Jiguang Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jiguang Zhang has a total of 106 co-authors. Here are the top co-authors by number of shared publications:
- Yunfeng Zhu
College of Materials Science and Engineering, Nanjing Tech University, 30 South Puzhu Road, Nanjing 211816, P. R. China
38 shared publications Rui Shi
College of Materials Science and Engineering, Nanjing Tech University, 30 South Puzhu Road, Nanjing 211816, P. R. China
30 shared publications- Jun Wang
College of Materials Science and Engineering, Nanjing Tech University, 30 South Puzhu Road, Nanjing 211816, P. R. China
20 shared publications Yana Liu
College of Materials Science and Engineering, Nanjing Tech University, 30 South Puzhu Road, Nanjing 211816, PR. China
19 shared publicationsLiquan Li
18 shared publications- Yana Liu
College of Materials Science and Engineering, Nanjing Tech University, 30 South Puzhu Road, Nanjing 211816, P. R. China
18 shared publications
Latest Publications
- 10 November 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (67) , 45927-45940
Amorphous TiZr bimetallic MOFs with in situ formed Ti 3+ sites and oxygen vacancies for enhanced MgH 2 hydrogen storage
In this work, a variety of TiZr bimetallic metal–organic frameworks were synthesized and employed to facilitate the hydrogen storage properties of MgH 2 .
- 10 November 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (67) , 45927-45940
Amorphous TiZr bimetallic MOFs with in situ formed Ti 3+ sites and oxygen vacancies for enhanced MgH 2 hydrogen storage
In this work, a variety of TiZr bimetallic metal–organic frameworks were synthesized and employed to facilitate the hydrogen storage properties of MgH 2 .
- 26 October 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (44) , 20646-20656
An In Situ-Formed Mg3AlNi2/Mg3AlNi2H x Ternary Hydrogen Pump for Rapid and Reversible Hydrogen Storage in Mg–Al–Ni Alloys
Mg90–xAl10Nix (x = 5, 10, 15, 16, 17, 18, 19, and 20) ternary alloys were synthesized by hydriding combustion synthesis (HCS) to improve the de-/hydrogenation performance of MgH2. Among these alloys, Mg71Al10Ni19 shows rapid hydrogen uptake, reaching approximately 97% of its practical capacity within 500 s at 225 °C, and nearly complete dehydrogenation within 600 s at 300 °C. The hydrogenation and dehydrogenation enthalpies of the Mg/MgH2 are reduced from –76.24 and 80.86 kJ/mol to –74.40 and 76.91 kJ/mol, respectively. The pronounced kinetic enhancement is mainly attributed to in situ-formed Mg3AlNi2, which reversibly accommodates and releases hydrogen while retaining structural stability during cycling. Density functional theory (DFT) calculations and deep potential molecular dynamics (DPMD) simulations reveal the favorable formation of Mg3AlNi2Hx, faster H diffusion in Mg3AlNi2 than in Mg2Ni, and weaker H-related electron localization in Mg3AlNi2Hx than in Mg2NiH4. These results support the Mg3AlNi2/Mg3AlNi2Hx couple as a ternary hydrogen pump. Al3Ni2 may further serve as an electron-transfer mediator between Mg3AlNi2 and MgH2, whereas Mg2Ni/Mg2NiH4 provides an additional hydrogen-transfer pathway. These findings provide a rational strategy for designing high-performance Mg-based hydrogen storage materials through the in situ generation of synergistic intermetallic phases.
- 26 October 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (44) , 20646-20656
An In Situ-Formed Mg3AlNi2/Mg3AlNi2H x Ternary Hydrogen Pump for Rapid and Reversible Hydrogen Storage in Mg–Al–Ni Alloys
Mg90–xAl10Nix (x = 5, 10, 15, 16, 17, 18, 19, and 20) ternary alloys were synthesized by hydriding combustion synthesis (HCS) to improve the de-/hydrogenation performance of MgH2. Among these alloys, Mg71Al10Ni19 shows rapid hydrogen uptake, reaching approximately 97% of its practical capacity within 500 s at 225 °C, and nearly complete dehydrogenation within 600 s at 300 °C. The hydrogenation and dehydrogenation enthalpies of the Mg/MgH2 are reduced from –76.24 and 80.86 kJ/mol to –74.40 and 76.91 kJ/mol, respectively. The pronounced kinetic enhancement is mainly attributed to in situ-formed Mg3AlNi2, which reversibly accommodates and releases hydrogen while retaining structural stability during cycling. Density functional theory (DFT) calculations and deep potential molecular dynamics (DPMD) simulations reveal the favorable formation of Mg3AlNi2Hx, faster H diffusion in Mg3AlNi2 than in Mg2Ni, and weaker H-related electron localization in Mg3AlNi2Hx than in Mg2NiH4. These results support the Mg3AlNi2/Mg3AlNi2Hx couple as a ternary hydrogen pump. Al3Ni2 may further serve as an electron-transfer mediator between Mg3AlNi2 and MgH2, whereas Mg2Ni/Mg2NiH4 provides an additional hydrogen-transfer pathway. These findings provide a rational strategy for designing high-performance Mg-based hydrogen storage materials through the in situ generation of synergistic intermetallic phases.
- 1 September 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (52) , 35518-35527
Enhanced hydrogen storage of MgH 2 via spillover-assisted hydrogen transport at an in situ formed MoO 2− x /Mg 2 Ni interface
The Ni-Mo-O catalyst in situ constructs a MoO 2− x , Mo, and Mg 2 Ni/Mg 2 NiH 4 phase, which synergistically enables spillover-assisted hydrogen transport.
- 1 September 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (52) , 35518-35527
Enhanced hydrogen storage of MgH 2 via spillover-assisted hydrogen transport at an in situ formed MoO 2− x /Mg 2 Ni interface
The Ni-Mo-O catalyst in situ constructs a MoO 2− x , Mo, and Mg 2 Ni/Mg 2 NiH 4 phase, which synergistically enables spillover-assisted hydrogen transport.
- Open Access
- 1 May 2026
- Published by KEAI Publishing in Journal of Magnesium and Alloys
- Vol. 20
Ni9S8/Fe5Ni4S8-mediated reversible catalysis: Enhancing the hydrogen storage performance of MgH2 under mild conditions
- 1 May 2026
- Published by KEAI Publishing in Journal of Magnesium and Alloys
- Vol. 20
Open AccessNi9S8/Fe5Ni4S8-mediated reversible catalysis: Enhancing the hydrogen storage performance of MgH2 under mild conditions
- 16 April 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Enhanced “Hydrogen Pump” Effect in Improving the Hydrogen Storage Performance of MgH 2 via the Introduction of a Flower-like NiCu Bimetallic MOF
To overcome the hydrogen storage kinetic limitations of magnesium hydride (MgH2), highly effective NiCu bimetallic MOFs with different Ni/Cu ratios were successfully synthesized and introduced into MgH2. The Ni3Cu1 MOF, featuring a distinctive flower-like structure assembled from thin nanosheets, demonstrates the most remarkable catalytic activity in enhancing the hydrogen storage properties of MgH2. The MgH2-8 wt % Ni3Cu1 MOF composite can initiate hydrogen desorption at 198.50 °C and exhibits a significantly reduced dehydrogenation peak temperature of 285.92 °C, in comparison with that of the ball-milled MgH2 (385.5 °C). This composite can rapidly release 6.18 wt % H2 at 300 °C and absorb 5.32 wt % H2 at 150 °C, both within 500 s. The activation energies for dehydrogenation and hydrogenation are reduced to 66.91 and 33.81 kJ/mol H2, respectively. Furthermore, the MgH2-8 wt % Ni3Cu1 MOF presents a capacity retention rate of 93% after 50 cycles, indicating excellent cycle stability. The enhancement in the hydrogen storage performance is mainly attributed to the following two aspects. The distinctive flower-like Ni3Cu1 MOF possesses a relatively large specific surface area, which provides more uniformly dispersed metal active sites and a larger contact area with MgH2. Moreover, the Mg2Ni(Cu)/Mg2Ni(Cu)H4 phases formed in situ during the initial hydrogen de/absorption cycle act as an enhanced “hydrogen pump” to facilitate the de/hydrogenation process of MgH2/Mg. The enhanced effect can be confirmed by theoretical calculations, which reveal a pronounced interfacial electron transfer (0.54 e–) and a marked elongation of the Mg–H bond (2.85 Å) at the MgH2–Mg2Ni(Cu) interface compared to that of the MgH2–Mg2Ni interface. These findings offer a strategy for the design and preparation of bimetallic MOF catalysts to improve the hydrogen storage properties of Mg-based materials.
- 16 April 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Enhanced “Hydrogen Pump” Effect in Improving the Hydrogen Storage Performance of MgH 2 via the Introduction of a Flower-like NiCu Bimetallic MOF
To overcome the hydrogen storage kinetic limitations of magnesium hydride (MgH2), highly effective NiCu bimetallic MOFs with different Ni/Cu ratios were successfully synthesized and introduced into MgH2. The Ni3Cu1 MOF, featuring a distinctive flower-like structure assembled from thin nanosheets, demonstrates the most remarkable catalytic activity in enhancing the hydrogen storage properties of MgH2. The MgH2-8 wt % Ni3Cu1 MOF composite can initiate hydrogen desorption at 198.50 °C and exhibits a significantly reduced dehydrogenation peak temperature of 285.92 °C, in comparison with that of the ball-milled MgH2 (385.5 °C). This composite can rapidly release 6.18 wt % H2 at 300 °C and absorb 5.32 wt % H2 at 150 °C, both within 500 s. The activation energies for dehydrogenation and hydrogenation are reduced to 66.91 and 33.81 kJ/mol H2, respectively. Furthermore, the MgH2-8 wt % Ni3Cu1 MOF presents a capacity retention rate of 93% after 50 cycles, indicating excellent cycle stability. The enhancement in the hydrogen storage performance is mainly attributed to the following two aspects. The distinctive flower-like Ni3Cu1 MOF possesses a relatively large specific surface area, which provides more uniformly dispersed metal active sites and a larger contact area with MgH2. Moreover, the Mg2Ni(Cu)/Mg2Ni(Cu)H4 phases formed in situ during the initial hydrogen de/absorption cycle act as an enhanced “hydrogen pump” to facilitate the de/hydrogenation process of MgH2/Mg. The enhanced effect can be confirmed by theoretical calculations, which reveal a pronounced interfacial electron transfer (0.54 e–) and a marked elongation of the Mg–H bond (2.85 Å) at the MgH2–Mg2Ni(Cu) interface compared to that of the MgH2–Mg2Ni interface. These findings offer a strategy for the design and preparation of bimetallic MOF catalysts to improve the hydrogen storage properties of Mg-based materials.
- 10 April 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (16) , 7238-7246
Ni-Doped Pd/TiO 2 as a High-Efficiency Nanocatalyst for Hydrogen Storage of Magnesium Hydride
- 10 April 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (16) , 7238-7246
Ni-Doped Pd/TiO 2 as a High-Efficiency Nanocatalyst for Hydrogen Storage of Magnesium Hydride
- 23 March 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (7) , 6699-6707
Regulating Reactive Oxygen Species with H 2 over PdCu/ZnO for Selective Photocatalytic Aerobic Oxidation of Methane to Methanol
- 23 March 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (7) , 6699-6707
Regulating Reactive Oxygen Species with H 2 over PdCu/ZnO for Selective Photocatalytic Aerobic Oxidation of Methane to Methanol
- 2 January 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (2) , 1234-1241
The Synergistic Effect of Ni–Mo–S in Promoting the Hydrogen Storage Performance of Magnesium Hydride
- 2 January 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (2) , 1234-1241
The Synergistic Effect of Ni–Mo–S in Promoting the Hydrogen Storage Performance of Magnesium Hydride
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
Oxygen vacancy engineering of Ni-CeO 2 catalyst: towards highly efficient hydrogen production in magnesium hydrolysis
Ni doping activates lattice oxygen and promotes interfacial electron transfer via oxygen vacancies and Ce 3+ /Ce 4+ redox cycling in CeO 2 .
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
Oxygen vacancy engineering of Ni-CeO 2 catalyst: towards highly efficient hydrogen production in magnesium hydrolysis
Ni doping activates lattice oxygen and promotes interfacial electron transfer via oxygen vacancies and Ce 3+ /Ce 4+ redox cycling in CeO 2 .
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (57) , 14286-14290
Cobalt-iron layered double hydroxides with ligand modification for boosting glycerol electrooxidation assisted hydrogen production
Ligand modified cobalt-iron layered double hydroxides exhibit improved activity and stability for glycerol electrooxidation due to the increased active sites exposure, modulated electronic structures, and stabilized metal sites. Thus, an...
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (57) , 14286-14290
Cobalt-iron layered double hydroxides with ligand modification for boosting glycerol electrooxidation assisted hydrogen production
Ligand modified cobalt-iron layered double hydroxides exhibit improved activity and stability for glycerol electrooxidation due to the increased active sites exposure, modulated electronic structures, and stabilized metal sites. Thus, an...