Salvatore Castorina has a total of 63 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Vision-Based Solution for Water Level Monitoring in Flash Floods Scenario

    by Bruno Andò, Salvatore Castorina, Salvatore Graziani

    Flash floods represent a serious problem, especially in urban areas, due to the consequences of sediment transport and other phenomena affecting security and life quality of citizens. The availability of low-cost solutions for the real-time monitoring of such phenomena, with particular regards to the water level in urban areas, is of main interest for the realization of early warning systems aimed to predict and handle hazardous events. In this paper a water level monitoring system, based on a low-cost vision system and a dedicated signal processing implemented on an embedded hardware platform, is presented. Main advantage of the proposed approach resides in the adopted sensing methodology, which besides being low-cost, allows for a robust estimation of the water level, without the need for active (powered) ground devices. A proof-of-concept aimed prototype has been realized and its performances have been assessed by means of a dedicated experimental survey. Obtained results highlight high sensitivity and specificity in the water level recognition, with an accuracy close to 100% over the whole explored detection range.


  • Open Access

    A Phenylalanine Ammonia Lyase Capacitive Sensor for Phenylalanine Detection

    by Bruno Andò, Salvatore Castorina, Ludovica Maugeri, Salvatore Petralia, Maria Anna Messina, Martino Ruggieri, Giovanni Neri, Angelo Ferlazzo, Emilio Sardini, Mauro Serpelloni

    In this paper, an easy-to-use and fast biosensor for phenylalanine quantification in patients affected by phenylketonuria is investigated. The phenylalanine concentration was indirectly estimated through the ammonia released as a by-product of an enzymatic reaction, which was then detected by exploiting an yttria-stabilized zirconia layer deposited over an interdigitated capacitive sensor. The latter was manufactured by rapid-prototyping technologies. A sensor limit of detection higher than 1.25 µM was estimated, along with an accuracy better than 18.31 µM.


  • Robustness Investigation of a Particle Analyzer for the Analysis of Volcanic Ash

    by Bruno Andò, Salvatore Baglio, Salvatore Castorina, Salvatore Graziani, Vincenzo Marletta, Alberto Campisi

    The real-time monitoring of volcanic ash is a challenging task, which has been seriously considered in recent years by many institutions handling real needs of urban and air traffic authorities. In this paper a vision-based methodology is presented, which aims to provide a real-time analysis and estimation of specific features characterizing volcanic ash. The measurement methodology is discussed, together with the development of a sensing node prototype. An experimental survey has been performed in order to characterize the system performances and to asses its robustness. A resolution of $23.6\ \mu\mathrm{m}$ has been estimated which matches specifications driven by the addressed application.

  • Open Access

    Characterization of a Vision-Based Tool for the Investigation of Geometric Characteristics of Ground-Deposited Volcanic Ash

    by Bruno Andò, Salvatore Baglio, Salvatore Castorina, Alberto Campisi

    With the support of public authorities and research institutions, volcanic ash fallout and its impact on the safety of people, infrastructure and services are addressed with the aim of defining protocols and instruments for the reliable and effective handling of related emergencies. Most of the solutions proposed in the literature on ash fallout monitoring suffer from high cost and are demanding in terms of installation and maintenance. The approach suggested in this work is based on the use of a low-cost vision embedded system and a dedicated algorithm which automatically processes acquired frames of ground-deposited volcanic ash in order to estimate the main geometric properties of each particle identified in the work area. A complete characterization of the system is presented, along with a robustness analysis of particle shapes, their orientation and their position in the inspected frame. An accuracy of ±40.2 µm (with a 3σ limit) and a resolution of 32.9 µm (in the worst case), over a framed area of 130 mm by 100 mm, were estimated; these values would fulfill the objectives of the application.


  • Assistive Technology for Active Ageing: The NATIFLife Project

    by Bruno Andò, Salvatore Baglio, Salvatore Castorina, Ruben Crispino, Vincenzo Marletta, Giovanni Muscato, Luca Porcaro, Sebastiano Salupo, Carl J. Debono, Nadia Theuma

  • A Network of Monitoring Nodes to Analyze Dimensions of Volcanic Ash Samples

    by Bruno Ando, Salvatore Baglio, Salvatore Castorina, Salvatore Graziani, Alberto Campisi, Vincenzo Marletta

    The investigation of volcanic ash particles granulometry is mandatory in order to cope with real needs of both urban and air traffic, as well as to manage its effect to human health. The approach presented in this paper relies on a computer vision-based methodology for the automatic detection of volcanic ash granulometry through a network of sensing nodes, providing high spatial resolution information, is proposed. The system architecture is presented, along with the proposed image processing methodology aimed to extract statistics on the collected sample of volcanic ash. The system characterization is also addressed. Results obtained in terms of repeatability, experimental variability and the system accuracy are given.


  • Investigation on a Inkjet printed sensor for ammonia detection in liquid media

    by Bruno Ando, Salvatore Baglio, Salvatore Castorina, Salvatore Graziani, Marthala Guru Bhaskar Reddy, Salvatore Petralia, Maria Anna Messina, Ludovica Maugeri, Giovanni Neri, Angelo Ferlazzo

    This paper deals with the development of a low-cost biosensor for the timely detection of phenylalanine levels in patients affected by Phenylketonuria. The proposed approach exploits an indirect measurement of phenylalanine by detecting the concentration of Ammonia resulting from an enzymatic reaction of the analyte. A capacitive sensing approach for the detection of Ammonia is adopted, which is based on the influence of Ammonia on the dielectric permittivity of an Yttria-stabilized Zirconium Oxide layer, deposited over an inkjet printed capacitor with an interdigitated electrodes geometry. An UV/ozone treatment of the sensitive oxide layer is performed with the aim of improving the sensor efficiency. The experimental results of measurement surveys performed on both non-treated and UV/ozone treated device samples are reported here.


  • Open Access

    A Capacitive Sensor, Exploiting a YSZ Functional Layer, for Ammonia Detection

    by Bruno Ando, Salvatore Baglio, Salvatore Castorina, S. Graziani, Sri Viswanadh Gupta Tondepu, Salvatore Petralia, Maria Anna Messina, Ludovica Maugeri, Giovanni Neri, Angelo Ferlazzo

    In different fields, the need for low-cost sensors allowing an early detection of (bio)quantities is emerging. This article deals with the design, realization, and characterization of a low-cost sensor for ammonia detection realized by fast prototyping techniques. The sensor is part of a more complex system aimed to assess the level of phenylalanine levels in biological fluids (blood, saliva, or urine), which would allow the development of a new approach for the self-monitoring of patients with the phenylketonuria (PKU) metabolic disorder. The obtained experimental results encourage the further development of the proposed approach. In particular, the sensor behavior has been investigated for an ammonia concentration in the range [0–2000] $\mu \text{M}$ . The developed sensor prototype shows a responsivity of $3.53\times 10^{-14}$ F/ $\mu \text{M}$ , a resolution of 0.15 $\mu \text{M}$ , and a span-to-resolution of $1.3\times 10^{4}$ .


  • Open Access

    A Vision-Based Approach for the Analysis of Core Characteristics of Volcanic Ash

    by Bruno Andò, Salvatore Baglio, Salvatore Castorina, Vincenzo Marletta

    Volcanic ash fall-out represents a serious hazard for air and road traffic. The forecasting models used to predict its time–space evolution require information about the core characteristics of volcanic particles, such as their granulometry. Typically, such information is gained by the spot direct observation of the ash collected at the ground or by using expensive instrumentation. In this paper, a vision-based methodology aimed at the estimation of ash granulometry is presented. A dedicated image processing paradigm was developed and implemented in LabVIEW™. The methodology was validated experimentally using digital reference images resembling different operating conditions. The outcome of the assessment procedure was very encouraging, showing an accuracy of the image processing algorithm of 1.76%.


  • A Capacitive Readout Strategy for Ammonia Detection: Design Flow, Modeling and Simulation

    by Bruno Ando, Salvatore Baglio, Salvatore Castorina, Salvatore Graziani, Marianna Messina, Salvatore Petralia, Sri Viswanadh Gupta Tondepu

    In this article, the information reported is of a genetical metabolic disorder named Phenylketonuria PKU and the necessity for the development of a biosensor with a complete Point-of-Care system. The choice of the biosensor is a low-cost rapid prototyping sensor fabricated by Inkjet Printed (IJP) Interdigitated Capacitive Transducer (IDT) on a PET substrate. The work curtailed a detailed explanation on the chosen methodology indirect phenylalanine quantification by making use the dielectric permittivity variation caused by the chemical reaction between the functional layer with the residual Ammonia (NH3) generated by an enzymatic reaction involving phenylalanine. This work includes a clear elaboration of the sensor design flow and the modelling of the capacitive sensor with multiple layers on top of the electrodes (Functional layer and Material Under Test). Simulation results are shown which allow for the choice of optimal design parameters for the Capacitive sensor.