Mykola Ialovega
Research Subjects
Mykola Ialovega has a total of 55 co-authors. Here are the top co-authors by number of shared publications:
- Arkadi Kreter
Forschungszentrum Jülich GmbH, IEK-4, 52425 Jülich, Germany
5 shared publications - Regis Bisson
Aix Marseille Univ., CNRS, PIIM, UMR 7345, 13013 Marseille, France
5 shared publications Thierry Angot
Aix Marseille Univ., CNRS, PIIM, UMR 7345, 13013 Marseille, France
4 shared publications- Celine Martin
Aix-Marseille University, CNRS, PIIM, Marseille, France
3 shared publications - Oliver Schmitz
University of Wisconsin-Madison
3 shared publications Andrea Campos
Aix Marseille Univ., CNRS, Centrale Marseille, FSCM (FR1739), CP2M, 13397 Marseille, France
2 shared publications
Latest Publications
- 4 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Surface conditions of tungsten components : impact on hydrogen inventory
Influence des conditions de surface sur le piégeage de l'hydrogène dans le tungstène: La rétention des isotopes de l’hydrogène (HI) et de l’hélium (He) dans les composants de la première paroi (PFC) est un enjeu majeur pour les futurs réacteurs tels ITER et DEMO, les conditions d’exposition au plasma de fusion pouvant entrainer la dégradation des matériaux. Les propriétés du tungstène (W), ont entrainés son choix pour le divertor d’ITER: lors des phases deutérium/tritium, les PFC W seront soumis à d’intenses flux de particules, HI, He, neutrons ou encore impuretés issues du plasma de bord. L’impact de l’He est particulièrement problématique, avec un endommagement significatif de la zone de proche surface dans le W: création de boucles de dislocations, bulles, ou W-fuzz. En outre, en présence d’oxygène résiduel, une oxydation de surface est possible du fait de la température élevée du divertor. La modification de la structure du W peut considérablement modifier les propriétés du matériau, et donc son espérance de vie face au plasma, ainsi que sa rétention en hydrogène, ce qui pose un problème de sureté dans le cas du tritium, qui est radioactif. Cette thèse a permis d’étudier les mécanismes fondamentaux du piégeage et la rétention de HI dans le W, grâce notamment à l’implantation par faisceau d’ions et la spectroscopie par thermo desorption (TDS), en fonction de différents états de surface: - Présence d’une couche d’oxide en surface d’un W polycristallin, formées dans des conditions pertinentes pour ITER; - Présence des modifications liées à une exposition à l’He proches de celles attendues dans ITER. Les mesures TDS ont été couplées avec des observations de microscopie afin de caractériser les modifications dans la surface et la structure du matériau
- 4 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Surface conditions of tungsten components : impact on hydrogen inventory
Influence des conditions de surface sur le piégeage de l'hydrogène dans le tungstène: La rétention des isotopes de l’hydrogène (HI) et de l’hélium (He) dans les composants de la première paroi (PFC) est un enjeu majeur pour les futurs réacteurs tels ITER et DEMO, les conditions d’exposition au plasma de fusion pouvant entrainer la dégradation des matériaux. Les propriétés du tungstène (W), ont entrainés son choix pour le divertor d’ITER: lors des phases deutérium/tritium, les PFC W seront soumis à d’intenses flux de particules, HI, He, neutrons ou encore impuretés issues du plasma de bord. L’impact de l’He est particulièrement problématique, avec un endommagement significatif de la zone de proche surface dans le W: création de boucles de dislocations, bulles, ou W-fuzz. En outre, en présence d’oxygène résiduel, une oxydation de surface est possible du fait de la température élevée du divertor. La modification de la structure du W peut considérablement modifier les propriétés du matériau, et donc son espérance de vie face au plasma, ainsi que sa rétention en hydrogène, ce qui pose un problème de sureté dans le cas du tritium, qui est radioactif. Cette thèse a permis d’étudier les mécanismes fondamentaux du piégeage et la rétention de HI dans le W, grâce notamment à l’implantation par faisceau d’ions et la spectroscopie par thermo desorption (TDS), en fonction de différents états de surface: - Présence d’une couche d’oxide en surface d’un W polycristallin, formées dans des conditions pertinentes pour ITER; - Présence des modifications liées à une exposition à l’He proches de celles attendues dans ITER. Les mesures TDS ont été couplées avec des observations de microscopie afin de caractériser les modifications dans la surface et la structure du matériau
- Open Access
- 27 June 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (7) , 076042
Deuterium retention in cold spray tantalum coatings vs. polycrystalline tungsten and tantalum
Enhanced deuterium retention in tantalum (Ta) cold spray coatings, compared to reference polycrystalline tantalum and tungsten materials, has been evaluated using the thermal desorption spectrometry technique. Tantalum coatings, deposited via cold spray technology on 316L stainless steel substrates, are proposed as plasma-facing material surfaces with hydrogen gettering functionality for advanced fusion concepts. The materials were exposed to 95 eV D ions at a flux of 1.6– 3.5 × 10 21 D m−2 s−1. Retention was measured as a function of incident ion fluence and surface temperature. The results highlight an increased deuterium inventory in Ta cold spray coatings by a factor of 3.5 compared to polycrystalline tantalum and by two orders of magnitude compared to polycrystalline tungsten. A tendency for retention saturation in tantalum is observed at a fluence above 1 × 10 24 D m−2. While deuterium retention gradually decreases with increasing surface temperature from 400 K to 925 K for polycrystalline tungsten, it remains constant for polycrystalline tantalum. In contrast, retention in Ta coatings significantly decreases when the surface temperature exceeds 750 K. The microstructure of the cold spray Ta coatings plays a crucial role in the dynamics of deuterium trapping and release. Tantalum also exhibits a superior resistance to blister formation compared to tungsten when subjected to a high dose of deuterium.
- 27 June 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (7) , 076042
Open AccessDeuterium retention in cold spray tantalum coatings vs. polycrystalline tungsten and tantalum
Enhanced deuterium retention in tantalum (Ta) cold spray coatings, compared to reference polycrystalline tantalum and tungsten materials, has been evaluated using the thermal desorption spectrometry technique. Tantalum coatings, deposited via cold spray technology on 316L stainless steel substrates, are proposed as plasma-facing material surfaces with hydrogen gettering functionality for advanced fusion concepts. The materials were exposed to 95 eV D ions at a flux of 1.6– 3.5 × 10 21 D m−2 s−1. Retention was measured as a function of incident ion fluence and surface temperature. The results highlight an increased deuterium inventory in Ta cold spray coatings by a factor of 3.5 compared to polycrystalline tantalum and by two orders of magnitude compared to polycrystalline tungsten. A tendency for retention saturation in tantalum is observed at a fluence above 1 × 10 24 D m−2. While deuterium retention gradually decreases with increasing surface temperature from 400 K to 925 K for polycrystalline tungsten, it remains constant for polycrystalline tantalum. In contrast, retention in Ta coatings significantly decreases when the surface temperature exceeds 750 K. The microstructure of the cold spray Ta coatings plays a crucial role in the dynamics of deuterium trapping and release. Tantalum also exhibits a superior resistance to blister formation compared to tungsten when subjected to a high dose of deuterium.
- Open Access
- 13 June 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (7) , 076024
Deuterium retention in tungsten oxide: the role of oxide damage
Tungsten (W) is a common plasma-facing material in nuclear fusion devices. It readily oxidizes in the presence of oxygen, forming tungsten oxides, particularly WO3, which may modify deuterium retention. This experimental study investigates mechanisms of the evolution of deuterium retention in a thermally stable ∼ 100 nm WO3 layer grown by thermal oxidation of a W substrate at 1073 K under low pure oxygen pressure of 7 Pa. 500 eV D 2 + deuterium implantation and Temperature Programmed Desorption (TPD) were used to explore deuterium trapping and release from the oxide as a function of incident ion fluence and storage time in ultra high vacuum. Upon deuterium irradiation, the formation of a W-rich layer on the surface of the oxide is evidenced with x-ray photoelectron spectroscopy. After successive implantation/TPD cycles corresponding to an accumulated deuterium fluence > 10 21 D m−2, the appearance of an amorphous oxide encapsulated between two W-rich layers is observed with transmission electron microscopy. Following this high fluence deuterium implantation, deuterium retention increases by a factor of 10. The findings provide insight into the behavior of tungsten oxides under deuterium implantation, emphasizing the importance of considering its thermal stability and its structural modifications at the surface of tungsten plasma facing components.
- 13 June 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (7) , 076024
Open AccessDeuterium retention in tungsten oxide: the role of oxide damage
Tungsten (W) is a common plasma-facing material in nuclear fusion devices. It readily oxidizes in the presence of oxygen, forming tungsten oxides, particularly WO3, which may modify deuterium retention. This experimental study investigates mechanisms of the evolution of deuterium retention in a thermally stable ∼ 100 nm WO3 layer grown by thermal oxidation of a W substrate at 1073 K under low pure oxygen pressure of 7 Pa. 500 eV D 2 + deuterium implantation and Temperature Programmed Desorption (TPD) were used to explore deuterium trapping and release from the oxide as a function of incident ion fluence and storage time in ultra high vacuum. Upon deuterium irradiation, the formation of a W-rich layer on the surface of the oxide is evidenced with x-ray photoelectron spectroscopy. After successive implantation/TPD cycles corresponding to an accumulated deuterium fluence > 10 21 D m−2, the appearance of an amorphous oxide encapsulated between two W-rich layers is observed with transmission electron microscopy. Following this high fluence deuterium implantation, deuterium retention increases by a factor of 10. The findings provide insight into the behavior of tungsten oxides under deuterium implantation, emphasizing the importance of considering its thermal stability and its structural modifications at the surface of tungsten plasma facing components.
- Open Access
- 17 October 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (11) , 115611
Initial study on thermal stability of cold spray tantalum coating irradiated with deuterium for fusion applications
Removal of neutral hydrogen atoms in the plasma edge reduces the number of charge exchange events and thus, the net energy losses in the plasma, significantly improving performance of fusion devices. Effective control of the residual pressure of hydrogen isotopes (HIs) in the plasma edge may be achieved by utilizing a hydrogen absorbing first wall interface capable of withstanding the harsh fusion environment. In this study, we have investigated tantalum (Ta) coating deposited by cold spray technology on 316L stainless steel substrate as a potential plasma-facing material surface. High fluence low energy deuterium plasma irradiation experiments and subsequent thermal annealing cycles associated with thermal desorption spectrometry (TDS) demonstrated superior structural stability of the Ta coating. TDS experiments revealed the outgassing of deuterium (as measure of its retention) for cold spray Ta coatings to be three times higher than bulk Ta and two orders of magnitude greater than bulk polycrystalline W. X-ray photoelectron spectroscopy revealed evolution of oxidation states upon deuterium irradiation and a partial recovery of the metallic signature of Ta after the thermal treatment at 1100 K.
- 17 October 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (11) , 115611
Open AccessInitial study on thermal stability of cold spray tantalum coating irradiated with deuterium for fusion applications
Removal of neutral hydrogen atoms in the plasma edge reduces the number of charge exchange events and thus, the net energy losses in the plasma, significantly improving performance of fusion devices. Effective control of the residual pressure of hydrogen isotopes (HIs) in the plasma edge may be achieved by utilizing a hydrogen absorbing first wall interface capable of withstanding the harsh fusion environment. In this study, we have investigated tantalum (Ta) coating deposited by cold spray technology on 316L stainless steel substrate as a potential plasma-facing material surface. High fluence low energy deuterium plasma irradiation experiments and subsequent thermal annealing cycles associated with thermal desorption spectrometry (TDS) demonstrated superior structural stability of the Ta coating. TDS experiments revealed the outgassing of deuterium (as measure of its retention) for cold spray Ta coatings to be three times higher than bulk Ta and two orders of magnitude greater than bulk polycrystalline W. X-ray photoelectron spectroscopy revealed evolution of oxidation states upon deuterium irradiation and a partial recovery of the metallic signature of Ta after the thermal treatment at 1100 K.
- Top Cited PapersOpen Access
- 20 September 2023
- Published by Cambridge University Press (CUP) in Journal of Plasma Physics
- Vol. 89 (5) , 975890501
Physics basis for the Wisconsin HTS Axisymmetric Mirror (WHAM)
The Wisconsin high-temperature superconductor axisymmetric mirror experiment (WHAM) will be a high-field platform for prototyping technologies, validating interchange stabilization techniques and benchmarking numerical code performance, enabling the next step up to reactor parameters. A detailed overview of the experimental apparatus and its various subsystems is presented. WHAM will use electron cyclotron heating to ionize and build a dense target plasma for neutral beam injection of fast ions, stabilized by edge-biased sheared flow. At 25 keV injection energies, charge exchange dominates over impact ionization and limits the effectiveness of neutral beam injection fuelling. This paper outlines an iterative technique for self-consistently predicting the neutral beam driven anisotropic ion distribution and its role in the finite beta equilibrium. Beginning with recent work by Egedalet al.(Nucl. Fusion, vol. 62, no. 12, 2022, p. 126053) on the WHAM geometry, we detail how the FIDASIM code is used to model the charge exchange sources and sinks in the distribution function, and both are combined with an anisotropic magnetohydrodynamic equilibrium solver method to self-consistently reach an equilibrium. We compare this with recent results using the CQL3D code adapted for the mirror geometry, which includes the high-harmonic fast wave heating of fast ions.
- 20 September 2023
- Published by Cambridge University Press (CUP) in Journal of Plasma Physics
- Vol. 89 (5) , 975890501
Top Cited PapersOpen AccessPhysics basis for the Wisconsin HTS Axisymmetric Mirror (WHAM)
The Wisconsin high-temperature superconductor axisymmetric mirror experiment (WHAM) will be a high-field platform for prototyping technologies, validating interchange stabilization techniques and benchmarking numerical code performance, enabling the next step up to reactor parameters. A detailed overview of the experimental apparatus and its various subsystems is presented. WHAM will use electron cyclotron heating to ionize and build a dense target plasma for neutral beam injection of fast ions, stabilized by edge-biased sheared flow. At 25 keV injection energies, charge exchange dominates over impact ionization and limits the effectiveness of neutral beam injection fuelling. This paper outlines an iterative technique for self-consistently predicting the neutral beam driven anisotropic ion distribution and its role in the finite beta equilibrium. Beginning with recent work by Egedalet al.(Nucl. Fusion, vol. 62, no. 12, 2022, p. 126053) on the WHAM geometry, we detail how the FIDASIM code is used to model the charge exchange sources and sinks in the distribution function, and both are combined with an anisotropic magnetohydrodynamic equilibrium solver method to self-consistently reach an equilibrium. We compare this with recent results using the CQL3D code adapted for the mirror geometry, which includes the high-harmonic fast wave heating of fast ions.
- 14 October 2022
- Published by IOP Publishing in Nuclear Fusion
- Vol. 62 (12) , 126022
Helium-induced morphology evolution in tungsten under thermal treatment
Surface and near-surface morphology evolution of helium-irradiated tungsten due to thermal cycling up to the ITER-relevant temperature of 1350 K was studied using electron microscopy and positron annihilation spectroscopy techniques. Holes at the surface and bubbles in the near-surface of recrystallized polycrystalline tungsten samples were created by 75 eV helium plasma irradiation with the fluence of 3 × 1023 He m−2 at the surface temperature of 1073 K. Subsequent annealing experiments were combined with a detailed electron microscopy analysis to investigate the shape and density changes of holes and helium bubbles with respect to grain orientation. We show that the initially circular holes and round bubbles became faceted upon heating with 1 K s−1 ramp up to 870 K. Annealing cycles up to 1350 K induced resulted in bubbles removal in the first 5 nm below the surface and surface smoothing. Electron energy loss spectroscopy measurements allowed estimation of helium gas density and pressure inside bubbles. Positron annihilation spectroscopy allowed to investigate the nature of defects and their evolution in the helium-irradiated tungsten with thermal cycling.
- 14 October 2022
- Published by IOP Publishing in Nuclear Fusion
- Vol. 62 (12) , 126022
Helium-induced morphology evolution in tungsten under thermal treatment
Surface and near-surface morphology evolution of helium-irradiated tungsten due to thermal cycling up to the ITER-relevant temperature of 1350 K was studied using electron microscopy and positron annihilation spectroscopy techniques. Holes at the surface and bubbles in the near-surface of recrystallized polycrystalline tungsten samples were created by 75 eV helium plasma irradiation with the fluence of 3 × 1023 He m−2 at the surface temperature of 1073 K. Subsequent annealing experiments were combined with a detailed electron microscopy analysis to investigate the shape and density changes of holes and helium bubbles with respect to grain orientation. We show that the initially circular holes and round bubbles became faceted upon heating with 1 K s−1 ramp up to 870 K. Annealing cycles up to 1350 K induced resulted in bubbles removal in the first 5 nm below the surface and surface smoothing. Electron energy loss spectroscopy measurements allowed estimation of helium gas density and pressure inside bubbles. Positron annihilation spectroscopy allowed to investigate the nature of defects and their evolution in the helium-irradiated tungsten with thermal cycling.
- 1 January 2020
- Published by IOP Publishing in Physica Scripta
- Vol. T171 (1) , 014066
Hydrogen trapping in tungsten: impact of helium irradiation and thermal cycling
- 1 January 2020
- Published by IOP Publishing in Physica Scripta
- Vol. T171 (1) , 014066
Hydrogen trapping in tungsten: impact of helium irradiation and thermal cycling
- Open Access
Emission of Fast Hydrogen Atoms in a Low Density Gas Discharge—The Most “Natural” Mirror Laboratory
In this work, we present a new application for the line shapes of emission induced by reflected hydrogen atoms. Optical properties of the solids in contact with the plasma could be effectively measured at the wavelength of Balmer lines: time-resolved measurements of reflectance and polarization properties of mirrors are performed using the wavelength separation of the direct and reflected signals. One uses the Doppler effect of emission of atoms excited by collisions with noble gases, primarily with Ar or with Kr. In spite of a new application of line shapes, the question of the source of the strong signal in the case of Ar exists: the emission observed in the case of the excitation of H or D atoms by Ar exceeds the signal induced by collisions with Kr atoms by a factor of five, and the only available experimental data for the ground state excitation show practically equal cross-sections for both gases in the energy range of 80–200 eV.
Open AccessEmission of Fast Hydrogen Atoms in a Low Density Gas Discharge—The Most “Natural” Mirror Laboratory
In this work, we present a new application for the line shapes of emission induced by reflected hydrogen atoms. Optical properties of the solids in contact with the plasma could be effectively measured at the wavelength of Balmer lines: time-resolved measurements of reflectance and polarization properties of mirrors are performed using the wavelength separation of the direct and reflected signals. One uses the Doppler effect of emission of atoms excited by collisions with noble gases, primarily with Ar or with Kr. In spite of a new application of line shapes, the question of the source of the strong signal in the case of Ar exists: the emission observed in the case of the excitation of H or D atoms by Ar exceeds the signal induced by collisions with Kr atoms by a factor of five, and the only available experimental data for the ground state excitation show practically equal cross-sections for both gases in the energy range of 80–200 eV.
- Open Access
Quantum model of an autonomous oscillator in hard excitation regime
We propose the simple quantum model of nonlinear autonomous oscillator in hard excitation regime. We originate from classical equations of motion for similar oscillator and quantize them using the Lindblad master equation for the density matrix of this system. The solution for the populations of the stationary states of such oscillator may be explicitly found in the case when nonlinearity parameters of the problem are small. It was shown that in this situation there are three distinct regimes of behavior of the model. We compare properties of this model with corresponding ones of close open system, namely quantum oscillator in soft excitation regime. We discuss a possible applications of the results obtained.
Open AccessQuantum model of an autonomous oscillator in hard excitation regime
We propose the simple quantum model of nonlinear autonomous oscillator in hard excitation regime. We originate from classical equations of motion for similar oscillator and quantize them using the Lindblad master equation for the density matrix of this system. The solution for the populations of the stationary states of such oscillator may be explicitly found in the case when nonlinearity parameters of the problem are small. It was shown that in this situation there are three distinct regimes of behavior of the model. We compare properties of this model with corresponding ones of close open system, namely quantum oscillator in soft excitation regime. We discuss a possible applications of the results obtained.