Silvia Dalla Torre
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Silvia Dalla Torre has a total of 126 co-authors. Here are the top co-authors by number of shared publications:
F. Tessarotto
INFN Sezione di Trieste Trieste Italy
9 shared publicationsG. Menon
INFN Sezione di Trieste Trieste Italy
9 shared publicationsS. Levorato
INFN Sezione di Trieste Trieste Italy
9 shared publicationsA. Bressan
INFN Sezione di Trieste Trieste Italy
8 shared publicationsF. Bradamante
INFN Sezione di Trieste Trieste Italy
8 shared publicationsM. Gregori
INFN Sezione di Trieste Trieste Italy
8 shared publications
Latest Publications
- Open Access
Long term experience with perfluorobutane in COMPASS RICH
COMPASS RICH-1 has used high-purity perfluorobutane as radiator gas since 2001. The operation and control of the radiator gas has evolved over years with continuous improvements. We report on the experience gained in the 20 year-long operation of perfluorobutane as COMPASS RICH radiator. Very accurate values for the radiator gas refractive index are needed for high-performance particle identification. The procedure has evolved over years and the one presently in use, which provides refractive index estimate at the 1 ppm level, is discussed. Perfluorobutane procurement is becoming challenging, and the minimization of material waste is now a priority for the protection of the environment. Commercially available perfluorobutane needs dedicated filtering before usage and typical material losses in the filtering procedure were around 30%. Recent efforts allowed us to reduce them to about 5%. A potential alternative to fluorocarbon radiators in gaseous RICHes is also presented.
Open AccessLong term experience with perfluorobutane in COMPASS RICH
COMPASS RICH-1 has used high-purity perfluorobutane as radiator gas since 2001. The operation and control of the radiator gas has evolved over years with continuous improvements. We report on the experience gained in the 20 year-long operation of perfluorobutane as COMPASS RICH radiator. Very accurate values for the radiator gas refractive index are needed for high-performance particle identification. The procedure has evolved over years and the one presently in use, which provides refractive index estimate at the 1 ppm level, is discussed. Perfluorobutane procurement is becoming challenging, and the minimization of material waste is now a priority for the protection of the environment. Commercially available perfluorobutane needs dedicated filtering before usage and typical material losses in the filtering procedure were around 30%. Recent efforts allowed us to reduce them to about 5%. A potential alternative to fluorocarbon radiators in gaseous RICHes is also presented.
- Open Access
- 1 July 2023
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 18 (07) , C07010
The ECFA Detector R&D Roadmap
A Detector R&D Roadmap process was requested to ECFA by the conclusive documents of the European Particle Physic Strategy Upgrade. The Roadmap process, its outcome and its current implementation are summarized.
- 1 July 2023
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 18 (07) , C07010
Open AccessThe ECFA Detector R&D Roadmap
A Detector R&D Roadmap process was requested to ECFA by the conclusive documents of the European Particle Physic Strategy Upgrade. The Roadmap process, its outcome and its current implementation are summarized.
- Open Access
The Electron-Ion Collider -- A U.S. facility for the European community to explore the mysteries of the building blocks of matter
This document is submitted as input to the NuPECC Long Range Plan 2024 by three European members of the EIC Users Group Steering Committee (Vice Chair, one at-large member, and the EU Representative). We submit the document on behalf of the international EIC Users Group (EICUG) community, but we specifically represent 335 European members of the EICUG (25%) based in 80 institutions (30% of the total) located in Armenia, Czech Republic, Finland, France, Germany, Hungary, Ireland, Israel, Italy, Netherlands, Norway, Poland, Slovenia, Spain, Sweden, Switzerland, Ukraine, and the United Kingdom. This European involvement is an important driver of the EIC, but can also be beneficial for a number of related ongoing and planned nuclear physics experiments in Europe. In this document, the shared interest regarding scientific questions and detector R&D between the EIC and European nuclear physics communities is outlined. The aim is to highlight how these synergies offer ample opportunities to foster progress at the forefront of nuclear physics.
Open AccessThe Electron-Ion Collider -- A U.S. facility for the European community to explore the mysteries of the building blocks of matter
This document is submitted as input to the NuPECC Long Range Plan 2024 by three European members of the EIC Users Group Steering Committee (Vice Chair, one at-large member, and the EU Representative). We submit the document on behalf of the international EIC Users Group (EICUG) community, but we specifically represent 335 European members of the EICUG (25%) based in 80 institutions (30% of the total) located in Armenia, Czech Republic, Finland, France, Germany, Hungary, Ireland, Israel, Italy, Netherlands, Norway, Poland, Slovenia, Spain, Sweden, Switzerland, Ukraine, and the United Kingdom. This European involvement is an important driver of the EIC, but can also be beneficial for a number of related ongoing and planned nuclear physics experiments in Europe. In this document, the shared interest regarding scientific questions and detector R&D between the EIC and European nuclear physics communities is outlined. The aim is to highlight how these synergies offer ample opportunities to foster progress at the forefront of nuclear physics.
- 4 October 2020
- Published by Springer Nature
- p. 509-515
Prospects for Electron-Ion Colliders
- Open Access
- 1 April 2020
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1498 (1) , 012006
The MPGD-Based Photon Detectors for the upgrade of COMPASS RICH-1
After pioneering gaseous detectors of single photon for RICH applications using CsI solid state photocathodes in MWPCs within the RD26 collaboration and by the constructions for the RICH detector of the COMPASS experiment at CERN SPS, in 2016 we have upgraded COMPASS RICH by novel gaseous photon detectors based on MPGD technology. Four novel photon detectors, covering a total active area of 1.5 m2, have been installed in order to cope with the challenging effciency and stability requirements of the COMPASS physics programme. They are the first application in an experiment of MPGD-based single photon detectors. All aspects of the upgrade are presented, including engineering, mass production, quality assessment and performance. Perspectives for further developments in the field of gaseous single photon detectors are also indicated.
- 1 April 2020
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1498 (1) , 012006
Open AccessThe MPGD-Based Photon Detectors for the upgrade of COMPASS RICH-1
After pioneering gaseous detectors of single photon for RICH applications using CsI solid state photocathodes in MWPCs within the RD26 collaboration and by the constructions for the RICH detector of the COMPASS experiment at CERN SPS, in 2016 we have upgraded COMPASS RICH by novel gaseous photon detectors based on MPGD technology. Four novel photon detectors, covering a total active area of 1.5 m2, have been installed in order to cope with the challenging effciency and stability requirements of the COMPASS physics programme. They are the first application in an experiment of MPGD-based single photon detectors. All aspects of the upgrade are presented, including engineering, mass production, quality assessment and performance. Perspectives for further developments in the field of gaseous single photon detectors are also indicated.
- Open Access
The MPGD-Based Photon Detectors for the upgrade of COMPASS RICH-1
After pioneering gaseous detectors of single photon for RICH applications using CsI solid state photocathodes in MWPCs within the RD26 collaboration and by the constructions for the RICH detector of the COMPASS experiment at CERN SPS, in 2016 we have upgraded COMPASS RICH by novel gaseous photon detectors based on MPGD technology. Four novel photon detectors, covering a total active area of 1.5~m$^2$, have been installed in order to cope with the challenging efficiency and stability requirements of the COMPASS physics programme. They are the first application in an experiment of MPGD-based single photon detectors. All aspects of the upgrade are presented, including engineering, mass production, quality assessment and performance. Perspectives for further developments in the field of gaseous single photon detectors are also indicated.
Open AccessThe MPGD-Based Photon Detectors for the upgrade of COMPASS RICH-1
After pioneering gaseous detectors of single photon for RICH applications using CsI solid state photocathodes in MWPCs within the RD26 collaboration and by the constructions for the RICH detector of the COMPASS experiment at CERN SPS, in 2016 we have upgraded COMPASS RICH by novel gaseous photon detectors based on MPGD technology. Four novel photon detectors, covering a total active area of 1.5~m$^2$, have been installed in order to cope with the challenging efficiency and stability requirements of the COMPASS physics programme. They are the first application in an experiment of MPGD-based single photon detectors. All aspects of the upgrade are presented, including engineering, mass production, quality assessment and performance. Perspectives for further developments in the field of gaseous single photon detectors are also indicated.
- Open Access
- 21 November 2018
- Published by Sissa Medialab Srl
- Vol. 322, 053
The high voltage system for the novel MPGD-based photon detectors of COMPASS RICH-1
The architecture of the novel MPGD-based photon detectors of COMPASS RICH-1 consists in a large-size hybrid MPGD multilayer layout combining two layers of Thick-GEMs and a bulk resistive MICROMEGAS. Concerning biasing voltage, the Thick-GEMs are segmented in order to reduce the energy released in case of occasional discharges, while the MICROMEGAS anode is segmented in pads individually biased at positive voltage, while the micromesh is grounded. In total, there are ten different electrode types and more than 20000 electrodes supplied by more than 100 HV channels. Commercial power supply units are used. The original elements of the power supply system are the architecture of the voltage distribution net, the compensation, by voltage adjustment, of the effects of pressure and temperature variation affecting the detector gain and a sophisticated control software, which allows to protect the detectors against errors by the operator, to monitor and log voltages and current at 1 Hz rate and to automatically react to detector misbehaviors. The HV system and its performance are described in detail as well as the electrical stability of the detector during the operation at COMPASS.
- 21 November 2018
- Published by Sissa Medialab Srl
- Vol. 322, 053
Open AccessThe high voltage system for the novel MPGD-based photon detectors of COMPASS RICH-1
The architecture of the novel MPGD-based photon detectors of COMPASS RICH-1 consists in a large-size hybrid MPGD multilayer layout combining two layers of Thick-GEMs and a bulk resistive MICROMEGAS. Concerning biasing voltage, the Thick-GEMs are segmented in order to reduce the energy released in case of occasional discharges, while the MICROMEGAS anode is segmented in pads individually biased at positive voltage, while the micromesh is grounded. In total, there are ten different electrode types and more than 20000 electrodes supplied by more than 100 HV channels. Commercial power supply units are used. The original elements of the power supply system are the architecture of the voltage distribution net, the compensation, by voltage adjustment, of the effects of pressure and temperature variation affecting the detector gain and a sophisticated control software, which allows to protect the detectors against errors by the operator, to monitor and log voltages and current at 1 Hz rate and to automatically react to detector misbehaviors. The HV system and its performance are described in detail as well as the electrical stability of the detector during the operation at COMPASS.
- Open Access
- 9 November 2018
- Published by Elsevier in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
- Vol. 936, 416-419
The MPGD-based photon detectors for the upgrade of COMPASS RICH-1 and beyond
- 9 November 2018
- Published by Elsevier in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
- Vol. 936, 416-419
Open AccessThe MPGD-based photon detectors for the upgrade of COMPASS RICH-1 and beyond
- Open Access
RHIP, a Radio-controlled High-Voltage Insulated Picoammeter and its usage in studying ion backflow in MPGD-based photon detectors
A picoammeter system has been developed and engineering. It consists in a current-voltage converter, based on an operational amplifier with very low input current, a high precision ADC, a radio controlled data acquisition unit and the computer-based control, visualization and storage. The precision is of the order of a tenth of picoampers and it can measure currents between electrodes at potentials up to 8 kV. The system is battery powered and a number of strategies have been implemented to limit the power consumption. The system is designed for multichannel applications, up to 256 parallel channels. The overall implementation is cost-effective to make the availability of multichannel setups easily affordable. The design, implementation and performance of the picoammeter system are described in detail as well as a an application: the measurement of ion backflow in MPGD-based photon detectors.
Open AccessRHIP, a Radio-controlled High-Voltage Insulated Picoammeter and its usage in studying ion backflow in MPGD-based photon detectors
A picoammeter system has been developed and engineering. It consists in a current-voltage converter, based on an operational amplifier with very low input current, a high precision ADC, a radio controlled data acquisition unit and the computer-based control, visualization and storage. The precision is of the order of a tenth of picoampers and it can measure currents between electrodes at potentials up to 8 kV. The system is battery powered and a number of strategies have been implemented to limit the power consumption. The system is designed for multichannel applications, up to 256 parallel channels. The overall implementation is cost-effective to make the availability of multichannel setups easily affordable. The design, implementation and performance of the picoammeter system are described in detail as well as a an application: the measurement of ion backflow in MPGD-based photon detectors.
- Open Access
The high voltage system for the novel MPGD-based photon detectors of COMPASS RICH-1
The architecture of the novel MPGD-based photon detectors of COMPASS RICH-1 consists in a large-size hybrid MPGD multilayer layout combining two layers of Thick-GEMs and a bulk resistive MICROMEGAS. Concerning biasing voltage, the Thick-GEMs are segmented in order to reduce the energy released in case of occasional discharges, while the MICROMEGAS anode is segmented in pads individually biased at positive voltage, while the micromesh is grounded. In total, there are ten different electrode types and more than 20000 electrodes supplied by more than 100 HV channels. Commercial power supply units are used. The original elements of the power supply system are the architecture of the voltage distribution net, the compensation, by voltage adjustment, of the effects of pressure and temperature variation affecting the detector gain and a sophisticated control software, which allows to protect the detectors against errors by the operator, to monitor and log voltages and current at 1 Hz rate and to automatically react to detector misbehaviors. The HV system and its performance are described in detail as well as the electrical stability of the detector during the operation at COMPASS.
Open AccessThe high voltage system for the novel MPGD-based photon detectors of COMPASS RICH-1
The architecture of the novel MPGD-based photon detectors of COMPASS RICH-1 consists in a large-size hybrid MPGD multilayer layout combining two layers of Thick-GEMs and a bulk resistive MICROMEGAS. Concerning biasing voltage, the Thick-GEMs are segmented in order to reduce the energy released in case of occasional discharges, while the MICROMEGAS anode is segmented in pads individually biased at positive voltage, while the micromesh is grounded. In total, there are ten different electrode types and more than 20000 electrodes supplied by more than 100 HV channels. Commercial power supply units are used. The original elements of the power supply system are the architecture of the voltage distribution net, the compensation, by voltage adjustment, of the effects of pressure and temperature variation affecting the detector gain and a sophisticated control software, which allows to protect the detectors against errors by the operator, to monitor and log voltages and current at 1 Hz rate and to automatically react to detector misbehaviors. The HV system and its performance are described in detail as well as the electrical stability of the detector during the operation at COMPASS.