sunmakla kalmayıp aynı zamanda sürdürülebilirlik konusunda tavsiyeler içermektedir.

  • Open Access

    Gold extraction from oxide gold ores through glycine leaching

    by Ahmet Turan, Mehmet Baris Daryal, Mehmet Hakan Morcali, Umay Cinarli Yavas

    The use of glycine, a non-toxic and simple amino acid, has gained attention for gold extraction because of its selective dissolution of precious metals. This study explores gold extraction from oxide gold ore using non-analytical grade glycine at concentrations of 1-3 M and reaction times ranging from 4 to 60 hours. The pH was maintained at 11-12, with the reactor temperature set at 60 °C, a stirring speed of 350 rpm, and an air flow rate of 1 L·min-1. The ore's particle size averaged 70.7 μm. The highest gold extraction (81.41%) occurred at 3 M glycine after 48 hours. Silver extraction was moderate, reaching 44.50%, while iron solubility was low at 7.71%. The results show that increased reaction time and glycine concentration enhance gold dissolution from oxide ore. This glycine-based process offers a more environmentally friendly and sustainable approach for selective extraction of gold and silver from oxide ores or oxidized waste containing precious metals.


  • BÖLGESEL OLARAK TOPLANAN ATIK Lİ-İYON PİLLERİNİN GERİ DÖNÜŞÜMÜNDE İÇERİK VE MALİYET ANALİZLERİNİN BELİRLENMESİ

    by Hasan Aksu, Cengiz Ayhan Ziba, Mehmet Hakan Morcali

    Her geçen gün taşınabilir enerjiye olan ihtiyacımız artmaktadır. Modern hayatın vazgeçilmezi olan piller iletişim çağında çok daha fazla önem kazanmaktadır. Dolayısıyla kısa sürede çok fazla enerji depolama özelliğine sahip pillere ihtiyaç duyulmaktadır. Bu ihtiyacımız ise Li-iyon piller ile karşılanmaktadır. Elbette hızlı bir tüketim toplumunun oluşması ile artan pil kullanımı çevre ve insan sağlığı için potansiyel bir tehlike oluşturmaktadır. Kullanım ömrünü doldurmuş pillerin çevreye gelişi güzel bırakılması ciddi metal kirliliklerine sebep olmakla birlikte içeriğindeki ekonomik değeri olan malzemelerden dolayı da ciddi ekonomik kayıplar mevcuttur Bu çalışmada, İstanbul ili Ümraniye ilçesi Namık Kemal mahallesi sınırları içerisinde 12 atık pil toplama noktası belirlenmiş ve üç aylık süre içerisinde bu noktalarda toplanan kullanım ömrünü doldurmuş piller’ sınıflandırılmış ve bileşenleri incelenmiştir. Bu süre içerisinde toplanan 110 adet Li-iyon pillinin ortalama kompozisyonu %20 Cu (Bakır), %8 Al (Alüminyum), %10 plastik, %55 pil pastası (LiCoO2) ve %7 diğerleri olarak belirlenmiştir. Çalışmada elde edilen metal ve plastik parçaların geri dönüşümde kullanılabilirliği görülmüş olup pil pastasının ise tekrardan kullanılabilirliği için bir takım spektroskopik analizler yapılmıştır. XRD ve XRF analizleri ile desteklenen SEM-EDX analizlerinden görüldüğü üzere katot malzemesi olarak kullanılan Li-metal oksit bileşiklerine birçok defa şarj ve deşarj işleminin uygulanması sırasında, bu bileşiğin katotdan anoda ve tam tersi olarak sürekli göç etmesi sırasında bileşikteki morfolojik yapı bozulmaktadır. Kullanılmış (bitmiş) Li-iyon pillere ait pil pastasının doğrudan ve/veya bir takım basit işlemler uygulanarak tekrardan kullanılabilmesi mümkün görünmemektedir. Pil pastasının tekrardan kullanılabilirliğini sağlanması için çok basamaklı kimyasal süreçlere ihtiyaç duyulmaktadır. Toplanan Li-iyon piller için ekonomik değer çalışması yapılmış ve atık bitmiş pillerin toplanarak ekonomiye kazandırılmasının önemi belirtilmiştir.

  • Comparison of the Antimony Cementation from Chloride Media Using Various Cementators

    by Özgün Küçükoğlu, Burcu Nilgün Çetiner, Mehmet Hakan Morcalı, Serdar Aktaş


  • Open Access

    Non-diaphragm electrodeposition of antimony: Effect of process parameters and precipitating agents

    by M.H. Morcali, Ö. Küçükoğlu, B.N. Çetiner, S. Aktaş

    Metallic antimony production from antimony-bearing materials is a research hotspot. The conventional electrowinning technology of antimony is a challenging problem due to the sulfur compounds that come from both the ore itself and the leaching solution in the electrolysis system. The electro-production of antimony in modified non-diaphragm cells is of interest because of the high price and maintenance issues associated with diaphragm cells. A sulfur-based problem in non-diaphragm cells was the focus of this study, which investigated the effects of various salts on this problem and also optimized antimony production conditions. Various salts (i.e., BaCl2, CaCl2, Ba(OH)2, Ca(OH)2) were used as a precipitating agent for the formation of insoluble salts (BaSO4/CaSO4 and BaSO3/CaSO3). Sb concentration, amount of NaOH and Na2S in the bath, electrowinning time, and temperature were investigated to optimize reaction parameters. The Taguchi experimental design was used to determine the effect of each factor on the Sb deposition. The phases and structures formed during electroproduction were identified with the help of various measurement techniques. This study found that in the presence of 96 mM BaCl2, 45 g/L of Sb concentration, 100 g/L of NaOH, and 60 g/L of Na2S were the most suitable factors. It was found that 40 oC was the optimal electrowinning temperature. This result also demonstrated that increasing concentrations of BaCl2 reduced specific energy consumption.


  • A cleaner application on hydrogen sulfide

    by Merve Aksu, M.HAkan Morcali̇

    With the increasing industrial production, there was a significant number of toxic and harmful hydrogen sulfide (H2S) gas generated. Due to the industrial activities, converting H2S gas from the waste of industrial process is environmentally attractive. This paper focuses on the conversion of H2S to elemental sulfur (S°) and other sulfur species (i.e., sulfite ion (SO32-); sulfate ion (SO42-) using Fenton reagent. The effects of some reaction parameters such as Fe2+ ion concentration, amount of hydrogen peroxide (H2O2), reaction time, initial H2S concentration and, liquid-gas ratio on H2S conversion percentage were explored thoroughly. The results revealed that the increase of the Fe2+ ion concentration and H2O2 quantity could promote the conversion of H2S. Besides, the comparable results were recorded for each reaction parameter. An apparent positive effect was observed with increasing the amount of H2O2 on H2S conversion. However, the conversion percentage was decreased while increased in the initial concentration of the H2S in the Fenton reactor. It was well accepted that the main conversion pathway of H2S was hydroxyl radical (•OH). Additionally, the oxidative reaction of H2O2 on H2S is thought another removal pathway. The expected products are sulphuric acid and S°.


  • Valorization of Chicken Feather Waste: Fabrication of Keratin‐Chitosan Biofilms

    by Mediha Gül Çelik, M. Hakan Morcali, Cengiz Ayhan Ziba, Mustafa Dolaz

    According to scientists, keratin is one of the most abundant fibrous materials in nature after cellulose and chitin in the world. Several nature fibrous materials have a wide range of application starting from biomedical application to the construction sector, and especially the textile sector. The uses of natural fibers in these sectors are economical for increasing their specific properties, such as antibacterial properties, flexibility, tensile strength, shear strength, toughness, etc. This paper presented a new type of keratin‐chitosan biofilms with the separation of keratin from waste chicken feathers. The laboratory‐scale keratin extraction process was designed. The keratin extraction percentage of different lixiviants (NaOH; NaOH+Na 2 S; Na 2 S) were studied and compared each other to understand the reaction process. The chosen reaction parameters were lixiviant concentration, reaction time, and temperature in an attempt to figure out their effects on the extraction of keratin. The highest extraction value was achieved at 60 °C and 400 rpm for 6 h, and 0.5 M Na 2 S per 5 g of chicken feather powder. After obtaining keratin powder from the chicken feather powder, the keratin and chitosan powders were mixed in a certain ratio. Afterwards the polyvinyl alcohol was added into the mixture of keratin and chitosan at 100 °C until forming the biofilms. The properties and structure of the biofilms were characterized and antibacterial properties of films were examined. Owing to its enormous extraction performance using common and cheap chemicals and simple equipment at ambient conditions, the pile processing method has great promise for the keratin bio‐waste's industrially.


  • Investigation of Iron Matte Containing PGMs Leaching under Oxidative Conditions

    by M.Hakan Morcali̇, Merve Aksu

    Özellikle kara taşıtlarında fosil bazlı yakıtların yakılması sonucu oluşan tehlikeli gazların (CO, NOx, hidrokarbon (HC)) daha az zararlı gazlara (CO2, N2, H2O) dönüştürülmesinde katalitik dönüştürücüler kullanılmaktadır. Bu kimyasal dönüşüm platin grubu metaller (PGM) varlığında çok kısa sürede yüksek verimle gerçekleşmektedir. Dünya’da PGM konusunda yaşanan arz-talep dengesizliği sebebiyle her türlü PGM ihtiva eden atıktan değerli metallerin geri kazanımı çok büyük önem arz etmektedir. Bu bilimsel çalışmada, katalitik dönüştürücülerden katı-katı ekstraksiyon yoluyla PGM’lerin bünyesinde zenginleştirildiği demir matının çözeltiye alınma şartlarının belirlenmesi amacıyla hidroklorik asit varlığında farklı oksidanlar (ozon(O3) ve oksijen(O2)) kullanarak çözümlendirme şartları araştırılmıştır. En iyi deney şartlarının belirlenmesi için oksidan türü, oksidan miktarı, çözücü konsantrasyonu, karıştırma hızı ve reaksiyon sıcaklığı parametreleri incelenerek deneyler gerçekleştirilmiştir. %95 üzerinde verim; 5 gr örnek 4 M HCl 200 mL ile 50 mg O3/dakika ve 800 devir/dakika reaksiyon şartlarında 12 saat süre sonunda 60°C reaksiyon sıcaklığında elde edilebilmiştir. Deneylerin gerçekleştirildiği basamaklarda hammadde XRD analizi ile karakterize edilerek deneyde kullanılan hammaddenin yapısı aydınlatılmıştır. Çözünmeden geri kalan malzeme SEM-EDS yöntemi karakterize edilerek liç işlemi sonrası kalan yapı belirlenmiştir.