TLTing Long

Ting Long

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ting Long has a total of 672 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Inhomogeneous mixing: from microscopic dynamics to mesoscopic staircases

    by Ting Long, Minjun J. Choi, Patrick H. Diamond

    Inhomogeneous mixing and the consequent mesoscopic layered structure have been observed in many physical systems, including magnetically confined fusion plasmas. Especially, in plasmas, mixing can be enhanced through turbulence spreading by intermittent coherent structures (blobs/voids), or suppressed owing to the formation of transport barriers (sheared zonal flows). Interestingly, blobs/voids and zonal flows are not independent, and they can coexist in a state of inhomogeneous mixing, often called the E×B staircase. In this paper, we first introduce recent experimental progress on the physics of blobs/voids: how turbulence spreading by blobs/voids occurs, the consequences of enhanced turbulence spreading for the scrape-off layer (SOL) power decay length and the interaction between blobs/voids and zonal flows. Then, we provide a brief review of experimental results on staircases, or more generally layered mesoscopic transport barriers. Staircases are often elusive in experiments, requiring integrating multi-diagnostic data, using high-dimensional diagnostics, or extracting hidden information from signals for their identification. Our understanding is still incomplete. This paper serves as an initial step towards applying insights gained from inhomogeneous mixing owing to blobs/voids to the understanding of a staircase. This article is part of the theme issue ‘Anti-diffusive transport and layering: from subcellular to astrophysical scales’.

  • Open Access

    Real-time CXRS analysis on HL-3 tokamak with reliable neural networks and cross-device transfer learning

    by Wenjing Tian, Zongyu Yang, Ting Long, Shuosu Yang, Hao Wu, Deliang Yu, Xiaoxue He, Chenchong Tang, Rui Ke, Min Xu, et al.

    We present a neural network-based method for real-time charge exchange recombination spectroscopy (CXRS) analysis on the HL-3 tokamak. To enhance model performance and reliability, we tailor the network architecture to the physical characteristics of CXRS spectra: the receptive field matches the Doppler-broadened line width, channel embedding encodes spatial awareness across diagnostic channels, and attention pooling focuses on the most informative spectral regions. These designs yield millisecond-level inference (0.56 ms per 32-channel) with accuracy comparable to conventional methods ( R 2 _ T i = 0.93, R 2 _ v t = 0.98). Furthermore, the model’s reliability is established through interpretability and uncertainty analysis. Interpretability analysis confirms that the model focuses on the Doppler-broadened wings of C VI for T i and tracks line shifts for v t , consistent with physical principles. Uncertainty estimates show that the model appropriately expresses higher uncertainty in regions where predictions are inherently more challenging. To address data scarcity on new devices, transfer learning from HL-2A tokamak markedly boosts performance in low-data regimes while retaining a modest advantage even with full HL-3 data, provided that the spectra are properly aligned and baseline subtracted. This work establishes a real-time, reliable, and data-efficient AI framework for CXRS analysis, offering a practical path to deploy machine learning approaches in plasma control on future fusion devices.

  • Open Access

    Density limit experiments and core-localized kinetic ballooning modes in HL–2A Ohmic heating plasmas

    by L W Hu, W Chen, P W Shi, T Long, J Q Xu, R R Ma, Y G Li, L M Yu, X Yu, M Jiang, et al.

    The density limit is a mysterious barrier to magnetic confinement nuclear fusion, and is still an unresolved issue. In this paper, we will present the experimental results of the density limit and core-localized kinetic magnetohydrodynamics (MHD) instabilities on HL–2A. Firstly, the high density shots with n e / n e G > 1 have been achieved by the conventional gas-puff fueling method in Ohmic heating plasmas, and the corresponding duration time is close to t ∼ 500 ms ( ∼ 30 τ E ), where τ E is the global energy confinement time. Secondly, it is found for the first time that there are kinetic MHD instabilities in the core plasmas while n e / n e G ∼ 1 . The analysis suggests that the core-localized MHD activities belong to kinetic ballooning modes, and firstly it is found on experiment that they trigger the minor or major disruption of bulk plasmas while the density profile is peaked. These new findings are of great importance to figure out and understand the origin of the density limit.

  • Open Access

    Recent advances in physics and applications of 3D magnetic fields on the J-TEXT tokamak

    by Nengchao Wang, Yong Hua Ding, Zhongyong Chen, Donghui Xia, Zhoujun Yang, Zhipeng Chen, Wei Zheng, Wei Yan, Da Li, Song Zhou, et al.

    This paper summarizes recent experimental and theoretical progress achieved on the J-TEXT tokamak, with an emphasis on the physics and applications of 3D magnetic fields. Key hardware upgrades, including a new ICRF system and advanced 3D magnetic coil systems (RMP, island divertor, and the external rotational transform (ERT)), enable novel investigations into MHD instabilities, disruptions, transport, and divertor solutions. A major finding is the NTM-triggered formation of electron-ITB, where magnetic island nonlinearly interacts with turbulence to suppress transport and steepen core temperature gradients, and reveals a new mechanism for confinement improvement. Furthermore, IKM-driven NTV torque is identified as a key mechanism governing intrinsic rotation. The application of ERT coils successfully creates a Tokamak-Stellarator hybrid configuration, demonstrating complete suppression of NTMs and a 20% increase in stable plasma current. For boundary control, an island divertor configuration is established, reducing peak heat loads by ~50% and enabling detachment via SMBI fuelling. In disruption physics, synergetic control using RMP and O-point aligned ECRH efficiently suppresses locked modes and disruption, while low-n MPs are capable of RE suppression. Thermal quench timescale, estimated by a unified model with stochastic magnetic field and turbulence, matches experimental observations. Additionally, AI-driven disruption prediction frameworks, incorporating adaptive anomaly detection and cross-machine domain adaptation, are developed, with interpretability analyses linking predictions to physical mechanisms. Studies on turbulence and transport elucidate the role of electrode biasing, turbulence spreading on density limit, while helium ash removal dynamics are also investigated. The unique up-down symmetric poloidal divertor configuration is measured and modelling to identify the drift effect as a key driver for asymmetry, and hence target biasing is designed and experimentally studied for control these asymmetries. These collective advances in heating, 3D field control, stability, and AI forecasting provide critical solutions for managing plasma confinement and mitigating risks in future MCF devices.


  • Open Access

    Identification of mode numbers and wave numbers by multiple harmonics of instabilities

    by Liwen Hu, Wei Chen, W Y Zhai, K X Han, Peiwan Shi, Yu Zhou, Xi Feng, Sen Xu, Xin Yu, Shuo Su Yang, et al.

    Harmonic phenomena of plasma instabilities are frequently observed in tokamak plasmas. The harmonics of instabilities have higher toroidal mode numbers than their base modes, leading to proportionally larger Doppler shifts. This paper presents a method for determining the toroidal mode number based on the frequency differences between harmonics. Based on Doppler shift effect, the toroidal mode number can be expressed as n = (f l -f 1 )/((l-1)f vϕ ), where l is the harmonic order and f vϕ is the toroidal rotation frequency. Compared to conventional techniques for mode number identification, the proposed approach offers advantages such as simplified data processing and lower requirement for the number of diagnostic channels. The harmonic components in the frequency spectrum can also be used to retrieve the instability frequency in the plasma frame. In this paper, it is demonstrated that the harmonics of plasma instabilities are not generated by intrinsic mode coupling, but are attributed to the nonlinear distortion of waveform. Diagnostic measurements, including soft X-ray and microwave interferometry, confirm that higher-order harmonics of plasma instabilities exist as real structural features inside the plasma and can interact with microwaves when the Bragg condition is satisfied. This property can be utilized to determine the perpendicular wave numbers of the instabilities. A simple physical model of the distribution of an instability and its harmonics is also proposed.


  • Open Access

    Turbulence self-organization via inverse cascade drives broadband inward particle transport at the HL-2A plasma edge

    by Jie Wu, Tao Lan, Weixing Ding, Min Xu, Lin Nie, Wei Chen, Jiaren Wu, Yuxuan Li, Min Jiang, Ting Long, et al.

    A broadband reversal of the fluctuation-induced radial particle flux, specifically a transition from outward to inward, is observed at the edge of HL-2A L-mode plasmas during sustained NBI heating. This transition is driven by a systematic synchronization of the cross-phase between density and radial velocity fluctuations, rather than by changes in their amplitudes. Spectral analysis identifies the dominant role of low-frequency turbulence ($ < 30\ \rm kHz$), which exhibits contracting wavenumber spectra and extended correlation lengths, indicating self-organization into large-scale coherent structures. The inward flux is quantitatively linked to two key momentum-related parameters: a marked increase in the coherence of the Reynolds stress at low frequencies, and a near-linear dependence on the radial velocity gradient beyond a threshold of $\sim 0.8\times10^6\ \rm s^{-1}$. These findings are consistent with the dual cascade picture of two-dimensional turbulence, in which energy inversely cascades to form large-scale coherent structures that drive the inward flux, while enstrophy is transferred forward to smaller scales where it is dissipated. The concomitant observation of enhanced cross-scale coherence, further underscores the importance of multi-scale coupling in this self-organization process. This work establishes a direct connection between turbulent self-organization across multiple scales and the reversal of edge particle transport, offering new insights for transport control in fusion plasmas.

  • Open Access

    A summary of the 11th Asia-Pacific Transport Working Group (APTWG) meeting

    by Xiang Gao, Tao Zhang, Weixin Guo, Ting Long, Min Jiang, Huihui Wang, Yang Li, Ling Zhang, Zhengxiong Wang, Katsumi Ida, et al.

    The 11th Asia-Pacific Transport Working Group meeting was held at Shenzhen University, Shenzhen, China, from 27 to 30 May 2025. Five technical working groups with topics closely related to plasma turbulence and transport were as follows: (A) impurity transport in core and pedestal plasmas, (B) turbulence spreading and coupling in the core-edge-scrape-off layer, (C) transport and turbulence in 3D magnetic topology, (D) interaction between energetic particles, magnetohydrodynamic stability and turbulence, and (E) model reduction and experiments for verification and validation. This report presents a summary of the contributed papers in the five technical working groups and discussions and future prospects on these topics are also given.


  • Development of an E-band frequency-hopping microwave reflectometer on the HL-3 tokamak

    by Liwen Hu, Peiwan Shi, Wei Chen, Yu Zhou, Xi Feng, Wenyan Zhai, Zengchen Yang, Zhongbing Shi, Min Jiang, Ting Long, et al.

    To locally measure the density fluctuations in the plasma core on the HL-3 tokamak, an E-band (60-90 GHz) frequency-hopping microwave reflectometer was developed. The output frequency of the reflectometer can be tuned arbitrarily between 60 and 90 GHz, though a minimum period of 10 ms is required for each frequency hop. And the radial resolution of frequency-hopping microwave reflectometer can be <1 cm. The reflectometer consists of a frequency-hopping source and intermediate frequency electronics. The frequency-hopping source contains a control voltage module that can linearly output a voltage according to the radio frequency. Laboratory measurements reveal that the relative error of the frequency-hopping source’s output power is below 1.2 %, and the phase noise level of the frequency-hopping source meets the measurement requirements. The intermediate frequency electronics are used to launch a high-power microwave into plasma and obtain intermediate frequency signal with low conversion loss. The newly developed reflectometer was successfully applied to high-density discharges on HL-3 tokamak. A sudden increase in the density fluctuations is observed with the microwave reflectometer when the plasma density is close to the Greenward limit. Based on the output frequency of the reflectometer, it can be determined that the sudden increase in density perturbation occurs at least within the normalized minor radius ranging from approximately 0.56 to 0.67.


  • Open Access

    Effect of CT fuel deposition on the plasma density profile in the HL-3 tokamak

    by Qilong Dong, Tao Lan, Chijin Xiao, Chen Chen, Jie Zhang, Yongkang Zhou, Adil Yolbarsop, Lei Xue, Jie Wu, Ting Long, et al.

    Direct fuelling of the core region of a tokamak by compact torus (CT) injection plays a crucial role for fuelling and burning efficiency in a fusion reactor. However, the penetration and deposition processes of CT in fusion devices involve complex physical mechanisms. The objective of this study is to investigate the dynamic behavior of CT in a tokamak and assess the impact of fuel particle deposition on the bulk plasma parameters profiles, based on fundamental physical mechanisms and actual injection scenarios. This article reports a study which, for the first time, investigates (a) the penetration of a CT in a tokamak with the realistic peaked temperature and density profiles, (b) the influence of magnetic tension force on the CT trajectory and penetration parameters is evaluated, and (c) the effect of CT particle deposition on the tokamak density profile assuming that CT deposits its particles at a constant time rate without changing other CT parameters. A new dynamic model is proposed here to describe the penetration mechanism of CT in fusion devices. This model combines elements of the conducting sphere (CS) model and the nonslipping sphere (NS) model, while also accounting for realistic injection scenarios. The simulations use the HL-3 tokamak configuration as an example, assuming tangential CT injection on the mid-plane. By comparing the CT penetration depth estimated from the new dynamic model with that from the original model, a radial penetration difference of 0.23 m is observed, which corresponds to 35% of the HL-3 tokamak’ s small radius of 0.65 m. Furthermore, the effect of the profiles of the tokamak plasma parameters and CT fuel particle deposition is discussed. The reduced MHD drag force in the outer region with lower temperature and density facilitates CT penetration, while the loss of CT particles and thus the directional CT momentum along the injection direction hinders CT penetration. In a particular set of assumptions, CT penetration depth decreases by 31% when considering the deposition of CT particles compared to the case when the particle deposition is not considered. Finally, the analyses and simulations reveal that CT injection preferentially modifies tokamak density profile at the deepest CT penetration location in the central region.


  • Simultaneous two-dimensional measurement of plasma density and electron temperature evolution via multi-color gas puff imaging on the HL-3 tokamak

    by Y. Yu, J. B. Yuan, J. R. Wen, W. C. Wang, Z. J. Yang, C. Lei, B. D. Yuan, S. B. Gong, C. Y. Xiao, T. Long, et al.

    A Multi-Color Gas Puff Imaging (MC-GPI) diagnostic system has been implemented on the HL-3 tokamak, employing a helium line intensity ratio methodology for simultaneous two-dimensional (2D) measurements of plasma density and electron temperature. The system utilizes four distinct helium emission lines at 587.6, 667.8, 706.6, and 728.1 nm, with an optimized high-transmissivity short-wave-pass dichroic mirror array designed to address the weaker intensity of the 728.1 nm spectral line. Compared to conventional MC-GPI configurations, the redesigned optical path demonstrates a 15.3% enhancement in 728.1 nm line intensity under identical plasma conditions and other optical components. The diagnostic achieves temporal synchronization through simultaneous image acquisition using a single high-speed camera, ensuring precise time alignment across all spectral channels. Absolute calibration was performed through cross-validation with Langmuir probe measurements in linear plasma configurations. Its spatiotemporal resolution is 0.36 mm and 44 μs. This optimized system not only demonstrates superior measurement capabilities for edge plasma characterization in large tokamaks but also shows significant potential for diagnostic applications in various helium plasma environments.