Nataliia Lavrenko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Nataliia Lavrenko has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Sergiy Lavrenko
Department of Agriculture, Kherson State Agrarian and Economic University, 73006 Kherson, Ukraine
6 shared publications - Olga Gorach
Department of Food Technology, Kherson State Agrarian and Economic University, 73006 Kherson, Ukraine
2 shared publications - Pavlo Lykhovyd
Department of Irrigated Agriculture and Decarbonization of Agroecosystems, Institute of Climate-Smart Agriculture, Odessa 67667, Ukraine
2 shared publications - M. V. Maksymov1 shared publication
Oksana Lahovska
Sumy National Agrarian University
1 shared publication- Olena Melnyk
School of Agriculture, Forest and Food Sciences HAFL, Bern University of Applied Sciences BFH, Zollikofen, Switzerland
1 shared publication
Latest Publications
- Open Access
Modeling the Retting of Linseed Straw with Controlled Humidification and Consideration of the Microbiota Composition
The aim of this study was to investigate the patterns governing the conversion of oilseed flax straw into retted straw under the climatic conditions of southern Ukraine through examining moisture absorption, moisture desorption, and the associated microbiological processes. It was established that stem moisture content approaching 100% is reached within 10 min of moistening, after which the process shifts from adsorption of free water to absorption of bound water. Analysis of the moisture desorption curves demonstrated that a single moistening event is insufficient to sustain the moisture level required for active microbial proliferation, as moisture content decreases by approximately 45% within the first hour and gradually reverts to baseline values thereafter. The mathematical modeling results indicate that without supplementary moistening, the biological conversion of straw into retted straw is virtually negligible. It was found that twice-daily moistening promotes the dominance of pectinolytic microorganisms, ensuring efficient breakdown of pectic substances and the formation of high-quality retted straw. However, after 5–6 days of retting, a sharp increase in the numbers of cellulolytic and pathogenic microflora is observed, which may lead to degradation of the cellulose complex and deterioration of fiber properties. The obtained findings can be used to optimize bast biomass processing technologies, develop predictive systems for the retting process, and improve the quality of the resulting fiber.
Open AccessModeling the Retting of Linseed Straw with Controlled Humidification and Consideration of the Microbiota Composition
The aim of this study was to investigate the patterns governing the conversion of oilseed flax straw into retted straw under the climatic conditions of southern Ukraine through examining moisture absorption, moisture desorption, and the associated microbiological processes. It was established that stem moisture content approaching 100% is reached within 10 min of moistening, after which the process shifts from adsorption of free water to absorption of bound water. Analysis of the moisture desorption curves demonstrated that a single moistening event is insufficient to sustain the moisture level required for active microbial proliferation, as moisture content decreases by approximately 45% within the first hour and gradually reverts to baseline values thereafter. The mathematical modeling results indicate that without supplementary moistening, the biological conversion of straw into retted straw is virtually negligible. It was found that twice-daily moistening promotes the dominance of pectinolytic microorganisms, ensuring efficient breakdown of pectic substances and the formation of high-quality retted straw. However, after 5–6 days of retting, a sharp increase in the numbers of cellulolytic and pathogenic microflora is observed, which may lead to degradation of the cellulose complex and deterioration of fiber properties. The obtained findings can be used to optimize bast biomass processing technologies, develop predictive systems for the retting process, and improve the quality of the resulting fiber.
- Open Access
- 1 September 2026
- Published by IOP Publishing in Environmental Research Communications
- Vol. 8 (9) , 095030
Short-range spatial structure of war-driven heavy metal contamination in southern Ukraine
Military activities can cause severe soil contamination, yet the fine-scale spatial structure of war-driven contamination remains poorly understood. This study quantified the short-range spatial distribution of heavy metals in an agricultural landscape in southern Ukraine affected by active military operations using high-density field sampling and geostatistical analysis. We quantified not only how much contamination was present, but also how it was distributed across the landscape. The contamination pattern formed a heterogeneous, focal mosaic with a spatial dependence range of 54–83 m, indicating localized, event-based inputs. Pb, Zn, and Cu occurred as high-contrast hotspots associated with destroyed military equipment, whereas other elements reflected background variability or mixed sources. Indicator elements confirmed lithogenic control and provided a baseline for distinguishing natural background conditions from localized military contamination. Although 87.8% of the study area was only lightly contaminated, 2.2% comprised high-intensity hotspots that concentrated environmental and sanitary risk. These findings show that war-driven soil contamination is spatially structured rather than uniformly distributed and cannot be reliably characterized using averaged or coarse-scale assessments. High-resolution monitoring below the 54–83 m scale is therefore required to detect contamination hotspots and support risk assessment and post-conflict management of agricultural land.
- 1 September 2026
- Published by IOP Publishing in Environmental Research Communications
- Vol. 8 (9) , 095030
Open AccessShort-range spatial structure of war-driven heavy metal contamination in southern Ukraine
Military activities can cause severe soil contamination, yet the fine-scale spatial structure of war-driven contamination remains poorly understood. This study quantified the short-range spatial distribution of heavy metals in an agricultural landscape in southern Ukraine affected by active military operations using high-density field sampling and geostatistical analysis. We quantified not only how much contamination was present, but also how it was distributed across the landscape. The contamination pattern formed a heterogeneous, focal mosaic with a spatial dependence range of 54–83 m, indicating localized, event-based inputs. Pb, Zn, and Cu occurred as high-contrast hotspots associated with destroyed military equipment, whereas other elements reflected background variability or mixed sources. Indicator elements confirmed lithogenic control and provided a baseline for distinguishing natural background conditions from localized military contamination. Although 87.8% of the study area was only lightly contaminated, 2.2% comprised high-intensity hotspots that concentrated environmental and sanitary risk. These findings show that war-driven soil contamination is spatially structured rather than uniformly distributed and cannot be reliably characterized using averaged or coarse-scale assessments. High-resolution monitoring below the 54–83 m scale is therefore required to detect contamination hotspots and support risk assessment and post-conflict management of agricultural land.
- Open Access
- 11 December 2025
- Published by MDPI AG in Technologies
- Vol. 13 (12) , 582
Research on the Adhesive Properties of Flax Fiber in the Production of Composite Materials
The article presents the results of theoretical and experimental research into the adhesive properties of flax fiber and their impact on the scientific development of composite material production. The research established that combining natural fibers with a polymer material or matrix increases the complexity of the composite forming process and causes problems in the physicochemical processes of matrix–filler interaction. This is explained by the low wettability of flax bast (13.0–14.5 g). It was found that the presence of cutins on oil flax fibers determines their high degree of hydrophobicity. To improve the adhesive properties of the bast, it was chemically treated to remove cellulose companions and cutins, high-molecular-weight compounds. The bast was chemically treated using the oxidative method. After chemical treatment, a fiber enriched with cellulose and freed from waxy substances was obtained. Thus, the cellulose content increased from 47.67–53.33% to 90.01–97.68%, and the waxy substances were almost completely removed. Their content in the bast was 18.13–18.57%, but after chemical treatment, it decreased to 0.01–0.04%. After chemical treatment, the wettability of the fiber increased to the required levels −104.94–122.78 g, indicating that the adhesive properties were significantly improved. The results of studies on physical and mechanical indicators demonstrate the high quality of the obtained composites. In terms of fluidity, all samples were superior to the control sample reinforced with cotton fiber. The theoretical and experimental research enabled the collection of experimental samples of composite materials.
- 11 December 2025
- Published by MDPI AG in Technologies
- Vol. 13 (12) , 582
Open AccessResearch on the Adhesive Properties of Flax Fiber in the Production of Composite Materials
The article presents the results of theoretical and experimental research into the adhesive properties of flax fiber and their impact on the scientific development of composite material production. The research established that combining natural fibers with a polymer material or matrix increases the complexity of the composite forming process and causes problems in the physicochemical processes of matrix–filler interaction. This is explained by the low wettability of flax bast (13.0–14.5 g). It was found that the presence of cutins on oil flax fibers determines their high degree of hydrophobicity. To improve the adhesive properties of the bast, it was chemically treated to remove cellulose companions and cutins, high-molecular-weight compounds. The bast was chemically treated using the oxidative method. After chemical treatment, a fiber enriched with cellulose and freed from waxy substances was obtained. Thus, the cellulose content increased from 47.67–53.33% to 90.01–97.68%, and the waxy substances were almost completely removed. Their content in the bast was 18.13–18.57%, but after chemical treatment, it decreased to 0.01–0.04%. After chemical treatment, the wettability of the fiber increased to the required levels −104.94–122.78 g, indicating that the adhesive properties were significantly improved. The results of studies on physical and mechanical indicators demonstrate the high quality of the obtained composites. In terms of fluidity, all samples were superior to the control sample reinforced with cotton fiber. The theoretical and experimental research enabled the collection of experimental samples of composite materials.
- 3 October 2024
- Published by IGI Global Scientific Publishing
- p. 379-406
Strategic Ways of Post-War Restoration of Irrigated Agriculture in the Southern Steppe of Ukraine
The chapter outlines strategic approaches to the post-war restoration of irrigated agriculture in the Southern Steppe of Ukraine, with a focus on the Kherson region, which has been severely impacted by military operations. The region has faced significant anthropogenic damage, including military degradation of soil cover, destruction of the Kakhovka Dam and Reservoir, looting of reclamation systems, and loss of fertile soil layers. The chapter proposes a comprehensive set of ecological and remedial measures, including agronomic, remedial, and technical interventions, to restore the irrigated agriculture system. One of the keys is the restoration of hydro-technical structures such as the Kakhovka Hydro Power Plant in a revised framework. This entails an evaluation of the infrastructure and the implementation of necessary upgrades or modifications to ensure reliable functioning in the post-war context. The chapter emphasizes the importance of integrating ecological considerations into restoration efforts, such as soil conservation practices and the protection of natural habitats.
- 3 October 2024
- Published by IGI Global Scientific Publishing
- p. 379-406
Strategic Ways of Post-War Restoration of Irrigated Agriculture in the Southern Steppe of Ukraine
The chapter outlines strategic approaches to the post-war restoration of irrigated agriculture in the Southern Steppe of Ukraine, with a focus on the Kherson region, which has been severely impacted by military operations. The region has faced significant anthropogenic damage, including military degradation of soil cover, destruction of the Kakhovka Dam and Reservoir, looting of reclamation systems, and loss of fertile soil layers. The chapter proposes a comprehensive set of ecological and remedial measures, including agronomic, remedial, and technical interventions, to restore the irrigated agriculture system. One of the keys is the restoration of hydro-technical structures such as the Kakhovka Hydro Power Plant in a revised framework. This entails an evaluation of the infrastructure and the implementation of necessary upgrades or modifications to ensure reliable functioning in the post-war context. The chapter emphasizes the importance of integrating ecological considerations into restoration efforts, such as soil conservation practices and the protection of natural habitats.
- 28 June 2022
- Published by Publishing House of National Academy Agrarian Sciences of Ukraine in Міжвідомчий тематичний науковий збірник "Меліорація і водне господарство"
- No. 1,p. 89-96
Modern aspects of informatization of agricultural production based on modeling and forecasting the production process of lentils under different conditions of moisture supply
The article presents the results of the application of modern systems for modeling and forecasting the production process of lentils in the Southern Steppe of Ukraine. The correlation-regression analysis shows the high reliability and practical value of the obtained mathematical models of growing lentils for grain depending on the conventional tillage, fertilizer rate, and plant density under different moisture conditions; that is confirmed by the curves based on the experimental data and calculations. Mathematical models of lentils grain yield under different moisture conditions were compiled according to the obtained regression coefficients and free members: without irrigation - Y=1,5896+0,0032×Х1+0,0007×Х2-0,2561×Х3, and when applying irrigation Y=1,0200+0,0051×Х1+0,0022×Х2+0,2656×Х3. The following results were obtained for the dependent variable for different conditions of moisture supply after conducting a regression-normalized analysis of the researched factors in view of yield of lentils, where: in variant without irrigation R = 0.7059; R2 = 0.4983; adjusted R2 = 0.4682; F (3,50) = 16,551 p <0,00000 and standard estimation error was 0,1232; in variant with irrigation R = 0,6131; R2 = 0.3759; adjusted R2 = 0.3385; F (3.50) = 10.04 p <0.00003 and the standard estimation error was 0,2591. Nonlinear multilayer artificial neuron models have been developed for the first time to predict lentils grain yields. Generalized regression artificial neural network GRNN (4-12-7-1) with 12 neurons in the first hidden layer and seven ones in the second hidden layer; learning productivity was 0.215; control productivity was 0.290; test productivity was 0.362; learning error was 0.136; control error was 0.049; test error was 0.066. Taking into account nonlinear patterns of factor effect on lentils grain yield the multiple correlation was 0.96. Based on the results of ranking the researched factors' effect on the dynamics of formation and yield of lentils, it was found that moisture conditions (water consumption, m3/ha) with an impact factor of 4.21 which exceeds other researched factors by almost 2.2 times, are in the first place. Plant density (million/ha) was in second place with a factor of 1.62. The rate of mineral fertilizers (kg/ha of active substance) was in third place, which was slightly inferior to the density of standing plants, resulting in a total of 1.61. The depth of tillage (cm) was in the last fourth place with an impact factor of 1.01.
- 28 June 2022
- Published by Publishing House of National Academy Agrarian Sciences of Ukraine in Міжвідомчий тематичний науковий збірник "Меліорація і водне господарство"
- No. 1,p. 89-96
Modern aspects of informatization of agricultural production based on modeling and forecasting the production process of lentils under different conditions of moisture supply
The article presents the results of the application of modern systems for modeling and forecasting the production process of lentils in the Southern Steppe of Ukraine. The correlation-regression analysis shows the high reliability and practical value of the obtained mathematical models of growing lentils for grain depending on the conventional tillage, fertilizer rate, and plant density under different moisture conditions; that is confirmed by the curves based on the experimental data and calculations. Mathematical models of lentils grain yield under different moisture conditions were compiled according to the obtained regression coefficients and free members: without irrigation - Y=1,5896+0,0032×Х1+0,0007×Х2-0,2561×Х3, and when applying irrigation Y=1,0200+0,0051×Х1+0,0022×Х2+0,2656×Х3. The following results were obtained for the dependent variable for different conditions of moisture supply after conducting a regression-normalized analysis of the researched factors in view of yield of lentils, where: in variant without irrigation R = 0.7059; R2 = 0.4983; adjusted R2 = 0.4682; F (3,50) = 16,551 p <0,00000 and standard estimation error was 0,1232; in variant with irrigation R = 0,6131; R2 = 0.3759; adjusted R2 = 0.3385; F (3.50) = 10.04 p <0.00003 and the standard estimation error was 0,2591. Nonlinear multilayer artificial neuron models have been developed for the first time to predict lentils grain yields. Generalized regression artificial neural network GRNN (4-12-7-1) with 12 neurons in the first hidden layer and seven ones in the second hidden layer; learning productivity was 0.215; control productivity was 0.290; test productivity was 0.362; learning error was 0.136; control error was 0.049; test error was 0.066. Taking into account nonlinear patterns of factor effect on lentils grain yield the multiple correlation was 0.96. Based on the results of ranking the researched factors' effect on the dynamics of formation and yield of lentils, it was found that moisture conditions (water consumption, m3/ha) with an impact factor of 4.21 which exceeds other researched factors by almost 2.2 times, are in the first place. Plant density (million/ha) was in second place with a factor of 1.62. The rate of mineral fertilizers (kg/ha of active substance) was in third place, which was slightly inferior to the density of standing plants, resulting in a total of 1.61. The depth of tillage (cm) was in the last fourth place with an impact factor of 1.01.
- Open Access
- 21 March 2022
- Published by Wiley in The Scientific World Journal
- Vol. 2022, 1-6
The Study on the Relationship between Normalized Difference Vegetation Index and Fractional Green Canopy Cover in Five Selected Crops
Crop models are of great use and importance in modern agriculture. Most models imply spatial vegetation indices, such as NDVI, or canopy cover characteristics, such as FGCC, to provide estimation of crops conditions and forecast productivity. The purpose of the study was to (1) determine the possibility of mutual conversion between spatial NDVI and Canopeo-derived FGCC in five crops (grain corn, sunflower, tomato, millet, and winter wheat) and (2) estimate the precision of such a conversion. The data set of the study was formed by the OneSoil AI derived satellite imagery on NDVI for the studied crops in different stages of their growing season combined with Canopeo-processed photographs of vegetating crops in the field with FGCC percentage calculation. The sets of NDVI and FGCC values were paired up and then statistically processed to obtain polynomial equations of NDVI into FGCC and inverse conversion for each crop. The results of the study revealed that mutual conversion between spatial NDVI and Canopeo-derived FGCC is possible. There is a strong direct correlation (R2 within 0.67790.9000 depending on the crop) between the studied indices for all crops. Close-growing crops, especially winter wheat, showed the highest correlation, while row crops and especially tomatoes had a less strong relationship between vegetation indices. The models for mutual conversion between FGCC and NDVI could be incorporated into the yield simulation models to improve the forecasting capacities.
- 21 March 2022
- Published by Wiley in The Scientific World Journal
- Vol. 2022, 1-6
Open AccessThe Study on the Relationship between Normalized Difference Vegetation Index and Fractional Green Canopy Cover in Five Selected Crops
Crop models are of great use and importance in modern agriculture. Most models imply spatial vegetation indices, such as NDVI, or canopy cover characteristics, such as FGCC, to provide estimation of crops conditions and forecast productivity. The purpose of the study was to (1) determine the possibility of mutual conversion between spatial NDVI and Canopeo-derived FGCC in five crops (grain corn, sunflower, tomato, millet, and winter wheat) and (2) estimate the precision of such a conversion. The data set of the study was formed by the OneSoil AI derived satellite imagery on NDVI for the studied crops in different stages of their growing season combined with Canopeo-processed photographs of vegetating crops in the field with FGCC percentage calculation. The sets of NDVI and FGCC values were paired up and then statistically processed to obtain polynomial equations of NDVI into FGCC and inverse conversion for each crop. The results of the study revealed that mutual conversion between spatial NDVI and Canopeo-derived FGCC is possible. There is a strong direct correlation (R2 within 0.67790.9000 depending on the crop) between the studied indices for all crops. Close-growing crops, especially winter wheat, showed the highest correlation, while row crops and especially tomatoes had a less strong relationship between vegetation indices. The models for mutual conversion between FGCC and NDVI could be incorporated into the yield simulation models to improve the forecasting capacities.
- Open Access
- 4 June 2019
- Published by Oles Honchar Dnipropetrovsk National University in Biosystems Diversity
- Vol. 27 (2) , 101-105
Effect of degree of salinity on seed germination and initial growth of chickpea (Cicer arietinum)
Chickpea (Cicer arietinum L.) is one of the main pulse crops cultivated mostly in the arid and semi-arid regions of the world, very often on saline lands. The problem is that it has not been clearly determined yet what is the safe salinity degree for obtaining uniform and vigorous sprouts of the crop without significant suppression in the parameters of initial growth and development. The goal of our study was to determine the effect of different NaCl concentrations in solutions on chickpea germination and initial growth to determine the safe degree of salinity for the crop cultivation. The study was carried out in greenhouse conditions of Kherson State Agrarian University. We studied the effect of five different gradually increasing degrees of NaCl solutions on the germination percentage and initial growth of chickpea (variety Rosanna, kabuli type) that was germinated in laboratory conditions in flasks filled with sand, at the temperature of 25 oC. A significant decrease in all the studied parameters was observed with the increase of salinity degree. However, we think that a considerable decrease of the crop germination and initial growth started with NaCl concentration of 1.79 g/L: germination percentage decreased by 33.9%, plant height – by 7.8 cm, root length – by 5.5 cm in comparison to the control variant (not saline conditions). Therefore, we conclude that the chickpea can be efficiently cultivated on slightly-saline lands. Besides, the results of linear regression analysis revealed that the most susceptible stage of chickpea growth and development is germination because this stage had strong close inter-connection with the degree of salinity. Further growth of the crop was less affected by the salinity stress. We recommend cultivation of chickpea on the saline lands only with a slight salinity level.
- 4 June 2019
- Published by Oles Honchar Dnipropetrovsk National University in Biosystems Diversity
- Vol. 27 (2) , 101-105
Open AccessEffect of degree of salinity on seed germination and initial growth of chickpea (Cicer arietinum)
Chickpea (Cicer arietinum L.) is one of the main pulse crops cultivated mostly in the arid and semi-arid regions of the world, very often on saline lands. The problem is that it has not been clearly determined yet what is the safe salinity degree for obtaining uniform and vigorous sprouts of the crop without significant suppression in the parameters of initial growth and development. The goal of our study was to determine the effect of different NaCl concentrations in solutions on chickpea germination and initial growth to determine the safe degree of salinity for the crop cultivation. The study was carried out in greenhouse conditions of Kherson State Agrarian University. We studied the effect of five different gradually increasing degrees of NaCl solutions on the germination percentage and initial growth of chickpea (variety Rosanna, kabuli type) that was germinated in laboratory conditions in flasks filled with sand, at the temperature of 25 oC. A significant decrease in all the studied parameters was observed with the increase of salinity degree. However, we think that a considerable decrease of the crop germination and initial growth started with NaCl concentration of 1.79 g/L: germination percentage decreased by 33.9%, plant height – by 7.8 cm, root length – by 5.5 cm in comparison to the control variant (not saline conditions). Therefore, we conclude that the chickpea can be efficiently cultivated on slightly-saline lands. Besides, the results of linear regression analysis revealed that the most susceptible stage of chickpea growth and development is germination because this stage had strong close inter-connection with the degree of salinity. Further growth of the crop was less affected by the salinity stress. We recommend cultivation of chickpea on the saline lands only with a slight salinity level.