DDDaniel Devaprakash

Daniel Devaprakash

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Daniel Devaprakash has a total of 51 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Multi-level personalization of neuromusculoskeletal models to estimate physiologically plausible knee joint contact forces in children

    by Giorgio Davico, David G. Lloyd, Christopher P. Carty, Bryce A. Killen, Daniel Devaprakash, Claudio Pizzolato

    Neuromusculoskeletal models are a powerful tool to investigate the internal biomechanics of an individual. However, commonly used neuromusculoskeletal models are generated via linear scaling of generic templates derived from elderly adult anatomies and poorly represent a child, let alone children with a neuromuscular disorder whose musculoskeletal structures and muscle activation patterns are profoundly altered. Model personalization can capture abnormalities and appropriately describe the underlying (altered) biomechanics of an individual. In this work, we explored the effect of six different levels of neuromusculoskeletal model personalization on estimates of muscle forces and knee joint contact forces to tease out the importance of model personalization for normal and abnormal musculoskeletal structures and muscle activation patterns. For six children, with and without cerebral palsy, generic scaled models were developed and progressively personalized by (1) tuning and calibrating musculotendon units’ parameters, (2) implementing an electromyogram-assisted approach to synthesize muscle activations, and (3) replacing generic anatomies with image-based bony geometries, and physiologically and physically plausible muscle kinematics. Biomechanical simulations of gait were performed in the OpenSim and CEINMS software on ten overground walking trials per participant. A mixed-ANOVA test, with Bonferroni corrections, was conducted to compare all models’ estimates. The model with the highest level of personalization produced the most physiologically plausible estimates. Model personalization is crucial to produce physiologically plausible estimates of internal biomechanical quantities. In particular, personalization of musculoskeletal anatomy and muscle activation patterns had the largest effect overall. Increased research efforts are needed to ease the creation of personalized neuromusculoskeletal models.


  • Free Achilles tendon strain during selected rehabilitation, locomotor, jumping, and landing tasks

    by Daniel Devaprakash, David F. Graham, Rod S. Barrett, David G. Lloyd, Steven J. Obst, Ben Kennedy, Kahlee L. Adams, Ryan J. Kiely, Adam Hunter, Nicole Vlahovich, et al.

    A better understanding of the strains experienced by the Achilles tendon during commonly prescribed exercises and locomotor tasks is needed to improve efficacy of Achilles tendon training and rehabilitation programs. The aim of this study was to estimate in vivo free Achilles tendon strain during selected rehabilitation, locomotor, jumping, and landing tasks. Sixteen trained runners with no symptoms of Achilles tendinopathy participated in this study. Personalized free Achilles tendon moment arm and force-strain curve were obtained from imaging data and used in conjunction with motion capture and surface electromyography to estimate free Achilles tendon strain using electromyogram-informed neuromusculoskeletal modeling. There was a strong correspondence between Achilles tendon force estimates from the present study and experimental data reported in the literature (R2 > 0.85). The average tendon strain was highest for maximal hop landing (8.8 ± 1.6%), lowest for walking at 1.4 m/s (3.1 ± 0.8%), and increased with locomotor speed during running (run 3.0 m/s: 6.5 ± 1.6%; run 5.0 m/s: 7.9 ± 1.7%) and during heel rise exercise with added mass (BW: 5.8 ± 1.3%; 1.2 BW: 6.9 ± 1.7%). The peak tendon strain was highest during running (5 m/s: 13.7 ± 2.5%) and lowest during walking (1.4 m/s: 7 ± 1.8%). Overall findings provide a preliminary evidence base for exercise selection to maximize anabolic tendon remodeling during training and rehabilitation of the Achilles tendon. NEW & NOTEWORTHY Our work combines medical imaging and electromyogram-informed neuromusculoskeletal modeling data to estimate free Achilles tendon strain during selected rehabilitation, locomotor, jumping, and landing tasks in trained middle-distance runners. These data may potentially be used to inform Achilles tendon training and rehabilitation to maximize anabolic tendon remodeling.


  • Open Access

    The Free Achilles Tendon Is Shorter, Stiffer, Has Larger Cross-Sectional Area and Longer T2* Relaxation Time in Trained Middle-Distance Runners Compared to Healthy Controls

    by Daniel Devaprakash, Steven J. Obst, David G. Lloyd, Rod S. Barrett, Ben Kennedy, Iain Ball, Kahlee L. Adams, Tyler J. Collings, Giorgio Davico, Adam Hunter, et al.

    Tendon geometry and tissue properties are important determinants of tendon function and injury risk, and are altered in response to ageing, disease, and physical activity levels. The purpose of this study was to compare free Achilles tendon geometry and mechanical properties between sixteen trained elite/sub-elite middle-distance runners and a healthy control group. Magnetic resonance imaging was used to measure free Achilles tendon volume, length, average cross-sectional area, regional cross-sectional area, moment arm, and T2* relaxation time at rest, while freehand three-dimensional ultrasound was used to quantify free Achilles tendon mechanical stiffness, Young’s modulus, and length normalised mechanical stiffness. The free Achilles tendon in trained runners was significantly shorter and the average and regional cross-sectional area (distal end) were significantly larger compared to the control group. Mechanical stiffness of the free Achilles tendon was also significantly higher in trained runners compared to controls, which was explained by the group differences in tendon cross sectional area and length. T2* relaxation time was significantly longer in trained middle-distance runners when compared with healthy controls. There was no relationship between T2* relaxation time and Young’s modulus. The longer T2* relaxation time in trained runners may be indicative of a degree of accumulated damage, disorganised collagen, and increased water content in the free Achilles tendon. A shorter free Achilles tendon with larger cross-sectional area and higher mechanical stiffness may enable trained runners to rapidly transfer high muscle forces, as well as reduce the risk of tendon damage from mechanical fatigue.


  • Open Access

    Targeted Achilles Tendon Training and Rehabilitation Using Personalized and Real-Time Multiscale Models of the Neuromusculoskeletal System

    by Claudio Pizzolato, Vickie B. Shim, David G. Lloyd, Daniel Devaprakash, Steven J. Obst, Richard Newsham-West, David F. Graham, Thor F. Besier, Ming Hao Zheng, Rod S. Barrett

    Musculoskeletal tissues, including tendons, are sensitive to their mechanical environment, with both excessive and insufficient loading resulting in reduced tissue strength. Tendons appear to be particularly sensitive to mechanical strain magnitude, and there appears to be an optimal range of tendon strain that results in the greatest positive tendon adaptation. At present, there are no tools that allow localized tendon strain to be measured or estimated in training or a clinical environment. In this paper, we first review the current literature regarding Achilles tendon adaptation, providing an overview of the individual technologies that so far have been used in isolation to understand in vivo Achilles tendon mechanics, including 3D tendon imaging, motion capture, personalized neuromusculoskeletal rigid body models, and finite element models. We then describe how these technologies can be integrated in a novel framework to provide real-time feedback of localized Achilles tendon strain during dynamic motor tasks. In a proof of concept application, Achilles tendon localized strains were calculated in real-time for a single subject during walking, single leg hopping, and eccentric heel drop. Data was processed at 250 Hz and streamed on a smartphone for visualization. Achilles tendon peak localized strains ranged from ∼3 to ∼11% for walking, ∼5 to ∼15% during single leg hop, and ∼2 to ∼9% during single eccentric leg heel drop, overall showing large strain variation within the tendon. Our integrated framework connects, across size scales, knowledge from isolated tendons and whole-body biomechanics, and offers a new approach to Achilles tendon rehabilitation and training. A key feature is personalization of model components, such as tendon geometry, material properties, muscle geometry, muscle-tendon paths, moment arms, muscle activation, and movement patterns, all of which have the potential to affect tendon strain estimates. Model personalization is important because tendon strain can differ substantially between individuals performing the same exercise due to inter-individual differences in these model components.


  • Machine learning methods to support personalized neuromusculoskeletal modelling

    by David J. Saxby, Bryce Adrian Killen, C. Pizzolato, C. P. Carty, L. E. Diamond, L. Modenese, J. Fernandez, G. Davico, M. Barzan, G. Lenton, et al.

    Many biomedical, orthopaedic, and industrial applications are emerging that will benefit from personalized neuromusculoskeletal models. Applications include refined diagnostics, prediction of treatment trajectories for neuromusculoskeletal diseases, in silico design, development, and testing of medical implants, and human–machine interfaces to support assistive technologies. This review proposes how physics-based simulation, combined with machine learning approaches from big data, can be used to develop high-fidelity personalized representations of the human neuromusculoskeletal system. The core neuromusculoskeletal model features requiring personalization are identified, and big data/machine learning approaches for implementation are presented together with recommendations for further research.


  • Top Cited Papers
    Open Access

    Non-negative matrix factorisation is the most appropriate method for extraction of muscle synergies in walking and running

    by Mohammad Fazle Rabbi, Claudio Pizzolato, David G. Lloyd, Chris P. Carty, Daniel Devaprakash, Laura E. Diamond

    Muscle synergies provide a simple description of a complex motor control mechanism. Synergies are extracted from muscle activation patterns using factorisation methods. Despite the availability of several factorisation methods in the literature, the most appropriate method for muscle synergy extraction is currently unknown. In this study, we compared four muscle synergy extraction methods: non-negative matrix factorisation, principal component analysis, independent component analysis, and factor analysis. Probability distribution of muscle activation patterns were compared with the probability distribution of synergy excitation primitives obtained from the four factorisation methods. Muscle synergies extracted using non-negative matrix factorisation best matched the probability distribution of muscle activation patterns across different walking and running speeds. Non-negative matrix factorisation also best tracked changes in muscle activation patterns compared to the other factorisation methods. Our results suggest that non-negative matrix factorisation is the best factorisation method for identifying muscle synergies in dynamic tasks with different levels of muscle contraction.


  • Open Access

    Development and validation of statistical shape models of the primary functional bone segments of the foot

    by Tamara M. Grant, Laura E. Diamond, Claudio Pizzolato, Bryce A. Killen, Daniel Devaprakash, Luke Kelly, Jayishni N. Maharaj, David J. Saxby

    Introduction: Musculoskeletal models are important tools for studying movement patterns, tissue loading, and neuromechanics. Personalising bone anatomy within models improves analysis accuracy. Few studies have focused on personalising foot bone anatomy, potentially incorrectly estimating the foot’s contribution to locomotion. Statistical shape models have been created for a subset of foot-ankle bones, but have not been validated. This study aimed to develop and validate statistical shape models of the functional segments in the foot: first metatarsal, midfoot (second-to-fifth metatarsals, cuneiforms, cuboid, and navicular), calcaneus, and talus; then, to assess reconstruction accuracy of these shape models using sparse anatomical data. Methods: Magnetic resonance images of 24 individuals feet (age = 28 ± 6 years, 52% female, height = 1.73 ± 0.8 m, mass = 66.6 ± 13.8 kg) were manually segmented to generate three-dimensional point clouds. Point clouds were registered and analysed using principal component analysis. For each bone segment, a statistical shape model and principal components were created, describing population shape variation. Statistical shape models were validated by assessing reconstruction accuracy in a leave-one-out cross validation. Statistical shape models were created by excluding a participant’s bone segment and used to reconstruct that same excluded bone using full segmentations and sparse anatomical data (i.e. three discrete points on each segment), for all combinations in the dataset. Tali were not reconstructed using sparse anatomical data due to a lack of externally accessible landmarks. Reconstruction accuracy was assessed using Jaccard index, root mean square error (mm), and Hausdorff distance (mm). Results: Reconstructions generated using full segmentations had mean Jaccard indices between 0.77 ± 0.04 and 0.89 ± 0.02, mean root mean square errors between 0.88 ± 0.19 and 1.17 ± 0.18 mm, and mean Hausdorff distances between 2.99 ± 0.98 mm and 6.63 ± 3.68 mm. Reconstructions generated using sparse anatomical data had mean Jaccard indices between 0.67 ± 0.06 and 0.83 ± 0.05, mean root mean square error between 1.21 ± 0.54 mm and 1.66 ± 0.41 mm, and mean Hausdorff distances between 3.21 ± 0.94 mm and 7.19 ± 3.54 mm. Jaccard index was higher (P < 0.01) and root mean square error was lower (P < 0.01) in reconstructions from full segmentations compared to sparse anatomical data. Hausdorff distance was lower (P < 0.01) for midfoot and calcaneus reconstructions using full segmentations compared to sparse anatomical data. Conclusion: For the first time, statistical shape models of the primary functional segments of the foot were developed and validated. Foot segments can be reconstructed with minimal error using full segmentations and sparse anatomical landmarks. In future, larger training datasets could increase statistical shape model robustness, extending use to paediatric or pathological populations.


  • Magnetic Resonance Imaging and Freehand 3-D Ultrasound Provide Similar Estimates of Free Achilles Tendon Shape and 3-D Geometry

    by Daniel Devaprakash, David G. Lloyd, Rod S. Barrett, Steven J. Obst, Ben Kennedy, Kahlee L. Adams, Adam Hunter, Nicole Vlahovich, David L. Pease, Claudio Pizzolato


  • Is conservation of center of mass mechanics a priority in human walking? Insights from leg-length asymmetry experiments

    by Kirsty A. McDonald, Daniel Devaprakash, Jonas Rubenson

    Center of mass (COM) control has been proposed to serve economy- and stability-related locomotor task objectives. However, given the lack of evidence supporting direct sensing and/or regulation of the COM, it remains unclear whether COM mechanics are prioritized in the control scheme of walking. We posit that peripheral musculoskeletal structures, e.g., muscle, are more realistic control targets than the COM, given their abundance of sensorimotor receptors, and ability to influence whole-body energetics. As a first test of this hypothesis we examined whether conservation of stance phase joint mechanics is prioritized over COM mechanics in a locomotor task where simultaneous conservation of COM and joint mechanics is not feasible; imposed leg-length asymmetry. Positive joint mechanical cost of transport (work per distance traveled; COTJNT) was maintained at values closer to normal walking than COM mechanical cost of transport (COTCOM; pCOM, COM displacement), joint-level variables (COTJNT, integrated total support moment) also displayed stronger conservation (less change from normal walking) when the participants’ self-selected gait was assessed against other possible gait solutions. We conclude that when walking humans are exposed to an asymmetric leg-length perturbation, control of joint mechanics is prioritized over COM mechanics. Our results suggest that mechanical and metabolic effort is likely regulated via control of peripheral structures and not directly at the level of the COM. Joint mechanics may provide a more accurate representation of underlying locomotor control targets and may prove advantageous in informing predictive models of human walking.