Yang Shi
Yang Shi has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Jiahua Wei
Key Laboratory of Water Ecology Remediation and Protection at Headwater Regions of Big Rivers, Ministry of Water Resources Qinghai University Xining China
3 shared publications Minglei Hou
2 shared publications- Shaowu Li
State Key Laboratory of Hydraulic Engineering Intelligent Construction and Operation, Tianjin University, Tianjin 300072, China
2 shared publications - Bangwen Zhang
Research Associate, State Key Laboratory of Simulation and Regulation of Water Cycle in River Basin, China Institute of Water Resources and Hydropower Research, Beijing 100084, PR China
1 shared publication Chongjiu Zhao
1 shared publication- Haitao Yu1 shared publication
Latest Publications
- Open Access
- 16 January 2026
- Published by Elsevier in Journal of Hydrology: Regional Studies
- Vol. 64
Spatio – temporal hydrological cycle characteristics in the upper reaches of the Yangtze River: A multi-source remote sensing and machine learning perspective
- 16 January 2026
- Published by Elsevier in Journal of Hydrology: Regional Studies
- Vol. 64
Open AccessSpatio – temporal hydrological cycle characteristics in the upper reaches of the Yangtze River: A multi-source remote sensing and machine learning perspective
- 1 November 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (11)
A numerical study of the acoustic and turbulent agglomeration processes by a coupled computational fluid dynamics–population-balance model
Acoustic agglomeration has been widely recognized as a novel technology for fog elimination and artificial precipitation. In this study, computational fluid dynamics coupled with the population-balance model was applied to investigate the agglomeration process of micro-scale droplets under the combined effects of acoustic waves and turbulent flows. The dynamic processes and distribution of turbulence, vortex characteristics, orthokinetic and hydrodynamic interactions of cloud droplets, as well as agglomeration caused by Brownian motion and turbulent flows, were studied. It was found that there was an eigenfrequency and a threshold sound intensity for acoustic agglomeration. The eigenfrequency of cloud droplets was 50–200 Hz. The threshold intensity for acoustic intervention was in the range of 100–110 dB. When the sound pressure level (SPL) was greater than 110 dB, the median size of the droplets and the spectral width of the droplet volume distribution increased with SPL. The frequency band corresponding to the optimal agglomeration effect of large droplets was relatively low. In such studies involving agglomeration processes, the effect of turbulence on droplet agglomeration should not have been neglected, and the combined effects of sound and flow on the droplet number concentration were more significant than those of pure flow. The effect of acoustic waves on agglomeration became weaker when the flow velocity increased. These insights inform future developments in particle-control technologies and atmospheric precipitation enhancement as well as guide further fundamental research on droplet agglomeration under acoustic fields.
- 1 November 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (11)
A numerical study of the acoustic and turbulent agglomeration processes by a coupled computational fluid dynamics–population-balance model
Acoustic agglomeration has been widely recognized as a novel technology for fog elimination and artificial precipitation. In this study, computational fluid dynamics coupled with the population-balance model was applied to investigate the agglomeration process of micro-scale droplets under the combined effects of acoustic waves and turbulent flows. The dynamic processes and distribution of turbulence, vortex characteristics, orthokinetic and hydrodynamic interactions of cloud droplets, as well as agglomeration caused by Brownian motion and turbulent flows, were studied. It was found that there was an eigenfrequency and a threshold sound intensity for acoustic agglomeration. The eigenfrequency of cloud droplets was 50–200 Hz. The threshold intensity for acoustic intervention was in the range of 100–110 dB. When the sound pressure level (SPL) was greater than 110 dB, the median size of the droplets and the spectral width of the droplet volume distribution increased with SPL. The frequency band corresponding to the optimal agglomeration effect of large droplets was relatively low. In such studies involving agglomeration processes, the effect of turbulence on droplet agglomeration should not have been neglected, and the combined effects of sound and flow on the droplet number concentration were more significant than those of pure flow. The effect of acoustic waves on agglomeration became weaker when the flow velocity increased. These insights inform future developments in particle-control technologies and atmospheric precipitation enhancement as well as guide further fundamental research on droplet agglomeration under acoustic fields.
- Open Access
Catchment characteristics dominate the hydrological behavior of closed lakes across the Tibetan Plateau
- 18 December 2023
- Published by Elsevier in Applied Ocean Research
- Vol. 142
Hydrodynamic performance of an elastic capsule oscillating water column type WEC: An experimental study
- 18 December 2023
- Published by Elsevier in Applied Ocean Research
- Vol. 142
Hydrodynamic performance of an elastic capsule oscillating water column type WEC: An experimental study
- 30 July 2023
- Published by Elsevier in Applied Ocean Research
- Vol. 138
Coupling SPH with a mesh-based Eulerian approach for simulation of incompressible free-surface flows
- 30 July 2023
- Published by Elsevier in Applied Ocean Research
- Vol. 138
Coupling SPH with a mesh-based Eulerian approach for simulation of incompressible free-surface flows
- Open Access
- 1 January 2019
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2019 (1)
A Meshless WCSPH Boundary Treatment for Open‐Channel Flow over Small‐Scale Rough Bed
A weakly compressible smoothed particle hydrodynamics (WCSPH) method was developed to model open‐channel flow over rough bed. An improved boundary treatment is proposed to quantitatively characterize bed roughness based on the ghost boundary particles (GBPs). In this model, the velocities of GBPs are explicitly calculated by using evolutionary polynomial regression with a multiobjective genetic algorithm. The simulation results show that the proposed boundary treatment can well reflect the influence of wall roughness on the vertical flow structure. A fully developed open channel is established, and its flume length, processing time, and turbulent model are discussed. The mixed‐length‐based subparticle scale (SPS) turbulence model is adopted to simulate uniform flow in open channel, and this model is compared with the Smagorinsky‐based one. For the modified WCSPH model, the results show that the calculated vertical velocity and turbulent shear stress distribution are in good agreement with experimental data and fit better than the calculations obtained from the traditional Smagorinsky‐based model.
- 1 January 2019
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2019 (1)
Open AccessA Meshless WCSPH Boundary Treatment for Open‐Channel Flow over Small‐Scale Rough Bed
A weakly compressible smoothed particle hydrodynamics (WCSPH) method was developed to model open‐channel flow over rough bed. An improved boundary treatment is proposed to quantitatively characterize bed roughness based on the ghost boundary particles (GBPs). In this model, the velocities of GBPs are explicitly calculated by using evolutionary polynomial regression with a multiobjective genetic algorithm. The simulation results show that the proposed boundary treatment can well reflect the influence of wall roughness on the vertical flow structure. A fully developed open channel is established, and its flume length, processing time, and turbulent model are discussed. The mixed‐length‐based subparticle scale (SPS) turbulence model is adopted to simulate uniform flow in open channel, and this model is compared with the Smagorinsky‐based one. For the modified WCSPH model, the results show that the calculated vertical velocity and turbulent shear stress distribution are in good agreement with experimental data and fit better than the calculations obtained from the traditional Smagorinsky‐based model.