Georgiana Maries

New methodologies in education are extremely important in a globalized world where knowledge transfer is absorbed at an extremely fast pace. Virtual Reality is part of the digital transition, having a wide range of advantages such us: ease to participate in immersive content, support both image and sound, as well as the possibility to conduct training from a distance having the trainer in one location and the trainee in another location. Multimedia content related to sustainability, renewable energy, circular economy has been produced and integrated into virtual scenarios in a very appealing way within the framework of an international Erasmus+ Project with four partners in four European countries.

Two 2D reflection seismic profiles were acquired in Blötberget, south-central Sweden, for deep targeting and delineation of sheet-like iron-oxide deposits, known to dip toward the southeast and extend down to at least 0.8 km depth from core drilling observations. The two perpendicular profiles recorded shots at every receiver station along the main and cross profiles. To obtain more information on the lateral extent of the mineralized horizons, data from the two profiles, including the cross-profile records, were binned together in a 3D grid and further processed as a 3D data set. Processing results suggest that more information is retrieved when 3D processing is used and the mineralization lateral extent can be inferred for at least 0.3 km. The seismic response of the mineralization was further studied through forward reflection traveltime modeling, using a 3D ray-tracing approach; thus, the 3D geometry of several planar reflectors was validated. Additionally, 2D elastic finite-difference modeling work showed that the observed reflection pattern in the seismic data may originate from several mineralized horizons, suggesting potential resources in the footwall of the known deposits and large-scale geologic structures. The results encourage the use of seismic methods for direct delineation of mineral deposits even from 2D profiles and prompted a 3D survey in the area.

Reflection seismic data were acquired within two field campaigns in the Blötberget, Ludvika mining area of central Sweden, for deep imaging of iron‐oxide mineralization that were known to extend down to 800–850 m depth. The two surveys conducted in years 2015 and 2016, one employing a seismic landstreamer and geophones connected to wireless recorders, and another one using cabled geophones and wireless recorders, aimed to delineate the geometry and depth extent of the iron‐oxide mineralization for when mining commences in the area. Even with minimal and conventional processing approaches, the merged datasets provide encouraging information about the depth continuation of the mineralized horizons and the geological setting of the study area. Multiple sets of strong reflections represent a possible continuation of the known deposits that extend approximately 300 m further down‐dip than the known 850 m depth obtained from historical drilling. They show excellent correlation in shape and strength with those of the Blötberget deposits. Furthermore, several reflections in the footwall of the known mineralization can potentially be additional resources underlying the known ones. The results from these seismic surveys are encouraging for mineral exploration purposes given the good quality of the final section and fast seismic surveys employing a simple cost‐effective and easily available impact‐type seismic source.

We deployed a newly developed 3C microelectromechanical system-based seismic land streamer over porous glacial sediments to delineate water table and bedrock in Southwestern Finland. The seismic source used was a 500 kg vertical impact drop hammer. We analyzed the SH-wave component and interpreted it together with previously analyzed P-wave component data. In addition to this, we examined the land streamer’s potential for multichannel analysis of surface waves and delineated the site’s stratigraphy with surface-wave-derived S-wave velocities and VP/VS ratios along the entire profile. These S-wave velocities and VP/VS ratios complement the interpretation conducted previously on P-wave stacked section. Peculiarly, although the seismic source used is of a vertical-type nature, the data inspection indicated clear bedrock reflection on the horizontal components, particularly the transverse component. This observation led us to scrutinize the horizontal component data through side-by-side inspection of the shot records of all the three components and particle motion analysis to confirm the S-wave nature of the reflection. Using the apparent moveout velocity of the reflection, as well as the known depth to bedrock based on drilling, we used finite-difference synthetic modeling to further verify its nature. Compared with the P-wave seismic section, bedrock is relatively well delineated on the transverse component S-wave section. Some structures connected to the kettle holes and other stratigraphic units imaged on the P-wave results were also notable on the S-wave section, and particularly on the surface-wave derived S-wave velocity model and VP/VS ratios. Our results indicate that P-, SV-, and SH-wave energy is generated simultaneously at the source location itself. This study demonstrates the potential of 3C seismic for characterization and delineation of the near-surface seismics.

To be fully embraced into mineral exploration, seismic data require to be acquired fast, cheaper and with minimum environmental impacts addressing also the often brown-field highly noisy environment where these surveys are employed. Since 2013 and through a number of case studies, we have been testing a newly developed for urban environment, digital-based 240 m long, seismic landstreamer for mine planning and mineral exploration purposes. Here, we present a pilot study examining the potential of the streamer for deep targeting a known, down to approximately 850 m depth, iron-oxide mineralization in the Bergslagen mineral district of central Sweden. Combined streamer (100-3C-MEMS (micro-electromechanical system), 2–4 m spacing) and 75 wireless recorders (mixed 10 Hz and MEMS, 10 m spacing) were used. A Bobcat-mounted drophammer, 500 kg, was used to generate the seismic signal. Within 4 days, approximately 3.5 km of seismic data using 2–10 m source and receiver spacing were acquired. Reflection data processing results clearly image the mineralization as a set of strong high-amplitude reflections and likely slightly extending beyond the known 850 m depth. This is encouraging and suggests such a cost-effective exploration method can be used in the area and elsewhere to delineate similar depth range iron-oxide deposits.

We tested the applicability of a newly developed broadband (0–800 Hz) digital-based seismic landstreamer for open-pit mine planning in the apatite-bearing Siilinjärvi mine in central Finland. Four seismic profiles, in total approximately 2.5 km long (2–4 m source and landstreamer receiver spacing), two inside the pit and two on its margins, were acquired in combination with wireless recorders connected to 10 Hz geophones and fixed at every 10 m spacing along the seismic profiles while the streamer data were being acquired. Downhole logging and laboratory physical property measurements on core and rock samples were carried out to not only support the seismic interpretations but also to provide information about the possible geophysical signature of these unique types of deposits. In spite of a highly noisy mining environment, seismic data of high quality were acquired; however, reflection processing and interpretations were challenged by the geologic complexities of several generations of basic and carbonatite dikes. To complement the reflection data imaging and to account for the steep elevation changes and crookedness of some of the seismic profiles, 3D first-arrival traveltime tomography and 3D swath reflection imaging were also carried out. Clear refracted arrivals from the open-pit profiles suggest the possibility of low-velocity zones associated with either blasting or several shear zones intersecting the seismic profiles. In terms of reflectivity, reflections have a different appearance from short and flat to longer and steep ones. The downhole- and borehole logging data suggest that some of these reflections are associated with diabase dikes and some are likely from zones of weaknesses in the alkaline-carbonatite complex. We determine the potential of using seismic streamers for cost- and time-effective open-pit mine planning and encourage further testing in simpler geologic settings to be established.