Marty Lail
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Marty Lail has a total of 58 co-authors. Here are the top co-authors by number of shared publications:
- Mustapha Soukri
RTI International, 3040 East Cornwallis Road, Research Triangle Park, Durham, NC 27709-2194, USA
8 shared publications - Paul D. Mobley
RTI International
8 shared publications - Ignacio Luz
RTI International 3040 East Cornwallis Road, RTP Durham NC 27709 USA
6 shared publications - Jak Tanthana
RTI International, 3040 East Cornwallis Road, Durham, North Carolina 27709, United States
6 shared publications Kelly Amato
RTI International, Research Triangle Park, USA
4 shared publications- Samuel John Thompson
Department of Chemistry, University of Texas at Austin , Austin, Texas 78712, United States
4 shared publications
Latest Publications
- 9 January 2026
- Published by Office of Scientific and Technical Information (OSTI)
Carbon Capture Plant Front-End Engineering Design Study for Cement Manufacturing
Final Scientific/Technical Report – Unlimited Rights
- 9 January 2026
- Published by Office of Scientific and Technical Information (OSTI)
Carbon Capture Plant Front-End Engineering Design Study for Cement Manufacturing
Final Scientific/Technical Report – Unlimited Rights
- 6 March 2025
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 64 (11) , 6077-6086
Engineering-Scale Demonstration of the High CO2 Capture Rate by the Water-Lean Solvent at Technology Centre Mongstad
- 6 March 2025
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 64 (11) , 6077-6086
Engineering-Scale Demonstration of the High CO2 Capture Rate by the Water-Lean Solvent at Technology Centre Mongstad
- Open Access
- 1 January 2025
- Published by Elsevier in SSRN Electronic Journal
Effective Area Evaluation of Rotating Packed Beds in a Flexible CO2 Capture Process
Rotating packed beds (RPBs) are a promising process-intensification technology to improve carbon capture system response to high turndown scenarios in dynamically operated NGCC plants which load-follow renewable energy production. Capital costs may also be greatly reduced due to equipment size reduction by replacing conventional absorber columns with a 10x smaller RPB. RPB performance can be significantly enhanced with improved packing design. Alternative materials to previously studied stainless steel packings are of interest to reduce packing weight and develop sophisticated packing structures. This work characterized the operating limits of a bench-scale RPB and the effective interfacial area of nine alternative, commercially scalable packings under various total gas flow rates, liquid to gas ratios, and RPB speeds. High void fraction, mid-range porosity packings had the highest effective interfacial areas.
- 1 January 2025
- Published by Elsevier in SSRN Electronic Journal
Open AccessEffective Area Evaluation of Rotating Packed Beds in a Flexible CO2 Capture Process
Rotating packed beds (RPBs) are a promising process-intensification technology to improve carbon capture system response to high turndown scenarios in dynamically operated NGCC plants which load-follow renewable energy production. Capital costs may also be greatly reduced due to equipment size reduction by replacing conventional absorber columns with a 10x smaller RPB. RPB performance can be significantly enhanced with improved packing design. Alternative materials to previously studied stainless steel packings are of interest to reduce packing weight and develop sophisticated packing structures. This work characterized the operating limits of a bench-scale RPB and the effective interfacial area of nine alternative, commercially scalable packings under various total gas flow rates, liquid to gas ratios, and RPB speeds. High void fraction, mid-range porosity packings had the highest effective interfacial areas.
- Open Access
- 1 January 2024
- Published by Elsevier in SSRN Electronic Journal
Development of a Rate-Based ENRTL-RK Process Model for a Water-Lean Solvent
Advanced water-lean solvents (WLS) for post-combustion CO2 capture offer several advantages over the aqueous amine solvents. WLS have lower parasitic energy penalty, lower corrosion, lower temperature and high-pressure CO2 regeneration leading to lower cost of CO2 capture. RTI International, with funding from the US Department of Energy, has been developing its novel water-lean solvent, that has shown specific reboiler duty of 2.3 GJ/t-CO2 at the 60-kWe pilot testing unit (Tiller Plant, SINTEF, Norway) and 2.6 GJ/t-CO2 at the engineering scale testing system (12 MWe) at the Technology Centre Mongstad (TCM) in Norway. All heat duties, including the one from TCM testing, were consistent with Aspen Plus modeling of the specific configuration of each test plant. This work focuses on the development of a detailed process model using in-house laboratory measurements and process data at pilot scale. The eNTRL-RK model used in this work is based on an unsymmetric activity coefficient model with the reference states chosen to be pure liquids for solvents and ideal dilute solution at unit solute molality (resulting in activity coefficient of unity at infinite dilution) for electrolytes. It uses the Redlich-Kwong equation of state for vapor phase properties and Henry’s law for solubility of supercritical gases. The model was validated using process data from the pilot-scale campaign at the Tiller plant, and the engineering scale test campaign at TCM. Data on CO2 capture rate, absorber, and regenerator temperature profiles and specific reboiler duties from two different test campaigns at Tiller and TCM, were used to further refine and validate the model and the model compares favorably to experimental data. The validation results against TCM campaign will be presented in this work.
- 1 January 2024
- Published by Elsevier in SSRN Electronic Journal
Open AccessDevelopment of a Rate-Based ENRTL-RK Process Model for a Water-Lean Solvent
Advanced water-lean solvents (WLS) for post-combustion CO2 capture offer several advantages over the aqueous amine solvents. WLS have lower parasitic energy penalty, lower corrosion, lower temperature and high-pressure CO2 regeneration leading to lower cost of CO2 capture. RTI International, with funding from the US Department of Energy, has been developing its novel water-lean solvent, that has shown specific reboiler duty of 2.3 GJ/t-CO2 at the 60-kWe pilot testing unit (Tiller Plant, SINTEF, Norway) and 2.6 GJ/t-CO2 at the engineering scale testing system (12 MWe) at the Technology Centre Mongstad (TCM) in Norway. All heat duties, including the one from TCM testing, were consistent with Aspen Plus modeling of the specific configuration of each test plant. This work focuses on the development of a detailed process model using in-house laboratory measurements and process data at pilot scale. The eNTRL-RK model used in this work is based on an unsymmetric activity coefficient model with the reference states chosen to be pure liquids for solvents and ideal dilute solution at unit solute molality (resulting in activity coefficient of unity at infinite dilution) for electrolytes. It uses the Redlich-Kwong equation of state for vapor phase properties and Henry’s law for solubility of supercritical gases. The model was validated using process data from the pilot-scale campaign at the Tiller plant, and the engineering scale test campaign at TCM. Data on CO2 capture rate, absorber, and regenerator temperature profiles and specific reboiler duties from two different test campaigns at Tiller and TCM, were used to further refine and validate the model and the model compares favorably to experimental data. The validation results against TCM campaign will be presented in this work.
- 1 January 2023
- Published by EAGE Publications bv
- Vol. 2023 (1) , 1-5
Nonaqueous Solvent Enhances Commercial Viability of Carbon Capture with Amine
- 1 January 2023
- Published by EAGE Publications bv
- Vol. 2023 (1) , 1-5
Nonaqueous Solvent Enhances Commercial Viability of Carbon Capture with Amine
- 14 November 2019
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 10 (1) , 105-112
MOF-derived nanostructured catalysts for low-temperature ammonia synthesis
Nanostructured catalysts for low-temperature ammonia synthesis have been developed via thermal treatment under nitrogen of Ru-containing MOFs. The resulting catalysts reveal high concentration of small Ru nanocrystals (<4 nm) well-dispersed on a graphitic carbon shell demonstrating stable ammonia formation rates at low temperature. Additional acetylene pre-treatment leads to more dispersed active catalysts containing stable sub-nanometric Ru clusters.
- 14 November 2019
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 10 (1) , 105-112
MOF-derived nanostructured catalysts for low-temperature ammonia synthesis
Nanostructured catalysts for low-temperature ammonia synthesis have been developed via thermal treatment under nitrogen of Ru-containing MOFs. The resulting catalysts reveal high concentration of small Ru nanocrystals (<4 nm) well-dispersed on a graphitic carbon shell demonstrating stable ammonia formation rates at low temperature. Additional acetylene pre-treatment leads to more dispersed active catalysts containing stable sub-nanometric Ru clusters.
- 18 April 2019
- Published by Wiley in ChemSusChem
- Vol. 12 (12) , 2598-2604
CaCoxZr1−xO3−δ Perovskites as Oxygen‐Selective Sorbents for Air Separation
ABO3−δ perovskites are ideal for high‐temperature thermochemical air separation for oxygen production because their oxygen nonstoichiometry δ can be varied in response to changes in temperature and oxygen partial pressure [ ]. Herein, the outstanding oxygen‐sorption performance of CaCoxZr1−xO3−δ perovskites and their potential application as oxygen‐selective sorbents for air separation is reported. In situ thermal X‐ray diffraction was used to study the materials’ structural changes in response to temperature variations in air and inert atmosphere. Temperature‐programmed reduction was employed to elucidate the relationship between perovskite composition and redox property. O2 sorption performance was evaluated by isothermal analyses at various temperature and along with long‐term absorption–desorption cycle tests. The high oxygen‐sorption capacity was mainly attributed to Co at B‐site, whereas partial substitution of Co by Zr enhanced the structural crystallinity and thermal stability of the perovskite. A stable oxygen production of 2.87 wt % was observed at 900 °C during 5 min‐sorption cycles for 100 cycles.
- 18 April 2019
- Published by Wiley in ChemSusChem
- Vol. 12 (12) , 2598-2604
CaCoxZr1−xO3−δ Perovskites as Oxygen‐Selective Sorbents for Air Separation
ABO3−δ perovskites are ideal for high‐temperature thermochemical air separation for oxygen production because their oxygen nonstoichiometry δ can be varied in response to changes in temperature and oxygen partial pressure [ ]. Herein, the outstanding oxygen‐sorption performance of CaCoxZr1−xO3−δ perovskites and their potential application as oxygen‐selective sorbents for air separation is reported. In situ thermal X‐ray diffraction was used to study the materials’ structural changes in response to temperature variations in air and inert atmosphere. Temperature‐programmed reduction was employed to elucidate the relationship between perovskite composition and redox property. O2 sorption performance was evaluated by isothermal analyses at various temperature and along with long‐term absorption–desorption cycle tests. The high oxygen‐sorption capacity was mainly attributed to Co at B‐site, whereas partial substitution of Co by Zr enhanced the structural crystallinity and thermal stability of the perovskite. A stable oxygen production of 2.87 wt % was observed at 900 °C during 5 min‐sorption cycles for 100 cycles.
- 12 April 2019
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 11 (17) , 15638-15645
Synthesis of Soluble Metal Organic Framework Composites for Mixed Matrix Membranes
A general, green, efficient and easily scalable methodology has been developed to more effectively incorpo-rate (disperse) MOFs into polymer technologies via solid state synthesis of any MOF nanocrystals within sol-uble mesoporous polymers. The resulting solid hybrid materials (pellets) can be directly transformed into colloidal MOF polymeric suspensions (inks) by simple dissolution in organic solvents. The straightforward use of novel colloidal MOF polymeric inks as ultimate additive for mixed matrix membranes resulted in un-precedented snakeskin microstructure exhibiting outstanding selectivity for CO2 over N2 (>100) from post-combustion flue gas at very low and well-dispersed MOF nanocrystal concentrations ranging from 1 to 7 wt.%. This novel methodology brings one of the most versatile routes yet reported to transform any MOF into more functional forms that can be directly integrated into any conventional polymer technology at the com-mercial scale.
- 12 April 2019
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 11 (17) , 15638-15645
Synthesis of Soluble Metal Organic Framework Composites for Mixed Matrix Membranes
A general, green, efficient and easily scalable methodology has been developed to more effectively incorpo-rate (disperse) MOFs into polymer technologies via solid state synthesis of any MOF nanocrystals within sol-uble mesoporous polymers. The resulting solid hybrid materials (pellets) can be directly transformed into colloidal MOF polymeric suspensions (inks) by simple dissolution in organic solvents. The straightforward use of novel colloidal MOF polymeric inks as ultimate additive for mixed matrix membranes resulted in un-precedented snakeskin microstructure exhibiting outstanding selectivity for CO2 over N2 (>100) from post-combustion flue gas at very low and well-dispersed MOF nanocrystal concentrations ranging from 1 to 7 wt.%. This novel methodology brings one of the most versatile routes yet reported to transform any MOF into more functional forms that can be directly integrated into any conventional polymer technology at the com-mercial scale.
- 24 January 2019
- Published by American Chemical Society (ACS) in Journal of Chemical & Engineering Data
- Vol. 64 (2) , 545-556
Experimental Study of a Hydrophobic Solvent for Natural Gas Sweetening Based on the Solubility and Selectivity for Light Hydrocarbons (CH4, C2H6) and Acid Gases (CO2 and H2S) at 298–353 K
- 24 January 2019
- Published by American Chemical Society (ACS) in Journal of Chemical & Engineering Data
- Vol. 64 (2) , 545-556
Experimental Study of a Hydrophobic Solvent for Natural Gas Sweetening Based on the Solubility and Selectivity for Light Hydrocarbons (CH4, C2H6) and Acid Gases (CO2 and H2S) at 298–353 K
- 10 December 2018
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 58 (1) , 334-341
Task-Specific Ionic Liquids Functionalized by Cobalt(II) Salen for Room Temperature Biomimetic Dioxygen Binding
- 10 December 2018
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 58 (1) , 334-341
Task-Specific Ionic Liquids Functionalized by Cobalt(II) Salen for Room Temperature Biomimetic Dioxygen Binding