Alexander V. Sidorov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Alexander V. Sidorov has a total of 75 co-authors. Here are the top co-authors by number of shared publications:
- Alexander V. Vodopyanov
Institute of Applied Physics, Russian Academy of Sciences, Nizhny Novgorod, Russia
10 shared publications - I. V. Izotov
Ion sources lab, IAP RAS, 46 Ul'yanova Street, Nizhny Novgorod, 603950, RUSSIAN FEDERATION
5 shared publications - Mikhail Yu. Glyavin
Institute of Applied Physics of the Russian Academy of Sciences, Nizhny Novgorod, Russia
5 shared publications - Vadim A. Skalyga
Institute of Applied Physics, Russian Academy of Sciences, 603950 Nizhny Novgorod, Russia
5 shared publications - Alexey P. Veselov
A.V. Gaponov-Grekhov Institute of Applied Physics of the Russian Academy of Sciences Federal Research Center , Nizhny Novgorod
4 shared publications - Sergey V. Razin
Federal Research Center A.V. Gaponov-Grekhov Institute of Applied Physics of the Russian Academy of Sciences (IAP RAS) 1 , 603950 Nizhny Novgorod
4 shared publications
Latest Publications
- 1 October 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (10)
Parameters of the shock wave generated by laser-induced discharge in argon
The article presents the results of measuring the distribution of neutral particle concentration in a shock wave formed by a discharge initiated by pulsed laser radiation. The parameters of heating radiation were as follows: wavelength 10.6 μm, pulse duration 100 ns, and energy per pulse up to 1.1 J. Another laser with a wavelength of 632.8 nm was chosen as a light source for a Michelson interferometer designed for phase shift measurements caused by gas disturbance. It was found that with these parameters of the infrared laser spark in argon, an eightfold compression of the gas at the shock wave front is achieved.
- 1 October 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (10)
Parameters of the shock wave generated by laser-induced discharge in argon
The article presents the results of measuring the distribution of neutral particle concentration in a shock wave formed by a discharge initiated by pulsed laser radiation. The parameters of heating radiation were as follows: wavelength 10.6 μm, pulse duration 100 ns, and energy per pulse up to 1.1 J. Another laser with a wavelength of 632.8 nm was chosen as a light source for a Michelson interferometer designed for phase shift measurements caused by gas disturbance. It was found that with these parameters of the infrared laser spark in argon, an eightfold compression of the gas at the shock wave front is achieved.
- Open Access
- 1 June 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (6)
Study of plasmoids parameters formed in a sub-terahertz discharge at atmospheric pressure
This paper presents a study of the parameters of plasmoids forming a plasma torch and propagating toward continuous sub-terahertz radiation (263 GHz) in a hybrid plasmatron that integrates elements of waveguide and quasi-optical systems. The experimentally obtained dependencies and characteristic velocity values are consistent with the thermal conductivity mechanism of freely localized discharge propagation. The spatial distribution of electron density in the plasma torch was measured. The work also discusses approaches to control the plasmoid propagation.
- 1 June 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (6)
Open AccessStudy of plasmoids parameters formed in a sub-terahertz discharge at atmospheric pressure
This paper presents a study of the parameters of plasmoids forming a plasma torch and propagating toward continuous sub-terahertz radiation (263 GHz) in a hybrid plasmatron that integrates elements of waveguide and quasi-optical systems. The experimentally obtained dependencies and characteristic velocity values are consistent with the thermal conductivity mechanism of freely localized discharge propagation. The spatial distribution of electron density in the plasma torch was measured. The work also discusses approaches to control the plasmoid propagation.
- 21 April 2025
- Published by Federal Research Center for Information and Computational Technologies in Вычислительные технологии
- Vol. 30 (2) , 5-18
Численное моделирование взаимодействия электромагнитного излучения с плавно-неоднородной плазмой
Работа посвящена численному моделированию особенностей взаимодействия электромагнитного излучения с пространственно-неоднородной плазмой при наличии области плазменного резонанса в случае низкой частоты столкновения электронов. Цели работы — поиск оперативного способа верификации результатов численных расчетов, а также поиск эффективных (быстрых) методов расчета, позволяющих получить достоверные и непротиворечивые результаты при использовании относительно грубой пространственной сетки. The research addresses numerical modelling for the process of the interaction of electromagnetic radiation with a spatially inhomogeneous plasma in the case of low frequency of electron collisions when there is a plasma resonance region. In order to compare the numerical results with analytical predictions, it was decided to simulate the linear problem of the incidence of an electromagnetic beam at a given angle onto a given smoothly inhomogeneous plasma layer. The simulation was carried out using the widely used FDTD method, which consists of directly solving Maxwell’s equations on a cross spatial grid. The influence of plasma was taken into account within the Drude model. A feature of this model is the use of a pulse source with a diagnostic pulse duration of about 5 periods of the central frequency. The computations has demonstrated the presence of numerical artifacts, which can serve as an unambiguous criterion for the unreliability of the simulation results. According to theoretical predictions, plasma oscillations cannot transform back into electromagnetic waves. So the time dependence of the reflected power should show one single pulse, corresponding to the partial reflection of the incident pulse from the plasma. However, calculations have shown that after some rather long time period after the first reflected pulse, additional pulses are observed in a number of cases. It happened due to the repeated emission of energy stored in the plasma in the form of plasma oscillations, called as “plasma echo”. Detailed studies have shown that echo pulses arise as a result of replacing the smooth plasma profile with a stepwise approximation. In our opinion, “plasma echo” pulses are not the effect of numerical procedure. To experimentally observe this effect, several rather exotic conditions must be met simultaneously. For the case of a smoothly inhomogeneous plasma, “plasma echo” is a parasitic effect. The paper proposes two cost-effective methods to reduce the influence of this parasitic effect without significantly slowing down the speed of calculations.
- 21 April 2025
- Published by Federal Research Center for Information and Computational Technologies in Вычислительные технологии
- Vol. 30 (2) , 5-18
Численное моделирование взаимодействия электромагнитного излучения с плавно-неоднородной плазмой
Работа посвящена численному моделированию особенностей взаимодействия электромагнитного излучения с пространственно-неоднородной плазмой при наличии области плазменного резонанса в случае низкой частоты столкновения электронов. Цели работы — поиск оперативного способа верификации результатов численных расчетов, а также поиск эффективных (быстрых) методов расчета, позволяющих получить достоверные и непротиворечивые результаты при использовании относительно грубой пространственной сетки. The research addresses numerical modelling for the process of the interaction of electromagnetic radiation with a spatially inhomogeneous plasma in the case of low frequency of electron collisions when there is a plasma resonance region. In order to compare the numerical results with analytical predictions, it was decided to simulate the linear problem of the incidence of an electromagnetic beam at a given angle onto a given smoothly inhomogeneous plasma layer. The simulation was carried out using the widely used FDTD method, which consists of directly solving Maxwell’s equations on a cross spatial grid. The influence of plasma was taken into account within the Drude model. A feature of this model is the use of a pulse source with a diagnostic pulse duration of about 5 periods of the central frequency. The computations has demonstrated the presence of numerical artifacts, which can serve as an unambiguous criterion for the unreliability of the simulation results. According to theoretical predictions, plasma oscillations cannot transform back into electromagnetic waves. So the time dependence of the reflected power should show one single pulse, corresponding to the partial reflection of the incident pulse from the plasma. However, calculations have shown that after some rather long time period after the first reflected pulse, additional pulses are observed in a number of cases. It happened due to the repeated emission of energy stored in the plasma in the form of plasma oscillations, called as “plasma echo”. Detailed studies have shown that echo pulses arise as a result of replacing the smooth plasma profile with a stepwise approximation. In our opinion, “plasma echo” pulses are not the effect of numerical procedure. To experimentally observe this effect, several rather exotic conditions must be met simultaneously. For the case of a smoothly inhomogeneous plasma, “plasma echo” is a parasitic effect. The paper proposes two cost-effective methods to reduce the influence of this parasitic effect without significantly slowing down the speed of calculations.
- 28 November 2023
- Published by Allerton Press in Bulletin of the Russian Academy of Sciences: Physics
- Vol. 87 (11) , 1746-1750
Discharge in a Nonhomogeneous Gas Flow Sustained by Powerful Novosibirsk Free Electron Laser Emission as a Point-Like Source of Vacuum Ultraviolet Radiation
We consider the prospect of development a point-like source of vacuum ultraviolet radiation based on a plasma discharge sustained by terahertz radiation fr
- 28 November 2023
- Published by Allerton Press in Bulletin of the Russian Academy of Sciences: Physics
- Vol. 87 (11) , 1746-1750
Discharge in a Nonhomogeneous Gas Flow Sustained by Powerful Novosibirsk Free Electron Laser Emission as a Point-Like Source of Vacuum Ultraviolet Radiation
We consider the prospect of development a point-like source of vacuum ultraviolet radiation based on a plasma discharge sustained by terahertz radiation fr
- 1 May 2023
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 32 (5) , 055004
Point-like plasma-limited high-temperature terahertz laser discharge
Various methods for limiting the plasma volume made it possible to produce a continuous point-like high-temperature terahertz discharge at the Novosibirsk free-electron laser (NovoFEL). When a krypton-nitrogen jet was injected into the focus of the NovoFEL radiation, as compressed as possible and having an average power of about 200 W, a spherical plasma with a diameter of 1 mm, temperature of 4–4.5 eV (46 000–52 000 K), and density of 3.5 × 1017 cm−3 was obtained. The ion composition of the plasma is represented mainly by triply and doubly ionized krypton atoms (Kr IV and Kr III). The absolute stability of the plasma, which tends to self-oscillate, is achieved through the use of a special negative optical feedback.
- 1 May 2023
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 32 (5) , 055004
Point-like plasma-limited high-temperature terahertz laser discharge
Various methods for limiting the plasma volume made it possible to produce a continuous point-like high-temperature terahertz discharge at the Novosibirsk free-electron laser (NovoFEL). When a krypton-nitrogen jet was injected into the focus of the NovoFEL radiation, as compressed as possible and having an average power of about 200 W, a spherical plasma with a diameter of 1 mm, temperature of 4–4.5 eV (46 000–52 000 K), and density of 3.5 × 1017 cm−3 was obtained. The ion composition of the plasma is represented mainly by triply and doubly ionized krypton atoms (Kr IV and Kr III). The absolute stability of the plasma, which tends to self-oscillate, is achieved through the use of a special negative optical feedback.
- 1 January 2023
- Published by Ioffe Institute Russian Academy of Sciences in Technical Physics Letters
- Vol. 49 (2) , 14
Features of the breakdown in heavy noble gases under the action of Novosibirsk free electron laser radiation
The results of experimental studies on the breakdown of noble gases (argon and krypton) by terahertz radiation from the Novosibirsk free electron laser (NovoFEL) are presented. For the first time, the breakdown thresholds of noble gases by terahertz radiation were measured in a wide pressure range (0.2-1.5 bar). Previous experiments to measure breakdown thresholds in the THz range in various gases were carried out for hundreds of GHz or at atmospheric pressure. Experimental breakdown thresholds are compared with calculated data using various simplified models. Keywords: THz radiation, gas breakdown, THz laser discharge.
- 1 January 2023
- Published by Ioffe Institute Russian Academy of Sciences in Technical Physics Letters
- Vol. 49 (2) , 14
Features of the breakdown in heavy noble gases under the action of Novosibirsk free electron laser radiation
The results of experimental studies on the breakdown of noble gases (argon and krypton) by terahertz radiation from the Novosibirsk free electron laser (NovoFEL) are presented. For the first time, the breakdown thresholds of noble gases by terahertz radiation were measured in a wide pressure range (0.2-1.5 bar). Previous experiments to measure breakdown thresholds in the THz range in various gases were carried out for hundreds of GHz or at atmospheric pressure. Experimental breakdown thresholds are compared with calculated data using various simplified models. Keywords: THz radiation, gas breakdown, THz laser discharge.
- Open Access
- 1 January 2023
- Published by Ioffe Institute Russian Academy of Sciences in Письма в журнал технической физики
- Vol. 49 (6) , 35
Пробой тяжелых инертных газов импульсом электромагнитного излучения гиротрона частотой 1 THz
Пробой тяжелых инертных газов импульсом электромагнитного излучения гиротрона частотой 1 THz
- 1 January 2023
- Published by Ioffe Institute Russian Academy of Sciences in Письма в журнал технической физики
- Vol. 49 (6) , 35
Open AccessПробой тяжелых инертных газов импульсом электромагнитного излучения гиротрона частотой 1 THz
Пробой тяжелых инертных газов импульсом электромагнитного излучения гиротрона частотой 1 THz
- 4 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 13 (1) , 3-9
Study of THz Gas Discharge Spatial Dynamic in Argon
A compact interferometer was developed and created for studying the spatial-temporal dynamic of a terahertz discharge in argon. It has been shown that the plasma density exceeds the cut-off value for the given frequency of radiation sustaining the discharge. The paper discusses issues of neutrals displacement from the discharge region and investigates the dynamic of displaced particles in a wide range of background pressures. A gyrotron with a maximum pulse power of 40 kW at a frequency of 0.67 THz with a pulse duration of 20 s was used to create a gas discharge.
- 4 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 13 (1) , 3-9
Study of THz Gas Discharge Spatial Dynamic in Argon
A compact interferometer was developed and created for studying the spatial-temporal dynamic of a terahertz discharge in argon. It has been shown that the plasma density exceeds the cut-off value for the given frequency of radiation sustaining the discharge. The paper discusses issues of neutrals displacement from the discharge region and investigates the dynamic of displaced particles in a wide range of background pressures. A gyrotron with a maximum pulse power of 40 kW at a frequency of 0.67 THz with a pulse duration of 20 s was used to create a gas discharge.
- 29 March 2022
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 55 (29) , 293001
Terahertz gas discharge: current progress and possible applications
Plasma created in focused beams of electromagnetic waves in the terahertz frequency range is a fairly new object in gas discharge physics. The specified range, located between the microwave and infrared regions of the spectrum of electromagnetic waves, is currently being actively developed. However, until recently, the study of discharge phenomena in it was practically inaccessible. Recent advances in its development are associated primarily with the creation of powerful sources of terahertz radiation—gyrotrons and free electron lasers. This article presents an overview of the latest results of studies of a gaseous terahertz discharge: gas breakdown, discharge propagation, features of the discharge glow, and prospects for a gaseous terahertz discharge as a point source of UV radiation.
- 29 March 2022
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 55 (29) , 293001
Terahertz gas discharge: current progress and possible applications
Plasma created in focused beams of electromagnetic waves in the terahertz frequency range is a fairly new object in gas discharge physics. The specified range, located between the microwave and infrared regions of the spectrum of electromagnetic waves, is currently being actively developed. However, until recently, the study of discharge phenomena in it was practically inaccessible. Recent advances in its development are associated primarily with the creation of powerful sources of terahertz radiation—gyrotrons and free electron lasers. This article presents an overview of the latest results of studies of a gaseous terahertz discharge: gas breakdown, discharge propagation, features of the discharge glow, and prospects for a gaseous terahertz discharge as a point source of UV radiation.
- 1 March 2022
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 93 (3) , 033502
Gasdynamic electron cyclotron ion sources: Basic physics, applications, and diagnostic techniques
The gasdynamic electron cyclotron resonance (ECR) ion source is a type of the device in which the ionization efficiency is achieved primarily due to a high plasma density. Because of a high particle collision rate, the confinement is determined by a gasdynamic plasma outflow from a magnetic trap. Due to high efficiency of resonant heating, electrons gain energy significantly higher than that in inductively or capacitively coupled plasmas. As a consequence of such a parameter combination, the gasdynamic ECR plasma can be a unique source of low to medium charged ions, providing a high current and an ultimate quality of an ion beam. One of the most demanded directions of its application today is a development of high-current proton injectors for modern accelerators and neutron sources of different intensities. Special plasma parameters allow for the use of diagnostic techniques, traditional for multiply charged ECR plasmas as well as for other types of discharges with a high plasma density. Among the additional techniques, one can mention the methods of numerical simulation and reconstruction of the plasma density and temperature from the parameters of the extracted ion beams. Another point is that the high plasma density makes it possible to measure it from the Stark broadening of hydrogen lines by spectroscopy of plasma emission in the visible range, which is a fairly convenient non-invasive diagnostic method. The present paper discusses the main physical aspects of the gasdynamic ECR plasma, suitable diagnostic techniques, and possibilities and future prospects for its various applications.
- 1 March 2022
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 93 (3) , 033502
Gasdynamic electron cyclotron ion sources: Basic physics, applications, and diagnostic techniques
The gasdynamic electron cyclotron resonance (ECR) ion source is a type of the device in which the ionization efficiency is achieved primarily due to a high plasma density. Because of a high particle collision rate, the confinement is determined by a gasdynamic plasma outflow from a magnetic trap. Due to high efficiency of resonant heating, electrons gain energy significantly higher than that in inductively or capacitively coupled plasmas. As a consequence of such a parameter combination, the gasdynamic ECR plasma can be a unique source of low to medium charged ions, providing a high current and an ultimate quality of an ion beam. One of the most demanded directions of its application today is a development of high-current proton injectors for modern accelerators and neutron sources of different intensities. Special plasma parameters allow for the use of diagnostic techniques, traditional for multiply charged ECR plasmas as well as for other types of discharges with a high plasma density. Among the additional techniques, one can mention the methods of numerical simulation and reconstruction of the plasma density and temperature from the parameters of the extracted ion beams. Another point is that the high plasma density makes it possible to measure it from the Stark broadening of hydrogen lines by spectroscopy of plasma emission in the visible range, which is a fairly convenient non-invasive diagnostic method. The present paper discusses the main physical aspects of the gasdynamic ECR plasma, suitable diagnostic techniques, and possibilities and future prospects for its various applications.