Wenshou Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Wenshou Wang has a total of 80 co-authors. Here are the top co-authors by number of shared publications:
Yun Zhang
School of Chemistry and Chemical Engineering
17 shared publicationsLuntao Liu
National Engineering Research Center for Colloidal Materials, School of Chemistry and Chemical Engineering, Shandong University, Jinan 250100, P. R. China
11 shared publications- Mei Yan
School of Chemistry and Chemical Engineering, University of Jinan, Jinan, China
10 shared publications - Yadong Yin
Department of Chemistry University of California Riverside California USA
7 shared publications Yao Dou
School of Chemistry and Chemical Engineering, University of Jinan, Jinan 250022, P.R. China
7 shared publicationsJi Feng
Department of Chemistry, University of California, Riverside, CA, 92521, USA
6 shared publications
Latest Publications
- 5 May 2026
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 55 (21) , 8421-8431
Photochromic Bi 2 WO 6 /BiOBr ultrathin nanosheet heterojunctions for the efficient photocatalytic synthesis of imine via toluene and aniline coupling
Bi 2 WO 6 /BiOBr ultrathin nanosheet heterojunctions with photochromic behavior enable photocatalytic C–H oxidation of toluene and subsequent coupling with aniline, achieving 99% imine yield via synergistic charge separation and oxygen activation.
- 5 May 2026
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 55 (21) , 8421-8431
Photochromic Bi 2 WO 6 /BiOBr ultrathin nanosheet heterojunctions for the efficient photocatalytic synthesis of imine via toluene and aniline coupling
Bi 2 WO 6 /BiOBr ultrathin nanosheet heterojunctions with photochromic behavior enable photocatalytic C–H oxidation of toluene and subsequent coupling with aniline, achieving 99% imine yield via synergistic charge separation and oxygen activation.
- Open Access
- 22 April 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (47) , e75566
Oxygen/Nitrogen Dual‐Vacancy‐Engineered Bi 2 MoO 6 /g‐C 3 N 4 S‐scheme Heterojunction Nanosheets for Visible‐Light‐Driven Photosynthesis of Benzonitriles
Nitrogen‐containing organic compounds, particularly nitriles, are indispensable building blocks in pharmaceuticals and fine chemicals, yet their conventional synthesis often relies on toxic cyanide sources and energy‐intensive conditions. Herein, we present a visible‐light‐driven (λ = 420 nm) photocatalytic ammoxidation of benzyl alcohol to benzonitrile at room temperature. A rational design of an S‐scheme heterojunction photocatalyst, Bi 2 MoO 6 /g‐C 3 N 4 (BMO/CN), incorporating dual active sites through oxygen vacancies (OVs) and nitrogen vacancies (NVs) via precise defect engineering, achieves exceptional catalytic performance with 94% yield and >99% selectivity. The S‐scheme heterojunction not only preserves high redox potentials for simultaneous benzyl alcohol oxidation and O 2 reduction but also enhances charge carrier separation. Crucially, the dual‐vacancy structure significantly enhances the activation of O 2 and NH 3 , leading to efficient generation of O 2 • − radicals and promoting the condensation of NH 3 with the aldehyde intermediate to form an imine species. Mechanistic studies reveal that the reaction proceeds through an optimized cascade pathway involving alcohol oxidation, aldehyde‐amine condensation, and imine dehydrogenation mediated by collaboratively bromine radicals (Br•) and O 2 • − collaboratively to yield benzonitrile. This work presents a novel heterogeneous photocatalytic system for cyanide‐free nitrile synthesis and provides fundamental insights into activity regulation through precise defect engineering and heterojunction design.
- 22 April 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (47) , e75566
Open AccessOxygen/Nitrogen Dual‐Vacancy‐Engineered Bi 2 MoO 6 /g‐C 3 N 4 S‐scheme Heterojunction Nanosheets for Visible‐Light‐Driven Photosynthesis of Benzonitriles
Nitrogen‐containing organic compounds, particularly nitriles, are indispensable building blocks in pharmaceuticals and fine chemicals, yet their conventional synthesis often relies on toxic cyanide sources and energy‐intensive conditions. Herein, we present a visible‐light‐driven (λ = 420 nm) photocatalytic ammoxidation of benzyl alcohol to benzonitrile at room temperature. A rational design of an S‐scheme heterojunction photocatalyst, Bi 2 MoO 6 /g‐C 3 N 4 (BMO/CN), incorporating dual active sites through oxygen vacancies (OVs) and nitrogen vacancies (NVs) via precise defect engineering, achieves exceptional catalytic performance with 94% yield and >99% selectivity. The S‐scheme heterojunction not only preserves high redox potentials for simultaneous benzyl alcohol oxidation and O 2 reduction but also enhances charge carrier separation. Crucially, the dual‐vacancy structure significantly enhances the activation of O 2 and NH 3 , leading to efficient generation of O 2 • − radicals and promoting the condensation of NH 3 with the aldehyde intermediate to form an imine species. Mechanistic studies reveal that the reaction proceeds through an optimized cascade pathway involving alcohol oxidation, aldehyde‐amine condensation, and imine dehydrogenation mediated by collaboratively bromine radicals (Br•) and O 2 • − collaboratively to yield benzonitrile. This work presents a novel heterogeneous photocatalytic system for cyanide‐free nitrile synthesis and provides fundamental insights into activity regulation through precise defect engineering and heterojunction design.
- 20 February 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (8) , 7238-7248
Photosystem II-Inspired Ce-MOF for Selectively Coupling Photocatalytic Nitro-to-Azoxy Conversion with Water Oxidation
The integration of photocatalytic water oxidation with selective organic transformations remains challenging due to inefficient charge separation and intermediate regulation. Inspired by the spatially separated redox centers of photosystem II (PSII), we developed a cerium(IV)-based metal-organic framework (Ce(IV)-DPA) constructed from anthracene-derived ligands (DPA) and dinuclear Ce2(μ-O) clusters, which mimic the enzymatic compartmentalization of oxidation and reduction sites and synergistically drive visible-light-induced nitrobenzene-to-azoxybenzene conversion coupled with stoichiometric water oxidation. Single-crystal X-ray diffraction unambiguously identifies nitrobenzene coordination to Ce(IV) centers, establishing rare atomic-resolution evidence for substrate activation in MOF photocatalysis, guiding targeted electron transfer. Through the LMCT process, photogenerated electrons reduce Ce(IV) to Ce(III), driving sequential proton-coupled electron transfers (PCET) for nitrobenzene-to-azoxybenzene conversion with 91% yield and 96% selectivity, while holes oxidize water, outperforming Ce(III)-DPA analogs by 49% in yield. Isotopic tracer studies confirm water as the exclusive proton source, mirroring PSII's PCET mechanism. DFT reveals that the LUMO of Ce(IV)-DPA localizes on the nitro group, enabling directional electron transfer. The synergy of coordination flexibility and framework confinement in Ce(IV)-DPA spatially preorganizes intermediates (e.g., nitrosobenzene/N-phenylhydroxylamine) for selective azoxybenzene coupling, ensuring >95% selectivity and stability over six cycles. By emulating the compartmentalized redox architecture of PSII, this work establishes a Ce(IV)-DPA catalytic paradigm for scalable solar-to-chemical conversion, offering a paradigm for high-value nitrogen chemical production coupling with water oxidation.
- 20 February 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (8) , 7238-7248
Photosystem II-Inspired Ce-MOF for Selectively Coupling Photocatalytic Nitro-to-Azoxy Conversion with Water Oxidation
The integration of photocatalytic water oxidation with selective organic transformations remains challenging due to inefficient charge separation and intermediate regulation. Inspired by the spatially separated redox centers of photosystem II (PSII), we developed a cerium(IV)-based metal-organic framework (Ce(IV)-DPA) constructed from anthracene-derived ligands (DPA) and dinuclear Ce2(μ-O) clusters, which mimic the enzymatic compartmentalization of oxidation and reduction sites and synergistically drive visible-light-induced nitrobenzene-to-azoxybenzene conversion coupled with stoichiometric water oxidation. Single-crystal X-ray diffraction unambiguously identifies nitrobenzene coordination to Ce(IV) centers, establishing rare atomic-resolution evidence for substrate activation in MOF photocatalysis, guiding targeted electron transfer. Through the LMCT process, photogenerated electrons reduce Ce(IV) to Ce(III), driving sequential proton-coupled electron transfers (PCET) for nitrobenzene-to-azoxybenzene conversion with 91% yield and 96% selectivity, while holes oxidize water, outperforming Ce(III)-DPA analogs by 49% in yield. Isotopic tracer studies confirm water as the exclusive proton source, mirroring PSII's PCET mechanism. DFT reveals that the LUMO of Ce(IV)-DPA localizes on the nitro group, enabling directional electron transfer. The synergy of coordination flexibility and framework confinement in Ce(IV)-DPA spatially preorganizes intermediates (e.g., nitrosobenzene/N-phenylhydroxylamine) for selective azoxybenzene coupling, ensuring >95% selectivity and stability over six cycles. By emulating the compartmentalized redox architecture of PSII, this work establishes a Ce(IV)-DPA catalytic paradigm for scalable solar-to-chemical conversion, offering a paradigm for high-value nitrogen chemical production coupling with water oxidation.
- 2 August 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (31) , 28719-28729
Photochromic Cu-TiO2 Nanocatalysts for Visible-Light-Triggered C−Cl Activation and Selective Molecular Assembly
The efficient photoactivation of C-Cl bonds to selectively form C-C and C-O bonds via cross-coupling has emerged as a promising strategy for photosynthesizing pharmaceuticals. However, achieving selective cross-coupling of unactivated C-Cl bonds using visible light in a photoredox system remains a formidable challenge. Herein, we report a cooperative photoredox catalysis system that efficiently activates benzyl chloride (BnCl) in conjunction with photooxidation of hydroxyphenol, enabling the selective formation of C-C and C-O pharmaceuticals, such as 4-(benzyloxy)phenol (monobenzone) and benzylated 1,4-benzoquinone, over photochromic Cu-doped TiO2 (Cu-TiO2) nanoparticles. Mechanistic investigations and theoretical calculations reveal that the Cu doping enhances the BnCl coordination, and the photochromism-induced Cu+/0 active sites efficiently promote the C-Cl bonds activation, resulting in homocoupling of bibenzyl with excellent yield (>96%), selectivity (>99%), and stability (>30 days). Moreover, C-C and C-O bond pharmaceuticals are selectively synthesized by cooperating the photoreduction of BnCl with the solvent-induced photooxidation of p-phenol, facilitated by photochromism-induced Cu+/0 species and oxygen vacancies in Cu-TiO2 nanoparticles. This work establishes a framework for the rational design of photochromic catalysts for the activation and functionalization of C/Cl bonds within a photoredox system.
- 2 August 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (31) , 28719-28729
Photochromic Cu-TiO2 Nanocatalysts for Visible-Light-Triggered C−Cl Activation and Selective Molecular Assembly
The efficient photoactivation of C-Cl bonds to selectively form C-C and C-O bonds via cross-coupling has emerged as a promising strategy for photosynthesizing pharmaceuticals. However, achieving selective cross-coupling of unactivated C-Cl bonds using visible light in a photoredox system remains a formidable challenge. Herein, we report a cooperative photoredox catalysis system that efficiently activates benzyl chloride (BnCl) in conjunction with photooxidation of hydroxyphenol, enabling the selective formation of C-C and C-O pharmaceuticals, such as 4-(benzyloxy)phenol (monobenzone) and benzylated 1,4-benzoquinone, over photochromic Cu-doped TiO2 (Cu-TiO2) nanoparticles. Mechanistic investigations and theoretical calculations reveal that the Cu doping enhances the BnCl coordination, and the photochromism-induced Cu+/0 active sites efficiently promote the C-Cl bonds activation, resulting in homocoupling of bibenzyl with excellent yield (>96%), selectivity (>99%), and stability (>30 days). Moreover, C-C and C-O bond pharmaceuticals are selectively synthesized by cooperating the photoreduction of BnCl with the solvent-induced photooxidation of p-phenol, facilitated by photochromism-induced Cu+/0 species and oxygen vacancies in Cu-TiO2 nanoparticles. This work establishes a framework for the rational design of photochromic catalysts for the activation and functionalization of C/Cl bonds within a photoredox system.
- 6 May 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (19) , 9893-9902
Rapid and Reversible Plasmonic Coupling of Silver Nanoparticle Films on Arbitrary Solid Substrates for Information Encryption
- 6 May 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (19) , 9893-9902
Rapid and Reversible Plasmonic Coupling of Silver Nanoparticle Films on Arbitrary Solid Substrates for Information Encryption
- 11 April 2025
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 12 (15) , 4720-4730
Efficient photo-oxidation of C(sp 3 )–H bonds on visible-light-responsive W-doped TiO 2 nanocrystals promoted by the photochromic effect
Visible-light-responsive photochromic W-doped TiO 2 nanocrystals were designed for photocatalytic oxidation of C(sp 3 )–H bonds with high efficiencies.
- 11 April 2025
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 12 (15) , 4720-4730
Efficient photo-oxidation of C(sp 3 )–H bonds on visible-light-responsive W-doped TiO 2 nanocrystals promoted by the photochromic effect
Visible-light-responsive photochromic W-doped TiO 2 nanocrystals were designed for photocatalytic oxidation of C(sp 3 )–H bonds with high efficiencies.
- 2 December 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (50) , 34186-34194
Photoreversible Color-Switching Cu-Doped TiO2 Nanoparticles for High-Contrast Rewritable Printing
Light-printable rewritable paper that can be used multiple times has attracted extensive attention because of its potential benefits in reducing environmental pollution and energy consumption. Developing rewritable paper with high black-to-colorless contrast, lasting legibility, and a fast response is fascinating but challenging. Here, we integrate the redox chemistry of Cu2+ ions into photoreductive TiO2 nanoparticles to produce Cu-doped TiO2 nanoparticles capable of highly photoreversible switching between colorless and black with excellent contrast and color stability. Incorporating such nanoparticles into hydroxyethyl cellulose produces a rewritable paper with the same appearance as that of conventional paper. More importantly, it demonstrates great features promising for practical applications, including high black-to-colorless contrast, fast light-printing (3 days), high reversibility (>50 cycles), high resolution (90 μm), and large scale (A4 size) applicability.
- 2 December 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (50) , 34186-34194
Photoreversible Color-Switching Cu-Doped TiO2 Nanoparticles for High-Contrast Rewritable Printing
Light-printable rewritable paper that can be used multiple times has attracted extensive attention because of its potential benefits in reducing environmental pollution and energy consumption. Developing rewritable paper with high black-to-colorless contrast, lasting legibility, and a fast response is fascinating but challenging. Here, we integrate the redox chemistry of Cu2+ ions into photoreductive TiO2 nanoparticles to produce Cu-doped TiO2 nanoparticles capable of highly photoreversible switching between colorless and black with excellent contrast and color stability. Incorporating such nanoparticles into hydroxyethyl cellulose produces a rewritable paper with the same appearance as that of conventional paper. More importantly, it demonstrates great features promising for practical applications, including high black-to-colorless contrast, fast light-printing (3 days), high reversibility (>50 cycles), high resolution (90 μm), and large scale (A4 size) applicability.