Juan Miguel Tiscar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Juan Miguel Tiscar has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Francisco A. Gilabert
Department of Materials, Textiles and Chemical Engineering (MaTCh), Mechanics of Materials and Structures (MMS), Tech Lane Ghent Science Park-Campus A, Ghent University (UGent), Technologiepark-Zwijnaarde 46, 9052 Ghent, Belgium
5 shared publications J. Boix
4 shared publicationsF.A. Gilabert
Ghent Univ UGent, Fac Engn & Architecture FEA, Dept Mat Text & Chem Engn MaTCh, Technol Pk Zwijnaarde 46, B-9052 Zwinaarde, Belgium
3 shared publicationsG. Mallol
Jaume I Univ UJI, Technol Inst Ceram ITCc, Castellon de La Plana, Spain
3 shared publications- Ninghan Tang
Department of Materials, Textiles and Chemical Engineering (MaTCh), Mechanics of Materials and Structures (MMS), Tech Lane Ghent Science Park-Campus A, Ghent University (UGent), Technologiepark-Zwijnaarde 46, 9052 Ghent, Belgium
3 shared publications - Pei Hao
Department of Materials, Textiles and Chemical Engineering (MaTCh), Mechanics of Materials and Structures (MMS), Tech Lane Ghent Science Park-Campus A, Ghent University (UGent), Technologiepark-Zwijnaarde 46, 9052 Ghent, Belgium
3 shared publications
Latest Publications
- 5 November 2026
- Published by SAGE Publications in Indoor and Built Environment
A lightweight model for real-time safety management of nanoparticle concentrations in industrial spray processes
Industrial spraying processes incidentally generate high rates of hazardous nanoparticles (NPs), posing significant health risks to workers. While ventilation systems are critical for mitigation, optimizing their operation via Model Predictive Control (MPC) requires fast predictive tools, making traditional Computational Fluid Dynamics (CFD) unsuitable due to high computational costs. This study develops and validates a physics-based Lightweight Model (LWM) designed to predict real-time NPs concentrations in a thermal spraying booth. Based on a multizone airflow approach, the LWM incorporates source emissions, airflows induced by ventilation and openings, and diffusive transport using a well-mixed mass balance formulation. The model was validated using experimental data from an industrial facility and benchmarked against detailed CFD simulations. Results demonstrate that the LWM accurately predicts both the transient growth and steady-state stabilization of NP concentrations, achieving comparable accuracy to CFD but with drastically reduced computation time (minutes versus days). By offering accurate predictions with minimal computational demand, the proposed LWM is a promising prediction model for future MPC-based occupational safety and ventilation control. Its implementation and validation within a complete MPC framework remain future work.
- 5 November 2026
- Published by SAGE Publications in Indoor and Built Environment
A lightweight model for real-time safety management of nanoparticle concentrations in industrial spray processes
Industrial spraying processes incidentally generate high rates of hazardous nanoparticles (NPs), posing significant health risks to workers. While ventilation systems are critical for mitigation, optimizing their operation via Model Predictive Control (MPC) requires fast predictive tools, making traditional Computational Fluid Dynamics (CFD) unsuitable due to high computational costs. This study develops and validates a physics-based Lightweight Model (LWM) designed to predict real-time NPs concentrations in a thermal spraying booth. Based on a multizone airflow approach, the LWM incorporates source emissions, airflows induced by ventilation and openings, and diffusive transport using a well-mixed mass balance formulation. The model was validated using experimental data from an industrial facility and benchmarked against detailed CFD simulations. Results demonstrate that the LWM accurately predicts both the transient growth and steady-state stabilization of NP concentrations, achieving comparable accuracy to CFD but with drastically reduced computation time (minutes versus days). By offering accurate predictions with minimal computational demand, the proposed LWM is a promising prediction model for future MPC-based occupational safety and ventilation control. Its implementation and validation within a complete MPC framework remain future work.
- Open Access
- 2 April 2026
- Published by Elsevier in Ceramics International
- Vol. 52 (13) , 22191-22216
Simulation of ceramic tile sintering using a modified SOVS model under industrial production conditions
- 2 April 2026
- Published by Elsevier in Ceramics International
- Vol. 52 (13) , 22191-22216
Open AccessSimulation of ceramic tile sintering using a modified SOVS model under industrial production conditions
- 2 September 2025
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 306
Hybrid FEM-NN modeling of rate-dependent polymer mechanics across glass transition
- 2 September 2025
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 306
Hybrid FEM-NN modeling of rate-dependent polymer mechanics across glass transition
- Open Access
Untapped Potential of Recycled Thermoplastic Blends in UD Composites via Finite Element Analysis
The increasing demand for fully recyclable composites has spurred extensive research on thermoplastics, valued for their recyclability and excellent mechanical properties. High-performance thermoplastics such as PEEK and PPS have been widely adopted in aerospace applications due to their outstanding load-bearing capabilities, which are well documented. Recently, thermoplastic polymer blends have gained attention for their enhanced recyclability and sustainability, as well as their ability to improve thermal stability, viscosity, and manufacturability. However, limited data are available on the mechanical characterization of composites that incorporate these blends, particularly when recycled thermoplastics are used. In this study, we first examine the stress–strain behavior of the following three polymer blends relevant for structural applications: PES/PEEK, PPS/PEEK, and HDPE/PP. We then perform a numerical analysis to predict the mechanical performance of unidirectional fiber-reinforced composites using each blend as the matrix. This involves a micromechanical Representative Volume Element (RVE) approach combined with an advanced polymer model previously validated against experimental data. The findings are discussed to critically assess the suitability of these blends for producing fully matrix-recycled composites.
Open AccessUntapped Potential of Recycled Thermoplastic Blends in UD Composites via Finite Element Analysis
The increasing demand for fully recyclable composites has spurred extensive research on thermoplastics, valued for their recyclability and excellent mechanical properties. High-performance thermoplastics such as PEEK and PPS have been widely adopted in aerospace applications due to their outstanding load-bearing capabilities, which are well documented. Recently, thermoplastic polymer blends have gained attention for their enhanced recyclability and sustainability, as well as their ability to improve thermal stability, viscosity, and manufacturability. However, limited data are available on the mechanical characterization of composites that incorporate these blends, particularly when recycled thermoplastics are used. In this study, we first examine the stress–strain behavior of the following three polymer blends relevant for structural applications: PES/PEEK, PPS/PEEK, and HDPE/PP. We then perform a numerical analysis to predict the mechanical performance of unidirectional fiber-reinforced composites using each blend as the matrix. This involves a micromechanical Representative Volume Element (RVE) approach combined with an advanced polymer model previously validated against experimental data. The findings are discussed to critically assess the suitability of these blends for producing fully matrix-recycled composites.
- Open Access
Predicting Mechanical Responses in Polymer Blends with Unintended Polymer Fractions Using an Efficient Neural Network-Based Constitutive Material Model
Current mechanical recycling procedures often fall short of achieving 100% purity in recycled thermoplastics, which typically consist of mixed polymer types. These other polymers, though typically present in small amounts, can significantly affect the mechanical properties of the recycled material. Addressing this issue, this study introduces a neural network (NN) approach combined with a physically-based constitutive model to accurately predict the mechanical behavior of polymer blends of varying compositions. The NN-based method relies on the training of a crucial internal variable controlling the nonlinear response. This variable is derived from the physical model, which minimizes the dependence on extensive experimental data. We evaluated this approach on polymer blends of LLDPE/PET, LLDPE/PA6, and LDPE/PS at various weight fraction ratios. The results demonstrate that the NN-based model effectively aligns with experimental outcomes, enhancing our ability to predict how different blend ratios influence the mechanical properties of polymer blends. This capability is crucial for optimizing the use of recycled polymers in various applications.
Open AccessPredicting Mechanical Responses in Polymer Blends with Unintended Polymer Fractions Using an Efficient Neural Network-Based Constitutive Material Model
Current mechanical recycling procedures often fall short of achieving 100% purity in recycled thermoplastics, which typically consist of mixed polymer types. These other polymers, though typically present in small amounts, can significantly affect the mechanical properties of the recycled material. Addressing this issue, this study introduces a neural network (NN) approach combined with a physically-based constitutive model to accurately predict the mechanical behavior of polymer blends of varying compositions. The NN-based method relies on the training of a crucial internal variable controlling the nonlinear response. This variable is derived from the physical model, which minimizes the dependence on extensive experimental data. We evaluated this approach on polymer blends of LLDPE/PET, LLDPE/PA6, and LDPE/PS at various weight fraction ratios. The results demonstrate that the NN-based model effectively aligns with experimental outcomes, enhancing our ability to predict how different blend ratios influence the mechanical properties of polymer blends. This capability is crucial for optimizing the use of recycled polymers in various applications.
- 17 May 2024
- Published by Elsevier in Journal of the European Ceramic Society
- Vol. 44 (13) , 7730-7739
Enhanced Skorohod–Olevsky viscous model incorporating microstructure evolution for finite element analysis of ceramic sintering
- 17 May 2024
- Published by Elsevier in Journal of the European Ceramic Society
- Vol. 44 (13) , 7730-7739
Enhanced Skorohod–Olevsky viscous model incorporating microstructure evolution for finite element analysis of ceramic sintering
- 1 September 2021
- Published by Elsevier in Powder Technology
- Vol. 390, 20-33
DEM-based modelling framework for spray-dried powders in ceramic tiles industry. Part III: Validation procedure
- 1 September 2021
- Published by Elsevier in Powder Technology
- Vol. 390, 20-33
DEM-based modelling framework for spray-dried powders in ceramic tiles industry. Part III: Validation procedure
- 1 January 2021
- Published by Elsevier in Powder Technology
- Vol. 377, 795-812
DEM-based modelling framework for spray-dried powders in ceramic tiles industry. Part II: Solver implementation
- 1 January 2021
- Published by Elsevier in Powder Technology
- Vol. 377, 795-812
DEM-based modelling framework for spray-dried powders in ceramic tiles industry. Part II: Solver implementation
- 1 November 2019
- Published by Elsevier in Powder Technology
- Vol. 356, 818-831
DEM-based modelling framework for spray-dried powders in ceramic tiles industry. Part I: Calibration procedure
- 1 November 2019
- Published by Elsevier in Powder Technology
- Vol. 356, 818-831
DEM-based modelling framework for spray-dried powders in ceramic tiles industry. Part I: Calibration procedure