Yong Wan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Yong Wan has a total of 62 co-authors. Here are the top co-authors by number of shared publications:
- Hongbo Pan
Anhui Province Key Laboratory of Metallurgical Engineering & Resources Recycling, Anhui University of Technology, Maanshan 243002, China
3 shared publications - Jie Li
School of Metallurgical Engineering, Anhui University of Technology, Ma’anshan, People’s Republic of China
3 shared publications - Liangjun Chen
Anhui University of Technology
3 shared publications Shao-Jie Wu
Technology Center of Xinyu Iron & Steel Co., Ltd., Xinyu, Jiangxi 338001, P.R. China
3 shared publications- Yonghong Wen
Key Laboratory of Metallurgical Emission Reduction & Resources Recycling (Anhui University of Technology), Ministry of Education, Ma’anshan, China
3 shared publications - Bin Fu
School of Materials Science and Engineering, Shanghai Institute of Technology, Shanghai, China
2 shared publications
Latest Publications
- Open Access
- 15 August 2025
- Published by Springer Nature in International Journal of Minerals, Metallurgy and Materials
- Vol. 32 (8) , 1902-1912
Effect of Si content and tempering temperature on microstructure and precipitation behavior of graphite particles in Fe–0.58C–1.0Al steel
- 15 August 2025
- Published by Springer Nature in International Journal of Minerals, Metallurgy and Materials
- Vol. 32 (8) , 1902-1912
Open AccessEffect of Si content and tempering temperature on microstructure and precipitation behavior of graphite particles in Fe–0.58C–1.0Al steel
- 5 November 2024
- Published by Wiley in Steel Research International
- Vol. 96 (3)
Early Stages of High‐Temperature Oxidation Behavior and Its Phase Evolution of 9% Ni Steel
Herein, the effects of oxygen partial pressure (5–20%) and oxidation time (0.5–6 h) on the growth behavior and phase structure of 9% Ni steel oxide layer are studied by means of high‐temperature oxidation experiment, scanning electron microscopy, and X‐ray diffraction. The results show that the inner and outer oxide layers of 9% Ni steel grow opposite to each other along the initial surface direction of the vertical matrix during the high‐temperature oxidation process. From the perspective of the phase, the phase transition of Fe2O3→Fe3O4→FeO mainly undergoes from the outside and the inside, the results of thermodynamic calculations show that <<<0, and the main factor affecting the phase transition is the diffusion concentration of free O and Fe atoms. During the high‐temperature oxidation process of 9% Ni steel, the diffusion of O and Fe atoms along grain boundaries promotes preferential oxidation at these boundaries. The columnar structure formed in the outer oxide layer of 9% Ni steel may be related to the uneven diffusion rate of Fe atoms at different positions at the interface between the inner and outer oxide layers.
- 5 November 2024
- Published by Wiley in Steel Research International
- Vol. 96 (3)
Early Stages of High‐Temperature Oxidation Behavior and Its Phase Evolution of 9% Ni Steel
Herein, the effects of oxygen partial pressure (5–20%) and oxidation time (0.5–6 h) on the growth behavior and phase structure of 9% Ni steel oxide layer are studied by means of high‐temperature oxidation experiment, scanning electron microscopy, and X‐ray diffraction. The results show that the inner and outer oxide layers of 9% Ni steel grow opposite to each other along the initial surface direction of the vertical matrix during the high‐temperature oxidation process. From the perspective of the phase, the phase transition of Fe2O3→Fe3O4→FeO mainly undergoes from the outside and the inside, the results of thermodynamic calculations show that <<<0, and the main factor affecting the phase transition is the diffusion concentration of free O and Fe atoms. During the high‐temperature oxidation process of 9% Ni steel, the diffusion of O and Fe atoms along grain boundaries promotes preferential oxidation at these boundaries. The columnar structure formed in the outer oxide layer of 9% Ni steel may be related to the uneven diffusion rate of Fe atoms at different positions at the interface between the inner and outer oxide layers.
- 30 May 2024
- Published by Springer Nature in Journal of Iron and Steel Research International
- Vol. 31 (7) , 1692-1703
Effect of cooling method on TiN precipitation behavior of high-titanium high-strength steel during solidification
- 30 May 2024
- Published by Springer Nature in Journal of Iron and Steel Research International
- Vol. 31 (7) , 1692-1703
Effect of cooling method on TiN precipitation behavior of high-titanium high-strength steel during solidification
- Open Access
Mechanism of Phosphorus Enrichment in Dephosphorization Slag Produced Using the Technology of Integrating Dephosphorization and Decarburization
In order to better understand and develop the technology of integrating dephosphorization and decarburization in a single converter (abbreviated as IDDSC), the relevant thermodynamic issues were discussed by calculation. Based on the thermodynamic calculation, the bridges between the phosphorus distribution ratio, temperature, and slag composition were constructed. Besides, the connections between the dephosphorization behavior and the microstructure of slag were also established by investigating four heats of hot metal smelt using IDDSC technology. As a result, the mechanism of phosphorus enrichment in the dephosphorization slag was revealed. Also, the results show that the dephosphorization efficiency increases gradually with increasing slag basicity. While the dephosphorization efficiency increases first and then decreases with the increase of FeO content in slag. There is a competition relationship between P2O5 and FeO in reacting with CaO and SiO2. When CaO/FeO is relatively high, not enough FeO is provided. Thus P2O5 is in priority to react with CaO and SiO2 through [3n + 2](CaO) + 2SiO2 + n(P2O5) = n(3CaO·P2O5)-2CaO·SiO2(s), generating P2O5-rich nC2S-C3P solid solution which promotes the removal of [P] from the hot metal. When CaO/FeO is relatively low, FeO competes over P2O5 in reacting with CaO and SiO2 through a(CaO) + b(SiO2) + c(FeO) = aCaO·bSiO2·cFeO(s), generating CaFeSiO4 instead of P2O5-rich solid solution. As a consequence, the slag with low CaO/FeO shows a poor dephosphorization ability.
Open AccessMechanism of Phosphorus Enrichment in Dephosphorization Slag Produced Using the Technology of Integrating Dephosphorization and Decarburization
In order to better understand and develop the technology of integrating dephosphorization and decarburization in a single converter (abbreviated as IDDSC), the relevant thermodynamic issues were discussed by calculation. Based on the thermodynamic calculation, the bridges between the phosphorus distribution ratio, temperature, and slag composition were constructed. Besides, the connections between the dephosphorization behavior and the microstructure of slag were also established by investigating four heats of hot metal smelt using IDDSC technology. As a result, the mechanism of phosphorus enrichment in the dephosphorization slag was revealed. Also, the results show that the dephosphorization efficiency increases gradually with increasing slag basicity. While the dephosphorization efficiency increases first and then decreases with the increase of FeO content in slag. There is a competition relationship between P2O5 and FeO in reacting with CaO and SiO2. When CaO/FeO is relatively high, not enough FeO is provided. Thus P2O5 is in priority to react with CaO and SiO2 through [3n + 2](CaO) + 2SiO2 + n(P2O5) = n(3CaO·P2O5)-2CaO·SiO2(s), generating P2O5-rich nC2S-C3P solid solution which promotes the removal of [P] from the hot metal. When CaO/FeO is relatively low, FeO competes over P2O5 in reacting with CaO and SiO2 through a(CaO) + b(SiO2) + c(FeO) = aCaO·bSiO2·cFeO(s), generating CaFeSiO4 instead of P2O5-rich solid solution. As a consequence, the slag with low CaO/FeO shows a poor dephosphorization ability.
- 31 May 2020
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 29 (5) , 3030-3039
Effect of Si Content on the Formation of {100} Orientation in 0.27% Al Non-oriented Electrical Steel during Cell-to-Dendrite Transition Process
- 31 May 2020
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 29 (5) , 3030-3039
Effect of Si Content on the Formation of {100} Orientation in 0.27% Al Non-oriented Electrical Steel during Cell-to-Dendrite Transition Process
- Open Access
A New Method for Plasticization of Inclusions in Saw-Wire Steel by NaF Addition
In this study, a new method is proposed for the plasticization of inclusions by taking advantage of the behavior of alkali metals in lowering the inclusion melting point. A series of experiments with NaF additions to molten steel were carried out using a carbon tube furnace followed by simulated rolling tests using the solidified ingots and characterization of inclusions with the help of automated scanning electron microscopy. Compositional changes of the steel and evolution of gaseous species were evaluated using thermodynamic software FactSage 7.2 (ThermFact Inc., Montreal, QC, Canada). Based on this approach, NaF/steel/inclusion interactions and the effects of NaF addition on the melting point, size and deformability of inclusions were clarified. The modification of MnO-SiO2 inclusions by NaF also promoted the removal of inclusions and improved the cleanliness of steel. The results show that with the addition of NaF, the melting point of inclusions is greatly reduced, the deformability is improved, and the removal of inclusions is enhanced, all of which indicates a good prospect for industrial application.
Open AccessA New Method for Plasticization of Inclusions in Saw-Wire Steel by NaF Addition
In this study, a new method is proposed for the plasticization of inclusions by taking advantage of the behavior of alkali metals in lowering the inclusion melting point. A series of experiments with NaF additions to molten steel were carried out using a carbon tube furnace followed by simulated rolling tests using the solidified ingots and characterization of inclusions with the help of automated scanning electron microscopy. Compositional changes of the steel and evolution of gaseous species were evaluated using thermodynamic software FactSage 7.2 (ThermFact Inc., Montreal, QC, Canada). Based on this approach, NaF/steel/inclusion interactions and the effects of NaF addition on the melting point, size and deformability of inclusions were clarified. The modification of MnO-SiO2 inclusions by NaF also promoted the removal of inclusions and improved the cleanliness of steel. The results show that with the addition of NaF, the melting point of inclusions is greatly reduced, the deformability is improved, and the removal of inclusions is enhanced, all of which indicates a good prospect for industrial application.
- Open Access
An Investigation of Friction Coefficient on Microstructure and Texture Evolution of Interstitial-Free Steel during Warm Rolling and Subsequent Annealing
A Ti bearing interstitial-free steel was finishing rolled in the ferrite region with and without lubrication and microstructures, mechanical properties and textures evolution during warm rolling and subsequent annealing were investigated by OM, SEM, tensile test and ODF. The results show that the surface microstructure of the as-rolled specimen without lubrication is composed of dense shear bands, while the microstructures of the central layer of the as-rolled specimen without lubrication and the whole cross section of the as-rolled specimen with lubrication are elongated ferrite. Short-time annealing can make the non-lubricated rolling sample recrystallize, but the lubricated rolling sample cannot. After complete recrystallization, the microstructure of the surface layer of the as-annealed specimen without lubrication is finer than that of the center layer of the as-annealed specimen without lubrication and the whole section of the as-annealed specimen with lubrication. The mechanical properties of as-annealed sample without lubrication change significantly in the initial annealing stage, while that of as-annealed sample with lubrication remain unchanged until the end stage of annealing. The surface layers of the as-rolled samples have strong Goss component and weak γ fibre components, while the central layers have strong γ fibre components and moderate rotated cubic components. As annealing proceeds, the Goss components of the surface layer decrease and the γ fibre components increase. The rotated cubic components in the central layer are gradually transformed into γ texture.
Open AccessAn Investigation of Friction Coefficient on Microstructure and Texture Evolution of Interstitial-Free Steel during Warm Rolling and Subsequent Annealing
A Ti bearing interstitial-free steel was finishing rolled in the ferrite region with and without lubrication and microstructures, mechanical properties and textures evolution during warm rolling and subsequent annealing were investigated by OM, SEM, tensile test and ODF. The results show that the surface microstructure of the as-rolled specimen without lubrication is composed of dense shear bands, while the microstructures of the central layer of the as-rolled specimen without lubrication and the whole cross section of the as-rolled specimen with lubrication are elongated ferrite. Short-time annealing can make the non-lubricated rolling sample recrystallize, but the lubricated rolling sample cannot. After complete recrystallization, the microstructure of the surface layer of the as-annealed specimen without lubrication is finer than that of the center layer of the as-annealed specimen without lubrication and the whole section of the as-annealed specimen with lubrication. The mechanical properties of as-annealed sample without lubrication change significantly in the initial annealing stage, while that of as-annealed sample with lubrication remain unchanged until the end stage of annealing. The surface layers of the as-rolled samples have strong Goss component and weak γ fibre components, while the central layers have strong γ fibre components and moderate rotated cubic components. As annealing proceeds, the Goss components of the surface layer decrease and the γ fibre components increase. The rotated cubic components in the central layer are gradually transformed into γ texture.
- 1 September 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (11) , 1165b4
Effects of Al content and solidification rate on the crystal orientation of directionally solidified 1.3 wt% Si non-oriented electrical steel
1.3 wt%Si–0.14~0.51wt%Al non-oriented silicon steel as-cast rods with developed columnar structure and pronounced Goss texture were produced using directional solidification technology. The solute enriched morphology, microstructure and crystal orientation at solid-liquid interface of rods under different solidification rates were investigated. It is found that alloying element Al has little positive branch segregation at solid-liquid interface during equiaxed-to-columnar transformation process. Higher solidification rate is favorable to the homogeneous nucleation of long columnar Goss grains, while higher Al content is beneficial to the stable nucleation and further growth of columnar Goss grain.
- 1 September 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (11) , 1165b4
Effects of Al content and solidification rate on the crystal orientation of directionally solidified 1.3 wt% Si non-oriented electrical steel
1.3 wt%Si–0.14~0.51wt%Al non-oriented silicon steel as-cast rods with developed columnar structure and pronounced Goss texture were produced using directional solidification technology. The solute enriched morphology, microstructure and crystal orientation at solid-liquid interface of rods under different solidification rates were investigated. It is found that alloying element Al has little positive branch segregation at solid-liquid interface during equiaxed-to-columnar transformation process. Higher solidification rate is favorable to the homogeneous nucleation of long columnar Goss grains, while higher Al content is beneficial to the stable nucleation and further growth of columnar Goss grain.
- 21 August 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (10) , 106592
An investigation on microstructure evolution and mechanical properties of cryogenic steel rebars under different cooling conditions
In this study, industrial trial production of the microstructure evolutions and resultant mechanical properties and finite element model of the temperature variation in the cryogenic temperature rebar subjected to the TempCore processes were presented. The microstructure of tested steel rebar is composed of ferrite, pearlite and bainite when the cooling rate is less than or equal to 5 ℃/s. The pearlite disappears when the cooling rate is 10 ℃/s, and the microstructure is composed of granular bainite and a small amount of ferrite. The microstructure consists of martensite and bainite at cooling rate of 20 ℃/s. Compared with the tested steel rebar with water flow rate of 450 m3/h, the tested steel rebar with water flow rate of 100 m3/h has an optimum mechanical strength and a higher uniform elongation at room temperature, and has a higher NSR(notch sensitivity ratio) at - 165 ℃. The uniform elongation is 7.3% at room temperature and NSR is 1.14 at -165 ℃. The ductile-brittle transition temperature of the tested steel rebar with water flow of 100 m3/h is about - 30 ℃, while which of 450 m3/h is 0 ℃. The impact energy of the tested steel bar with water flow of 100 m3/h is 2~3 times that of 450 m3/h at or below 0 ℃, which is mainly due to its ultrafine acicular ferrite and bainite containing high dislocation density and sub-grains.
- 21 August 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (10) , 106592
An investigation on microstructure evolution and mechanical properties of cryogenic steel rebars under different cooling conditions
In this study, industrial trial production of the microstructure evolutions and resultant mechanical properties and finite element model of the temperature variation in the cryogenic temperature rebar subjected to the TempCore processes were presented. The microstructure of tested steel rebar is composed of ferrite, pearlite and bainite when the cooling rate is less than or equal to 5 ℃/s. The pearlite disappears when the cooling rate is 10 ℃/s, and the microstructure is composed of granular bainite and a small amount of ferrite. The microstructure consists of martensite and bainite at cooling rate of 20 ℃/s. Compared with the tested steel rebar with water flow rate of 450 m3/h, the tested steel rebar with water flow rate of 100 m3/h has an optimum mechanical strength and a higher uniform elongation at room temperature, and has a higher NSR(notch sensitivity ratio) at - 165 ℃. The uniform elongation is 7.3% at room temperature and NSR is 1.14 at -165 ℃. The ductile-brittle transition temperature of the tested steel rebar with water flow of 100 m3/h is about - 30 ℃, while which of 450 m3/h is 0 ℃. The impact energy of the tested steel bar with water flow of 100 m3/h is 2~3 times that of 450 m3/h at or below 0 ℃, which is mainly due to its ultrafine acicular ferrite and bainite containing high dislocation density and sub-grains.