James M. Hodges
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
James M. Hodges has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Ayat Tassanov
Department of Chemistry The Pennsylvania State University, University Park Pennsylvania USA
7 shared publications - Huiju Lee
Department of Mechanical and Materials Engineering Portland State University Portland Oregon USA
5 shared publications - Yi Xia
Department of Mechanical and Materials Engineering Portland State University Portland Oregon USA
5 shared publications Yi Xia
Department of Mechanical and Materials Engineering
4 shared publications- Brendan Troesch
Penn State University
3 shared publications - Azamat Yessengazin
Department of Chemistry The Pennsylvania State University, University Park Pennsylvania USA
2 shared publications
Latest Publications
- 6 November 2026
- Published by Wiley in Angewandte Chemie
James M. Hodges
- 6 November 2026
- Published by Wiley in Angewandte Chemie International Edition
James M. Hodges
- Open Access
- 17 October 2026
- Published by Wiley in Angewandte Chemie International Edition
Dimensional Reduction of Transition Metal Dichalcogenides by Oxide Insertion: Quasi‐1D Oxychalcogenide Semiconductors
Heteroanionic solids offer unique levers for tuning structures and properties, but accessing multianion phase space remains challenging due to mismatches in anion reactivity. Here, we describe a new family of A 2 Hf 3 Q 6 O (A = K, Rb, Cs; Q = S, Se) oxychalcogenides, the first reported in the A─Hf─Q─O quaternary space, which are prepared by reacting HfQ 2 with the corresponding alkali carbonate (A 2 CO 3 ). The resulting structures are dimensionally reduced variants of the 1T‐HfQ 2 parent phase, where rows of O atoms insert into the transition metal dichalcogenide (TMD) layers. This yields nanometer‐wide 1D‐[Hf 3 Q 6 ] ribbons that link into step‐like sheets through distinctive Hf─O─Hf bridges, which connect heteroleptic HfQ 5 O polyhedra at the ribbon edges. UV/Vis and photoluminescence spectra reveal tunable absorption and emission features spanning 1.8–2.6 eV. Calculated band structures show direct‐gap transitions and highly dispersive bands along the [Hf 3 Q 6 ] nanoribbons, yielding effective masses more than two orders of magnitude lower than in other crystallographic directions. Charge‐density plots further illustrate quasi‐1D electronic anisotropy, showing frontier orbitals confined to the nanoribbons due to covalent Hf─Q bonding. We anticipate heteroanion‐driven dimensional reduction can be used to engineer anisotropy in semiconductors and offers new routes to synthetically challenging multianion systems.
- 17 October 2026
- Published by Wiley in Angewandte Chemie International Edition
Open AccessDimensional Reduction of Transition Metal Dichalcogenides by Oxide Insertion: Quasi‐1D Oxychalcogenide Semiconductors
Heteroanionic solids offer unique levers for tuning structures and properties, but accessing multianion phase space remains challenging due to mismatches in anion reactivity. Here, we describe a new family of A 2 Hf 3 Q 6 O (A = K, Rb, Cs; Q = S, Se) oxychalcogenides, the first reported in the A─Hf─Q─O quaternary space, which are prepared by reacting HfQ 2 with the corresponding alkali carbonate (A 2 CO 3 ). The resulting structures are dimensionally reduced variants of the 1T‐HfQ 2 parent phase, where rows of O atoms insert into the transition metal dichalcogenide (TMD) layers. This yields nanometer‐wide 1D‐[Hf 3 Q 6 ] ribbons that link into step‐like sheets through distinctive Hf─O─Hf bridges, which connect heteroleptic HfQ 5 O polyhedra at the ribbon edges. UV/Vis and photoluminescence spectra reveal tunable absorption and emission features spanning 1.8–2.6 eV. Calculated band structures show direct‐gap transitions and highly dispersive bands along the [Hf 3 Q 6 ] nanoribbons, yielding effective masses more than two orders of magnitude lower than in other crystallographic directions. Charge‐density plots further illustrate quasi‐1D electronic anisotropy, showing frontier orbitals confined to the nanoribbons due to covalent Hf─Q bonding. We anticipate heteroanion‐driven dimensional reduction can be used to engineer anisotropy in semiconductors and offers new routes to synthetically challenging multianion systems.
- Open Access
- 17 October 2026
- Published by Wiley in Angewandte Chemie
- p. e1906484
Dimensional Reduction of Transition Metal Dichalcogenides by Oxide Insertion: Quasi‐1D Oxychalcogenide Semiconductors
Heteroanionic solids offer unique levers for tuning structures and properties, but accessing multianion phase space remains challenging due to mismatches in anion reactivity. Here, we describe a new family of A 2 Hf 3 Q 6 O (A = K, Rb, Cs; Q = S, Se) oxychalcogenides, the first reported in the A─Hf─Q─O quaternary space, which are prepared by reacting HfQ 2 with the corresponding alkali carbonate (A 2 CO 3 ). The resulting structures are dimensionally reduced variants of the 1T‐HfQ 2 parent phase, where rows of O atoms insert into the transition metal dichalcogenide (TMD) layers. This yields nanometer‐wide 1D‐[Hf 3 Q 6 ] ribbons that link into step‐like sheets through distinctive Hf─O─Hf bridges, which connect heteroleptic HfQ 5 O polyhedra at the ribbon edges. UV/Vis and photoluminescence spectra reveal tunable absorption and emission features spanning 1.8–2.6 eV. Calculated band structures show direct‐gap transitions and highly dispersive bands along the [Hf 3 Q 6 ] nanoribbons, yielding effective masses more than two orders of magnitude lower than in other crystallographic directions. Charge‐density plots further illustrate quasi‐1D electronic anisotropy, showing frontier orbitals confined to the nanoribbons due to covalent Hf─Q bonding. We anticipate heteroanion‐driven dimensional reduction can be used to engineer anisotropy in semiconductors and offers new routes to synthetically challenging multianion systems.
- 17 October 2026
- Published by Wiley in Angewandte Chemie
- p. e1906484
Open AccessDimensional Reduction of Transition Metal Dichalcogenides by Oxide Insertion: Quasi‐1D Oxychalcogenide Semiconductors
Heteroanionic solids offer unique levers for tuning structures and properties, but accessing multianion phase space remains challenging due to mismatches in anion reactivity. Here, we describe a new family of A 2 Hf 3 Q 6 O (A = K, Rb, Cs; Q = S, Se) oxychalcogenides, the first reported in the A─Hf─Q─O quaternary space, which are prepared by reacting HfQ 2 with the corresponding alkali carbonate (A 2 CO 3 ). The resulting structures are dimensionally reduced variants of the 1T‐HfQ 2 parent phase, where rows of O atoms insert into the transition metal dichalcogenide (TMD) layers. This yields nanometer‐wide 1D‐[Hf 3 Q 6 ] ribbons that link into step‐like sheets through distinctive Hf─O─Hf bridges, which connect heteroleptic HfQ 5 O polyhedra at the ribbon edges. UV/Vis and photoluminescence spectra reveal tunable absorption and emission features spanning 1.8–2.6 eV. Calculated band structures show direct‐gap transitions and highly dispersive bands along the [Hf 3 Q 6 ] nanoribbons, yielding effective masses more than two orders of magnitude lower than in other crystallographic directions. Charge‐density plots further illustrate quasi‐1D electronic anisotropy, showing frontier orbitals confined to the nanoribbons due to covalent Hf─Q bonding. We anticipate heteroanion‐driven dimensional reduction can be used to engineer anisotropy in semiconductors and offers new routes to synthetically challenging multianion systems.
- Open Access
- 28 September 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Charge-Encoded Anion Sublattices Drive Ordering and Phase Selection in Layered Chalcogenides
Predicting the sites where anions order in a crystal, and when that ordering drives structural rearrangement, remains a challenge in mixed-anion chemistry. Here we show that both are linked to the distribution of charge on the anion sublattice of ACuMIVQ3 chalcogenides. Bader analysis of four competing polymorphs reveals that the sequencing of polyhedra controls the range of charge across anion sites (Δq) and programs each structure with a distinct charge-encoded anion sublattice. Thirteen new mixedchalcogen compounds were prepared, and the anion site occupancies were determined through single crystal X-ray diffraction. While sulfoselenides tend to adopt structures with small Δq, where they form near-ideal solid solutions, greater anion disparity in the selenotellurides and sulfotellurides leads to enhanced ordering, which drives formation of alternate structures with higher Δq. These structures provide terraced charge landscapes with more strongly differentiated sites, suggesting that structure selection depends on how well the anion sublattice matches the chemical disparity of the anion mixture. This trend culminates in KCuZrTeSeS, where S, Se, and Te order across three distinct sites in the Pnma structure, a phase not adopted by any single-anion end member, and the first demonstration of site-selective ordering of all three chalcogens in a single material. An enrichment factor connecting site occupancy with Bader charge further shows that the most electronegative chalcogen in a given mixture preferentially occupies the highest-charge site. Together, the results establish charge-encoded anion sublattices as a framework for predicting anion ordering and phase selection in extended solids.
- 28 September 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessCharge-Encoded Anion Sublattices Drive Ordering and Phase Selection in Layered Chalcogenides
Predicting the sites where anions order in a crystal, and when that ordering drives structural rearrangement, remains a challenge in mixed-anion chemistry. Here we show that both are linked to the distribution of charge on the anion sublattice of ACuMIVQ3 chalcogenides. Bader analysis of four competing polymorphs reveals that the sequencing of polyhedra controls the range of charge across anion sites (Δq) and programs each structure with a distinct charge-encoded anion sublattice. Thirteen new mixedchalcogen compounds were prepared, and the anion site occupancies were determined through single crystal X-ray diffraction. While sulfoselenides tend to adopt structures with small Δq, where they form near-ideal solid solutions, greater anion disparity in the selenotellurides and sulfotellurides leads to enhanced ordering, which drives formation of alternate structures with higher Δq. These structures provide terraced charge landscapes with more strongly differentiated sites, suggesting that structure selection depends on how well the anion sublattice matches the chemical disparity of the anion mixture. This trend culminates in KCuZrTeSeS, where S, Se, and Te order across three distinct sites in the Pnma structure, a phase not adopted by any single-anion end member, and the first demonstration of site-selective ordering of all three chalcogens in a single material. An enrichment factor connecting site occupancy with Bader charge further shows that the most electronegative chalcogen in a given mixture preferentially occupies the highest-charge site. Together, the results establish charge-encoded anion sublattices as a framework for predicting anion ordering and phase selection in extended solids.
- Open Access
- 10 June 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (12) , 5938-5946
Structure–Optical Property Relationships in AMM′Q 3 Chalcogenides
Ten ACuHfQ3 (A = Na, K, Rb, Cs; Q = S, Se, Te) chalcogenides were prepared via high-temperature solid-state methods and structurally characterized using single-crystal X-ray diffraction. The type-I AMM′Q3 structures are defined by the arrangement of HfQ6 octahedra (O) and CuQ4 tetrahedra (T) in their layers, which adopt either OTOT (Cmcm, Pnma) or OOTT (Pnma, P21/m) connectivity. UV–vis absorption and photoluminescence spectra indicate optical band gaps ranging from 1.2 to 1.7 eV and reveal that OTOT and OOTT variants have direct and indirect band gaps, respectively. Density functional theory calculations corroborate these experimental observations, demonstrating that this structure–property relationship extends across the broader type-I AMM′Q3 family. A survey of reported compounds reveals trends linking ionic radii to structure, wherein systems with larger alkali (A+) cations and small chalcogen (Q2–) anions preferentially adopt OTOT connectivity. To formalize this trend, a machine learning model was trained on the expanded data set and used to classify compounds as either OTOT or OOTT based on ionic radii descriptors. From the model, we construct a two-dimensional structure–property map that provides a semiquantitative framework for predicting the phase and optical features in related quaternary systems. Together, these results establish a structure–property relationship in an important class of chalcogenides and demonstrate a strategy for targeting optical properties through integrated experiment and theory.
- 10 June 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (12) , 5938-5946
Open AccessStructure–Optical Property Relationships in AMM′Q 3 Chalcogenides
Ten ACuHfQ3 (A = Na, K, Rb, Cs; Q = S, Se, Te) chalcogenides were prepared via high-temperature solid-state methods and structurally characterized using single-crystal X-ray diffraction. The type-I AMM′Q3 structures are defined by the arrangement of HfQ6 octahedra (O) and CuQ4 tetrahedra (T) in their layers, which adopt either OTOT (Cmcm, Pnma) or OOTT (Pnma, P21/m) connectivity. UV–vis absorption and photoluminescence spectra indicate optical band gaps ranging from 1.2 to 1.7 eV and reveal that OTOT and OOTT variants have direct and indirect band gaps, respectively. Density functional theory calculations corroborate these experimental observations, demonstrating that this structure–property relationship extends across the broader type-I AMM′Q3 family. A survey of reported compounds reveals trends linking ionic radii to structure, wherein systems with larger alkali (A+) cations and small chalcogen (Q2–) anions preferentially adopt OTOT connectivity. To formalize this trend, a machine learning model was trained on the expanded data set and used to classify compounds as either OTOT or OOTT based on ionic radii descriptors. From the model, we construct a two-dimensional structure–property map that provides a semiquantitative framework for predicting the phase and optical features in related quaternary systems. Together, these results establish a structure–property relationship in an important class of chalcogenides and demonstrate a strategy for targeting optical properties through integrated experiment and theory.
- 1 June 2026
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 26 (1)
Cation disorder in AgSbTe 2 leads to glasslike ultralow lattice thermal conductivity
- 1 June 2026
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 26 (1)
Cation disorder in AgSbTe 2 leads to glasslike ultralow lattice thermal conductivity
- Open Access
- 9 February 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 130 (7) , 1524-1533
Immersion Freezing Efficiency of ZnAl 2 O 4 and MgAl 2 O 4 Spinels, ZnO, and MgO: The Role of Oxygen Vacancies
Aerosol particles that catalyze ice nucleation alter the optical properties and precipitation cycles of clouds. Although mineral dust aerosol particles containing metal oxides are susceptible to the formation of oxygen vacancies (VO) on their surfaces, the impact of these defects on ice nucleation activity has not been addressed. To investigate the impact of VO sites, we conducted a droplet immersion freezing assay on zinc aluminate (ZnAl2O4) and magnesium aluminate (MgAl2O4) spinels annealed under air, nitrogen, and oxygen atmospheres. We observe that samples annealed under nitrogen promote ice nucleation at warmer temperatures compared to those treated in oxidizing atmospheres, with the effect being most pronounced for ZnAl2O4. To further understand these results, we investigated the immersion freezing of zinc oxide (ZnO) and magnesium oxide (MgO). Here, we observe that ZnO nucleates ice at substantially warmer temperatures than MgO after annealing under nitrogen. We hypothesize that the trends in ice nucleation activity are due to the varying concentrations of VO that form during the annealing process on the oxide surfaces, which tend to be higher in the absence of O2. Density functional theory (DFT) calculations support our hypothesis, indicating that VO is more stable on the surfaces of the Zn-containing oxides. The study suggests that oxygen vacancies, which are common defects on metal oxide surfaces that affect their adsorption and catalytic properties, can influence the efficiency with which mineral dust aerosol particles activate ice formation and affect cloud radiative forcing.
- 9 February 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 130 (7) , 1524-1533
Open AccessImmersion Freezing Efficiency of ZnAl 2 O 4 and MgAl 2 O 4 Spinels, ZnO, and MgO: The Role of Oxygen Vacancies
Aerosol particles that catalyze ice nucleation alter the optical properties and precipitation cycles of clouds. Although mineral dust aerosol particles containing metal oxides are susceptible to the formation of oxygen vacancies (VO) on their surfaces, the impact of these defects on ice nucleation activity has not been addressed. To investigate the impact of VO sites, we conducted a droplet immersion freezing assay on zinc aluminate (ZnAl2O4) and magnesium aluminate (MgAl2O4) spinels annealed under air, nitrogen, and oxygen atmospheres. We observe that samples annealed under nitrogen promote ice nucleation at warmer temperatures compared to those treated in oxidizing atmospheres, with the effect being most pronounced for ZnAl2O4. To further understand these results, we investigated the immersion freezing of zinc oxide (ZnO) and magnesium oxide (MgO). Here, we observe that ZnO nucleates ice at substantially warmer temperatures than MgO after annealing under nitrogen. We hypothesize that the trends in ice nucleation activity are due to the varying concentrations of VO that form during the annealing process on the oxide surfaces, which tend to be higher in the absence of O2. Density functional theory (DFT) calculations support our hypothesis, indicating that VO is more stable on the surfaces of the Zn-containing oxides. The study suggests that oxygen vacancies, which are common defects on metal oxide surfaces that affect their adsorption and catalytic properties, can influence the efficiency with which mineral dust aerosol particles activate ice formation and affect cloud radiative forcing.
- Open Access
- 9 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Immersion Freezing Efficiency of ZnAl2O4 and MgAl2O4 Spinels, ZnO, and MgO: The Role of Oxygen Vacancies
Aerosol particles that catalyze ice nucleation alter the optical properties and precipitation cycles of clouds. Although mineral dust aerosol particles containing metal oxides are susceptible to the formation of oxygen vacancies (VO) on their surfaces, the impact of these defects on ice nucleation activity has not been addressed. To investigate the impact of VO sites, we conducted a droplet immersion freezing assay on zinc aluminate (ZnAl2O4) and magnesium aluminate (MgAl2O4) spinels annealed under air, nitrogen, and oxygen atmospheres. We observe that samples annealed under nitrogen promote ice nucleation at warmer temperatures compared to those treated in oxidizing atmospheres, with the effecting being most pronounced for ZnAl2O4. To further understand these results, we investigated the immersion freezing of zinc oxide (ZnO) and magnesium oxide (MgO). Here, we observe that ZnO nucleates ice at substantially warmer temperatures than MgO after annealing under nitrogen. We hypothesize the trends in ice nucleation activity are due to the varying concentrations of VO that form during the annealing process on the oxide surfaces, which tend to be higher in the absence of O2. Density functional theory (DFT) calculations support our hypothesis, indicating VO are more stable on the surfaces of the Zn-containing oxides. The study suggests that oxygen vacancies, which are common defects on metal oxide surfaces that affect their adsorption and catalytic properties, can influence the efficiency with which mineral dust aerosol particles activate ice formation and affect cloud radiative forcing.
- 9 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessImmersion Freezing Efficiency of ZnAl2O4 and MgAl2O4 Spinels, ZnO, and MgO: The Role of Oxygen Vacancies
Aerosol particles that catalyze ice nucleation alter the optical properties and precipitation cycles of clouds. Although mineral dust aerosol particles containing metal oxides are susceptible to the formation of oxygen vacancies (VO) on their surfaces, the impact of these defects on ice nucleation activity has not been addressed. To investigate the impact of VO sites, we conducted a droplet immersion freezing assay on zinc aluminate (ZnAl2O4) and magnesium aluminate (MgAl2O4) spinels annealed under air, nitrogen, and oxygen atmospheres. We observe that samples annealed under nitrogen promote ice nucleation at warmer temperatures compared to those treated in oxidizing atmospheres, with the effecting being most pronounced for ZnAl2O4. To further understand these results, we investigated the immersion freezing of zinc oxide (ZnO) and magnesium oxide (MgO). Here, we observe that ZnO nucleates ice at substantially warmer temperatures than MgO after annealing under nitrogen. We hypothesize the trends in ice nucleation activity are due to the varying concentrations of VO that form during the annealing process on the oxide surfaces, which tend to be higher in the absence of O2. Density functional theory (DFT) calculations support our hypothesis, indicating VO are more stable on the surfaces of the Zn-containing oxides. The study suggests that oxygen vacancies, which are common defects on metal oxide surfaces that affect their adsorption and catalytic properties, can influence the efficiency with which mineral dust aerosol particles activate ice formation and affect cloud radiative forcing.
- Open Access
- 23 July 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Synthesis of M1-MoVBiOx from Metal Oxide Precursors with High Activity for Oxidative Dehydrogenation of Ethane
MoV-based oxides with the M1 phase are an important family of catalysts for oxidative dehydrogenation (ODH) of light alkanes. M1 materials are typically synthesized using multi-step protocol that require expen-sive precursors and high-temperature processing to induce crystallization. Here, we use a single-step hydro-thermal route to generate phase-pure MoV0.3Bi0.05Ox, a Bi-containing M1 analogue that is inaccessible using conventional methods. The approach employs simple oxide precursors, which are reacted in the presence of carboxylic acids and ethylene glycol to give M1 product in high yields. The MoVBiOx crystals have belt-like morphology and show high activity for ethane-ODH, while also maintaining ethylene selectivity greater than 75% at 80% ethane conversion. We anticipate this chemistry can be used to generate other synthetically chal-lenging mixed-metal oxides and readily scale to meet the needs of commercial applications.
- 23 July 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessSynthesis of M1-MoVBiOx from Metal Oxide Precursors with High Activity for Oxidative Dehydrogenation of Ethane
MoV-based oxides with the M1 phase are an important family of catalysts for oxidative dehydrogenation (ODH) of light alkanes. M1 materials are typically synthesized using multi-step protocol that require expen-sive precursors and high-temperature processing to induce crystallization. Here, we use a single-step hydro-thermal route to generate phase-pure MoV0.3Bi0.05Ox, a Bi-containing M1 analogue that is inaccessible using conventional methods. The approach employs simple oxide precursors, which are reacted in the presence of carboxylic acids and ethylene glycol to give M1 product in high yields. The MoVBiOx crystals have belt-like morphology and show high activity for ethane-ODH, while also maintaining ethylene selectivity greater than 75% at 80% ethane conversion. We anticipate this chemistry can be used to generate other synthetically chal-lenging mixed-metal oxides and readily scale to meet the needs of commercial applications.