Nico Skibbe
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Nico Skibbe has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Thomas Günther
LIAG Institute for Applied Geophysics, Germany
13 shared publications - Rena Meyer
Carl von Ossietzky Universitat Oldenburg Institut fur Biologie und Umweltwissenschaften
12 shared publications - Gudrun Massmann
Working group Hydrogeology and Landscape Hydrology, Institute of Biology and Environmental Science, Carl von Ossietzky Universität Oldenburg, Germany
10 shared publications - Janek Greskowiak
Carl von Ossietzky University of Oldenburg
10 shared publications Kai Schwalfenberg
Working group Marine Sensor Systems, Institute for Chemistry and Biology of the Marine Environment, Carl von Ossietzky Universität Oldenburg, Oldenburg, Germany
9 shared publications- Mike Müller-Petke
LIAG Institute for Applied Geophysics, Hannover, Germany
8 shared publications
Latest Publications
- Open Access
- 7 April 2026
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 62 (4)
A Multi Tracer Approach Reveals Groundwater Residence Times and Dynamic Endmember Mixing in the Subterranean Estuary of a High Energy Beach
Subterranean estuaries (STEs) under high‐energy conditions function as effective biogeochemical reactors, where waterbodies of varying physico‐chemical properties mix. Chemical reactions within the STE modulate the solute composition of groundwater discharging to the sea providing for example nutrients for plankton growth to coastal ecosystems. Groundwater residence times are fundamental to understanding groundwater flow and transport regimes, and thus to interpreting (bio) geochemical data. The present study aims to exemplarily show for the barrier island Spiekeroog exposed to high energy conditions, how morphological changes of the beach surface imprint on subsurface flow, groundwater age and mixing patterns. To this end, we have combined multiple environmental tracers, including electrical conductivity, apparent tritium‐helium groundwater ages, temperature ( T ) and dissolved silica (Si), obtained over a period of 1.5 years from different depths and locations along a 200 m long cross‐shore transect. The results of apparent groundwater ages, travel times and seawater mixing fractions allowed delineating zones where the different endmembers were prevailing. Recirculating seawater of the upper saline plume (USP), infiltrating near the high water line, was youngest with travel times of days to weeks. Near the dune base, freshwater entering the beach from the islands interior was several years old, subsequently forming the freshwater discharge tube below the USP, and directed toward the discharge zone where decade old brackish groundwater was encountered at depths below 18 m. The results support the interpretation of geochemical data as well as the underlying processes and advance the understanding of the functioning of the biogeochemical reactor in high energy beach systems.
- 7 April 2026
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 62 (4)
Open AccessA Multi Tracer Approach Reveals Groundwater Residence Times and Dynamic Endmember Mixing in the Subterranean Estuary of a High Energy Beach
Subterranean estuaries (STEs) under high‐energy conditions function as effective biogeochemical reactors, where waterbodies of varying physico‐chemical properties mix. Chemical reactions within the STE modulate the solute composition of groundwater discharging to the sea providing for example nutrients for plankton growth to coastal ecosystems. Groundwater residence times are fundamental to understanding groundwater flow and transport regimes, and thus to interpreting (bio) geochemical data. The present study aims to exemplarily show for the barrier island Spiekeroog exposed to high energy conditions, how morphological changes of the beach surface imprint on subsurface flow, groundwater age and mixing patterns. To this end, we have combined multiple environmental tracers, including electrical conductivity, apparent tritium‐helium groundwater ages, temperature ( T ) and dissolved silica (Si), obtained over a period of 1.5 years from different depths and locations along a 200 m long cross‐shore transect. The results of apparent groundwater ages, travel times and seawater mixing fractions allowed delineating zones where the different endmembers were prevailing. Recirculating seawater of the upper saline plume (USP), infiltrating near the high water line, was youngest with travel times of days to weeks. Near the dune base, freshwater entering the beach from the islands interior was several years old, subsequently forming the freshwater discharge tube below the USP, and directed toward the discharge zone where decade old brackish groundwater was encountered at depths below 18 m. The results support the interpretation of geochemical data as well as the underlying processes and advance the understanding of the functioning of the biogeochemical reactor in high energy beach systems.
- Open Access
- 5 February 2026
- Published by Elsevier in Journal of Hydrology
- Vol. 669
Long-term monitoring of a high-energy beach using joint salinity-based inversion of different ERT and sampling data
- 5 February 2026
- Published by Elsevier in Journal of Hydrology
- Vol. 669
Open AccessLong-term monitoring of a high-energy beach using joint salinity-based inversion of different ERT and sampling data
- Open Access
- 26 December 2025
- Published by Wiley
A multi tracer approach reveals groundwater residence times and dynamic endmember mixing in the subterranean estuary of a high energy beach
Subterranean estuaries (STEs) under high-energy conditions function as effective biogeochemical reactors, where waterbodies of varying physico-chemical properties mix. Chemical reactions within the STE modulate the solute composition of groundwater discharging to the sea providing e.g. nutrients for plankton growth to coastal ecosystems. Groundwater residence times are fundamental to understanding groundwater flow and transport regimes, and thus to interpreting (bio)geochemical data. The present study aims to exemplarily show for the barrier island Spiekeroog exposed to high energy conditions, how morphological changes of the beach surface imprint on subsurface flow, groundwater age and mixing patterns. To this end, we have combined multiple environmental tracers, including electrical conductivity, apparent tritium-helium groundwater ages, temperature (T) and dissolved silica (Si), obtained over a period of 1.5 years from different depths and locations along a 200 m long cross-shore transect. The results of apparent groundwater ages, travel times and seawater mixing fractions allowed delineating zones where different endmembers were prevailing. Recirculating seawater of the upper saline plume (USP), infiltrating near the high water line, was youngest with travel times of days to weeks. Near the dune base, freshwater entering the beach from the islands interior was several years old, subsequently forming the freshwater discharge tube below the USP, and directed towards the discharge zone where decade old brackish groundwater was encountered at depths below 18 m. The results support the interpretation of geochemical data as well as the underlying processes and advance the understanding of the functioning of the biogeochemical reactor in high energy beach systems.
- 26 December 2025
- Published by Wiley
Open AccessA multi tracer approach reveals groundwater residence times and dynamic endmember mixing in the subterranean estuary of a high energy beach
Subterranean estuaries (STEs) under high-energy conditions function as effective biogeochemical reactors, where waterbodies of varying physico-chemical properties mix. Chemical reactions within the STE modulate the solute composition of groundwater discharging to the sea providing e.g. nutrients for plankton growth to coastal ecosystems. Groundwater residence times are fundamental to understanding groundwater flow and transport regimes, and thus to interpreting (bio)geochemical data. The present study aims to exemplarily show for the barrier island Spiekeroog exposed to high energy conditions, how morphological changes of the beach surface imprint on subsurface flow, groundwater age and mixing patterns. To this end, we have combined multiple environmental tracers, including electrical conductivity, apparent tritium-helium groundwater ages, temperature (T) and dissolved silica (Si), obtained over a period of 1.5 years from different depths and locations along a 200 m long cross-shore transect. The results of apparent groundwater ages, travel times and seawater mixing fractions allowed delineating zones where different endmembers were prevailing. Recirculating seawater of the upper saline plume (USP), infiltrating near the high water line, was youngest with travel times of days to weeks. Near the dune base, freshwater entering the beach from the islands interior was several years old, subsequently forming the freshwater discharge tube below the USP, and directed towards the discharge zone where decade old brackish groundwater was encountered at depths below 18 m. The results support the interpretation of geochemical data as well as the underlying processes and advance the understanding of the functioning of the biogeochemical reactor in high energy beach systems.
- Open Access
- 12 December 2025
- Published by Copernicus GmbH in Hydrology and Earth System Sciences
- Vol. 29 (23) , 7127-7147
Field-scale modelling reveals dynamic groundwater flow and transport patterns in a high-energy subterranean estuary
Subterranean estuaries (STEs) are biogeochemical reactors modifying the chemistry of salt- and freshwater as they flow through the subsurface sediments. Boundary conditions such as tides, waves, beach morphology, seasonal meteoric groundwater recharge and storm events control endmember mixing and residence time distributions within STEs. These in turn affect biogeochemical reactions and thus elemental fluxes discharging to the ocean via submarine groundwater discharge (SGD). Especially at high-energy beaches exposed to high tidal ranges and high wave energy, boundary conditions are very dynamic and likely imprint on groundwater flow and reactive transport within the STEs. A quantitative understanding of mixing processes and residence time distributions is necessary in order to adequately describe biogeochemical processes and can be achieved with the help of numerical modelling. Yet, transient field-scale modelling approaches calibrated to comprehensive observational data sets are still lacking, in particular for real-world high-energy STEs. In the present study, for the first time a density-dependent groundwater flow and transport model was developed and calibrated for a high-energy beach. The north beach of the barrier island Spiekeroog, northern Germany, thereby served as an example field site exposed to high-energy characteristic boundary conditions. The model was calibrated to a 1.5-year extensive dataset of groundwater heads, salinities, temperatures and 3H He groundwater ages at various shore-perpendicular locations along the beach at depths down to 24 m below ground surface. The calibrated model is able to replicate the principal behaviour of the highly transient system and enabled the identification of hot spots of high temporal variability in the investigated state-variables. The dynamics in salinity are most intense at the in- and exfiltration locations of the tide-induced recirculating seawater. The groundwater age variability was largest seawards of the low tide mark as well as below the deep recirculating seawater cell at around 20–30 m depth near the dunes, where very old freshwater from the islands' freshwater lens mixes with young brackish water from the upper beach. Temperature variations were seasonal and confined to the upper 5–10 m below the beach. Computed saline SGD water fluxes varied considerable on daily and spring-neap time scales, as well as on the longer term, i.e., monthly to yearly time scales. The rather gradual, longer-term changes in flux appear to be mainly controlled by changes in spatial variability of the beach slope. The simulated groundwater age of the fresh SGD component varied between 4 and 25 years, and predominantly depended on the magnitude of saline SGD flux. Overall, the model provided important insights into the dynamics of the flow and transport processes.- 12 December 2025
- Published by Copernicus GmbH in Hydrology and Earth System Sciences
- Vol. 29 (23) , 7127-7147
Open AccessField-scale modelling reveals dynamic groundwater flow and transport patterns in a high-energy subterranean estuary
Subterranean estuaries (STEs) are biogeochemical reactors modifying the chemistry of salt- and freshwater as they flow through the subsurface sediments. Boundary conditions such as tides, waves, beach morphology, seasonal meteoric groundwater recharge and storm events control endmember mixing and residence time distributions within STEs. These in turn affect biogeochemical reactions and thus elemental fluxes discharging to the ocean via submarine groundwater discharge (SGD). Especially at high-energy beaches exposed to high tidal ranges and high wave energy, boundary conditions are very dynamic and likely imprint on groundwater flow and reactive transport within the STEs. A quantitative understanding of mixing processes and residence time distributions is necessary in order to adequately describe biogeochemical processes and can be achieved with the help of numerical modelling. Yet, transient field-scale modelling approaches calibrated to comprehensive observational data sets are still lacking, in particular for real-world high-energy STEs. In the present study, for the first time a density-dependent groundwater flow and transport model was developed and calibrated for a high-energy beach. The north beach of the barrier island Spiekeroog, northern Germany, thereby served as an example field site exposed to high-energy characteristic boundary conditions. The model was calibrated to a 1.5-year extensive dataset of groundwater heads, salinities, temperatures and 3H He groundwater ages at various shore-perpendicular locations along the beach at depths down to 24 m below ground surface. The calibrated model is able to replicate the principal behaviour of the highly transient system and enabled the identification of hot spots of high temporal variability in the investigated state-variables. The dynamics in salinity are most intense at the in- and exfiltration locations of the tide-induced recirculating seawater. The groundwater age variability was largest seawards of the low tide mark as well as below the deep recirculating seawater cell at around 20–30 m depth near the dunes, where very old freshwater from the islands' freshwater lens mixes with young brackish water from the upper beach. Temperature variations were seasonal and confined to the upper 5–10 m below the beach. Computed saline SGD water fluxes varied considerable on daily and spring-neap time scales, as well as on the longer term, i.e., monthly to yearly time scales. The rather gradual, longer-term changes in flux appear to be mainly controlled by changes in spatial variability of the beach slope. The simulated groundwater age of the fresh SGD component varied between 4 and 25 years, and predominantly depended on the magnitude of saline SGD flux. Overall, the model provided important insights into the dynamics of the flow and transport processes. - Open Access
- 2 October 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-30
Reply on RC1
Subterranean estuaries (STEs) are biogeochemical reactors modifying the chemistry of salt- and freshwater as they flow through the subsurface sediments. Boundary conditions such as tides, waves, beach morphology, seasonal meteoric groundwater recharge and storm events control end member mixing and residence time distributions within STEs. These in turn affect biogeochemical reactions and thus elemental fluxes discharging to the ocean via submarine groundwater discharge. Especially at high-energy beaches exposed to high tidal ranges and high wave energy, boundary conditions are very dynamic and likely imprint on groundwater flow and reactive transport within the STEs. A quantitative understanding of mixing processes and residence time distributions is necessary in order to adequately describe biogeochemical processes and can be achieved with the help of numerical modelling. Yet, transient field-scale modelling approaches calibrated to comprehensive observational data sets are still lacking, in particular for real-world high-energy STEs. In the present study, for the first time a density-dependent groundwater flow and transport model was developed and calibrated for a high-energy beach. The north beach of the barrier island Spiekeroog, northern Germany, thereby served as an example field site exposed to high-energy characteristic boundary conditions. The model was calibrated to a 1.5-year extensive dataset of groundwater heads, salinities, temperatures and 3H/He groundwater ages at various cross-shore locations along the beach at depths down to 24 m below ground surface. The calibrated model is able to replicate the principal behaviour of the highly transient system and enabled the identification of temporal variability hotspots. The dynamics in salinity are most intense at the in- and exfiltration locations of the tide-induced recirculating seawater. The groundwater age variability was largest seawards of the low tide mark as well as below the deep recirculating seawater cell at around 20–30 m depth near the dunes, where very old freshwater from the islands’ freshwater lens mixes with young brackish water from the upper beach. Temperature variations were seasonal and confined to the upper 5–10 m below the beach. Overall, the model provided important insights into the dynamics of the flow and transport processes.
- 2 October 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-30
Open AccessReply on RC1
Subterranean estuaries (STEs) are biogeochemical reactors modifying the chemistry of salt- and freshwater as they flow through the subsurface sediments. Boundary conditions such as tides, waves, beach morphology, seasonal meteoric groundwater recharge and storm events control end member mixing and residence time distributions within STEs. These in turn affect biogeochemical reactions and thus elemental fluxes discharging to the ocean via submarine groundwater discharge. Especially at high-energy beaches exposed to high tidal ranges and high wave energy, boundary conditions are very dynamic and likely imprint on groundwater flow and reactive transport within the STEs. A quantitative understanding of mixing processes and residence time distributions is necessary in order to adequately describe biogeochemical processes and can be achieved with the help of numerical modelling. Yet, transient field-scale modelling approaches calibrated to comprehensive observational data sets are still lacking, in particular for real-world high-energy STEs. In the present study, for the first time a density-dependent groundwater flow and transport model was developed and calibrated for a high-energy beach. The north beach of the barrier island Spiekeroog, northern Germany, thereby served as an example field site exposed to high-energy characteristic boundary conditions. The model was calibrated to a 1.5-year extensive dataset of groundwater heads, salinities, temperatures and 3H/He groundwater ages at various cross-shore locations along the beach at depths down to 24 m below ground surface. The calibrated model is able to replicate the principal behaviour of the highly transient system and enabled the identification of temporal variability hotspots. The dynamics in salinity are most intense at the in- and exfiltration locations of the tide-induced recirculating seawater. The groundwater age variability was largest seawards of the low tide mark as well as below the deep recirculating seawater cell at around 20–30 m depth near the dunes, where very old freshwater from the islands’ freshwater lens mixes with young brackish water from the upper beach. Temperature variations were seasonal and confined to the upper 5–10 m below the beach. Overall, the model provided important insights into the dynamics of the flow and transport processes.
- Open Access
- 2 October 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-30
Reply on RC2
Subterranean estuaries (STEs) are biogeochemical reactors modifying the chemistry of salt- and freshwater as they flow through the subsurface sediments. Boundary conditions such as tides, waves, beach morphology, seasonal meteoric groundwater recharge and storm events control end member mixing and residence time distributions within STEs. These in turn affect biogeochemical reactions and thus elemental fluxes discharging to the ocean via submarine groundwater discharge. Especially at high-energy beaches exposed to high tidal ranges and high wave energy, boundary conditions are very dynamic and likely imprint on groundwater flow and reactive transport within the STEs. A quantitative understanding of mixing processes and residence time distributions is necessary in order to adequately describe biogeochemical processes and can be achieved with the help of numerical modelling. Yet, transient field-scale modelling approaches calibrated to comprehensive observational data sets are still lacking, in particular for real-world high-energy STEs. In the present study, for the first time a density-dependent groundwater flow and transport model was developed and calibrated for a high-energy beach. The north beach of the barrier island Spiekeroog, northern Germany, thereby served as an example field site exposed to high-energy characteristic boundary conditions. The model was calibrated to a 1.5-year extensive dataset of groundwater heads, salinities, temperatures and 3H/He groundwater ages at various cross-shore locations along the beach at depths down to 24 m below ground surface. The calibrated model is able to replicate the principal behaviour of the highly transient system and enabled the identification of temporal variability hotspots. The dynamics in salinity are most intense at the in- and exfiltration locations of the tide-induced recirculating seawater. The groundwater age variability was largest seawards of the low tide mark as well as below the deep recirculating seawater cell at around 20–30 m depth near the dunes, where very old freshwater from the islands’ freshwater lens mixes with young brackish water from the upper beach. Temperature variations were seasonal and confined to the upper 5–10 m below the beach. Overall, the model provided important insights into the dynamics of the flow and transport processes.
- 2 October 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-30
Open AccessReply on RC2
Subterranean estuaries (STEs) are biogeochemical reactors modifying the chemistry of salt- and freshwater as they flow through the subsurface sediments. Boundary conditions such as tides, waves, beach morphology, seasonal meteoric groundwater recharge and storm events control end member mixing and residence time distributions within STEs. These in turn affect biogeochemical reactions and thus elemental fluxes discharging to the ocean via submarine groundwater discharge. Especially at high-energy beaches exposed to high tidal ranges and high wave energy, boundary conditions are very dynamic and likely imprint on groundwater flow and reactive transport within the STEs. A quantitative understanding of mixing processes and residence time distributions is necessary in order to adequately describe biogeochemical processes and can be achieved with the help of numerical modelling. Yet, transient field-scale modelling approaches calibrated to comprehensive observational data sets are still lacking, in particular for real-world high-energy STEs. In the present study, for the first time a density-dependent groundwater flow and transport model was developed and calibrated for a high-energy beach. The north beach of the barrier island Spiekeroog, northern Germany, thereby served as an example field site exposed to high-energy characteristic boundary conditions. The model was calibrated to a 1.5-year extensive dataset of groundwater heads, salinities, temperatures and 3H/He groundwater ages at various cross-shore locations along the beach at depths down to 24 m below ground surface. The calibrated model is able to replicate the principal behaviour of the highly transient system and enabled the identification of temporal variability hotspots. The dynamics in salinity are most intense at the in- and exfiltration locations of the tide-induced recirculating seawater. The groundwater age variability was largest seawards of the low tide mark as well as below the deep recirculating seawater cell at around 20–30 m depth near the dunes, where very old freshwater from the islands’ freshwater lens mixes with young brackish water from the upper beach. Temperature variations were seasonal and confined to the upper 5–10 m below the beach. Overall, the model provided important insights into the dynamics of the flow and transport processes.
- Open Access
- 12 September 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-30
Comment on egusphere-2025-3132
Subterranean estuaries (STEs) are biogeochemical reactors modifying the chemistry of salt- and freshwater as they flow through the subsurface sediments. Boundary conditions such as tides, waves, beach morphology, seasonal meteoric groundwater recharge and storm events control end member mixing and residence time distributions within STEs. These in turn affect biogeochemical reactions and thus elemental fluxes discharging to the ocean via submarine groundwater discharge. Especially at high-energy beaches exposed to high tidal ranges and high wave energy, boundary conditions are very dynamic and likely imprint on groundwater flow and reactive transport within the STEs. A quantitative understanding of mixing processes and residence time distributions is necessary in order to adequately describe biogeochemical processes and can be achieved with the help of numerical modelling. Yet, transient field-scale modelling approaches calibrated to comprehensive observational data sets are still lacking, in particular for real-world high-energy STEs. In the present study, for the first time a density-dependent groundwater flow and transport model was developed and calibrated for a high-energy beach. The north beach of the barrier island Spiekeroog, northern Germany, thereby served as an example field site exposed to high-energy characteristic boundary conditions. The model was calibrated to a 1.5-year extensive dataset of groundwater heads, salinities, temperatures and 3H/He groundwater ages at various cross-shore locations along the beach at depths down to 24 m below ground surface. The calibrated model is able to replicate the principal behaviour of the highly transient system and enabled the identification of temporal variability hotspots. The dynamics in salinity are most intense at the in- and exfiltration locations of the tide-induced recirculating seawater. The groundwater age variability was largest seawards of the low tide mark as well as below the deep recirculating seawater cell at around 20–30 m depth near the dunes, where very old freshwater from the islands’ freshwater lens mixes with young brackish water from the upper beach. Temperature variations were seasonal and confined to the upper 5–10 m below the beach. Overall, the model provided important insights into the dynamics of the flow and transport processes.
- 12 September 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-30
Open AccessComment on egusphere-2025-3132
Subterranean estuaries (STEs) are biogeochemical reactors modifying the chemistry of salt- and freshwater as they flow through the subsurface sediments. Boundary conditions such as tides, waves, beach morphology, seasonal meteoric groundwater recharge and storm events control end member mixing and residence time distributions within STEs. These in turn affect biogeochemical reactions and thus elemental fluxes discharging to the ocean via submarine groundwater discharge. Especially at high-energy beaches exposed to high tidal ranges and high wave energy, boundary conditions are very dynamic and likely imprint on groundwater flow and reactive transport within the STEs. A quantitative understanding of mixing processes and residence time distributions is necessary in order to adequately describe biogeochemical processes and can be achieved with the help of numerical modelling. Yet, transient field-scale modelling approaches calibrated to comprehensive observational data sets are still lacking, in particular for real-world high-energy STEs. In the present study, for the first time a density-dependent groundwater flow and transport model was developed and calibrated for a high-energy beach. The north beach of the barrier island Spiekeroog, northern Germany, thereby served as an example field site exposed to high-energy characteristic boundary conditions. The model was calibrated to a 1.5-year extensive dataset of groundwater heads, salinities, temperatures and 3H/He groundwater ages at various cross-shore locations along the beach at depths down to 24 m below ground surface. The calibrated model is able to replicate the principal behaviour of the highly transient system and enabled the identification of temporal variability hotspots. The dynamics in salinity are most intense at the in- and exfiltration locations of the tide-induced recirculating seawater. The groundwater age variability was largest seawards of the low tide mark as well as below the deep recirculating seawater cell at around 20–30 m depth near the dunes, where very old freshwater from the islands’ freshwater lens mixes with young brackish water from the upper beach. Temperature variations were seasonal and confined to the upper 5–10 m below the beach. Overall, the model provided important insights into the dynamics of the flow and transport processes.
- Open Access
- 4 August 2025
- Published by Copernicus GmbH in EGUsphere
- Vol. 2025, 1-30
Field-scale modelling reveals dynamic groundwater flow and transport patterns in a high-energy subterranean estuary
Subterranean estuaries (STEs) are biogeochemical reactors modifying the chemistry of salt- and freshwater as they flow through the subsurface sediments. Boundary conditions such as tides, waves, beach morphology, seasonal meteoric groundwater recharge and storm events control end member mixing and residence time distributions within STEs. These in turn affect biogeochemical reactions and thus elemental fluxes discharging to the ocean via submarine groundwater discharge. Especially at high-energy beaches exposed to high tidal ranges and high wave energy, boundary conditions are very dynamic and likely imprint on groundwater flow and reactive transport within the STEs. A quantitative understanding of mixing processes and residence time distributions is necessary in order to adequately describe biogeochemical processes and can be achieved with the help of numerical modelling. Yet, transient field-scale modelling approaches calibrated to comprehensive observational data sets are still lacking, in particular for real-world high-energy STEs. In the present study, for the first time a density-dependent groundwater flow and transport model was developed and calibrated for a high-energy beach. The north beach of the barrier island Spiekeroog, northern Germany, thereby served as an example field site exposed to high-energy characteristic boundary conditions. The model was calibrated to a 1.5-year extensive dataset of groundwater heads, salinities, temperatures and 3H/He groundwater ages at various cross-shore locations along the beach at depths down to 24 m below ground surface. The calibrated model is able to replicate the principal behaviour of the highly transient system and enabled the identification of temporal variability hotspots. The dynamics in salinity are most intense at the in- and exfiltration locations of the tide-induced recirculating seawater. The groundwater age variability was largest seawards of the low tide mark as well as below the deep recirculating seawater cell at around 20–30 m depth near the dunes, where very old freshwater from the islands’ freshwater lens mixes with young brackish water from the upper beach. Temperature variations were seasonal and confined to the upper 5–10 m below the beach. Overall, the model provided important insights into the dynamics of the flow and transport processes.
- 4 August 2025
- Published by Copernicus GmbH in EGUsphere
- Vol. 2025, 1-30
Open AccessField-scale modelling reveals dynamic groundwater flow and transport patterns in a high-energy subterranean estuary
Subterranean estuaries (STEs) are biogeochemical reactors modifying the chemistry of salt- and freshwater as they flow through the subsurface sediments. Boundary conditions such as tides, waves, beach morphology, seasonal meteoric groundwater recharge and storm events control end member mixing and residence time distributions within STEs. These in turn affect biogeochemical reactions and thus elemental fluxes discharging to the ocean via submarine groundwater discharge. Especially at high-energy beaches exposed to high tidal ranges and high wave energy, boundary conditions are very dynamic and likely imprint on groundwater flow and reactive transport within the STEs. A quantitative understanding of mixing processes and residence time distributions is necessary in order to adequately describe biogeochemical processes and can be achieved with the help of numerical modelling. Yet, transient field-scale modelling approaches calibrated to comprehensive observational data sets are still lacking, in particular for real-world high-energy STEs. In the present study, for the first time a density-dependent groundwater flow and transport model was developed and calibrated for a high-energy beach. The north beach of the barrier island Spiekeroog, northern Germany, thereby served as an example field site exposed to high-energy characteristic boundary conditions. The model was calibrated to a 1.5-year extensive dataset of groundwater heads, salinities, temperatures and 3H/He groundwater ages at various cross-shore locations along the beach at depths down to 24 m below ground surface. The calibrated model is able to replicate the principal behaviour of the highly transient system and enabled the identification of temporal variability hotspots. The dynamics in salinity are most intense at the in- and exfiltration locations of the tide-induced recirculating seawater. The groundwater age variability was largest seawards of the low tide mark as well as below the deep recirculating seawater cell at around 20–30 m depth near the dunes, where very old freshwater from the islands’ freshwater lens mixes with young brackish water from the upper beach. Temperature variations were seasonal and confined to the upper 5–10 m below the beach. Overall, the model provided important insights into the dynamics of the flow and transport processes.
- Open Access
- 15 March 2025
- Published by Copernicus GmbH
CustEMx - Sustainable software for computational electromagnetics
Geophysical electromagnetic survey techniques are indispensable for the exploration of mineral, groundwater, geothermal, or hydrocarbon resources. CustEM is currently one of few open-source modeling tools for related 3D electromagnetic simulations worldwide. It provides the community with a general tool for modeling of CSEM, semi-airborne EM, TEM, and MT data. CustEM support general anisotropic petrophysical parameters, including the conductivity, the magnetic permeability, electric permittivity, and Cole-Cole parameters to simulate induced-polarization effects. The code also supports inversion of CSEM field data in combination with the inversion library pyGIMLi.The options to develop and provide sustainable codes for numerical solutions are very limited in the framework of geophysical project proposals. In the context of a new research projected dealing with a quality-assured and re-usable software development, we aim to upgrade the code base to ensure the long-term sustainability by consistently addressing the FAIR4RS standards while also changing some fundamental underlying libraries as they are no longer actively supported. The final goal is to supply the community with the new library custEMx, including tools for meshing, visualization, data I/O, partly suppling graphical user interfaces as well as an extended library of tutorials, examples and community benchmarks.We share the state of progress of the transition from custEM to custEMx and show validation results as well as first improvements of the new underlying software to outline new possibilities. We want to closely interact with the user community to ease and support the transition to custEMx, using conferences and workshops not only to inform the community of the progress but also to gather feedback, which will influence the ongoing software development.
- 15 March 2025
- Published by Copernicus GmbH
Open AccessCustEMx - Sustainable software for computational electromagnetics
Geophysical electromagnetic survey techniques are indispensable for the exploration of mineral, groundwater, geothermal, or hydrocarbon resources. CustEM is currently one of few open-source modeling tools for related 3D electromagnetic simulations worldwide. It provides the community with a general tool for modeling of CSEM, semi-airborne EM, TEM, and MT data. CustEM support general anisotropic petrophysical parameters, including the conductivity, the magnetic permeability, electric permittivity, and Cole-Cole parameters to simulate induced-polarization effects. The code also supports inversion of CSEM field data in combination with the inversion library pyGIMLi.The options to develop and provide sustainable codes for numerical solutions are very limited in the framework of geophysical project proposals. In the context of a new research projected dealing with a quality-assured and re-usable software development, we aim to upgrade the code base to ensure the long-term sustainability by consistently addressing the FAIR4RS standards while also changing some fundamental underlying libraries as they are no longer actively supported. The final goal is to supply the community with the new library custEMx, including tools for meshing, visualization, data I/O, partly suppling graphical user interfaces as well as an extended library of tutorials, examples and community benchmarks.We share the state of progress of the transition from custEM to custEMx and show validation results as well as first improvements of the new underlying software to outline new possibilities. We want to closely interact with the user community to ease and support the transition to custEMx, using conferences and workshops not only to inform the community of the progress but also to gather feedback, which will influence the ongoing software development.