Yaser Samimi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yaser Samimi has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
Hamid Shahriari
Department of Industrial Engineering K. N. Toosi University of Technology Tehran Iran
2 shared publicationsAbdollah Aghaei
KNTU University
1 shared publication- Ahmad Asl Hadad
KNTU University
1 shared publication Elham Keyvani
Department of Industrial Engineering, North Tehran Branch Islamic Azad University Tehran Iran
1 shared publication- Emad Roghanian
Department of Industrial Engineering, K.N. Toosi University of Technology, Tehran, Iran
1 shared publication Farid Hassanvand
Department of Industrial Engineering K.N. Toosi University of Technology Tehran Iran
1 shared publication
Latest Publications
- 2 October 2024
- Published by Wiley in Quality and Reliability Engineering International
- Vol. 41 (1) , 401-424
A new control chart based on proportional hazards and frailty regression models for monitoring high‐quality processes with censored observations
Improving quality and reducing defects in various processes have led to the design of numerous control charts for monitoring count data. These charts are characterized by a large number of zero defects and are modeled with zero‐inflated distributions. Besides, it is important to consider the influence of key factors on the number of defects in some processes. This paper presents three monitoring scenarios that utilize cumulative sum (CUSUM) control charts in Phase II. These scenarios are valuable for monitoring high‐quality processes, particularly with censored observations. The first scenario uses a zero‐inflated Poisson (ZIP) distribution while the second one employs a proportional hazards regression model to account for observed variables. The third scenario combines the proportional hazards and frailty regression models to consider both observed and unobserved variables. The performance of all three control charts is evaluated by applying shifts to both parameters of the ZIP distribution separately and simultaneously. Extensive simulation studies are conducted and the effects of low, moderate, and high censoring rates are thoroughly studied. The results highlight the importance of considering influential variables for detecting early shifts, as neglecting them significantly impairs the control chart performance. Finally, a real case study, involving defect counts in printed rolls at a label printing factory, has been provided and discussed to show the application of the monitoring procedures.
- 2 October 2024
- Published by Wiley in Quality and Reliability Engineering International
- Vol. 41 (1) , 401-424
A new control chart based on proportional hazards and frailty regression models for monitoring high‐quality processes with censored observations
Improving quality and reducing defects in various processes have led to the design of numerous control charts for monitoring count data. These charts are characterized by a large number of zero defects and are modeled with zero‐inflated distributions. Besides, it is important to consider the influence of key factors on the number of defects in some processes. This paper presents three monitoring scenarios that utilize cumulative sum (CUSUM) control charts in Phase II. These scenarios are valuable for monitoring high‐quality processes, particularly with censored observations. The first scenario uses a zero‐inflated Poisson (ZIP) distribution while the second one employs a proportional hazards regression model to account for observed variables. The third scenario combines the proportional hazards and frailty regression models to consider both observed and unobserved variables. The performance of all three control charts is evaluated by applying shifts to both parameters of the ZIP distribution separately and simultaneously. Extensive simulation studies are conducted and the effects of low, moderate, and high censoring rates are thoroughly studied. The results highlight the importance of considering influential variables for detecting early shifts, as neglecting them significantly impairs the control chart performance. Finally, a real case study, involving defect counts in printed rolls at a label printing factory, has been provided and discussed to show the application of the monitoring procedures.
- 7 March 2024
- Published by Wiley in Quality and Reliability Engineering International
- Vol. 40 (5) , 2547-2569
Reliability modeling of systems with random failure threshold subjected to cumulative shocks using machine learning method
Modeling and evaluation of a system reliability is a key issue in shock model analysis. In cumulative shock model, a system fails when the total damages caused by shocks exceeds the system failure threshold level. The reliability of a system with random failure threshold level under cumulative shocks is investigated in this work, considering the general dependency between inter‐arrival times of shocks and their damages magnitudes. Clustering, as one of the unsupervised machine learning methods, is utilized here by applying a genetic algorithm (GA) and particle swarm optimization algorithm (PSO) for its implementation. Phase‐type (PH) distributions and their properties are also applied for finding a system failure distribution functions, determining the convolutions, evaluating the integrals, and ultimately modeling the system reliability. An illustrative example is provided to demonstrate the implementation and effectiveness of the proposed modeling procedure and the suggested approach for computing the system reliability and remaining useful lifetime (RUL). Also, an example case study of X‐ray machine in healthcare industry is provided to demonstrate the application of the proposed model. Applying other machine learning methods for patterns recognition is an area for future research.
- 7 March 2024
- Published by Wiley in Quality and Reliability Engineering International
- Vol. 40 (5) , 2547-2569
Reliability modeling of systems with random failure threshold subjected to cumulative shocks using machine learning method
Modeling and evaluation of a system reliability is a key issue in shock model analysis. In cumulative shock model, a system fails when the total damages caused by shocks exceeds the system failure threshold level. The reliability of a system with random failure threshold level under cumulative shocks is investigated in this work, considering the general dependency between inter‐arrival times of shocks and their damages magnitudes. Clustering, as one of the unsupervised machine learning methods, is utilized here by applying a genetic algorithm (GA) and particle swarm optimization algorithm (PSO) for its implementation. Phase‐type (PH) distributions and their properties are also applied for finding a system failure distribution functions, determining the convolutions, evaluating the integrals, and ultimately modeling the system reliability. An illustrative example is provided to demonstrate the implementation and effectiveness of the proposed modeling procedure and the suggested approach for computing the system reliability and remaining useful lifetime (RUL). Also, an example case study of X‐ray machine in healthcare industry is provided to demonstrate the application of the proposed model. Applying other machine learning methods for patterns recognition is an area for future research.
- 14 February 2022
- Published by Wiley in Quality and Reliability Engineering International
- Vol. 38 (5) , 2445-2474
Monitoring multistage multivariate therapeutic processes using risk‐adjusted model‐based group multivariate EWMA control chart
There exist multitude of therapeutic processes and the results are commonly observed during various dependent steps. For studying such processes that are referred to as multistage therapeutic processes, two concepts are of particular importance; risk adjustment and cascade property. To monitor such processes, a variety of control charts including model‐based control charts are used. In order to design model‐based control charts, analysts must first recognize a suitable model to identify the multistage processes by considering process risks and cascade property. Based on the identified model, the control charts can be proposed. In this study, a risk‐adjusted time‐variant linear state space model is introduced. Afterward, the model order and its parameters are estimated based on Hankel singular value decomposition (HSVD) and prediction error minimization (PEM) methods. Then, the group multivariate exponentially weighted moving average (GMEWMA) control chart is used to monitor a multistage multivariate therapeutic process. To evaluate the performance of the model‐based control chart, a simulation study as well as a two‐stage thyroid cancer surgery was used. Results show that the proposed control chart performs well for predicting and monitoring of multistage multivariate therapeutic processes in real world.
- 14 February 2022
- Published by Wiley in Quality and Reliability Engineering International
- Vol. 38 (5) , 2445-2474
Monitoring multistage multivariate therapeutic processes using risk‐adjusted model‐based group multivariate EWMA control chart
There exist multitude of therapeutic processes and the results are commonly observed during various dependent steps. For studying such processes that are referred to as multistage therapeutic processes, two concepts are of particular importance; risk adjustment and cascade property. To monitor such processes, a variety of control charts including model‐based control charts are used. In order to design model‐based control charts, analysts must first recognize a suitable model to identify the multistage processes by considering process risks and cascade property. Based on the identified model, the control charts can be proposed. In this study, a risk‐adjusted time‐variant linear state space model is introduced. Afterward, the model order and its parameters are estimated based on Hankel singular value decomposition (HSVD) and prediction error minimization (PEM) methods. Then, the group multivariate exponentially weighted moving average (GMEWMA) control chart is used to monitor a multistage multivariate therapeutic process. To evaluate the performance of the model‐based control chart, a simulation study as well as a two‐stage thyroid cancer surgery was used. Results show that the proposed control chart performs well for predicting and monitoring of multistage multivariate therapeutic processes in real world.
- 18 May 2021
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 118 (1-2) , 67-84
Parametric and non-parametric methods for monitoring nonlinear fuzzy profiles
- 18 May 2021
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 118 (1-2) , 67-84
Parametric and non-parametric methods for monitoring nonlinear fuzzy profiles
- 22 August 2019
- Published by Wiley in Quality and Reliability Engineering International
- Vol. 35 (8) , 2749-2773
A robust control chart for simple linear profiles in two‐stage processes
In many manufacturing systems, the final product is the result of several dependent stages. In particular, in multistage processes, the quality characteristics of downstream stages are influenced by those in the earlier stages (upstream). This property is referred to as the cascade property, which, if disregarded in process monitoring, may bring about misleading results for the subsequent fault diagnosis. Considering the relationships among consecutive stages of the process, the U statistic is the most widely used method for monitoring multistage processes. Using this method, our paper deals with monitoring a two‐stage process where quality characteristics are represented as simple linear profiles. To guard against the detrimental effect of contaminated data in the phase I of statistical process control, two well‐known robust M‐estimators, including Huber's and bi‐square, are employed for estimation of the process parameters. Under different degrees of autocorrelation across stages of the process and also for different contamination rates, the performances of the proposed methods are compared with that of the conventional least‐square method. From the viewpoint of estimation performance measures, including unbiasedness and efficiency, along with the capability of the control chart in identifying the true source of variation, extensive simulation results reveal that robust estimators outperform the traditional method in a two‐stage process. Meanwhile, it should be noted when there is contamination only in the first stage of the process, the least‐square method performs slightly better.
- 22 August 2019
- Published by Wiley in Quality and Reliability Engineering International
- Vol. 35 (8) , 2749-2773
A robust control chart for simple linear profiles in two‐stage processes
In many manufacturing systems, the final product is the result of several dependent stages. In particular, in multistage processes, the quality characteristics of downstream stages are influenced by those in the earlier stages (upstream). This property is referred to as the cascade property, which, if disregarded in process monitoring, may bring about misleading results for the subsequent fault diagnosis. Considering the relationships among consecutive stages of the process, the U statistic is the most widely used method for monitoring multistage processes. Using this method, our paper deals with monitoring a two‐stage process where quality characteristics are represented as simple linear profiles. To guard against the detrimental effect of contaminated data in the phase I of statistical process control, two well‐known robust M‐estimators, including Huber's and bi‐square, are employed for estimation of the process parameters. Under different degrees of autocorrelation across stages of the process and also for different contamination rates, the performances of the proposed methods are compared with that of the conventional least‐square method. From the viewpoint of estimation performance measures, including unbiasedness and efficiency, along with the capability of the control chart in identifying the true source of variation, extensive simulation results reveal that robust estimators outperform the traditional method in a two‐stage process. Meanwhile, it should be noted when there is contamination only in the first stage of the process, the least‐square method performs slightly better.
- Open Access
- 1 July 2019
- Published by CMV Verlag in Journal of Control
- Vol. 13 (1) , 9-20
Service Quality Management Modeling, Controlling and Upgrading as well as Communications and Information Technology Enhancement through Conducting a Case Study in the Parent Telecommunications Network of Iran
This paper reviews the service quality management control and upgrade as well as the communications and information technology enhancement. The purpose of this research is the control and improvement of the service quality management as well as the enhancement of the parent telecommunications network of I.R.Iran that finally, taking the ...
- 1 July 2019
- Published by CMV Verlag in Journal of Control
- Vol. 13 (1) , 9-20
Open AccessService Quality Management Modeling, Controlling and Upgrading as well as Communications and Information Technology Enhancement through Conducting a Case Study in the Parent Telecommunications Network of Iran
This paper reviews the service quality management control and upgrade as well as the communications and information technology enhancement. The purpose of this research is the control and improvement of the service quality management as well as the enhancement of the parent telecommunications network of I.R.Iran that finally, taking the ...