Zhi-Bo Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Zhi-Bo Liu has a total of 217 co-authors. Here are the top co-authors by number of shared publications:
Jian-Guo Tian
Nankai Univ, Sch Phys, Key Lab Weak Light Nonlinear Photon, Minist Educ, Tianjin 300071, Peoples R China
17 shared publicationsJianguo Tian
16 shared publications- Jian-Guo Tian
The Key Laboratory of Weak Light Nonlinear Photonics, Ministry of Education, School of Physics and TEDA Institute of Applied Physics, Nankai University, Tianjin 300071, China
14 shared publications - Xiao-Qing Yan
Key Laboratory of Weak-Light Nonlinear Photonics, Ministry of Education, School of Physics, Nankai University, Tianjin, China
11 shared publications Bao-Wang Su
The Key Laboratory of Weak Light Nonlinear Photonics, Ministry of Education, School of Physics and Teda Applied Physics Institute, Nankai University, Tianjin 300071, China
8 shared publications- Wei Xin
State Key Laboratory of Integrated Optoelectronics, Key Laboratory of UV-Emitting Materials and Technology of Ministry of Education, Northeast Normal University, Changchun, China
8 shared publications
Latest Publications
- Open Access
- 15 September 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (86) , e78461
Logic‐Native Ferroelectric Transistor Arrays for Neuromorphic Edge Vision
Neuromorphic edge vision seeks to reduce data movement by extracting compact and decision‐relevant features close to the sensor. Most in‐sensor and in‐memory hardware, however, has been designed around synaptic weighting and multiply‐accumulate operations, whereas early visual perception also relies on local comparison, thresholding, and Boolean decisions. Here, we present a topology‐reconfigurable ferroelectric field‐effect transistor array for logic‐native front‐end visual computing. Remanent ferroelectric polarization programs reconfigurable in‐plane junctions in a van der Waals heterostructure, enabling dual‐mode operation as programmable transistors or non‐volatile logic‐memory elements. This device‐level programmability supports functionally complete Boolean operations in a compact two‐cell unit, while transistor‐mode cells act as reconfigurable interconnects for cascaded and parallel logic execution. Using this architecture, we implement hardware logic convolution that maps local spatial correlations into Boolean operations for in situ feature extraction. The logic‐processed outputs are intrinsically binarized, reducing data bit‐width and computational complexity while preserving discriminative visual information. The system achieves ultralow energy consumption (≈2.2 fJ per operation), improves CIFAR‐10 classification accuracy from 93% to 98% under the tested pipeline, and reduces computational cost by more than 50 times. This work establishes a complementary neuromorphic hardware primitive for edge vision, extending device‐level intelligence beyond synaptic MAC toward reconfigurable logic‐based visual preprocessing.
- 15 September 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (86) , e78461
Open AccessLogic‐Native Ferroelectric Transistor Arrays for Neuromorphic Edge Vision
Neuromorphic edge vision seeks to reduce data movement by extracting compact and decision‐relevant features close to the sensor. Most in‐sensor and in‐memory hardware, however, has been designed around synaptic weighting and multiply‐accumulate operations, whereas early visual perception also relies on local comparison, thresholding, and Boolean decisions. Here, we present a topology‐reconfigurable ferroelectric field‐effect transistor array for logic‐native front‐end visual computing. Remanent ferroelectric polarization programs reconfigurable in‐plane junctions in a van der Waals heterostructure, enabling dual‐mode operation as programmable transistors or non‐volatile logic‐memory elements. This device‐level programmability supports functionally complete Boolean operations in a compact two‐cell unit, while transistor‐mode cells act as reconfigurable interconnects for cascaded and parallel logic execution. Using this architecture, we implement hardware logic convolution that maps local spatial correlations into Boolean operations for in situ feature extraction. The logic‐processed outputs are intrinsically binarized, reducing data bit‐width and computational complexity while preserving discriminative visual information. The system achieves ultralow energy consumption (≈2.2 fJ per operation), improves CIFAR‐10 classification accuracy from 93% to 98% under the tested pipeline, and reduces computational cost by more than 50 times. This work establishes a complementary neuromorphic hardware primitive for edge vision, extending device‐level intelligence beyond synaptic MAC toward reconfigurable logic‐based visual preprocessing.
- 31 August 2026
- Published by Optica Publishing Group in Optica
- Vol. 13 (9) , 1735
Twist-controlled Goos–Hänchen shift and electron–hole asymmetry in bilayer graphene
Twisted bilayer graphene (TBG) provides a versatile platform for quantum state engineering, yet its high-energy electron–hole asymmetry remains experimentally elusive due to optical broadening in traditional absorption spectra. Here, we demonstrate the precise control of the Goos–Hänchen (GH) shift in TBG by manipulating the interlayer twist angle. By leveraging the GH shift’s intrinsic sensitivity to phase gradients, we report what we believe is the first experimental observation of the predicted splitting in the complex refractive index ( n ~) at van Hove singularities for large twist angles ( θ >10 ∘ ). Our measurements reveal a splitting interval below 100 meV, which is associated with the interlayer distance and interlayer coupling of TBG. These findings establish GH shift spectroscopy as a powerful phase-sensitive probe for moiré superlattices, surpassing conventional optical methods in resolving fine band-structure features and informing the design of moiré-based optoelectronics.
- 31 August 2026
- Published by Optica Publishing Group in Optica
- Vol. 13 (9) , 1735
Twist-controlled Goos–Hänchen shift and electron–hole asymmetry in bilayer graphene
Twisted bilayer graphene (TBG) provides a versatile platform for quantum state engineering, yet its high-energy electron–hole asymmetry remains experimentally elusive due to optical broadening in traditional absorption spectra. Here, we demonstrate the precise control of the Goos–Hänchen (GH) shift in TBG by manipulating the interlayer twist angle. By leveraging the GH shift’s intrinsic sensitivity to phase gradients, we report what we believe is the first experimental observation of the predicted splitting in the complex refractive index ( n ~) at van Hove singularities for large twist angles ( θ >10 ∘ ). Our measurements reveal a splitting interval below 100 meV, which is associated with the interlayer distance and interlayer coupling of TBG. These findings establish GH shift spectroscopy as a powerful phase-sensitive probe for moiré superlattices, surpassing conventional optical methods in resolving fine band-structure features and informing the design of moiré-based optoelectronics.
- Open Access
- 17 July 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (29) , eaed9436
Reconfigurable ferroelectric transistor array for embodied neuromorphic vision with hardware-native sensing, computing, and activation
Edge artificial intelligence (AI) and embodied vision call for compact, fast, and energy-efficient hardware that integrates sensing, linear analog computation, and nonlinear activation, while flexibly reallocating these functions as workloads change. However, in-sensor computing (ISC) and in-memory computing (IMC) platforms still implement activation with external peripherals and use fixed functional partitions, which break the analog signal path and restrict system reconfigurability. Here, we report a reconfigurable ferroelectric transistor (Fe-FET) array in which polarization-programmed local fields enable junction-barrier engineering in ambipolar tungsten diselenide (WSe 2 ) channel. This junction-barrier engineering mechanism co-programs photoresponsivity, multilevel conductance, and tunable nonlinear transport within the same device, allowing each Fe-FET cell to be reassigned among weighted sensing (ISC), linear accumulation (IMC), and hardware-native activation. The array therefore functions as a uniform pool of physical units whose roles and spatial partitions can be dynamically allocated to match task demands without changing the hardware platform. Using this role-reconfigurable platform, we implement an end-to-end analog neuromorphic vision system in which broadband sensing, linear computation, and nonlinear activation are executed natively on the same Fe-FET platform. These results establish a task-adaptive and energy-efficient route toward scalable neuromorphic vision hardware for edge intelligence.
- 17 July 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (29) , eaed9436
Open AccessReconfigurable ferroelectric transistor array for embodied neuromorphic vision with hardware-native sensing, computing, and activation
Edge artificial intelligence (AI) and embodied vision call for compact, fast, and energy-efficient hardware that integrates sensing, linear analog computation, and nonlinear activation, while flexibly reallocating these functions as workloads change. However, in-sensor computing (ISC) and in-memory computing (IMC) platforms still implement activation with external peripherals and use fixed functional partitions, which break the analog signal path and restrict system reconfigurability. Here, we report a reconfigurable ferroelectric transistor (Fe-FET) array in which polarization-programmed local fields enable junction-barrier engineering in ambipolar tungsten diselenide (WSe 2 ) channel. This junction-barrier engineering mechanism co-programs photoresponsivity, multilevel conductance, and tunable nonlinear transport within the same device, allowing each Fe-FET cell to be reassigned among weighted sensing (ISC), linear accumulation (IMC), and hardware-native activation. The array therefore functions as a uniform pool of physical units whose roles and spatial partitions can be dynamically allocated to match task demands without changing the hardware platform. Using this role-reconfigurable platform, we implement an end-to-end analog neuromorphic vision system in which broadband sensing, linear computation, and nonlinear activation are executed natively on the same Fe-FET platform. These results establish a task-adaptive and energy-efficient route toward scalable neuromorphic vision hardware for edge intelligence.
- 17 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 8 (14) , 6079-6092
Multimodal Flexible Sensors Based on Porous Laser-Induced Graphene with Tunable Thermal Therapy and Haptic Perception
Laser-induced technology on polyimide(PI) substrates, as an effective and simple method, is used to prepare patterned and large-area graphene for application in healthcare monitoring and human motion sensing. However, laser-induced graphene on PI substrates has some limitations in healthcare monitoring and human motion sensing due to low skin compatibility and nonstretchability issues. Therefore, PDMS-LIG-PDMS wearable and flexible sensor is prepared by the semi-solid-state transfer (S3T) strategy, which can achieve the high-quality and rapid transfer of LIG by precisely controlling the polydimethylsiloxane (PDMS) curing process (cured at 70 °C for 20 min to reach a semi-solid state). The as-fabricated PDMS-LIG-PDMS flexible sensor (P-LIG-PFS) exhibits a rapid response of 250 ms and a stable cycling life of over 10,000 s. Benefiting from the unique mechanism coupling microcrack propagation and transverse tension, the sensor demonstrates piecewise high sensitivity over a wide working range: within the pressure range of 0–40 kPa, the sensitivity is 1.948 kPa–1 in the 0–20 kPa interval and reaches a peak of 5.599 kPa–1 in the 26–34 kPa interval; within the tensile strain range of 0–40%, the gauge factor (GF) significantly increases from 7.440 in the 0–20% interval to 24.982 in the 30–40% interval. In addition, the sensor can not only be integrated into a mechanical claw to achieve tactile perception of various objects, but also provide thermotherapy for the human body, demonstrating broad application prospects in wearable medical devices and humanoid robotics.
- 17 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 8 (14) , 6079-6092
Multimodal Flexible Sensors Based on Porous Laser-Induced Graphene with Tunable Thermal Therapy and Haptic Perception
Laser-induced technology on polyimide(PI) substrates, as an effective and simple method, is used to prepare patterned and large-area graphene for application in healthcare monitoring and human motion sensing. However, laser-induced graphene on PI substrates has some limitations in healthcare monitoring and human motion sensing due to low skin compatibility and nonstretchability issues. Therefore, PDMS-LIG-PDMS wearable and flexible sensor is prepared by the semi-solid-state transfer (S3T) strategy, which can achieve the high-quality and rapid transfer of LIG by precisely controlling the polydimethylsiloxane (PDMS) curing process (cured at 70 °C for 20 min to reach a semi-solid state). The as-fabricated PDMS-LIG-PDMS flexible sensor (P-LIG-PFS) exhibits a rapid response of 250 ms and a stable cycling life of over 10,000 s. Benefiting from the unique mechanism coupling microcrack propagation and transverse tension, the sensor demonstrates piecewise high sensitivity over a wide working range: within the pressure range of 0–40 kPa, the sensitivity is 1.948 kPa–1 in the 0–20 kPa interval and reaches a peak of 5.599 kPa–1 in the 26–34 kPa interval; within the tensile strain range of 0–40%, the gauge factor (GF) significantly increases from 7.440 in the 0–20% interval to 24.982 in the 30–40% interval. In addition, the sensor can not only be integrated into a mechanical claw to achieve tactile perception of various objects, but also provide thermotherapy for the human body, demonstrating broad application prospects in wearable medical devices and humanoid robotics.
- 15 February 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (39)
Self‐Trapped Excitons and Nonlinear Dielectric Modulation in Van Der Waals Ferroelectric CuInP 2 S 6
Van der Waals (vdW) ferroelectrics offer a unique platform for exploring light–matter interactions and developing advanced optoelectronic devices. However, the excited‐state properties of these materials, particularly those involving self‐trapped excitons (STEs), remain largely unexplored. Here, we report the observation of STEs emission in the vdW ferroelectric CuInP 2 S 6 (CIPS), which is activated by in‐plane lattice distortions induced by Cu deficiencies. The STEs exhibit a broad photoluminescence (PL) range from 500–700 nm, a large Stokes shift of ≈ 0.7–0.8 eV, and a nanosecond‐scale lifetime. Temperature‐dependent PL measurements reveal strong electron–phonon coupling, characterized by a high Huang–Rhys factor of 8.54 and an exciton binding energy of 318 meV. Using excited‐state‐sensitive Goos–Hänchen (GH) shift spectroscopy, we identify polarization‐dependent optical responses of STEs, with a distinct displacement peak emerging only under s ‐polarized illumination. Furthermore, the optical conductivity extracted from GH spectra exhibits nonlinear dispersion near the energy levels of the self‐trapped states, indicating modified dielectric behavior in the excited state. The coexistence of ferroelectricity and visible‐light activity endows Cu‐deficient CIPS with strong potential for broadband light emission, photodetection, and neuromorphic optoelectronic applications.
- 15 February 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (39)
Self‐Trapped Excitons and Nonlinear Dielectric Modulation in Van Der Waals Ferroelectric CuInP 2 S 6
Van der Waals (vdW) ferroelectrics offer a unique platform for exploring light–matter interactions and developing advanced optoelectronic devices. However, the excited‐state properties of these materials, particularly those involving self‐trapped excitons (STEs), remain largely unexplored. Here, we report the observation of STEs emission in the vdW ferroelectric CuInP 2 S 6 (CIPS), which is activated by in‐plane lattice distortions induced by Cu deficiencies. The STEs exhibit a broad photoluminescence (PL) range from 500–700 nm, a large Stokes shift of ≈ 0.7–0.8 eV, and a nanosecond‐scale lifetime. Temperature‐dependent PL measurements reveal strong electron–phonon coupling, characterized by a high Huang–Rhys factor of 8.54 and an exciton binding energy of 318 meV. Using excited‐state‐sensitive Goos–Hänchen (GH) shift spectroscopy, we identify polarization‐dependent optical responses of STEs, with a distinct displacement peak emerging only under s ‐polarized illumination. Furthermore, the optical conductivity extracted from GH spectra exhibits nonlinear dispersion near the energy levels of the self‐trapped states, indicating modified dielectric behavior in the excited state. The coexistence of ferroelectricity and visible‐light activity endows Cu‐deficient CIPS with strong potential for broadband light emission, photodetection, and neuromorphic optoelectronic applications.
- 30 January 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 17 (6) , 1855-1861
Electrical Double Layer as a Voltage Divider: Suppressing Counterion Transport in Atomically Thin Nanopores
Surface charge in nanochannels is traditionally understood to enhance the ionic conductance. Particularly in the low-concentration regime, the electrical double layer (EDL) enriches counterions significantly above bulk levels, thereby sustaining high conductance. Experimental deviations from this behavior, such as anomalous conductance scaling, are typically attributed to surface physicochemical limitations or an insufficient ion supply. However, through finite element method simulations of ion transport in atomically thin nanopores, we reveal that the EDL itself acts as a potent voltage divider. This effect intensifies by up to an order of magnitude as the surface charge density increases or the bulk concentration decreases. Consequently, the local driving field within the pore is severely suppressed, rendering the enriched counterions ineffective for conduction despite their high local density. We derive a phenomenological model for this field attenuation and combine it with a refined, beyond-Donnan ion distribution profile to construct a conductance formulation that accurately reproduces the observed scaling behavior. Our findings unveil a dual nature of the EDL: while capable of recruiting conductive ions, the EDL can paradoxically function as a formidable barrier to transport via voltage division, challenging the classical view of surface-charge-governed conduction.
- 30 January 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 17 (6) , 1855-1861
Electrical Double Layer as a Voltage Divider: Suppressing Counterion Transport in Atomically Thin Nanopores
Surface charge in nanochannels is traditionally understood to enhance the ionic conductance. Particularly in the low-concentration regime, the electrical double layer (EDL) enriches counterions significantly above bulk levels, thereby sustaining high conductance. Experimental deviations from this behavior, such as anomalous conductance scaling, are typically attributed to surface physicochemical limitations or an insufficient ion supply. However, through finite element method simulations of ion transport in atomically thin nanopores, we reveal that the EDL itself acts as a potent voltage divider. This effect intensifies by up to an order of magnitude as the surface charge density increases or the bulk concentration decreases. Consequently, the local driving field within the pore is severely suppressed, rendering the enriched counterions ineffective for conduction despite their high local density. We derive a phenomenological model for this field attenuation and combine it with a refined, beyond-Donnan ion distribution profile to construct a conductance formulation that accurately reproduces the observed scaling behavior. Our findings unveil a dual nature of the EDL: while capable of recruiting conductive ions, the EDL can paradoxically function as a formidable barrier to transport via voltage division, challenging the classical view of surface-charge-governed conduction.
- Open Access
- 14 January 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
A reconfigurable photosensitive split-floating-gate memory for neuromorphic computing and nonlinear activation
The rapid growth of artificial intelligence and the Internet of Things calls for compact hardware platforms that integrate sensing, computing, and nonlinear processing within a unified architecture. However, most existing neuromorphic systems implement only partial functionalities and rely on heterogeneous device integration, limiting scalability and efficiency. Here, we show a high-speed, reconfigurable multi-modal split-floating-gate memory that monolithically integrates in-sensor computing, in-memory computing, and multiple nonlinear activation functions within a single device structure. By programming charges in spatially separated floating gates, the device enables non-volatile analog control of photoresponsivity and conductance, as well as electrically reconfigurable rectification to emulate ReLU and Sigmoid activations. We further demonstrate a fully hardware-implemented sensor–processor system based on the multi-modal split-floating-gate memory arrays that performs complete unsupervised and supervised learning tasks. This work establishes a compact, energy-efficient, and reconfigurable hardware foundation for scalable intelligent systems beyond conventional silicon architectures.
- 14 January 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessA reconfigurable photosensitive split-floating-gate memory for neuromorphic computing and nonlinear activation
The rapid growth of artificial intelligence and the Internet of Things calls for compact hardware platforms that integrate sensing, computing, and nonlinear processing within a unified architecture. However, most existing neuromorphic systems implement only partial functionalities and rely on heterogeneous device integration, limiting scalability and efficiency. Here, we show a high-speed, reconfigurable multi-modal split-floating-gate memory that monolithically integrates in-sensor computing, in-memory computing, and multiple nonlinear activation functions within a single device structure. By programming charges in spatially separated floating gates, the device enables non-volatile analog control of photoresponsivity and conductance, as well as electrically reconfigurable rectification to emulate ReLU and Sigmoid activations. We further demonstrate a fully hardware-implemented sensor–processor system based on the multi-modal split-floating-gate memory arrays that performs complete unsupervised and supervised learning tasks. This work establishes a compact, energy-efficient, and reconfigurable hardware foundation for scalable intelligent systems beyond conventional silicon architectures.
- 20 November 2025
- Published by Elsevier in Materials Today Energy
- Vol. 54
Light-modulated 2D nanochannels for beyond-limit blue energy harvesting
- 20 November 2025
- Published by Elsevier in Materials Today Energy
- Vol. 54
Light-modulated 2D nanochannels for beyond-limit blue energy harvesting
- 29 October 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (44) , 21337-21345
Photo-Thermoelectric Response in Graphene/h-BN Heterostructures Induced by Interface Thermal Asymmetry for Enhanced Photodetection
- 29 October 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (44) , 21337-21345
Photo-Thermoelectric Response in Graphene/h-BN Heterostructures Induced by Interface Thermal Asymmetry for Enhanced Photodetection
- 11 September 2025
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 10 (9) , 7157-7165
Graphene Nanochannels for Label-Free Protein Detection and Protein–Protein Interaction Analysis
Resistive pulse sensing, utilizing the electrophoretic movement of proteins through nanopores or nanochannels, has emerged as a promising method for label-free protein detection and characterization. However, traditional solid-state materials, such as Si, SiO2, SiNx, and polydimethylsiloxane, suffer from significant limitations, including nonspecific protein interactions with solid surfaces that cause channel blockage, preventing the long-term reliability of resistive pulse sensing. In contrast, two-dimensional materials have attracted much attention due to their potential in biomolecular detection because of their ultrathin thickness, ultrahigh surface flatness, and extremely high mechanical strength. Among them, the extremely high surface flatness helps to reduce the transport resistance of biomolecules moving on its surface. Here, we demonstrate that graphene nanochannels, fabricated via layer assembly, provide exceptional properties for protein analysis, including low noise, high surface smoothness, and minimal nonspecific protein adsorption. These attributes make graphene nanochannels an ideal platform for long-term, stable protein characterization. Our findings show that these nanochannels can effectively differentiate between five distinct proteins based on resistive pulse signals. Additionally, we utilized the nanochannels to monitor the binding dynamics of immunoglobulin G (IgG) and the aggregation process of β-lactoglobulin, revealing the capability of graphene nanochannels in detecting protein-protein interactions and molecular conformational changes. This work highlights the potential of graphene nanochannels as powerful tools for label-free, highly sensitive protein identification and interaction studies, marking a significant advancement in biosensing technology in biomolecular research and diagnosis.
- 11 September 2025
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 10 (9) , 7157-7165
Graphene Nanochannels for Label-Free Protein Detection and Protein–Protein Interaction Analysis
Resistive pulse sensing, utilizing the electrophoretic movement of proteins through nanopores or nanochannels, has emerged as a promising method for label-free protein detection and characterization. However, traditional solid-state materials, such as Si, SiO2, SiNx, and polydimethylsiloxane, suffer from significant limitations, including nonspecific protein interactions with solid surfaces that cause channel blockage, preventing the long-term reliability of resistive pulse sensing. In contrast, two-dimensional materials have attracted much attention due to their potential in biomolecular detection because of their ultrathin thickness, ultrahigh surface flatness, and extremely high mechanical strength. Among them, the extremely high surface flatness helps to reduce the transport resistance of biomolecules moving on its surface. Here, we demonstrate that graphene nanochannels, fabricated via layer assembly, provide exceptional properties for protein analysis, including low noise, high surface smoothness, and minimal nonspecific protein adsorption. These attributes make graphene nanochannels an ideal platform for long-term, stable protein characterization. Our findings show that these nanochannels can effectively differentiate between five distinct proteins based on resistive pulse signals. Additionally, we utilized the nanochannels to monitor the binding dynamics of immunoglobulin G (IgG) and the aggregation process of β-lactoglobulin, revealing the capability of graphene nanochannels in detecting protein-protein interactions and molecular conformational changes. This work highlights the potential of graphene nanochannels as powerful tools for label-free, highly sensitive protein identification and interaction studies, marking a significant advancement in biosensing technology in biomolecular research and diagnosis.