Javier Cardona
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Javier Cardona has a total of 79 co-authors. Here are the top co-authors by number of shared publications:
- Christos Tachtatzis
Department of Electronic and Electrical Engineering, University of Strathclyde, Glasgow, UK
13 shared publications - Ivan Andonovic
Department of Electronic and Electrical Engineering, University of Strathclyde, Glasgow, UK
12 shared publications - Robert Atkinson
University of Strathclyde, Glasgow, Scotland
7 shared publications - W. Craig Michie
Department of Electronic and Electrical Engineering, University of Strathclyde, Glasgow, UK
6 shared publications Jan Sefcik
5 shared publications- Mikolaj Czerkawski
Department of Electronic and Electrical Engineering, University of Strathclyde, Glasgow G1 1XW, UK
5 shared publications
Latest Publications
- Open Access
- 29 July 2026
- Published by Springer Nature in Analytical and Bioanalytical Chemistry
- Vol. 418  (21) , 7003-7017
Spatially and angularly resolved spectroscopy for in situ estimation of particle size and concentration in particle suspensions
- 29 July 2026
- Published by Springer Nature in Analytical and Bioanalytical Chemistry
- Vol. 418  (21) , 7003-7017
Open AccessSpatially and angularly resolved spectroscopy for in situ estimation of particle size and concentration in particle suspensions
- Open Access
- 12 March 2024
- Published by MDPI AG in Journal of Imaging
- Vol. 10  (3) , 69
Multi-Modal Convolutional Parameterisation Network for Guided Image Inverse Problems
There are several image inverse tasks, such as inpainting or super-resolution, which can be solved using deep internal learning, a paradigm that involves employing deep neural networks to find a solution by learning from the sample itself rather than a dataset. For example, Deep Image Prior is a technique based on fitting a convolutional neural network to output the known parts of the image (such as non-inpainted regions or a low-resolution version of the image). However, this approach is not well adjusted for samples composed of multiple modalities. In some domains, such as satellite image processing, accommodating multi-modal representations could be beneficial or even essential. In this work, Multi-Modal Convolutional Parameterisation Network (MCPN) is proposed, where a convolutional neural network approximates shared information between multiple modes by combining a core shared network with modality-specific head networks. The results demonstrate that these approaches can significantly outperform the single-mode adoption of a convolutional parameterisation network on guided image inverse problems of inpainting and super-resolution.
- 12 March 2024
- Published by MDPI AG in Journal of Imaging
- Vol. 10  (3) , 69
Open AccessMulti-Modal Convolutional Parameterisation Network for Guided Image Inverse Problems
There are several image inverse tasks, such as inpainting or super-resolution, which can be solved using deep internal learning, a paradigm that involves employing deep neural networks to find a solution by learning from the sample itself rather than a dataset. For example, Deep Image Prior is a technique based on fitting a convolutional neural network to output the known parts of the image (such as non-inpainted regions or a low-resolution version of the image). However, this approach is not well adjusted for samples composed of multiple modalities. In some domains, such as satellite image processing, accommodating multi-modal representations could be beneficial or even essential. In this work, Multi-Modal Convolutional Parameterisation Network (MCPN) is proposed, where a convolutional neural network approximates shared information between multiple modes by combining a core shared network with modality-specific head networks. The results demonstrate that these approaches can significantly outperform the single-mode adoption of a convolutional parameterisation network on guided image inverse problems of inpainting and super-resolution.
- Open Access
- 4 March 2024
- Published by Elsevier in Pattern Recognition
- Vol. 151
Neural Knitworks: Patched neural implicit representation networks
- 4 March 2024
- Published by Elsevier in Pattern Recognition
- Vol. 151
Open AccessNeural Knitworks: Patched neural implicit representation networks
- Open Access
- 8 January 2024
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 26  (6) , 822-834
Developing a model-driven workflow for the digital design of small-scale batch cooling crystallisation with the antiviral lamivudine
We present a workflow that uses digital tools to optimise the experimental approach and maximise the efficiency in achieving the required process parameters for a desired set of crystallisation responses, kinetics and objectives. Model-driven small-scale experiments can contribute to reducing time and material waste in the development of pharmaceutical crystallisation processes. The workflow presented here guides the development of a small-scale batch cooling crystallisation process via solubility measurements, particle shape and size determination, form identification and preliminary kinetic parameter estimation to make crystals that satisfy quality target parameters (for shape, size and solubility) for a given active pharmaceutical ingredient (API). The case study herein follows the development of a crystallisation process for lamivudine, an API used in the preventative treatment of human immunodeficiency virus (HIV). This work identifies ethanol as a suitable solvent, meeting the acceptable solubility parameters for industrially relevant processes and yielded the biorelevant form, form I. The target kinetic parameters that were measured included induction time, growth rate and nucleation rate for lamivudine in ethanol under a range of conditions as guided by experimental planning models. Data was collected as part of the development of a DataFactory platform in which experimental optimisation can be autonomously implemented and all measurements stored in a crystallisation parameter database. This database will have further value in informing model development and continuous crystallisation process design and optimisation. The model objective-driven development workflow identified the following conditions, 19.9 °C, 600 RPM and supersaturation of 1.70, as achieving the desired objective successfully in 80 polythermal and 28 isothermal experiments. Integration of the workflow alongside the optimisation algorithm within the automated DataFactory system will enable fully autonomous, rapid data collection for small-scale API crystallisation. Such autonomous systems could play vital roles in pharmaceutical development and manufacturing driving towards more efficient and sustainable practices via digital transformation.
- 8 January 2024
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 26  (6) , 822-834
Open AccessDeveloping a model-driven workflow for the digital design of small-scale batch cooling crystallisation with the antiviral lamivudine
We present a workflow that uses digital tools to optimise the experimental approach and maximise the efficiency in achieving the required process parameters for a desired set of crystallisation responses, kinetics and objectives. Model-driven small-scale experiments can contribute to reducing time and material waste in the development of pharmaceutical crystallisation processes. The workflow presented here guides the development of a small-scale batch cooling crystallisation process via solubility measurements, particle shape and size determination, form identification and preliminary kinetic parameter estimation to make crystals that satisfy quality target parameters (for shape, size and solubility) for a given active pharmaceutical ingredient (API). The case study herein follows the development of a crystallisation process for lamivudine, an API used in the preventative treatment of human immunodeficiency virus (HIV). This work identifies ethanol as a suitable solvent, meeting the acceptable solubility parameters for industrially relevant processes and yielded the biorelevant form, form I. The target kinetic parameters that were measured included induction time, growth rate and nucleation rate for lamivudine in ethanol under a range of conditions as guided by experimental planning models. Data was collected as part of the development of a DataFactory platform in which experimental optimisation can be autonomously implemented and all measurements stored in a crystallisation parameter database. This database will have further value in informing model development and continuous crystallisation process design and optimisation. The model objective-driven development workflow identified the following conditions, 19.9 °C, 600 RPM and supersaturation of 1.70, as achieving the desired objective successfully in 80 polythermal and 28 isothermal experiments. Integration of the workflow alongside the optimisation algorithm within the automated DataFactory system will enable fully autonomous, rapid data collection for small-scale API crystallisation. Such autonomous systems could play vital roles in pharmaceutical development and manufacturing driving towards more efficient and sustainable practices via digital transformation.
- Open Access
- 14 December 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14  (24) , 6324
Correction: Czerkawski et al. Deep Internal Learning for Inpainting of Cloud-Affected Regions in Satellite Imagery. Remote Sens. 2022, 14, 1342
Following the publication of the article
- 14 December 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14  (24) , 6324
Open AccessCorrection: Czerkawski et al. Deep Internal Learning for Inpainting of Cloud-Affected Regions in Satellite Imagery. Remote Sens. 2022, 14, 1342
Following the publication of the article
- 1 April 2022
- Published by Elsevier in Chemical Engineering Science
- Vol. 252
Effect of oscillatory flow conditions on crystalliser fouling investigated through non-invasive imaging
- 1 April 2022
- Published by Elsevier in Chemical Engineering Science
- Vol. 252
Effect of oscillatory flow conditions on crystalliser fouling investigated through non-invasive imaging
- Open Access
- 10 March 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14  (6) , 1342
Deep Internal Learning for Inpainting of Cloud-Affected Regions in Satellite Imagery
Cloud cover remains a significant limitation to a broad range of applications relying on optical remote sensing imagery, including crop identification/yield prediction, climate monitoring, and land cover classification. A common approach to cloud removal treats the problem as an inpainting task and imputes optical data in the cloud-affected regions employing either mosaicing historical data or making use of sensing modalities not impacted by cloud obstructions, such as SAR. Recently, deep learning approaches have been explored in these applications; however, the majority of reported solutions rely on external learning practices, i.e., models trained on fixed datasets. Although these models perform well within the context of a particular dataset, a significant risk of spatial and temporal overfitting exists when applied in different locations or at different times. Here, cloud removal was implemented within an internal learning regime through an inpainting technique based on the deep image prior. The approach was evaluated on both a synthetic dataset with an exact ground truth, as well as real samples. The ability to inpaint the cloud-affected regions for varying weather conditions across a whole year with no prior training was demonstrated, and the performance of the approach was characterised.
- 10 March 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14  (6) , 1342
Open AccessDeep Internal Learning for Inpainting of Cloud-Affected Regions in Satellite Imagery
Cloud cover remains a significant limitation to a broad range of applications relying on optical remote sensing imagery, including crop identification/yield prediction, climate monitoring, and land cover classification. A common approach to cloud removal treats the problem as an inpainting task and imputes optical data in the cloud-affected regions employing either mosaicing historical data or making use of sensing modalities not impacted by cloud obstructions, such as SAR. Recently, deep learning approaches have been explored in these applications; however, the majority of reported solutions rely on external learning practices, i.e., models trained on fixed datasets. Although these models perform well within the context of a particular dataset, a significant risk of spatial and temporal overfitting exists when applied in different locations or at different times. Here, cloud removal was implemented within an internal learning regime through an inpainting technique based on the deep image prior. The approach was evaluated on both a synthetic dataset with an exact ground truth, as well as real samples. The ability to inpaint the cloud-affected regions for varying weather conditions across a whole year with no prior training was demonstrated, and the performance of the approach was characterised.
- Open Access
- 24 February 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14  (5) , 1120
A Flexible Multi-Temporal and Multi-Modal Framework for Sentinel-1 and Sentinel-2 Analysis Ready Data
The rich, complementary data provided by Sentinel-1 and Sentinel-2 satellite constellations host considerable potential to transform Earth observation (EO) applications. However, a substantial amount of effort and infrastructure is still required for the generation of analysis-ready data (ARD) from the low-level products provided by the European Space Agency (ESA). Here, a flexible Python framework able to generate a range of consistent ARD aligned with the ESA-recommended processing pipeline is detailed. Sentinel-1 Synthetic Aperture Radar (SAR) data are radiometrically calibrated, speckle-filtered and terrain-corrected, and Sentinel-2 multi-spectral data resampled in order to harmonise the spatial resolution between the two streams and to allow stacking with multiple scene classification masks. The global coverage and flexibility of the framework allows users to define a specific region of interest (ROI) and time window to create geo-referenced Sentinel-1 and Sentinel-2 images, or a combination of both with closest temporal alignment. The framework can be applied to any location and is user-centric and versatile in generating multi-modal and multi-temporal ARD. Finally, the framework handles automatically the inherent challenges in processing Sentinel data, such as boundary regions with missing values within Sentinel-1 and the filtering of Sentinel-2 scenes based on ROI cloud coverage.
- 24 February 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14  (5) , 1120
Open AccessA Flexible Multi-Temporal and Multi-Modal Framework for Sentinel-1 and Sentinel-2 Analysis Ready Data
The rich, complementary data provided by Sentinel-1 and Sentinel-2 satellite constellations host considerable potential to transform Earth observation (EO) applications. However, a substantial amount of effort and infrastructure is still required for the generation of analysis-ready data (ARD) from the low-level products provided by the European Space Agency (ESA). Here, a flexible Python framework able to generate a range of consistent ARD aligned with the ESA-recommended processing pipeline is detailed. Sentinel-1 Synthetic Aperture Radar (SAR) data are radiometrically calibrated, speckle-filtered and terrain-corrected, and Sentinel-2 multi-spectral data resampled in order to harmonise the spatial resolution between the two streams and to allow stacking with multiple scene classification masks. The global coverage and flexibility of the framework allows users to define a specific region of interest (ROI) and time window to create geo-referenced Sentinel-1 and Sentinel-2 images, or a combination of both with closest temporal alignment. The framework can be applied to any location and is user-centric and versatile in generating multi-modal and multi-temporal ARD. Finally, the framework handles automatically the inherent challenges in processing Sentinel data, such as boundary regions with missing values within Sentinel-1 and the filtering of Sentinel-2 scenes based on ROI cloud coverage.
- 1 October 2020
- Published by Elsevier in Powder Technology
- Vol. 376, 1-11
Quantification of particle size and concentration using in-line techniques and multivariate analysis
- 1 October 2020
- Published by Elsevier in Powder Technology
- Vol. 376, 1-11
Quantification of particle size and concentration using in-line techniques and multivariate analysis
- 15 September 2020
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 22  (38) , 21741-21749
Simple corrections for the static dielectric constant of liquid mixtures from model force fields
A correction scheme to improve predictions of dielectric constants of liquid mixtures from pair-wise additive force fields that considers electronic polarizability contributions and charge scaling.
- 15 September 2020
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 22  (38) , 21741-21749
Simple corrections for the static dielectric constant of liquid mixtures from model force fields
A correction scheme to improve predictions of dielectric constants of liquid mixtures from pair-wise additive force fields that considers electronic polarizability contributions and charge scaling.