Qiuyang Zhao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Qiuyang Zhao has a total of 108 co-authors. Here are the top co-authors by number of shared publications:
Liejin Guo
Xi’an Jiaotong University
24 shared publicationsYechun Wang
Xi’an Jiaotong University
17 shared publications- Hui Jin
State Key Laboratory of Multiphase Flow in Power Engineering
16 shared publications Hui Jin
13 shared publicationsYu Dong
8 shared publications- Liejin Guo
Xi’an Jiaotong University
7 shared publications
Latest Publications
- Open Access
Experimental Study on Oxygen-Reduced Air Foam Flooding in Ultra-Low-Permeability Reservoirs: From Sensitivity Analysis and Decomposition of Oil Recovery to Pore-Scale Seepage Mechanisms
Mature domestic continental low-permeability oil reservoirs in China have generally entered the ultra-high water-cut and high-recovery stage. Complex reservoir heterogeneity, development characteristics prone to gas channeling, and unclear seepage mechanisms of air foam flooding present engineering challenges to efficient development. To address these issues, this study investigates oxygen-reduced air foam flooding in the Chang-6 ultra-low-permeability sandstone reservoir in the WY block of Changqing Oilfield. The microscopic pore network was characterized using high-pressure mercury intrusion, BET (Brunauer-Emmett-Teller) nitrogen adsorption, and scanning electron microscopy. Changes in reservoir and fluid physicochemical characteristics before and after development were evaluated using the sessile drop method, pendant drop method, and Wilhelmy plate method. Core-flooding experiments were performed to confirm preferred key injection parameters, quantitatively decompose individual enhanced oil recovery mechanisms, and verify pore-scale seepage mechanisms via online nuclear magnetic resonance. The results reveal multi-scale pore network characteristics of the target reservoir and confirm the significant reduction in oil–water interfacial tension during foam flooding. Parameter sensitivity analysis identifies preferred operating conditions within the investigated experimental range, including an injection velocity of 0.2–0.3 mL/min, a foaming-agent concentration of 0.4–0.5%, a gas-to-liquid ratio of 2:1, and a 5-cycle slug schedule. Oil recovery decomposition analysis indicates that ultimate oil recovery comprises a relative share of 77.63% from baseline waterflooding, 13.44% from surfactant-assisted oil mobilization, 6.45% from gas assistance, and 2.48% from physical foam plugging. Furthermore, online nuclear magnetic resonance T2 (Transverse relaxation time) spectrum analysis reveals distinct permeability-dependent air foam flow regimes: as permeability decreases, flow behavior transitions from smooth foam propagation with concurrent oil washing and plugging, to the formation of dynamic foam plugging, and finally to severe shear-induced foam destruction in narrow throats that causes air foam flooding to fail. This study provides preferred injection parameters and theoretical grounds for mechanism decomposition in air foam enhanced oil recovery for ultra-low-permeability reservoirs, offering key insights into air foam seepage behavior.
Open AccessExperimental Study on Oxygen-Reduced Air Foam Flooding in Ultra-Low-Permeability Reservoirs: From Sensitivity Analysis and Decomposition of Oil Recovery to Pore-Scale Seepage Mechanisms
Mature domestic continental low-permeability oil reservoirs in China have generally entered the ultra-high water-cut and high-recovery stage. Complex reservoir heterogeneity, development characteristics prone to gas channeling, and unclear seepage mechanisms of air foam flooding present engineering challenges to efficient development. To address these issues, this study investigates oxygen-reduced air foam flooding in the Chang-6 ultra-low-permeability sandstone reservoir in the WY block of Changqing Oilfield. The microscopic pore network was characterized using high-pressure mercury intrusion, BET (Brunauer-Emmett-Teller) nitrogen adsorption, and scanning electron microscopy. Changes in reservoir and fluid physicochemical characteristics before and after development were evaluated using the sessile drop method, pendant drop method, and Wilhelmy plate method. Core-flooding experiments were performed to confirm preferred key injection parameters, quantitatively decompose individual enhanced oil recovery mechanisms, and verify pore-scale seepage mechanisms via online nuclear magnetic resonance. The results reveal multi-scale pore network characteristics of the target reservoir and confirm the significant reduction in oil–water interfacial tension during foam flooding. Parameter sensitivity analysis identifies preferred operating conditions within the investigated experimental range, including an injection velocity of 0.2–0.3 mL/min, a foaming-agent concentration of 0.4–0.5%, a gas-to-liquid ratio of 2:1, and a 5-cycle slug schedule. Oil recovery decomposition analysis indicates that ultimate oil recovery comprises a relative share of 77.63% from baseline waterflooding, 13.44% from surfactant-assisted oil mobilization, 6.45% from gas assistance, and 2.48% from physical foam plugging. Furthermore, online nuclear magnetic resonance T2 (Transverse relaxation time) spectrum analysis reveals distinct permeability-dependent air foam flow regimes: as permeability decreases, flow behavior transitions from smooth foam propagation with concurrent oil washing and plugging, to the formation of dynamic foam plugging, and finally to severe shear-induced foam destruction in narrow throats that causes air foam flooding to fail. This study provides preferred injection parameters and theoretical grounds for mechanism decomposition in air foam enhanced oil recovery for ultra-low-permeability reservoirs, offering key insights into air foam seepage behavior.
- Open Access
Numerical Simulation and Parameter Optimization of Air-Foam Flooding in Ultra-Low-Permeability Reservoirs
Air-foam flooding combines gas-assisted displacement, foam mobility control, and surfactant-induced interfacial tension reduction in ultra-low-permeability reservoirs. A three-dimensional mechanistic model informed by a field-scale reservoir model was used to compare six displacement cases, reservoir-property responses, and injection schedules. The final recovery factors for baseline waterflooding, gas-assisted flooding, surfactant-background flooding, foam mobility control, interfacial tension reduction, and integrated air-foam flooding were 38.14%, 40.50%, 40.81%, 42.03%, 41.44%, and 47.79%, respectively. Relative to the surfactant-background case, activating foam mobility control alone increased recovery by 1.22%, whereas activating interfacial tension reduction alone increased it by 0.63%. Activating both increased recovery by 6.98%, including a 5.13% non-additive term that suggests a potential interaction between foam plugging and surfactant-enhanced oil displacement under the modeled conditions. Within the tested ranges, the normalized sensitivity weights for permeability contrast, the vertical-to-horizontal permeability ratio, and average permeability were 41.13%, 34.79%, and 24.08%, respectively. Within the parameter ranges investigated in this model, the single-factor results indicated favorable recovery performance at permeability contrasts not exceeding 10, vertical-to-horizontal permeability ratios of at least 0.4, and average permeabilities of at least 4 mD. A gas-to-liquid ratio of 1:1 produced the highest final recovery among the ratios tested. With the same prescribed total injection volume, shortening the alternating injection interval from 24 to 3 months increased final recovery from 47.60% to 48.40%. Switching at water cuts no higher than 85% avoided the lower recovery associated with the latest switching case. These findings provide a quantitative basis for reservoir screening and injection scheme design of air-foam flooding.
Open AccessNumerical Simulation and Parameter Optimization of Air-Foam Flooding in Ultra-Low-Permeability Reservoirs
Air-foam flooding combines gas-assisted displacement, foam mobility control, and surfactant-induced interfacial tension reduction in ultra-low-permeability reservoirs. A three-dimensional mechanistic model informed by a field-scale reservoir model was used to compare six displacement cases, reservoir-property responses, and injection schedules. The final recovery factors for baseline waterflooding, gas-assisted flooding, surfactant-background flooding, foam mobility control, interfacial tension reduction, and integrated air-foam flooding were 38.14%, 40.50%, 40.81%, 42.03%, 41.44%, and 47.79%, respectively. Relative to the surfactant-background case, activating foam mobility control alone increased recovery by 1.22%, whereas activating interfacial tension reduction alone increased it by 0.63%. Activating both increased recovery by 6.98%, including a 5.13% non-additive term that suggests a potential interaction between foam plugging and surfactant-enhanced oil displacement under the modeled conditions. Within the tested ranges, the normalized sensitivity weights for permeability contrast, the vertical-to-horizontal permeability ratio, and average permeability were 41.13%, 34.79%, and 24.08%, respectively. Within the parameter ranges investigated in this model, the single-factor results indicated favorable recovery performance at permeability contrasts not exceeding 10, vertical-to-horizontal permeability ratios of at least 0.4, and average permeabilities of at least 4 mD. A gas-to-liquid ratio of 1:1 produced the highest final recovery among the ratios tested. With the same prescribed total injection volume, shortening the alternating injection interval from 24 to 3 months increased final recovery from 47.60% to 48.40%. Switching at water cuts no higher than 85% avoided the lower recovery associated with the latest switching case. These findings provide a quantitative basis for reservoir screening and injection scheme design of air-foam flooding.
- Open Access
- 20 October 2026
- Published by Elsevier in SSRN Electronic Journal
An integrated desorption–supercritical water gasification–oxidation system for oily sludge: Thermodynamic and environmental analyses
Supercritical water gasification (SCWG) avoids drying wet oily sludge, but high heat demand and poor recovery of product energy constrain system performance. This study compared a baseline SCWG-supercritical water oxidation (SCWO) process with an upgraded configuration integrating in situ H2 separation, multistage heat recovery, and supercritical carbon dioxide (sCO2) and organic Rankine cycle (ORC) power systems. Energy, exergy, and life-cycle global warming potential (GWP) were evaluated across feed concentration, in situ H2 separation ratio (ISHS), and oxygen equivalence ratio (ER). Thermally feasible operation required non-positive heat duties in the desorption, SCWG, SCWO, and catalyst-recovery reactors. Relative to the baseline, the upgraded configuration reduced desorption energy demand by 68.8% and exergy destruction by 68.5%. The preferred condition combined a 50 wt% feed concentration, an ISHS of 0.5, and an ER of 0.8. An ER of 0.7 achieved higher thermodynamic efficiencies and lower GWP but required 288.61 kW of external SCWO heat. At the preferred point, the two power cycles generated 778.49 kW of combined net power, and GWP was 1.425 kg CO2-eq kg-1 raw wet sludge. ER = 0.8 also minimised oxidant input within the self-heating window. Constraining hydrogen allocation and heat recovery by reactor-level self-heating preserved hydrogen and generated power without external reactor heat.
- 20 October 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessAn integrated desorption–supercritical water gasification–oxidation system for oily sludge: Thermodynamic and environmental analyses
Supercritical water gasification (SCWG) avoids drying wet oily sludge, but high heat demand and poor recovery of product energy constrain system performance. This study compared a baseline SCWG-supercritical water oxidation (SCWO) process with an upgraded configuration integrating in situ H2 separation, multistage heat recovery, and supercritical carbon dioxide (sCO2) and organic Rankine cycle (ORC) power systems. Energy, exergy, and life-cycle global warming potential (GWP) were evaluated across feed concentration, in situ H2 separation ratio (ISHS), and oxygen equivalence ratio (ER). Thermally feasible operation required non-positive heat duties in the desorption, SCWG, SCWO, and catalyst-recovery reactors. Relative to the baseline, the upgraded configuration reduced desorption energy demand by 68.8% and exergy destruction by 68.5%. The preferred condition combined a 50 wt% feed concentration, an ISHS of 0.5, and an ER of 0.8. An ER of 0.7 achieved higher thermodynamic efficiencies and lower GWP but required 288.61 kW of external SCWO heat. At the preferred point, the two power cycles generated 778.49 kW of combined net power, and GWP was 1.425 kg CO2-eq kg-1 raw wet sludge. ER = 0.8 also minimised oxidant input within the self-heating window. Constraining hydrogen allocation and heat recovery by reactor-level self-heating preserved hydrogen and generated power without external reactor heat.
- 2 October 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (40) , 30169-30182
Multibubble Detachment Characteristics of Regularly Distributed Nucleation Sites during Water Splitting
Bubble detachment from electrode surfaces is crucial for enhancing the overall efficiency of water electrolysis. Arrayed microelectrodes have attracted considerable attention because of their superior gas evolution performance. However, without a clear understanding of bubble detachment behavior, existing electrode architecture optimizations are forced to proceed via empirical approaches. In this work, the detachment characteristics of multiple bubbles nucleated at regularly distributed on a photoelectrochemical water splitting electrode surface were systematically investigated by varying the nucleation site spacing and anodic current. By combining high speed imaging, electrochemical measurements, and particle image velocimetry, the critical role of bubble–bubble interactions during the detachment process was revealed. The results demonstrate that, in addition to buoyancy, both coalescence and hydrodynamic interactions generated by adjacent or the previous bubble can promote bubble detachment. As the dimensionless ratio of single bubble detachment radius to site spacing increases, bubble evolution progressively shifts from relatively independent behavior to stronger hydrodynamic interactions and ultimately to coalescence-dominated detachment. These interactions markedly alter the bubble detachment radius and the associated transport behavior. These findings elucidate the fundamental relationship between nucleation site spacing and gas evolution performance, providing guiding principles for the rational design and optimization of array microstructured electrodes.
- 2 October 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (40) , 30169-30182
Multibubble Detachment Characteristics of Regularly Distributed Nucleation Sites during Water Splitting
Bubble detachment from electrode surfaces is crucial for enhancing the overall efficiency of water electrolysis. Arrayed microelectrodes have attracted considerable attention because of their superior gas evolution performance. However, without a clear understanding of bubble detachment behavior, existing electrode architecture optimizations are forced to proceed via empirical approaches. In this work, the detachment characteristics of multiple bubbles nucleated at regularly distributed on a photoelectrochemical water splitting electrode surface were systematically investigated by varying the nucleation site spacing and anodic current. By combining high speed imaging, electrochemical measurements, and particle image velocimetry, the critical role of bubble–bubble interactions during the detachment process was revealed. The results demonstrate that, in addition to buoyancy, both coalescence and hydrodynamic interactions generated by adjacent or the previous bubble can promote bubble detachment. As the dimensionless ratio of single bubble detachment radius to site spacing increases, bubble evolution progressively shifts from relatively independent behavior to stronger hydrodynamic interactions and ultimately to coalescence-dominated detachment. These interactions markedly alter the bubble detachment radius and the associated transport behavior. These findings elucidate the fundamental relationship between nucleation site spacing and gas evolution performance, providing guiding principles for the rational design and optimization of array microstructured electrodes.
- Open Access
- 22 September 2026
- Published by Elsevier in SSRN Electronic Journal
Molecular Dynamics Insights into Supercritical Water Flooding for Shale Oil in Nano-slits
Supercritical water (SCW) is an effective medium for in-situ shale oil recovery. However, research related to the displacement characteristics of shale oil during SCW flooding (SCWF) has not been conducted in great depth. In the current study, molecular dynamics simulations were performed to investigate the displacement of two- and multi-component hydrocarbons (aromatics, chain alkanes, cycloalkanes, and heavy hydrocarbons) by SCW within various shale nano-slits (calcite, montmorillonite, quartz, organic), thereby systematically demonstrating the key displacement behaviors and revealing the underlying mechanisms governing the displacement performance. The results showed that efficient SCWF exhibited a three-stage pattern: Stage I was a pressure-driven initiation stage, during which the hydrocarbon concentration declined linearly with time; Stage II and Stage III were a partially miscible displacement stage and a diffusion-driven displacement stage, respectively, and the hydrocarbon concentration in these two stages followed an identical exponential decay function. Less effective SCWF involved either Stage I and a fingering-dominated Stage II, or immiscible displacement throughout the process. Each class of hydrocarbon exhibits some common displacement characteristics even in different nano-slits. Under the same operating conditions, in the calcite and organic nano-slits, fingering was dominant compared to miscibility, yielding narrow strip-like and water-in-oil flow patterns with displacement efficiencies of 83.2 and 82.3%, respectively; in the quartz and pretreated montmorillonite nano-slits, miscibility was dominant compared to fingering, yielding cone-like and band-like flow patterns with efficiencies of 92 and 96.9%, respectively. Oil-water miscibility was suppressed in these confined spaces, yet even limited dissolution markedly improved the displacement efficiency. Finally, novel kinetic models for the microscopic displacement of hydrocarbons by SCW were established.
- 22 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessMolecular Dynamics Insights into Supercritical Water Flooding for Shale Oil in Nano-slits
Supercritical water (SCW) is an effective medium for in-situ shale oil recovery. However, research related to the displacement characteristics of shale oil during SCW flooding (SCWF) has not been conducted in great depth. In the current study, molecular dynamics simulations were performed to investigate the displacement of two- and multi-component hydrocarbons (aromatics, chain alkanes, cycloalkanes, and heavy hydrocarbons) by SCW within various shale nano-slits (calcite, montmorillonite, quartz, organic), thereby systematically demonstrating the key displacement behaviors and revealing the underlying mechanisms governing the displacement performance. The results showed that efficient SCWF exhibited a three-stage pattern: Stage I was a pressure-driven initiation stage, during which the hydrocarbon concentration declined linearly with time; Stage II and Stage III were a partially miscible displacement stage and a diffusion-driven displacement stage, respectively, and the hydrocarbon concentration in these two stages followed an identical exponential decay function. Less effective SCWF involved either Stage I and a fingering-dominated Stage II, or immiscible displacement throughout the process. Each class of hydrocarbon exhibits some common displacement characteristics even in different nano-slits. Under the same operating conditions, in the calcite and organic nano-slits, fingering was dominant compared to miscibility, yielding narrow strip-like and water-in-oil flow patterns with displacement efficiencies of 83.2 and 82.3%, respectively; in the quartz and pretreated montmorillonite nano-slits, miscibility was dominant compared to fingering, yielding cone-like and band-like flow patterns with efficiencies of 92 and 96.9%, respectively. Oil-water miscibility was suppressed in these confined spaces, yet even limited dissolution markedly improved the displacement efficiency. Finally, novel kinetic models for the microscopic displacement of hydrocarbons by SCW were established.
- 10 September 2026
- Published by Taylor & Francis in International Journal of Green Energy
- Vol. 23 (13) , 3220-3227
Sustainable hydrogen production from oily wastewater by supercritical water gasification
Petroleum is a predominant component of the modern global energy mix, accounting for approximately one-third of total world energy consumption (Energy Institute 2025; Hein 2017), as illustrated in ...
- 10 September 2026
- Published by Taylor & Francis in International Journal of Green Energy
- Vol. 23 (13) , 3220-3227
Sustainable hydrogen production from oily wastewater by supercritical water gasification
Petroleum is a predominant component of the modern global energy mix, accounting for approximately one-third of total world energy consumption (Energy Institute 2025; Hein 2017), as illustrated in ...
- Open Access
- 3 August 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 17 (32) , 9128-9135
Crossing the Widom Line: Evolution of Cohesive Strength and Cavity Formation in Supercritical Water
Supercritical water (SCW) is a promising green solvent, yet optimizing its performance requires a fundamental understanding of the thermodynamic behavior and solvation mechanisms. Here, molecular dynamics simulations are used to investigate the thermodynamic responses, cohesive-strength evolution, and cavity-formation behavior of SCW along isobars, with the NIST benchmark data serving as a reference for the classical Widom line (WL) behavior. The origin of the high-pressure WL divergence is analyzed from the perspective of statistical fluctuations and intermolecular interactions. Furthermore, cohesive energy density and the state-dependent mean-radius cavity-formation free energy, together with their corresponding thermal response coefficients, are introduced to establish a thermodynamic connection with the classical WL. Building on this connection, the high-pressure “Widom region” is delineated, and the thermodynamically driven evolution sequence along the isobaric heating path is revealed. This work provides a thermodynamic framework for understanding the evolution of the Widom region and its relevance to the solvation behavior of SCW.
- 3 August 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 17 (32) , 9128-9135
Open AccessCrossing the Widom Line: Evolution of Cohesive Strength and Cavity Formation in Supercritical Water
Supercritical water (SCW) is a promising green solvent, yet optimizing its performance requires a fundamental understanding of the thermodynamic behavior and solvation mechanisms. Here, molecular dynamics simulations are used to investigate the thermodynamic responses, cohesive-strength evolution, and cavity-formation behavior of SCW along isobars, with the NIST benchmark data serving as a reference for the classical Widom line (WL) behavior. The origin of the high-pressure WL divergence is analyzed from the perspective of statistical fluctuations and intermolecular interactions. Furthermore, cohesive energy density and the state-dependent mean-radius cavity-formation free energy, together with their corresponding thermal response coefficients, are introduced to establish a thermodynamic connection with the classical WL. Building on this connection, the high-pressure “Widom region” is delineated, and the thermodynamically driven evolution sequence along the isobaric heating path is revealed. This work provides a thermodynamic framework for understanding the evolution of the Widom region and its relevance to the solvation behavior of SCW.