Nina S. Ponomarenko
Nina S. Ponomarenko has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- David M. Tiede
Argonne National Laboratory
6 shared publications - Oleksandr Kokhan
Department of Chemistry and Biochemistry, James Madison University, Harrisonburg, VA 22807, USA
3 shared publications - Cheryl A. Kerfeld
Michigan State University
2 shared publications - Corie Y. Ralston
Molecular Foundry Division, Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, CA 94720, USA
2 shared publications Friedhelm Lendzian
Technical University of Berlin, D-10623 Berlin, Germany
2 shared publications- James R. Norris
Statistical Laboratory, University of Cambridge, Centre for Mathematical Sciences, Cambridge, UK
2 shared publications
Latest Publications
- 27 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 8 (3) , 2090-2103
Structure Characterization of Bacterial Microcompartment Shells via X-ray Scattering and Coordinate Modeling: Evidence for Adventitious Capture of Cytoplasmic Proteins
Bacterial microcompartments (BMCs) are self-assembling protein shell structures that are widely investigated across a broad range of biological and abiotic chemistry applications. A central challenge in BMC research is the targeted capture of enzymes during shell assembly. While crystallography and cryo-EM techniques have been successful in determining BMC shell structures, there has been only limited success in visualizing the location of BMC-captured enzyme cargo. Here, we demonstrate the opportunity to use small-angle X-ray scattering (SAXS) and pair distance distribution function (PDDF) measurements combined with quantitative comparison to coordinate structure models as an approach to characterize BMC shell structures in solution conditions directly relevant to biochemical function. Using this approach, we analyzed BMC shells from Haliangium ochraceum (HO) that were isolated following expression in E. coli. The analysis allowed the BMC shell structures and the extent of encapsulated enzyme cargo to be identified. Notably, the results demonstrate that HO-BMC shells adventitiously capture significant amounts of cytoplasmic cargo during assembly in E. coli. Our findings highlight the utility of SAXS/PDDF analysis for evaluating BMC architectures and enzyme encapsulation, offering valuable insights for designing BMC shells as platforms for biological and abiotic catalyst capture within confined environments.
- 27 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 8 (3) , 2090-2103
Structure Characterization of Bacterial Microcompartment Shells via X-ray Scattering and Coordinate Modeling: Evidence for Adventitious Capture of Cytoplasmic Proteins
Bacterial microcompartments (BMCs) are self-assembling protein shell structures that are widely investigated across a broad range of biological and abiotic chemistry applications. A central challenge in BMC research is the targeted capture of enzymes during shell assembly. While crystallography and cryo-EM techniques have been successful in determining BMC shell structures, there has been only limited success in visualizing the location of BMC-captured enzyme cargo. Here, we demonstrate the opportunity to use small-angle X-ray scattering (SAXS) and pair distance distribution function (PDDF) measurements combined with quantitative comparison to coordinate structure models as an approach to characterize BMC shell structures in solution conditions directly relevant to biochemical function. Using this approach, we analyzed BMC shells from Haliangium ochraceum (HO) that were isolated following expression in E. coli. The analysis allowed the BMC shell structures and the extent of encapsulated enzyme cargo to be identified. Notably, the results demonstrate that HO-BMC shells adventitiously capture significant amounts of cytoplasmic cargo during assembly in E. coli. Our findings highlight the utility of SAXS/PDDF analysis for evaluating BMC architectures and enzyme encapsulation, offering valuable insights for designing BMC shells as platforms for biological and abiotic catalyst capture within confined environments.
- 23 January 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (4) , 4170-4185
Structural Characterization of the Platinum Nanoparticle Hydrogen-Evolving Catalyst Assembled on Photosystem I by Light-Driven Chemistry
Directed assembly of abiotic catalysts onto biological redox protein frameworks is of interest as an approach for the synthesis of biohybrid catalysts that combine features of both synthetic and biological materials. In this report, we provide a multiscale characterization of the platinum nanoparticle (NP) hydrogen-evolving catalysts that are assembled by light-driven reductive precipitation of platinum from an aqueous salt solution onto the photosystem I protein (PSI), isolated from cyanobacteria as trimeric PSI. The resulting PSI-NP assemblies were analyzed using a combination of X-ray energy-dispersive spectroscopy (XEDS), high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), small-angle X-ray scattering (SAXS), and high-energy X-ray scattering with atomic pair distribution function (PDF) analyses. The results show that the PSI-supported NPs are approximately 1.8 nm diameter disk-shaped particles that assemble at discrete sites with 145 Å separation. This separation is too large to be consistent with NP nucleation and growth at a site adjacent to the FB cofactor site. Instead, we suggest a mechanism for NP growth at hydrophobic sites on the PSI stromal surface. The NPs photoreductively assembled on the PSI stromal surface are found to be analogous to the nanostructures produced by successive cycles of atomic layer deposition (ALD) of platinum onto 40 nm porous anodic alumina oxide supports, although the mechanisms for nucleation appear to differ. This work establishes a foundation for the investigation of the reductive assembly of abiotic metal catalysts at sites connected to photochemically reducing equivalent production in PSI.
- 23 January 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (4) , 4170-4185
Structural Characterization of the Platinum Nanoparticle Hydrogen-Evolving Catalyst Assembled on Photosystem I by Light-Driven Chemistry
Directed assembly of abiotic catalysts onto biological redox protein frameworks is of interest as an approach for the synthesis of biohybrid catalysts that combine features of both synthetic and biological materials. In this report, we provide a multiscale characterization of the platinum nanoparticle (NP) hydrogen-evolving catalysts that are assembled by light-driven reductive precipitation of platinum from an aqueous salt solution onto the photosystem I protein (PSI), isolated from cyanobacteria as trimeric PSI. The resulting PSI-NP assemblies were analyzed using a combination of X-ray energy-dispersive spectroscopy (XEDS), high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), small-angle X-ray scattering (SAXS), and high-energy X-ray scattering with atomic pair distribution function (PDF) analyses. The results show that the PSI-supported NPs are approximately 1.8 nm diameter disk-shaped particles that assemble at discrete sites with 145 Å separation. This separation is too large to be consistent with NP nucleation and growth at a site adjacent to the FB cofactor site. Instead, we suggest a mechanism for NP growth at hydrophobic sites on the PSI stromal surface. The NPs photoreductively assembled on the PSI stromal surface are found to be analogous to the nanostructures produced by successive cycles of atomic layer deposition (ALD) of platinum onto 40 nm porous anodic alumina oxide supports, although the mechanisms for nucleation appear to differ. This work establishes a foundation for the investigation of the reductive assembly of abiotic metal catalysts at sites connected to photochemically reducing equivalent production in PSI.
- Open Access
Structure Characterization of Bacterial Microcompartment Shells via X-ray Scattering and Coordinate Modeling: Evidence for adventitious capture of cytoplasmic proteins
Bacterial microcompartments (BMCs) are self-assembling, protein shell structures that are widely investigated across a broad range of biological and abiotic chemistry applications. A central challenge in BMC research is the targeted capture of enzymes during shell assembly. While crystallography and cryo-EM techniques have been successful in determining BMC shell structures, there has been only limited success in visualizing the location of BMC-captured enzyme cargo. Here, we demonstrate the opportunity to use small angle X-ray scattering (SAXS) and pair density distribution function (PDDF) measurements combined with quantitative comparison to coordinate structure models as an approach to characterize BMC shell structures in solution conditions directly relevant to biochemical function. Using this approach, we analyzed BMC shells from Haliangium ochraceum that were isolated following expression in E. coli . The analysis allowed BMC shell structures and the extent of encapsulated enzyme cargo to be identified. Notably, the results demonstrate that HO-BMC shells adventitiously capture significant amounts of cytoplasmic cargo during assembly in E. coli . Our findings highlight the utility of SAXS/PDDF analysis for evaluating BMC architectures and enzyme encapsulation, offering valuable insights for designing BMC shells as platforms for biological and abiotic catalyst capture within confined environments.
Open AccessStructure Characterization of Bacterial Microcompartment Shells via X-ray Scattering and Coordinate Modeling: Evidence for adventitious capture of cytoplasmic proteins
Bacterial microcompartments (BMCs) are self-assembling, protein shell structures that are widely investigated across a broad range of biological and abiotic chemistry applications. A central challenge in BMC research is the targeted capture of enzymes during shell assembly. While crystallography and cryo-EM techniques have been successful in determining BMC shell structures, there has been only limited success in visualizing the location of BMC-captured enzyme cargo. Here, we demonstrate the opportunity to use small angle X-ray scattering (SAXS) and pair density distribution function (PDDF) measurements combined with quantitative comparison to coordinate structure models as an approach to characterize BMC shell structures in solution conditions directly relevant to biochemical function. Using this approach, we analyzed BMC shells from Haliangium ochraceum that were isolated following expression in E. coli . The analysis allowed BMC shell structures and the extent of encapsulated enzyme cargo to be identified. Notably, the results demonstrate that HO-BMC shells adventitiously capture significant amounts of cytoplasmic cargo during assembly in E. coli . Our findings highlight the utility of SAXS/PDDF analysis for evaluating BMC architectures and enzyme encapsulation, offering valuable insights for designing BMC shells as platforms for biological and abiotic catalyst capture within confined environments.
- Open Access
- 28 October 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (11) , 2143
Mimicking Natural Photosynthesis: Designing Ultrafast Photosensitized Electron Transfer into Multiheme Cytochrome Protein Nanowires
Efficient nanomaterials for artificial photosynthesis require fast and robust unidirectional electron transfer (ET) from photosensitizers through charge-separation and accumulation units to redox-active catalytic sites. We explored the ultrafast time-scale limits of photo-induced charge transfer between a Ru(II)tris(bipyridine) derivative photosensitizer and PpcA, a 3-heme c-type cytochrome serving as a nanoscale biological wire. Four covalent attachment sites (K28C, K29C, K52C, and G53C) were engineered in PpcA enabling site-specific covalent labeling with expected donor-acceptor (DA) distances of 4–8 Å. X-ray scattering results demonstrated that mutations and chemical labeling did not disrupt the structure of the proteins. Time-resolved spectroscopy revealed three orders of magnitude difference in charge transfer rates for the systems with otherwise similar DA distances and the same number of covalent bonds separating donors and acceptors. All-atom molecular dynamics simulations provided additional insight into the structure-function requirements for ultrafast charge transfer and the requirement of van der Waals contact between aromatic atoms of photosensitizers and hemes in order to observe sub-nanosecond ET. This work demonstrates opportunities to utilize multi-heme c-cytochromes as frameworks for designing ultrafast light-driven ET into charge-accumulating biohybrid model systems, and ultimately for mimicking the photosynthetic paradigm of efficiently coupling ultrafast, light-driven electron transfer chemistry to multi-step catalysis within small, experimentally versatile photosynthetic biohybrid assemblies.
- 28 October 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (11) , 2143
Open AccessMimicking Natural Photosynthesis: Designing Ultrafast Photosensitized Electron Transfer into Multiheme Cytochrome Protein Nanowires
Efficient nanomaterials for artificial photosynthesis require fast and robust unidirectional electron transfer (ET) from photosensitizers through charge-separation and accumulation units to redox-active catalytic sites. We explored the ultrafast time-scale limits of photo-induced charge transfer between a Ru(II)tris(bipyridine) derivative photosensitizer and PpcA, a 3-heme c-type cytochrome serving as a nanoscale biological wire. Four covalent attachment sites (K28C, K29C, K52C, and G53C) were engineered in PpcA enabling site-specific covalent labeling with expected donor-acceptor (DA) distances of 4–8 Å. X-ray scattering results demonstrated that mutations and chemical labeling did not disrupt the structure of the proteins. Time-resolved spectroscopy revealed three orders of magnitude difference in charge transfer rates for the systems with otherwise similar DA distances and the same number of covalent bonds separating donors and acceptors. All-atom molecular dynamics simulations provided additional insight into the structure-function requirements for ultrafast charge transfer and the requirement of van der Waals contact between aromatic atoms of photosensitizers and hemes in order to observe sub-nanosecond ET. This work demonstrates opportunities to utilize multi-heme c-cytochromes as frameworks for designing ultrafast light-driven ET into charge-accumulating biohybrid model systems, and ultimately for mimicking the photosynthetic paradigm of efficiently coupling ultrafast, light-driven electron transfer chemistry to multi-step catalysis within small, experimentally versatile photosynthetic biohybrid assemblies.
- Open Access
- 10 January 2020
- Published by Springer Nature in Photosynthesis Research
- Vol. 143 (2) , 99-113
Examination of abiotic cofactor assembly in photosynthetic biomimetics: site-specific stereoselectivity in the conjugation of a ruthenium(II) tris(bipyridine) photosensitizer to a multi-heme protein
To understand design principles for assembling photosynthetic biohybrids that incorporate precisely-controlled sites for electron injection into redox enzyme cofactor arrays, we investigated the influence of chirality in assembly of the photosensitizer ruthenium(II)bis(2,2′-bipyridine)(4-bromomethyl-4′-methyl-2,2′-bipyridine), Ru(bpy)2(Br-bpy), when covalently conjugated to cysteine residues introduced by site-directed mutagenesis in the triheme periplasmic cytochrome A (PpcA) as a model biohybrid system. For two investigated conjugates that show ultrafast electron transfer, A23C-Ru and K29C-Ru, analysis by circular dichroism spectroscopy, CD, demonstrated site-specific chiral discrimination as a factor emerging from the close association between [Ru(bpy)3]2+ and heme cofactors. CD analysis showed the A23C-Ru and K29C-Ru conjugates to have distinct, but opposite, stereoselectivity for the Λ and Δ-Ru(bpy)2(Br-bpy) enantiomers, with enantiomeric excesses of 33.1% and 65.6%, respectively. In contrast, Ru(bpy)2(Br-bpy) conjugation to a protein site with high flexibility, represented by the E39C-Ru construct, exhibited a nearly negligible chiral selectivity, measured by an enantiomeric excess of 4.2% for the Λ enantiomer. Molecular dynamics simulations showed that site-specific stereoselectivity reflects steric constraints at the conjugating sites and that a high degree of chiral selectivity correlates to reduced structural disorder for [Ru(bpy)3]2+ in the linked assembly. This work identifies chiral discrimination as means to achieve site-specific, precise geometric positioning of introduced photosensitizers relative to the heme cofactors in manner that mimics the tuning of cofactors in photosynthesis.
- 10 January 2020
- Published by Springer Nature in Photosynthesis Research
- Vol. 143 (2) , 99-113
Open AccessExamination of abiotic cofactor assembly in photosynthetic biomimetics: site-specific stereoselectivity in the conjugation of a ruthenium(II) tris(bipyridine) photosensitizer to a multi-heme protein
To understand design principles for assembling photosynthetic biohybrids that incorporate precisely-controlled sites for electron injection into redox enzyme cofactor arrays, we investigated the influence of chirality in assembly of the photosensitizer ruthenium(II)bis(2,2′-bipyridine)(4-bromomethyl-4′-methyl-2,2′-bipyridine), Ru(bpy)2(Br-bpy), when covalently conjugated to cysteine residues introduced by site-directed mutagenesis in the triheme periplasmic cytochrome A (PpcA) as a model biohybrid system. For two investigated conjugates that show ultrafast electron transfer, A23C-Ru and K29C-Ru, analysis by circular dichroism spectroscopy, CD, demonstrated site-specific chiral discrimination as a factor emerging from the close association between [Ru(bpy)3]2+ and heme cofactors. CD analysis showed the A23C-Ru and K29C-Ru conjugates to have distinct, but opposite, stereoselectivity for the Λ and Δ-Ru(bpy)2(Br-bpy) enantiomers, with enantiomeric excesses of 33.1% and 65.6%, respectively. In contrast, Ru(bpy)2(Br-bpy) conjugation to a protein site with high flexibility, represented by the E39C-Ru construct, exhibited a nearly negligible chiral selectivity, measured by an enantiomeric excess of 4.2% for the Λ enantiomer. Molecular dynamics simulations showed that site-specific stereoselectivity reflects steric constraints at the conjugating sites and that a high degree of chiral selectivity correlates to reduced structural disorder for [Ru(bpy)3]2+ in the linked assembly. This work identifies chiral discrimination as means to achieve site-specific, precise geometric positioning of introduced photosensitizers relative to the heme cofactors in manner that mimics the tuning of cofactors in photosynthesis.
- 3 January 2018
- Published by American Chemical Society (ACS) in Biochemistry
- Vol. 57 (11) , 1722-1732
Electron Paramagnetic Resonance Characterization of the Triheme Cytochrome from Geobacter sulfurreducens
Periplasmic cytochrome A (PpcA) is a representative of a broad class of multi-heme cytochromes functioning as protein “nanowires” for storage and extracellular transfer of multiple electrons in the δ-proteobacterium Geobacter sulfurreducens. PpcA contains three bis-His coordinated hemes held in a spatial arrangement that is highly conserved among the multi-heme cytochromes c3 and c7 families, carries low potential hemes and is notable for having one of the lowest number of amino acids utilized to maintain a characteristic protein fold and site specific heme function. Low temperature X-band EPR spectroscopy has been used to characterize the electronic configuration of the Fe(III) and the ligation mode for each heme. The three sets of EPR signals are assigned to individual hemes in the 3D crystal structure. The relative energy levels of the Fe(III) 3d orbitals for individual hemes was estimated from the principal g values. The observed g tensor anisotropy was used as a probe of electronic structure of each heme and differences were determined by specifics of axial ligation. To ensure unambiguous assignment of highly anisotropic low spin (HALS) signal to individual hemes, EPR analyses of iron atom electronic configurations have been supplemented with investigation of porphyrin macrocycles by 1D 1H NMR chemical shift patterns for the methyl substituents. Within optimized geometry of hemes in PpcA the magnetic interactions between hemes were found to be minimal, similar to c3 family of tetraheme cytochromes.
- 3 January 2018
- Published by American Chemical Society (ACS) in Biochemistry
- Vol. 57 (11) , 1722-1732
Electron Paramagnetic Resonance Characterization of the Triheme Cytochrome from Geobacter sulfurreducens
Periplasmic cytochrome A (PpcA) is a representative of a broad class of multi-heme cytochromes functioning as protein “nanowires” for storage and extracellular transfer of multiple electrons in the δ-proteobacterium Geobacter sulfurreducens. PpcA contains three bis-His coordinated hemes held in a spatial arrangement that is highly conserved among the multi-heme cytochromes c3 and c7 families, carries low potential hemes and is notable for having one of the lowest number of amino acids utilized to maintain a characteristic protein fold and site specific heme function. Low temperature X-band EPR spectroscopy has been used to characterize the electronic configuration of the Fe(III) and the ligation mode for each heme. The three sets of EPR signals are assigned to individual hemes in the 3D crystal structure. The relative energy levels of the Fe(III) 3d orbitals for individual hemes was estimated from the principal g values. The observed g tensor anisotropy was used as a probe of electronic structure of each heme and differences were determined by specifics of axial ligation. To ensure unambiguous assignment of highly anisotropic low spin (HALS) signal to individual hemes, EPR analyses of iron atom electronic configurations have been supplemented with investigation of porphyrin macrocycles by 1D 1H NMR chemical shift patterns for the methyl substituents. Within optimized geometry of hemes in PpcA the magnetic interactions between hemes were found to be minimal, similar to c3 family of tetraheme cytochromes.
- 28 July 2014
- Published by American Chemical Society (ACS) in Biochemistry
- Vol. 53 (31) , 5070-5079
Multimerization of Solution-State Proteins by Tetrakis(4-sulfonatophenyl)porphyrin
Surface binding and interactions of anionic porphyins bound to cationic proteins have been studied for nearly three decades and are relevant as models for protein surface molecular recognition and photoinitiated electron transfer. However, interpretation of data in nearly all reports explicitly or implicitly assumed interaction of porphyrin with monodisperse proteins in solutions. In this report, using small-angle X-ray scattering with solution phase samples, we demonstrate that horse heart cytochrome (cyt) c, triheme cytochrome c7 PpcA from Geobacter sulfurreducens, and hen egg lysozyme multimerize in the presence of zinc tetrakis(4-sulfonatophenyl)porphyrin (ZnTPPS). Multimerization of cyt c showed a pH dependence with a stronger apparent binding affinity under alkaline conditions and was weakened in the presence of a high salt concentration. Ferric-cyt c formed complexes larger than those formed by ferro-cyt c. Free base TPPS and FeTPPS facilitated formation of complexes larger than those of ZnTPPS. No increase in protein aggregation state for cationic proteins was observed in the presence of cationic porphyrins. All-atom molecular dynamics simulations of cyt c and PpcA with free base TPPS corroborated X-ray scattering results and revealed a mechanism by which the tetrasubstituted charged porphyrins serve as bridging ligands nucleating multimerization of the complementarily charged protein. The final aggregation products suggest that multimerization involves a combination of electrostatic and hydrophobic interactions. The results demonstrate an overlooked complexity in the design of multifunctional ligands for protein surface recognition.
- 28 July 2014
- Published by American Chemical Society (ACS) in Biochemistry
- Vol. 53 (31) , 5070-5079
Multimerization of Solution-State Proteins by Tetrakis(4-sulfonatophenyl)porphyrin
Surface binding and interactions of anionic porphyins bound to cationic proteins have been studied for nearly three decades and are relevant as models for protein surface molecular recognition and photoinitiated electron transfer. However, interpretation of data in nearly all reports explicitly or implicitly assumed interaction of porphyrin with monodisperse proteins in solutions. In this report, using small-angle X-ray scattering with solution phase samples, we demonstrate that horse heart cytochrome (cyt) c, triheme cytochrome c7 PpcA from Geobacter sulfurreducens, and hen egg lysozyme multimerize in the presence of zinc tetrakis(4-sulfonatophenyl)porphyrin (ZnTPPS). Multimerization of cyt c showed a pH dependence with a stronger apparent binding affinity under alkaline conditions and was weakened in the presence of a high salt concentration. Ferric-cyt c formed complexes larger than those formed by ferro-cyt c. Free base TPPS and FeTPPS facilitated formation of complexes larger than those of ZnTPPS. No increase in protein aggregation state for cationic proteins was observed in the presence of cationic porphyrins. All-atom molecular dynamics simulations of cyt c and PpcA with free base TPPS corroborated X-ray scattering results and revealed a mechanism by which the tetrasubstituted charged porphyrins serve as bridging ligands nucleating multimerization of the complementarily charged protein. The final aggregation products suggest that multimerization involves a combination of electrostatic and hydrophobic interactions. The results demonstrate an overlooked complexity in the design of multifunctional ligands for protein surface recognition.
- 12 May 2010
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 1 (11) , 1687-1689
Basic Molecular Unit Involved in Charge Migration in Oxidized Light-Harvesting Complex 1 of Rhodobacter sphaeroides
- 12 May 2010
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 1 (11) , 1687-1689
Basic Molecular Unit Involved in Charge Migration in Oxidized Light-Harvesting Complex 1 of Rhodobacter sphaeroides
- 21 April 2010
- Published by Wiley in Chemphyschem
- Vol. 11 (6) , 1258-1264
ENDOR Study of Charge Migration in Photosynthetic Arrays of Rhodobacter sphaeroides
The chemistry of bacterial photosynthesis begins in the photosynthetic reaction centre (RC), a protein complex containing a series of electron donor and acceptor molecules. Although the pigments of the RC can absorb light to operate the photochemistry, the bulk of the light is captured in special pigmented proteins, the light harvesting complexes (LHCs), that then transfer the energy to the RC. Ordinarily, the LHCs do not participate in chemical reactions during photosynthesis such that LHCs do not become oxidised upon light irradiation. However, upon chemical oxidation in the dark, cation radicals of bacteriochlorophyll (BChl) can be formed in the light harvesting complex 1 (LH1) of Rhodobacter sphaeroides. As observed by continuous‐wave electron‐paramagnetic resonance (EPR), the charges of the BChl+ cations migrate rather freely about the LH1 complex as in a molecular wire. Remarkably, these LH1 molecular wires continue to function in the frozen, solid state. To investigate the nature of electron–hole transfer and to corroborate the process as revealed by EPR, electron–nuclear double resonance (ENDOR) was recorded at 80 K. ENDOR observed only monomeric bacteriochlorophyll cations. Their signal intensity decreased with increased oxidation while the EPR signal narrowed and increased in size. At the increased oxidation state, the possibility of spin‐spin exchange between two BChl+s within LH1 versus electron–hole transfer is addressed. An energy landscape of the BChl+s in the LH1 is proposed to explain the EPR and ENDOR results.
- 21 April 2010
- Published by Wiley in Chemphyschem
- Vol. 11 (6) , 1258-1264
ENDOR Study of Charge Migration in Photosynthetic Arrays of Rhodobacter sphaeroides
The chemistry of bacterial photosynthesis begins in the photosynthetic reaction centre (RC), a protein complex containing a series of electron donor and acceptor molecules. Although the pigments of the RC can absorb light to operate the photochemistry, the bulk of the light is captured in special pigmented proteins, the light harvesting complexes (LHCs), that then transfer the energy to the RC. Ordinarily, the LHCs do not participate in chemical reactions during photosynthesis such that LHCs do not become oxidised upon light irradiation. However, upon chemical oxidation in the dark, cation radicals of bacteriochlorophyll (BChl) can be formed in the light harvesting complex 1 (LH1) of Rhodobacter sphaeroides. As observed by continuous‐wave electron‐paramagnetic resonance (EPR), the charges of the BChl+ cations migrate rather freely about the LH1 complex as in a molecular wire. Remarkably, these LH1 molecular wires continue to function in the frozen, solid state. To investigate the nature of electron–hole transfer and to corroborate the process as revealed by EPR, electron–nuclear double resonance (ENDOR) was recorded at 80 K. ENDOR observed only monomeric bacteriochlorophyll cations. Their signal intensity decreased with increased oxidation while the EPR signal narrowed and increased in size. At the increased oxidation state, the possibility of spin‐spin exchange between two BChl+s within LH1 versus electron–hole transfer is addressed. An energy landscape of the BChl+s in the LH1 is proposed to explain the EPR and ENDOR results.