Sabbir Ahmed Khan
Research Subjects
Sabbir Ahmed Khan has a total of 93 co-authors. Here are the top co-authors by number of shared publications:
- Esko I. Kauppinen
Department of Applied Physics School of Science Aalto University Espoo Finland
4 shared publications - Peter Krogstrup
University of Copenhagen
4 shared publications - Yu Liu
Hefei University of Technology
4 shared publications - Yongping Liao
Dalian Polytechnic University
3 shared publications Charles M. Marcus
Center for Quantum Devices, Niels Bohr Institute , University of Copenhagen , 2100 Copenhagen , Denmark
2 shared publicationsChristian Koch
Catalan Institute of Nanoscience and Nanotechnology (ICN2), CSIC and BIST, Campus UAB, Bellaterra, 08193 Barcelona, Catalonia, Spain
2 shared publications
Latest Publications
- Open Access
- 19 May 2025
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 43 (4)
Surface effects in quasiatomic layer etching of silicon
The current investigation explores the surface effects of quasiatomic layer etching (Q-ALE) of silicon (Si), focusing on the interplay of process parameters, such as Ar+ ion energy, and their impact on etch rate, surface roughness, and material damage. Using a chlorine-based reactive ion etching tool at varying radio frequency bias voltages, the ion energy distribution and etching characteristics were systematically analyzed. Experimental results demonstrate the existence of an ALE process window at 50–70 eV Ar+ peak ion energy, achieving an etch-per-cycle of ∼0.12 nm with minimum surface roughness and damage. Outside this window, higher ion energies led to increased surface roughness of the etched Si. Ellipsometry and atomic force microscopy revealed that the amorphous Si layer resulting from Ar+ ion bombardment was limited to ∼0.6 nm under optimal conditions. These findings provide insights into optimizing Q-ALE processes for precise and controlled Si etching, enabling advancements in nanoscale device fabrication.
- 19 May 2025
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 43 (4)
Open AccessSurface effects in quasiatomic layer etching of silicon
The current investigation explores the surface effects of quasiatomic layer etching (Q-ALE) of silicon (Si), focusing on the interplay of process parameters, such as Ar+ ion energy, and their impact on etch rate, surface roughness, and material damage. Using a chlorine-based reactive ion etching tool at varying radio frequency bias voltages, the ion energy distribution and etching characteristics were systematically analyzed. Experimental results demonstrate the existence of an ALE process window at 50–70 eV Ar+ peak ion energy, achieving an etch-per-cycle of ∼0.12 nm with minimum surface roughness and damage. Outside this window, higher ion energies led to increased surface roughness of the etched Si. Ellipsometry and atomic force microscopy revealed that the amorphous Si layer resulting from Ar+ ion bombardment was limited to ∼0.6 nm under optimal conditions. These findings provide insights into optimizing Q-ALE processes for precise and controlled Si etching, enabling advancements in nanoscale device fabrication.
- Open Access
- 21 August 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (8)
Gate-tunable superconductivity in hybrid InSb–Pb nanowires
We present a report on hybrid InSb–Pb nanowires that combine high spin–orbit coupling with a high critical field and a large superconducting gap. Material characterization indicates the Pb layer of high crystal quality on the nanowire side facets. Hard induced superconducting gaps and gate-tunable supercurrent are observed in the hybrid nanowires. These results showcase the promising potential of this material combination for a diverse range of applications in hybrid quantum transport devices.
- 21 August 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (8)
Open AccessGate-tunable superconductivity in hybrid InSb–Pb nanowires
We present a report on hybrid InSb–Pb nanowires that combine high spin–orbit coupling with a high critical field and a large superconducting gap. Material characterization indicates the Pb layer of high crystal quality on the nanowire side facets. Hard induced superconducting gaps and gate-tunable supercurrent are observed in the hybrid nanowires. These results showcase the promising potential of this material combination for a diverse range of applications in hybrid quantum transport devices.
- 12 May 2020
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 14 (11) , 14605-14615
Highly Transparent Gatable Superconducting Shadow Junctions
Gate tunable junctions are key elements in quantum devices based on hybrid semiconductor-superconductor materials. They serve multiple purposes ranging from tunnel spectroscopy probes to voltage-controlled qubit operations in gatemon and topological qubits. Common to all is that junction transparency plays a critical role. In this study, we grow single crystalline InAs, InSb, and InAs1−xSbx nanowires with epitaxial superconductors and in-situ shadowed junctions in a single-step molecular beam epitaxy process. We investigate correlations between fabrication parameters, junction morphologies, and electronic transport properties of the junctions and show that the examined in-situ shadowed junctions are of significantly higher quality than the etched junctions. By varying the edge sharpness of the shadow junctions we show that the sharpest edges yield the highest junction transparency for all three examined semiconductors. Further, critical supercurrent measurements reveal an extraordinarily high ICRN, close to the KO−2 limit. This study demonstrates a promising engineering path towards reliable gate-tunable superconducting qubits.
- 12 May 2020
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 14 (11) , 14605-14615
Highly Transparent Gatable Superconducting Shadow Junctions
Gate tunable junctions are key elements in quantum devices based on hybrid semiconductor-superconductor materials. They serve multiple purposes ranging from tunnel spectroscopy probes to voltage-controlled qubit operations in gatemon and topological qubits. Common to all is that junction transparency plays a critical role. In this study, we grow single crystalline InAs, InSb, and InAs1−xSbx nanowires with epitaxial superconductors and in-situ shadowed junctions in a single-step molecular beam epitaxy process. We investigate correlations between fabrication parameters, junction morphologies, and electronic transport properties of the junctions and show that the examined in-situ shadowed junctions are of significantly higher quality than the etched junctions. By varying the edge sharpness of the shadow junctions we show that the sharpest edges yield the highest junction transparency for all three examined semiconductors. Further, critical supercurrent measurements reveal an extraordinarily high ICRN, close to the KO−2 limit. This study demonstrates a promising engineering path towards reliable gate-tunable superconducting qubits.
- 26 December 2019
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 12 (7) , 8780-8787
Coherent Epitaxial Semiconductor–Ferromagnetic Insulator InAs/EuS Interfaces: Band Alignment and Magnetic Structure
Hybrid semiconductor - ferromagnetic insulator heterostructures are interesting due to their tunable electronic transport, self-sustained stray field and local proximitized magnetic exchange. In this work, we present lattice matched hybrid epitaxy of semiconductor - ferromagnetic insulator InAs/EuS heterostructures and analyze the atomic-scale structure as well as their electronic and magnetic characteristics. The Fermi level at the InAs/EuS interface is found to be close to the InAs conduction band and in the bandgap of EuS, thus preserving the semiconducting properties. Both neutron and X-ray reflectivity measurements show that the ferromagnetic component is mainly localized in the EuS thin film with a suppression of the Eu moment in the EuS layer nearest the InAs. Induced moments in the adjacent InAs layers were not detected although our ab initio calculations indicate a small exchange field in the InAs layer. This work presents a step towards realizing high quality semiconductor - ferromagnetic insulator hybrids, which is a critical requirement for development of various quantum and spintronic applications without external magnetic fields.
- 26 December 2019
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 12 (7) , 8780-8787
Coherent Epitaxial Semiconductor–Ferromagnetic Insulator InAs/EuS Interfaces: Band Alignment and Magnetic Structure
Hybrid semiconductor - ferromagnetic insulator heterostructures are interesting due to their tunable electronic transport, self-sustained stray field and local proximitized magnetic exchange. In this work, we present lattice matched hybrid epitaxy of semiconductor - ferromagnetic insulator InAs/EuS heterostructures and analyze the atomic-scale structure as well as their electronic and magnetic characteristics. The Fermi level at the InAs/EuS interface is found to be close to the InAs conduction band and in the bandgap of EuS, thus preserving the semiconducting properties. Both neutron and X-ray reflectivity measurements show that the ferromagnetic component is mainly localized in the EuS thin film with a suppression of the Eu moment in the EuS layer nearest the InAs. Induced moments in the adjacent InAs layers were not detected although our ab initio calculations indicate a small exchange field in the InAs layer. This work presents a step towards realizing high quality semiconductor - ferromagnetic insulator hybrids, which is a critical requirement for development of various quantum and spintronic applications without external magnetic fields.
- 26 November 2019
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 20 (1) , 456-462
Semiconductor–Ferromagnetic Insulator–Superconductor Nanowires: Stray Field and Exchange Field
Nanowires can serve as flexible substrates for hybrid epitaxial growth on selected facets, allowing for the design of heterostructures with complex material combinations and geometries. In this work we report on hybrid epitaxy of freestanding vapor–liquid–solid grown and in-plane selective area grown semiconductor–ferromagnetic insulator–superconductor (InAs/EuS/Al) nanowire heterostructures. We study the crystal growth and complex epitaxial matching of wurtzite and zinc-blende InAs/rock-salt EuS interfaces as well as rock-salt EuS/face-centered cubic Al interfaces. Because of the magnetic anisotropy originating from the nanowire shape, the magnetic structure of the EuS phase is easily tuned into single magnetic domains. This effect efficiently ejects the stray field lines along the nanowires. With tunnel spectroscopy measurements of the density of states, we show that the material has a hard induced superconducting gap, and magnetic hysteretic evolution which indicates that the magnetic exchange fields are not negligible. These hybrid nanowires fulfill key material requirements for serving as a platform for spin-based quantum applications, such as scalable topological quantum computing.
- 26 November 2019
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 20 (1) , 456-462
Semiconductor–Ferromagnetic Insulator–Superconductor Nanowires: Stray Field and Exchange Field
Nanowires can serve as flexible substrates for hybrid epitaxial growth on selected facets, allowing for the design of heterostructures with complex material combinations and geometries. In this work we report on hybrid epitaxy of freestanding vapor–liquid–solid grown and in-plane selective area grown semiconductor–ferromagnetic insulator–superconductor (InAs/EuS/Al) nanowire heterostructures. We study the crystal growth and complex epitaxial matching of wurtzite and zinc-blende InAs/rock-salt EuS interfaces as well as rock-salt EuS/face-centered cubic Al interfaces. Because of the magnetic anisotropy originating from the nanowire shape, the magnetic structure of the EuS phase is easily tuned into single magnetic domains. This effect efficiently ejects the stray field lines along the nanowires. With tunnel spectroscopy measurements of the density of states, we show that the material has a hard induced superconducting gap, and magnetic hysteretic evolution which indicates that the magnetic exchange fields are not negligible. These hybrid nanowires fulfill key material requirements for serving as a platform for spin-based quantum applications, such as scalable topological quantum computing.
- 9 September 2019
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 13 (10) , 11522-11529
Enhanced Tunneling in a Hybrid of Single-Walled Carbon Nanotubes and Graphene
Transparent and conductive films (TCFs) are of great technological importance. The high transmittance, electrical conductivity and mechanical strength make single-walled carbon nanotubes (SWCNTs) a good candidate for their raw material. Despite the ballistic transport in individual SWCNTs, however, the electrical conductivity of their networks is limited by low efficiency of charge tunneling between the tube elements. Here, we demonstrate that the nanotube network sheet resistance at high optical transmittance is decreased by more than 50% when fabricated on graphene and thus provides a comparable improvement as widely adopted gold chloride (AuCl3) doping. However, while Raman spectroscopy reveals substantial changes in spectral features of doped nanotubes, no similar effect is observed in presence of graphene. Instead, temperature dependent transport measurements indicate that graphene substrate reduces the tunneling barrier heights while its parallel conductivity contribution is almost negligible. Finally, we show that combining the graphene substrate and AuCl3 doping, the SWCNT thin films can exhibit sheet resistance as low as 36 Ω/sq. at 90% transmittance
- 9 September 2019
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 13 (10) , 11522-11529
Enhanced Tunneling in a Hybrid of Single-Walled Carbon Nanotubes and Graphene
Transparent and conductive films (TCFs) are of great technological importance. The high transmittance, electrical conductivity and mechanical strength make single-walled carbon nanotubes (SWCNTs) a good candidate for their raw material. Despite the ballistic transport in individual SWCNTs, however, the electrical conductivity of their networks is limited by low efficiency of charge tunneling between the tube elements. Here, we demonstrate that the nanotube network sheet resistance at high optical transmittance is decreased by more than 50% when fabricated on graphene and thus provides a comparable improvement as widely adopted gold chloride (AuCl3) doping. However, while Raman spectroscopy reveals substantial changes in spectral features of doped nanotubes, no similar effect is observed in presence of graphene. Instead, temperature dependent transport measurements indicate that graphene substrate reduces the tunneling barrier heights while its parallel conductivity contribution is almost negligible. Finally, we show that combining the graphene substrate and AuCl3 doping, the SWCNT thin films can exhibit sheet resistance as low as 36 Ω/sq. at 90% transmittance
- 4 October 2018
- Published by Wiley in Advanced Materials Interfaces
- Vol. 5 (23)
Tuning Geometry of SWCNTs by CO2 in Floating Catalyst CVD for High‐Performance Transparent Conductive Films
Optimized geometry of single‐walled carbon nanotubes (SWCNTs) is vital to high‐performance transparent conductive films (TCFs). Herein, the geometry of SWCNTs, i.e., tube diameter, bundle length, and bundle diameter, are successfully tuned by introducing carbon dioxide (CO2) into floating catalyst chemical vapor deposition (FC‐CVD), where carbon monoxide (CO) is used as a carbon source and ferrocene as a catalyst precursor. Both tube diameter and bundle length increase with an increment of CO2 concentration, and the yield of SWCNTs can be significantly promoted with the appropriate amount of CO2. The role of CO2 in this behavior is further rationalized as enhancing CO decomposition or carbon dissolution into catalysts. The TCFs based on SWCNTs with optimized geometry by CO2 exhibit improved performance up to 86.8 Ω sq−1 at 90% transmittance after AuCl3 doping, achieving about 50% reduction of sheet resistance compared to the TCFs without CO2. The use of CO2 for directly tuning growth of SWCNTs blazes a new trail in the field of SWCNT based TCFs.
- 4 October 2018
- Published by Wiley in Advanced Materials Interfaces
- Vol. 5 (23)
Tuning Geometry of SWCNTs by CO2 in Floating Catalyst CVD for High‐Performance Transparent Conductive Films
Optimized geometry of single‐walled carbon nanotubes (SWCNTs) is vital to high‐performance transparent conductive films (TCFs). Herein, the geometry of SWCNTs, i.e., tube diameter, bundle length, and bundle diameter, are successfully tuned by introducing carbon dioxide (CO2) into floating catalyst chemical vapor deposition (FC‐CVD), where carbon monoxide (CO) is used as a carbon source and ferrocene as a catalyst precursor. Both tube diameter and bundle length increase with an increment of CO2 concentration, and the yield of SWCNTs can be significantly promoted with the appropriate amount of CO2. The role of CO2 in this behavior is further rationalized as enhancing CO decomposition or carbon dissolution into catalysts. The TCFs based on SWCNTs with optimized geometry by CO2 exhibit improved performance up to 86.8 Ω sq−1 at 90% transmittance after AuCl3 doping, achieving about 50% reduction of sheet resistance compared to the TCFs without CO2. The use of CO2 for directly tuning growth of SWCNTs blazes a new trail in the field of SWCNT based TCFs.
- Open Access
- 7 September 2018
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 2 (9) , 093401
Field effect enhancement in buffered quantum nanowire networks
III–V semiconductor nanowires have shown great potential in various quantum transport experiments. However, realizing a scalable high-quality nanowire-based platform that could lead to quantum information applications has been challenging. Here, we study the potential of selective area growth by molecular beam epitaxy of InAs nanowire networks grown on GaAs-based buffer layers, where Sb is used as a surfactant. The buffered geometry allows for substantial elastic strain relaxation and a strong enhancement of field effect mobility. We show that the networks possess strong spin-orbit interaction and long phase-coherence lengths with a temperature dependence indicating ballistic transport. With these findings, and the compatibility of the growth method with hybrid epitaxy, we conclude that the material platform fulfills the requirements for a wide range of quantum experiments and applications.
- 7 September 2018
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 2 (9) , 093401
Open AccessField effect enhancement in buffered quantum nanowire networks
III–V semiconductor nanowires have shown great potential in various quantum transport experiments. However, realizing a scalable high-quality nanowire-based platform that could lead to quantum information applications has been challenging. Here, we study the potential of selective area growth by molecular beam epitaxy of InAs nanowire networks grown on GaAs-based buffer layers, where Sb is used as a surfactant. The buffered geometry allows for substantial elastic strain relaxation and a strong enhancement of field effect mobility. We show that the networks possess strong spin-orbit interaction and long phase-coherence lengths with a temperature dependence indicating ballistic transport. With these findings, and the compatibility of the growth method with hybrid epitaxy, we conclude that the material platform fulfills the requirements for a wide range of quantum experiments and applications.
- Open Access
- 26 July 2018
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 140 (31) , 9797-9800
Direct Synthesis of Colorful Single-Walled Carbon Nanotube Thin Films
In floating catalyst chemical vapor deposition (FC-CVD), tuning chirality distribution and obtaining narrow chirality distribution of single-walled carbon nanotubes (SWCNTs) is challenging. Herein, by introducing various amount of CO2 in FC-CVD using CO as a carbon source, we have succeeded in directly synthesizing SWCNT films with tunable chirality distribution as well as tunable colors. In particular, with 0.25 and 0.37 volume percent of CO2, the SWCNT films display green and brown colors, respectively. We ascribed various colors to suitable diameter and narrow chirality distribution of SWCNTs. Additionally, by optimizing reactor temperature, we achieved much narrower (n,m) distribution clustered around (11,9) with extremely narrow diameter range (>98% between 1.2 and 1.5 nm). We propose that CO2 may affect CO disproportionation and nucleation modes of SWCNTs, resulting in SWCNTs’ various diameter ranges. Our work could provide a new route for high-yield and direct synthesis of SWCNTs with narrow chirality distribution and offer potential applications in electronics, such as touch sensors or transistors.
- 26 July 2018
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 140 (31) , 9797-9800
Open AccessDirect Synthesis of Colorful Single-Walled Carbon Nanotube Thin Films
In floating catalyst chemical vapor deposition (FC-CVD), tuning chirality distribution and obtaining narrow chirality distribution of single-walled carbon nanotubes (SWCNTs) is challenging. Herein, by introducing various amount of CO2 in FC-CVD using CO as a carbon source, we have succeeded in directly synthesizing SWCNT films with tunable chirality distribution as well as tunable colors. In particular, with 0.25 and 0.37 volume percent of CO2, the SWCNT films display green and brown colors, respectively. We ascribed various colors to suitable diameter and narrow chirality distribution of SWCNTs. Additionally, by optimizing reactor temperature, we achieved much narrower (n,m) distribution clustered around (11,9) with extremely narrow diameter range (>98% between 1.2 and 1.5 nm). We propose that CO2 may affect CO disproportionation and nucleation modes of SWCNTs, resulting in SWCNTs’ various diameter ranges. Our work could provide a new route for high-yield and direct synthesis of SWCNTs with narrow chirality distribution and offer potential applications in electronics, such as touch sensors or transistors.
- 22 May 2018
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 1 (6) , 2476-2482
High-Definition Nanoimprint Stamp Fabrication by Atomic Layer Etching
- 22 May 2018
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 1 (6) , 2476-2482
High-Definition Nanoimprint Stamp Fabrication by Atomic Layer Etching