Igor Kuzio
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Igor Kuzio has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Volodymyr Gurskyi
Lviv Polytechnic National University
4 shared publications Lviv Polytechnic National University
3 shared publications- Pavlo Krot
Wroclaw University of Science and Technology
2 shared publications - Petro Pukach
Department of Computational Mathematics and Programming, Institute of Applied Mathematics and Fundamental Sciences, Lviv Polytechnic National University, 12 Bandera Str., 79013 Lviv, Ukraine
2 shared publications - Radoslaw Zimroz
Wroclaw University of Science and Technology
2 shared publications - Yurii Sholoviy2 shared publications
Latest Publications
- 25 May 2022
- Published by Springer Nature
- p. 91-100
A New Method of Optimization Synthesis of Vibro-Impact Systems
- 25 May 2022
- Published by Springer Nature
- p. 91-100
A New Method of Optimization Synthesis of Vibro-Impact Systems
- 30 April 2022
- Published by Springer Nature
- p. 267-282
Experimental Study of the Rolling Friction Coefficient in Highly Loaded Supports of Rotary Kilns
- 30 April 2022
- Published by Springer Nature
- p. 267-282
Experimental Study of the Rolling Friction Coefficient in Highly Loaded Supports of Rotary Kilns
- 1 January 2022
- Published by Lviv Polytechnic National University in Avtomatizacìâ virobničih procesìv u mašinobuduvannì ta priladobuduvannì
- Vol. 56, 39-47
Моделювання динаміки систем змінної структури на прикладі руху інерційного збудника на пружних опорах
Goalof the articleis to develop a mathematical model of the behavior of thevariable structure system that are affected by oscillations. The dynamic of variable structure systems is considered on the example of аmotion of theinertial vibrating exciter on elastic supports.Significance. A large number of mathematical models of elastic system dynamic under the action of moving inertial load mostly coversonly the general approach to solving these problems, or describes a specific type of equipment that is narrowly used in certain industries. The proposed mathematical model of the oscillating system offers much greater possibilities. It allows to modify the developed approach to modeling the dynamic of variable structure systems depending on their parameters. Method. Using theLagrange's equations of the second kind, the dynamic of the inertial vibration exciter on elastic supports is modeled and the factors influencing its behavior are analyzed. Results. The presented mathematical model of the massive body behavior on elastic supports with a rigidly mounted shaft allows to substantiate the inertial-rigid and force parameters of the oscillatory system. Scientific novelty.A mathematical model of the body behavior on elastic supports with a rigidly mounted shaft, which transmits rotational motion to two imbalances through an elastic connection, has been developed. Practical significance.The proposed method of calculations allows furtherto investigate ways to stabilize the variable structure system and reduce the inertial load onstructural elements, which allowsto justifythe necessary parameters of technical systems.
- 1 January 2022
- Published by Lviv Polytechnic National University in Avtomatizacìâ virobničih procesìv u mašinobuduvannì ta priladobuduvannì
- Vol. 56, 39-47
Моделювання динаміки систем змінної структури на прикладі руху інерційного збудника на пружних опорах
Goalof the articleis to develop a mathematical model of the behavior of thevariable structure system that are affected by oscillations. The dynamic of variable structure systems is considered on the example of аmotion of theinertial vibrating exciter on elastic supports.Significance. A large number of mathematical models of elastic system dynamic under the action of moving inertial load mostly coversonly the general approach to solving these problems, or describes a specific type of equipment that is narrowly used in certain industries. The proposed mathematical model of the oscillating system offers much greater possibilities. It allows to modify the developed approach to modeling the dynamic of variable structure systems depending on their parameters. Method. Using theLagrange's equations of the second kind, the dynamic of the inertial vibration exciter on elastic supports is modeled and the factors influencing its behavior are analyzed. Results. The presented mathematical model of the massive body behavior on elastic supports with a rigidly mounted shaft allows to substantiate the inertial-rigid and force parameters of the oscillatory system. Scientific novelty.A mathematical model of the body behavior on elastic supports with a rigidly mounted shaft, which transmits rotational motion to two imbalances through an elastic connection, has been developed. Practical significance.The proposed method of calculations allows furtherto investigate ways to stabilize the variable structure system and reduce the inertial load onstructural elements, which allowsto justifythe necessary parameters of technical systems.
- 1 January 2022
- Published by Lviv Polytechnic National University in Avtomatizacìâ virobničih procesìv u mašinobuduvannì ta priladobuduvannì
- Vol. 56, 19-26
Вплив накопичуваної пошкоджуваності на експлуатаційний ресурс барабана котлоагрегата теплоелектростанції
Goal of the work is to develop a methodology for researching the possibility of further exploitation of drums of boiler units of thermal power plants after exhausting their park resource. Significance. During long-term operation of the drums of boiler units of TPP power units, which work under the action of high pressure, elevated temperature, repeatedly changing cyclic loads, the influence of a corrosive-active working environment, a water-steam mixture, the stressed metal of the drums degrades, various kinds of defects are formed in the vicinity of the stress concentrators and damage that can lead to failure and even large-scale catastrophic destruction. The proposed method makes it possible to establish the residual operational resource of the drums and outline the ways of their more economical operation. Method. The method of computer modeling of the processes of deformation of the drum of a high-pressure boiler under different modes of its operation is built on the basis of spatial-three-dimensional thermoelasticity ratios using the finite element method. Results. The developed technique makes it possible to establish the total value of the parameter of the accumulated damage of the metal of the drum and its residual operational resource. Scientific novelty. A methodology for researching the condition of drums of boiler units of thermal power plants according to the level of accumulated metal damage has been developed, taking into account the determined maximum stresses under different modes of their industrial operation. Practical significance. The proposed modeling technique will make it possible to establish the remaining operational resource of the drums of boiler units of thermal power plants and outline the ways of their more economical operation.
- 1 January 2022
- Published by Lviv Polytechnic National University in Avtomatizacìâ virobničih procesìv u mašinobuduvannì ta priladobuduvannì
- Vol. 56, 19-26
Вплив накопичуваної пошкоджуваності на експлуатаційний ресурс барабана котлоагрегата теплоелектростанції
Goal of the work is to develop a methodology for researching the possibility of further exploitation of drums of boiler units of thermal power plants after exhausting their park resource. Significance. During long-term operation of the drums of boiler units of TPP power units, which work under the action of high pressure, elevated temperature, repeatedly changing cyclic loads, the influence of a corrosive-active working environment, a water-steam mixture, the stressed metal of the drums degrades, various kinds of defects are formed in the vicinity of the stress concentrators and damage that can lead to failure and even large-scale catastrophic destruction. The proposed method makes it possible to establish the residual operational resource of the drums and outline the ways of their more economical operation. Method. The method of computer modeling of the processes of deformation of the drum of a high-pressure boiler under different modes of its operation is built on the basis of spatial-three-dimensional thermoelasticity ratios using the finite element method. Results. The developed technique makes it possible to establish the total value of the parameter of the accumulated damage of the metal of the drum and its residual operational resource. Scientific novelty. A methodology for researching the condition of drums of boiler units of thermal power plants according to the level of accumulated metal damage has been developed, taking into account the determined maximum stresses under different modes of their industrial operation. Practical significance. The proposed modeling technique will make it possible to establish the remaining operational resource of the drums of boiler units of thermal power plants and outline the ways of their more economical operation.
- Open Access
- 18 June 2021
- Published by Lviv Polytechnic National University in Transport technologies
- Vol. 2021 (1) , 60-74
The influence of degree of loading and load placing on steerability of vehicles
The methodology of research of the influence of the degree of loading, kinematic parameters of movement, and nonlinear power characteristics of elastic elements and shock-absorbers of the suspension system on their steerability on curved sections of the road is developed. The research is based on the equation of kinetostatics of the system of sprung-unsprung part and differential equations that relate the motion of the sprung part of vehicles. Concerning the last, they take into account both loading of a vehicle and nonlinear-elastic characteristics of shock-absorbers. For the case when elastic characteristics of shock-absorbers are described by degree or close to it dependence, the fluctuation of sprung part is described analytically. Their peculiarity is that the frequency and therefore dynamic force of wheels pressure on the bearing surface (road) depends on the amplitude. It is the last value and characteristics of the road surface that determine the main parameters of steerability and stability of the movement of wheeled vehicles along curved sections of the road. Taken together, the mentioned above allowed to obtain the dependence of the critical value of the dynamic angle of rotation of the steered wheels, as a function of the amplitude of longitudinal-angular oscillations, kinematic motion parameters, and the level of loading of a vehicle. It is established: - fluctuation of the sprung part significantly reduce the value of the limiting angle of rotation of the steered wheels along the curved sections of the road; - for the period of acceleration of the vehicle and the closer location of the center of gravity of the cargo transported to the tailgate, the limit value of the dynamic angle of rotation of the steered wheels is less; - the suspension system with the progressive law of change of regenerative force of elastic shock-absorbers in a wider range of change fluctuations amplitude of the suspended part satisfies ergonomic conditions of transportation. The obtained calculated dependencies can simultaneously be basic during the modernization of existing or the creation of new suspension systems in order to improve the main operation characteristics of wheeled vehicles
- 18 June 2021
- Published by Lviv Polytechnic National University in Transport technologies
- Vol. 2021 (1) , 60-74
Open AccessThe influence of degree of loading and load placing on steerability of vehicles
The methodology of research of the influence of the degree of loading, kinematic parameters of movement, and nonlinear power characteristics of elastic elements and shock-absorbers of the suspension system on their steerability on curved sections of the road is developed. The research is based on the equation of kinetostatics of the system of sprung-unsprung part and differential equations that relate the motion of the sprung part of vehicles. Concerning the last, they take into account both loading of a vehicle and nonlinear-elastic characteristics of shock-absorbers. For the case when elastic characteristics of shock-absorbers are described by degree or close to it dependence, the fluctuation of sprung part is described analytically. Their peculiarity is that the frequency and therefore dynamic force of wheels pressure on the bearing surface (road) depends on the amplitude. It is the last value and characteristics of the road surface that determine the main parameters of steerability and stability of the movement of wheeled vehicles along curved sections of the road. Taken together, the mentioned above allowed to obtain the dependence of the critical value of the dynamic angle of rotation of the steered wheels, as a function of the amplitude of longitudinal-angular oscillations, kinematic motion parameters, and the level of loading of a vehicle. It is established: - fluctuation of the sprung part significantly reduce the value of the limiting angle of rotation of the steered wheels along the curved sections of the road; - for the period of acceleration of the vehicle and the closer location of the center of gravity of the cargo transported to the tailgate, the limit value of the dynamic angle of rotation of the steered wheels is less; - the suspension system with the progressive law of change of regenerative force of elastic shock-absorbers in a wider range of change fluctuations amplitude of the suspended part satisfies ergonomic conditions of transportation. The obtained calculated dependencies can simultaneously be basic during the modernization of existing or the creation of new suspension systems in order to improve the main operation characteristics of wheeled vehicles
- Open Access
Energy-Saving Inertial Drive for Dual-Frequency Excitation of Vibrating Machines
The low energy efficiency and excessive power of electric motors of large-scale vibrating machines for processing bulk materials motivated a new design of the inertial drive. This drive consists of one motor and two coaxial unbalanced masses, whose rotational frequencies are related in the ratio 2:1. This approach allows for a generation of the excitation force with variable amplitude and frequency, which changes depending on the inertial characteristics and shaft rotation frequency and does not relate to the phase difference of the unbalanced masses. Because of this, the symmetry axis of the resulting vector hodograph can be changed. The spectral composition of the exciting force up to 200 Hz contains higher harmonics, the energy share of which is 25.4% from the 2nd harmonic and 14.1% from the 3rd and higher harmonics that correspondingly improves bulk material treatment in comparison to single-frequency vibrators. The finite element model is used for checking the strength capacity of the most loaded units of a dual-frequency drive. Its use allows the realization of complex trajectories of motion that are more technologically efficient for variable parameters of the treated media and energy saving in sieving screens and other vibrating machines.
Open AccessEnergy-Saving Inertial Drive for Dual-Frequency Excitation of Vibrating Machines
The low energy efficiency and excessive power of electric motors of large-scale vibrating machines for processing bulk materials motivated a new design of the inertial drive. This drive consists of one motor and two coaxial unbalanced masses, whose rotational frequencies are related in the ratio 2:1. This approach allows for a generation of the excitation force with variable amplitude and frequency, which changes depending on the inertial characteristics and shaft rotation frequency and does not relate to the phase difference of the unbalanced masses. Because of this, the symmetry axis of the resulting vector hodograph can be changed. The spectral composition of the exciting force up to 200 Hz contains higher harmonics, the energy share of which is 25.4% from the 2nd harmonic and 14.1% from the 3rd and higher harmonics that correspondingly improves bulk material treatment in comparison to single-frequency vibrators. The finite element model is used for checking the strength capacity of the most loaded units of a dual-frequency drive. Its use allows the realization of complex trajectories of motion that are more technologically efficient for variable parameters of the treated media and energy saving in sieving screens and other vibrating machines.
- 1 February 2020
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 1,p. 46-51
Two-dimensional elastic theory methods for describing the stress state and the modes of elastic boring
- 1 February 2020
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 1,p. 46-51
Two-dimensional elastic theory methods for describing the stress state and the modes of elastic boring
- 1 August 2019
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 4
Dynamics of the two-drum electromechanical drive of suspended timbertransporting cable system
Dynamics of the two-drum electromechanical drive of suspended timbertransporting cable system
- 1 August 2019
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 4
Dynamics of the two-drum electromechanical drive of suspended timbertransporting cable system
Dynamics of the two-drum electromechanical drive of suspended timbertransporting cable system
- 1 January 2018
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- Vol. 1, 68-73
Asymptotic method for investigating resonant regimes of nonlinear bending vibrations of elastic shaft
Asymptotic method for investigating resonant regimes of nonlinear bending vibrations of elastic shaft
- 1 January 2018
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- Vol. 1, 68-73
Asymptotic method for investigating resonant regimes of nonlinear bending vibrations of elastic shaft
Asymptotic method for investigating resonant regimes of nonlinear bending vibrations of elastic shaft
- Open Access
- 31 October 2016
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (7 (83)) , 4-10
Strength and durability analysis of a flat spring at vibro-impact loadings
Strength and durability analysis of a flat spring at vibro-impact loadings
- 31 October 2016
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (7 (83)) , 4-10
Open AccessStrength and durability analysis of a flat spring at vibro-impact loadings
Strength and durability analysis of a flat spring at vibro-impact loadings