Jingran Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jingran Zhang has a total of 87 co-authors. Here are the top co-authors by number of shared publications:
- Zuobin Wang
International Research Centre for Nano Handling and Manufacturing of China, Changchun University of Science and Technology, Changchun 130022, China
6 shared publications - Petr P. Snetkov
ITMO University
5 shared publications - Yanquan Geng
Harbin Institute of Technology
5 shared publications - Liguo Tian
Ministry of Education Key Laboratory for Cross-Scale Micro and Nano Manufacturing
4 shared publications - Changji Mu
Ministry of Education Key Laboratory for Cross-Scale Micro and Nano Manufacturing
3 shared publications Guangfeng Shi
College of Mechanical and Electric Engineering Changchun University of Science and Technology 130000 Changchun Jilin P.R. China
3 shared publications
Latest Publications
- 9 November 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
Regulation of Fibroblast Spreading on Fused Silica Square Nanocone Arrays: Implications for Biomedical Applications
Developing and exploring fabrication techniques for nanostructured biomaterials that enable precise geometric control of the features for mediating cell−nanopattern interactions are essential for cutting-edge biomedical applications. Herein, we utilized a UV laser interference lithography (LIL) combined with an inductively coupled plasma (ICP) etching technique to fabricate 3D nanocones (NCs) with precisely controlled varying top geometries in square arrays on large-area fused silica substrates. The arrangement of NCs was designed via LIL, and the single parameter of the nanocone top diameter can be systematically modulated from 200 nm to 700 nm by ICP etching processing; thereby, the surface energy and wettability of the patterned surfaces were controlled accordingly. We then investigated the interactions of fibroblasts (L929) with these geometrical cues of NCs with changing adhesive area ratio (AAR) and flat substrates. Varying the AAR from 0.02 to 0.22 exerted pronounced impacts on the fibroblast morphology and directional alignment behavior of the fibroblasts. The cell circularity decreased from 0.76 to 0.35, and the aspect ratio increased from 1.66 to 4.11, the cell spreading area improved from 18.77% to 25.97%, and cell alignment shifts from a single axial orientation (0°) gradually toward a diagonal orientation (45°), finally forming dual orientations. We found that the topological nanocone-induced changes in cell morphology, spreading, and aspect ratio are predominantly governed by cytoskeletal remodeling, accompanied by adaptive nuclear morphological remodeling. The high-throughput and precise fabrication method proposed in this study, by enabling geometrically controlled tuning of the AAR, supports various morphogenetic trends in fibroblast cells, thus providing a viable platform for the design of future scaffolds.
- 9 November 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
Regulation of Fibroblast Spreading on Fused Silica Square Nanocone Arrays: Implications for Biomedical Applications
Developing and exploring fabrication techniques for nanostructured biomaterials that enable precise geometric control of the features for mediating cell−nanopattern interactions are essential for cutting-edge biomedical applications. Herein, we utilized a UV laser interference lithography (LIL) combined with an inductively coupled plasma (ICP) etching technique to fabricate 3D nanocones (NCs) with precisely controlled varying top geometries in square arrays on large-area fused silica substrates. The arrangement of NCs was designed via LIL, and the single parameter of the nanocone top diameter can be systematically modulated from 200 nm to 700 nm by ICP etching processing; thereby, the surface energy and wettability of the patterned surfaces were controlled accordingly. We then investigated the interactions of fibroblasts (L929) with these geometrical cues of NCs with changing adhesive area ratio (AAR) and flat substrates. Varying the AAR from 0.02 to 0.22 exerted pronounced impacts on the fibroblast morphology and directional alignment behavior of the fibroblasts. The cell circularity decreased from 0.76 to 0.35, and the aspect ratio increased from 1.66 to 4.11, the cell spreading area improved from 18.77% to 25.97%, and cell alignment shifts from a single axial orientation (0°) gradually toward a diagonal orientation (45°), finally forming dual orientations. We found that the topological nanocone-induced changes in cell morphology, spreading, and aspect ratio are predominantly governed by cytoskeletal remodeling, accompanied by adaptive nuclear morphological remodeling. The high-throughput and precise fabrication method proposed in this study, by enabling geometrically controlled tuning of the AAR, supports various morphogenetic trends in fibroblast cells, thus providing a viable platform for the design of future scaffolds.
- 1 September 2026
- Published by IOP Publishing in Nanotechnology
- Vol. 37 (35) , 352003
Hyaluronic acid-based nanocarriers for cancer therapy: molecular design, biointerface mechanisms, and translational challenges
Hyaluronic acid (HA) has emerged as a versatile structural material and targeting ligand within cancer drug delivery systems and nanomedicine applications, owing to its biodegradability, tunable chemistry, and strong affinity for CD44 and related receptors. This review examines studies published from 2019 to 2026, with emphasis on high-quality research in leading journals, and connects the structural parameters of HA with quantitative drug delivery efficiency and therapeutic performance. The major HA-based carrier systems, including micelles, liposomes, polymeric nanoparticles, metal–organic frameworks, and electrospun fiber systems, are critically analyzed in relation to HA molecular weight, degree of substitution, and ligand density, as well as their effects on hydrodynamic size, zeta potential, colloidal stability, and cellular uptake. Across these studies, the most effective designs generally feature nanoscale dimensions that balance circulation and tumor penetration while maintaining near-neutral or slightly negative surface potentials to minimize nonspecific interactions, highlighting the importance of rational physicochemical design for improving therapeutic performance. Quantitative models of drug release, together with in vitro potency indices such as half-maximal inhibitory concentration (IC50) and combination index, as well as in vivo pharmacokinetic and efficacy indicators including half-life, area under the curve (AUC), and tumor-to-organ ratio, demonstrate how the configuration of HA influences therapeutic selectivity and systemic safety. To improve the rigor and reproducibility of future studies, this review further proposes a concise reporting framework integrating materials characterization, biological evaluation, and animal experiments, while highlighting the current limitations in standardization and cross-study comparability. In conclusion, this review summarizes the current design principles of HA-based nanocarriers while critically discussing the remaining challenges, including CD44 heterogeneity, microenvironmental competition, and the lack of standardized evaluation strategies. Together, these perspectives provide practical guidance for the rational design, comparative evaluation, and clinical translation of next-generation HA-based nanocarriers.
- 1 September 2026
- Published by IOP Publishing in Nanotechnology
- Vol. 37 (35) , 352003
Hyaluronic acid-based nanocarriers for cancer therapy: molecular design, biointerface mechanisms, and translational challenges
Hyaluronic acid (HA) has emerged as a versatile structural material and targeting ligand within cancer drug delivery systems and nanomedicine applications, owing to its biodegradability, tunable chemistry, and strong affinity for CD44 and related receptors. This review examines studies published from 2019 to 2026, with emphasis on high-quality research in leading journals, and connects the structural parameters of HA with quantitative drug delivery efficiency and therapeutic performance. The major HA-based carrier systems, including micelles, liposomes, polymeric nanoparticles, metal–organic frameworks, and electrospun fiber systems, are critically analyzed in relation to HA molecular weight, degree of substitution, and ligand density, as well as their effects on hydrodynamic size, zeta potential, colloidal stability, and cellular uptake. Across these studies, the most effective designs generally feature nanoscale dimensions that balance circulation and tumor penetration while maintaining near-neutral or slightly negative surface potentials to minimize nonspecific interactions, highlighting the importance of rational physicochemical design for improving therapeutic performance. Quantitative models of drug release, together with in vitro potency indices such as half-maximal inhibitory concentration (IC50) and combination index, as well as in vivo pharmacokinetic and efficacy indicators including half-life, area under the curve (AUC), and tumor-to-organ ratio, demonstrate how the configuration of HA influences therapeutic selectivity and systemic safety. To improve the rigor and reproducibility of future studies, this review further proposes a concise reporting framework integrating materials characterization, biological evaluation, and animal experiments, while highlighting the current limitations in standardization and cross-study comparability. In conclusion, this review summarizes the current design principles of HA-based nanocarriers while critically discussing the remaining challenges, including CD44 heterogeneity, microenvironmental competition, and the lack of standardized evaluation strategies. Together, these perspectives provide practical guidance for the rational design, comparative evaluation, and clinical translation of next-generation HA-based nanocarriers.
- Open Access
- 1 July 2026
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3281 (1) , 012021
Interfacial engineering and performance investigation of anodes for aqueous zinc-ion batteries
Aqueous zinc-ion batteries (AZIBs) have been increasingly attracting attention as emerging alternatives for energy storage applications on a large scale, benefiting from their inherent safety, low environmental impact, and cost advantages. However, challenges such as dendrite formation and surface deterioration significantly hinder the commercial application of Zn metal anodes, resulting in deteriorated cycling stability and a shortened battery lifespan. To address these issues, an uncomplicated and effective coating strategy was developed to construct a PANI/rGO composite functional layer, which provides abundant zinc-philic sites and a conductive carbon network to regulate Zn 2+ deposition and suppress undesired reactions. The PANI/rGO layer not only facilitates uniform ion flux but also enhances interfacial electron transfer, resulting in a substantial reduction in charge-transfer resistance and corrosion current. Electrochemical evaluation demonstrates that the symmetrical cell assembled with PANI/rGO@Zn electrodes exhibits significantly improved performance, delivering stable cycling for approximately 500 hours, whereas bare Zn electrodes fail within less than 100 hours. Furthermore, the advantages of the PANI/rGO-modified Zn anode are further validated in Zn//MnO 2 full cells, where the modified system delivers a superior initial discharge capacity (281 mAh g −1 ) and significantly improved capacity retention (253 mAh g −1 after 200 cycles) compared with the rapid capacity decay observed in the bare Zn-based cell. This work demonstrates an efficient and straightforward strategy to stabilize Zn anodes, in which the composite coating effectively enhances the overall lifespan of the battery, providing design guidance for protective layer engineering and contributing to the practical use of AZIBs in large-scale energy storage technologies.
- 1 July 2026
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3281 (1) , 012021
Open AccessInterfacial engineering and performance investigation of anodes for aqueous zinc-ion batteries
Aqueous zinc-ion batteries (AZIBs) have been increasingly attracting attention as emerging alternatives for energy storage applications on a large scale, benefiting from their inherent safety, low environmental impact, and cost advantages. However, challenges such as dendrite formation and surface deterioration significantly hinder the commercial application of Zn metal anodes, resulting in deteriorated cycling stability and a shortened battery lifespan. To address these issues, an uncomplicated and effective coating strategy was developed to construct a PANI/rGO composite functional layer, which provides abundant zinc-philic sites and a conductive carbon network to regulate Zn 2+ deposition and suppress undesired reactions. The PANI/rGO layer not only facilitates uniform ion flux but also enhances interfacial electron transfer, resulting in a substantial reduction in charge-transfer resistance and corrosion current. Electrochemical evaluation demonstrates that the symmetrical cell assembled with PANI/rGO@Zn electrodes exhibits significantly improved performance, delivering stable cycling for approximately 500 hours, whereas bare Zn electrodes fail within less than 100 hours. Furthermore, the advantages of the PANI/rGO-modified Zn anode are further validated in Zn//MnO 2 full cells, where the modified system delivers a superior initial discharge capacity (281 mAh g −1 ) and significantly improved capacity retention (253 mAh g −1 after 200 cycles) compared with the rapid capacity decay observed in the bare Zn-based cell. This work demonstrates an efficient and straightforward strategy to stabilize Zn anodes, in which the composite coating effectively enhances the overall lifespan of the battery, providing design guidance for protective layer engineering and contributing to the practical use of AZIBs in large-scale energy storage technologies.
- 30 May 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (23) , 16238-16249
Recyclable 3D Au NPs@ZnO Nanorods@Inverted Triangular Pyramid Cu as SERS Substrates for Pollutant Detection
The rapid development of surface-enhanced Raman scattering (SERS) technology provides a fast and nondestructive method for food safety detection. However, most noble metal/ZnO as SERS substrates were fabricated on flat surfaces. Research on growing ZnO on micro/nanostructured surfaces as SERS substrates with self-cleaning and high-sensitivity performance is scarce. In our work, Au nanoparticles@ZnO nanorods (nanosheets)@inverted triangular pyramid indentations (Au NPs@ZnO NRs (NSs)@ITP Cu), as a self-cleaning composite SERS substrate, were fabricated by combining nanoindentation, hydrothermal, and magnetron sputtering. First, significant influences on the morphology of the arrayed inverted triangular pyramid indentation structures were observed with variations in the machining parameters. Subsequently, the effects of different hydrothermal parameters on the ZnO nanorods were compared. It was found that a well-defined, single-pyramidal indentation enabled the growth of vertically aligned ZnO nanorod structures. In contrast, a nanosheet-like ZnO morphology was predominantly formed on the overlapped inverted triangular pyramid indentations. Second, compared to the electric field intensities of single Au NPs on the flat Cu surface, the electric field intensities of Au NPs@ZnO NRs@ITP Cu and Au NPs@ZnO NSs@ITP Cu were 50.8 and 33.5 times, respectively. Finally, the Au NPs@ZnO NRs@ITP Cu Tri 2 substrate demonstrated superior SERS performance, enabling the detection of 10–9 mol/L R6G and 10–7 mol/L MG. Then, R6G and MG molecules on the SERS substrate were completely degraded after 120 and 30 min of UV–visible irradiation, respectively. This demonstrated the significant potential of recyclable, ultrasensitive SERS substrates for detecting pollutants.
- 30 May 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (23) , 16238-16249
Recyclable 3D Au NPs@ZnO Nanorods@Inverted Triangular Pyramid Cu as SERS Substrates for Pollutant Detection
The rapid development of surface-enhanced Raman scattering (SERS) technology provides a fast and nondestructive method for food safety detection. However, most noble metal/ZnO as SERS substrates were fabricated on flat surfaces. Research on growing ZnO on micro/nanostructured surfaces as SERS substrates with self-cleaning and high-sensitivity performance is scarce. In our work, Au nanoparticles@ZnO nanorods (nanosheets)@inverted triangular pyramid indentations (Au NPs@ZnO NRs (NSs)@ITP Cu), as a self-cleaning composite SERS substrate, were fabricated by combining nanoindentation, hydrothermal, and magnetron sputtering. First, significant influences on the morphology of the arrayed inverted triangular pyramid indentation structures were observed with variations in the machining parameters. Subsequently, the effects of different hydrothermal parameters on the ZnO nanorods were compared. It was found that a well-defined, single-pyramidal indentation enabled the growth of vertically aligned ZnO nanorod structures. In contrast, a nanosheet-like ZnO morphology was predominantly formed on the overlapped inverted triangular pyramid indentations. Second, compared to the electric field intensities of single Au NPs on the flat Cu surface, the electric field intensities of Au NPs@ZnO NRs@ITP Cu and Au NPs@ZnO NSs@ITP Cu were 50.8 and 33.5 times, respectively. Finally, the Au NPs@ZnO NRs@ITP Cu Tri 2 substrate demonstrated superior SERS performance, enabling the detection of 10–9 mol/L R6G and 10–7 mol/L MG. Then, R6G and MG molecules on the SERS substrate were completely degraded after 120 and 30 min of UV–visible irradiation, respectively. This demonstrated the significant potential of recyclable, ultrasensitive SERS substrates for detecting pollutants.
- 13 April 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (16) , 11068-11087
Molecular Dynamics Study on the Adsorption of Antimicrobial Peptides on the Surface of Al 2 O 3 Nanostructures in a Water Environment
Owing to their broad-spectrum antimicrobial activity and low tendency to induce resistance, antimicrobial peptides (AMPs) are highly regarded as candidates to construct antifouling coatings for marine equipment surfaces. Studies on AMPs have primarily focused on their adsorption characteristics on material surfaces. However, the adsorption behavior of AMPs on various nanostructured surfaces in an aqueous environment has not yet been revealed. Therefore, the adsorption process of AMP molecules was employed to investigate nanostructured Al2O3 surfaces, including rectangular grooves, triangular grooves, and semicircular grooves, in an aqueous environment by molecular dynamics simulations. First, the effects of different nanostructures on the adsorption of water molecules were investigated. In the rectangular grooves, the A03 system was observed to be more favorable for the attachment of water molecules on the substrate surface. In contrast, the width and depth of the grooves were found to have a comparatively minor influence on the adhesion of water molecules for the triangular grooves. Second, the influence of different nanostructures on the adsorption effectiveness of AMP molecules in aqueous solution was analyzed. The results indicated that the stability of AMPs' adsorption was not consistently enhanced by an increase in the width of the rectangular groove; however, it was weakened by an increase in the groove depth. In contrast, for the triangular grooves, the adsorption stability of AMPs was promoted with increasing groove width, whereas it was weakened by greater groove depth. Finally, the stability of AMPs' adsorption with the four structures was determined to follow the order ideal plane < semicircular groove < rectangular groove < triangular groove.
- 13 April 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (16) , 11068-11087
Molecular Dynamics Study on the Adsorption of Antimicrobial Peptides on the Surface of Al 2 O 3 Nanostructures in a Water Environment
Owing to their broad-spectrum antimicrobial activity and low tendency to induce resistance, antimicrobial peptides (AMPs) are highly regarded as candidates to construct antifouling coatings for marine equipment surfaces. Studies on AMPs have primarily focused on their adsorption characteristics on material surfaces. However, the adsorption behavior of AMPs on various nanostructured surfaces in an aqueous environment has not yet been revealed. Therefore, the adsorption process of AMP molecules was employed to investigate nanostructured Al2O3 surfaces, including rectangular grooves, triangular grooves, and semicircular grooves, in an aqueous environment by molecular dynamics simulations. First, the effects of different nanostructures on the adsorption of water molecules were investigated. In the rectangular grooves, the A03 system was observed to be more favorable for the attachment of water molecules on the substrate surface. In contrast, the width and depth of the grooves were found to have a comparatively minor influence on the adhesion of water molecules for the triangular grooves. Second, the influence of different nanostructures on the adsorption effectiveness of AMP molecules in aqueous solution was analyzed. The results indicated that the stability of AMPs' adsorption was not consistently enhanced by an increase in the width of the rectangular groove; however, it was weakened by an increase in the groove depth. In contrast, for the triangular grooves, the adsorption stability of AMPs was promoted with increasing groove width, whereas it was weakened by greater groove depth. Finally, the stability of AMPs' adsorption with the four structures was determined to follow the order ideal plane < semicircular groove < rectangular groove < triangular groove.
- 6 April 2026
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
- Vol. 18 (17) , 3545-3556
Multidimensional information detection of liver cancer cell exosomes treated with shikonin
Exosomes were recently recognized as mediators of intercellular communication and as potential biomarkers associated with cancer.
- 6 April 2026
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
- Vol. 18 (17) , 3545-3556
Multidimensional information detection of liver cancer cell exosomes treated with shikonin
Exosomes were recently recognized as mediators of intercellular communication and as potential biomarkers associated with cancer.
- Open Access
- 23 March 2026
- Published by IMR Press in Frontiers in Bioscience-Landmark
- Vol. 31 (3) , 48405
Synergistic Anticancer Activity of Dual-Molecule-Loaded Polymeric Films Based on Hyaluronic Acid Against Melanoma
Background: Melanoma, an aggressive cancer with a poor prognosis, is difficult for early diagnosis, and there are limited drug treatments. Biologically active molecules, especially polyphenols and flavonoids, have a great therapeutic potential; however, their applications are limited by low aqueous solubility and bioavailability. Research Design and Methods: The mixture of usnic acid and curcumin was loaded into the polymer matrices based on hyaluronic acid, with the following polymeric film casting. The anticancer activity of the dual-molecule-loaded polymeric films was evaluated against lightly pigmented human melanoma SK-MEL 28 and unpigmented melanoma CVCL-7036 in comparison with the immortalized human keratinocytes HaCaT. Results: Usnic acid/curcumin-loaded biopolymer matrices demonstrated a high selective antitumor toxicity against melanoma SK-MEL 28 and CVCL-7036 cell lines with high biocompatibility with immortalized human keratinocytes HaCaT. Conclusions: Results highlight the potential of the obtained dual-molecule-loaded thin films based on hyaluronic acid as topical and safe antitumor therapy systems for local administration for the melanoma treatment. Moreover, due to the intrinsic properties of usnic acid and curcumin, and the biological activity of native hyaluronic acid, it is supposed that the obtained matrices possess the anti-inflammatory, antioxidant, antibacterial, and wound-healing activities, which are planned to be confirmed in further investigations.
- 23 March 2026
- Published by IMR Press in Frontiers in Bioscience-Landmark
- Vol. 31 (3) , 48405
Open AccessSynergistic Anticancer Activity of Dual-Molecule-Loaded Polymeric Films Based on Hyaluronic Acid Against Melanoma
Background: Melanoma, an aggressive cancer with a poor prognosis, is difficult for early diagnosis, and there are limited drug treatments. Biologically active molecules, especially polyphenols and flavonoids, have a great therapeutic potential; however, their applications are limited by low aqueous solubility and bioavailability. Research Design and Methods: The mixture of usnic acid and curcumin was loaded into the polymer matrices based on hyaluronic acid, with the following polymeric film casting. The anticancer activity of the dual-molecule-loaded polymeric films was evaluated against lightly pigmented human melanoma SK-MEL 28 and unpigmented melanoma CVCL-7036 in comparison with the immortalized human keratinocytes HaCaT. Results: Usnic acid/curcumin-loaded biopolymer matrices demonstrated a high selective antitumor toxicity against melanoma SK-MEL 28 and CVCL-7036 cell lines with high biocompatibility with immortalized human keratinocytes HaCaT. Conclusions: Results highlight the potential of the obtained dual-molecule-loaded thin films based on hyaluronic acid as topical and safe antitumor therapy systems for local administration for the melanoma treatment. Moreover, due to the intrinsic properties of usnic acid and curcumin, and the biological activity of native hyaluronic acid, it is supposed that the obtained matrices possess the anti-inflammatory, antioxidant, antibacterial, and wound-healing activities, which are planned to be confirmed in further investigations.
- 21 October 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (43) , 29018-29032
Molecular Dynamics Research on Geometric Effect of Rectangular Groove Surface Morphology of Cu and Gr/Cu Substrates on Pesticide Molecule 2,4-D Adsorption
Excessive pesticides can lead to environmental pollution and pose serious risks to human health. However, the adsorption mechanisms of the pesticide molecule 2,4-dichlorophenoxyacetic acid (2,4-D) on nanostructures, graphene surfaces, and systems combining nanostructures and graphene surfaces remain underexplored. Here, the influence of rectangular groove geometries on the adsorption of the pesticide molecule 2,4-D on Cu and graphene-coated Cu (Gr/Cu) substrates was investigated via molecular dynamics (MD) simulations. In particular, the effects of the geometric features (depth and width) on the equilibrium structure of the adsorption layer and the interactions between the substrates and the adsorbed molecules were investigated. First, the effects of varying geometric dimensions of rectangular grooves on the adsorption behavior of 2,4-D molecules were analyzed. At a groove width of 30 Å and depths of 3-12 Å, 2,4-D completely penetrated the groove bottom. Subsequently, the influence of the groove geometry on the graphene adsorption configurations on Cu substrates was evaluated. The graphene adsorption configurations on nanostructured rectangular groove surfaces with different depths and widths were classified into three types: full adhesion, partial adhesion, and suspension. Finally, the influence of rectangular grooves with varying widths and depths on the adsorption behavior of 2,4-D molecules on the Gr/Cu surface was examined. At a groove width of 30 Å and depths of up to 10 Å, increasing the groove depth facilitated the formation of the 2,4-D adsorption layer on the graphene surface. Conversely, at a groove depth of 5 Å and widths of within 20 Å, increasing the groove width promoted faster formation of the adsorption layer. Compared with the bare Cu substrate, the Gr/Cu substrate exhibited a significantly higher adsorption for 2,4-D molecules. These findings demonstrate that integrating graphene with rectangular groove structures on Cu not only promotes molecular diffusion but also improves the adsorption stability of 2,4-D molecules on the substrate surface.
- 21 October 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (43) , 29018-29032
Molecular Dynamics Research on Geometric Effect of Rectangular Groove Surface Morphology of Cu and Gr/Cu Substrates on Pesticide Molecule 2,4-D Adsorption
Excessive pesticides can lead to environmental pollution and pose serious risks to human health. However, the adsorption mechanisms of the pesticide molecule 2,4-dichlorophenoxyacetic acid (2,4-D) on nanostructures, graphene surfaces, and systems combining nanostructures and graphene surfaces remain underexplored. Here, the influence of rectangular groove geometries on the adsorption of the pesticide molecule 2,4-D on Cu and graphene-coated Cu (Gr/Cu) substrates was investigated via molecular dynamics (MD) simulations. In particular, the effects of the geometric features (depth and width) on the equilibrium structure of the adsorption layer and the interactions between the substrates and the adsorbed molecules were investigated. First, the effects of varying geometric dimensions of rectangular grooves on the adsorption behavior of 2,4-D molecules were analyzed. At a groove width of 30 Å and depths of 3-12 Å, 2,4-D completely penetrated the groove bottom. Subsequently, the influence of the groove geometry on the graphene adsorption configurations on Cu substrates was evaluated. The graphene adsorption configurations on nanostructured rectangular groove surfaces with different depths and widths were classified into three types: full adhesion, partial adhesion, and suspension. Finally, the influence of rectangular grooves with varying widths and depths on the adsorption behavior of 2,4-D molecules on the Gr/Cu surface was examined. At a groove width of 30 Å and depths of up to 10 Å, increasing the groove depth facilitated the formation of the 2,4-D adsorption layer on the graphene surface. Conversely, at a groove depth of 5 Å and widths of within 20 Å, increasing the groove width promoted faster formation of the adsorption layer. Compared with the bare Cu substrate, the Gr/Cu substrate exhibited a significantly higher adsorption for 2,4-D molecules. These findings demonstrate that integrating graphene with rectangular groove structures on Cu not only promotes molecular diffusion but also improves the adsorption stability of 2,4-D molecules on the substrate surface.
- Open Access
- 13 October 2025
- Published by MDPI AG in Journal of Functional Biomaterials
- Vol. 16 (10) , 384
Natural Polymers, Their Modifications and Composites with Synthetic Polymers for Tympanic Membrane Regeneration
The perforation of the tympanic membrane is a world-wide clinical problem resulting from trauma or infection and requiring effective regeneration methods. In recent years researchers have focused on natural polymers as promising materials for restoring the structure and function of the tympanic membrane. This review summarizes current advances in the use of natural polymers, such as silk fibroin, chitosan, hyaluronic acid, collagen, bacterial cellulose, alginates and others, for the treatment of tympanic membrane perforations. The key properties of these materials are discussed, including their biocompatibility, biodegradability, mechanical strength, and ability to support cell adhesion and proliferation. The review also covers the potential of natural polymers and their combinations in tympanic membrane regeneration and suggests the directions for future research.
- 13 October 2025
- Published by MDPI AG in Journal of Functional Biomaterials
- Vol. 16 (10) , 384
Open AccessNatural Polymers, Their Modifications and Composites with Synthetic Polymers for Tympanic Membrane Regeneration
The perforation of the tympanic membrane is a world-wide clinical problem resulting from trauma or infection and requiring effective regeneration methods. In recent years researchers have focused on natural polymers as promising materials for restoring the structure and function of the tympanic membrane. This review summarizes current advances in the use of natural polymers, such as silk fibroin, chitosan, hyaluronic acid, collagen, bacterial cellulose, alginates and others, for the treatment of tympanic membrane perforations. The key properties of these materials are discussed, including their biocompatibility, biodegradability, mechanical strength, and ability to support cell adhesion and proliferation. The review also covers the potential of natural polymers and their combinations in tympanic membrane regeneration and suggests the directions for future research.
- Open Access
- 7 November 2024
- Published by MDPI AG in Lubricants
- Vol. 12 (11) , 385
A Computational Fluid Dynamics-Based Study on the Effect of Bionic-Compound Recess Structures in Aerostatic Thrust Bearings
To investigate the effect of recess structures on the static and dynamic performance of aerostatic thrust bearings and to explore superior designs, this study analyzes the load-capacity theoretical model, identifying that the throttling effect and pressure-holding effect of the recess are the key factors determining the bearings’ static performance. Computational fluid dynamics (CFD) was used to evaluate three types of recess structures: a simple-orifice recess (SOR), a rectangular-compound recess (RCR), and a bionic-compound recess (BCR). The results indicate that the BCR structure demonstrates efficient transmission performance by reducing flow resistance and diverting air, while ensuring a reasonable pressure drop as the radial ratio αi changes. Additionally, the smaller air capacity of the BCR structure contributes to enhanced bearing stability, showing clear advantages in both static and dynamic performance. This research illustrates the practical application of bionics in mechanical design and provides new theoretical foundations and design strategies for improving aerostatic bearing performance.
- 7 November 2024
- Published by MDPI AG in Lubricants
- Vol. 12 (11) , 385
Open AccessA Computational Fluid Dynamics-Based Study on the Effect of Bionic-Compound Recess Structures in Aerostatic Thrust Bearings
To investigate the effect of recess structures on the static and dynamic performance of aerostatic thrust bearings and to explore superior designs, this study analyzes the load-capacity theoretical model, identifying that the throttling effect and pressure-holding effect of the recess are the key factors determining the bearings’ static performance. Computational fluid dynamics (CFD) was used to evaluate three types of recess structures: a simple-orifice recess (SOR), a rectangular-compound recess (RCR), and a bionic-compound recess (BCR). The results indicate that the BCR structure demonstrates efficient transmission performance by reducing flow resistance and diverting air, while ensuring a reasonable pressure drop as the radial ratio αi changes. Additionally, the smaller air capacity of the BCR structure contributes to enhanced bearing stability, showing clear advantages in both static and dynamic performance. This research illustrates the practical application of bionics in mechanical design and provides new theoretical foundations and design strategies for improving aerostatic bearing performance.