KSKunal Soni

Kunal Soni

*This is an algorithmically generated author record based on publicly available information.

Kunal Soni has a total of 35 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Statistical time lags in streamer inception for CO 2 /O 2 /C 4 F 7 N gas mixtures

    by Kunal Soni, Martin Seeger

    This study presents an experimental investigation into the statistical time lags associated with streamer inception in a ternary gas mixture of carbon dioxide (CO 2 ), oxygen (O 2 ), and 3.5% perfluoroisobutyronitrile (C 4 F 7 N), a promising alternative to SF 6 for eco-friendly insulation. Experiments were performed using needle-plane (both polarities) and rod-plane (negative polarity) configurations over pressures from 0.01 to 0.1 MPa. Time-resolved diagnostics captured the delay between voltage application and discharge onset, revealing distinct statistical time lag distributions influenced by electrode geometry, polarity, and pressure. By comparing measured time lags with a semi‑empirical model for collisional electron detachment and cathode field emission, we show that an SF 6 ‑type E/E cr scaling accurately reproduces the detachment behavior when using the mixture’s lower critical field. These findings enhance the understanding of pre-breakdown behavior in alternative insulation gases and support the development of optimized gas mixtures for high-voltage applications.

  • Streamer parameters in CO 2 /O 2 /C 4 F 7 N gas mixture for application in high voltage switchgear

    by Kunal Soni, Martin Seeger, Ueli Straumann, Siddharth Kumar

    Gas mixture with CO 2 , O 2 and 3.5% C 4 F 7 N presents one of the most promising alternatives to SF 6 in high-voltage sub-transmission and transmission networks. It offers insulation properties similar to SF 6, while reducing the Global Warming Potential by a factor of 100 on the 100 year horizon. The dielectric properties of this gas mixture have, therefore, attracted considerable interest in recent years. The properties of streamer discharges in the CO 2 /O 2 /C 4 F 7 N gas mixture with 3.5% C 4 F 7 N are important in this regard since they determine the discharge inception and propagation, as well as the potential transition to a leader. In this study, we investigate the streamer inception and propagation at ambient temperature in the pressure range of 0.01–0.1 MPa, for both positive and negative polarities. Streamer parameters, i.e. the stability field, length and radius were obtained in uniform as well as strongly non-uniform background fields. These parameters enhance our understanding of streamer inception, propagation and streamer-to-leader transition in the CO 2 /O 2 /C 4 F 7 N gas mixture.


  • Open Access

    Plasma sputtering of biased electrodes in an oblique magnetic field

    by Paul Hiret, Kunal Soni, Anil Cherukulappurath Mana, Eric Faudot, Lucas Moser, Roland Steiner, Alessandro Geraldini, Stefano Alberti, Ivo Furno, Jérôme Moritz, et al.

    The surface erosion of biased electrodes immersed in a radio frequency (RF) plasma was investigated in oblique magnetic fields ranging from 0.1 T to 3.5 T. The plasma potential and density in the vicinity of the biased electrode have been measured using an RF-compensated cylindrical Langmuir probe moved by a three-dimensional motorised arm in the ALINE facility at 0.1 T. The erosion profiles were determined for different gases (argon and helium), magnetic field strength and plasma volume for the same electrode surface area at an angle of 5∘ with the magnetic field in three different experimental geometries. The radial electric field (perpendicular to the magnetic field) in the plasma column has been deduced from plasma potential measurements. This radial field makes the ions converge to the core of the plasma column at grazing angles ( < 30∘) and is reversed at larger angles. The ion flux on the sample increases with the magnetic field magnitude leading to a strong erosion inhomogeneity. At lower plasma volume, the erosion rate is sensitively enhanced. Local redeposition was identified using x-ray photoelectron spectroscopy on the surfaces exhibiting preferential deposition directions. Finally, the asymmetric erosion patterns obtained from a molybdenum layer etching are explained by the similar asymmetric density maps obtained with the probe and by the E → × B → drift and the local sheath acceleration.


  • Open Access

    Effect of 3 T magnetic field on RF plasma sputtering in an ITER-relevant first mirror unit

    by Kunal Soni, Santhosh Iyyakkunnel, Roland Steiner, Rodrigo Antunes, Lucas Moser, Oliver Bieri, Laurent Marot, Ernst Meyer

    The first mirror (FM) cleaning operations in ITER are expected to be executed in the presence of a ∼ 3 T magnetic field. In the RF plasma cleaning configuration, this would have a significant influence on the plasma properties, ion energy, angle of incidence as well as flux spatial distribution. To this end, RF discharges were excited in an ITER-sized mock-up of a first mirror unit (FMU) consisting of a powered first mirror M1 and a grounded second mirror M2 placed in a homogeneous 3 T magnetic field. The plasma discharge was confined in a beam extending in the direction of the magnetic field, consequently wetting a limited portion of the FMU walls. In the DC-decoupled scheme (without λ/4 filter), this considerably influenced the self-bias voltage V DC that develops on M1. Changing the angle α between M1 normal and magnetic field, modified the plasma wetted wall area A g and the resulting V DC varied by over two orders of magnitude. Plasma exposure experiments were also done in the DC-coupled scheme (with λ/4 filter), wherein the angle and wetted surface determined the area of wall sputtered. Increasing α led to an increase in the sputtered wall area A g, and consequently the wall deposition on grounded M2. However, in all the cases M1 was entirely clean with the exception of edge deposits in some. In contrast, both M1 and M2 are coated with wall deposits in the absence of a magnetic field and a similar plasma exposure. The results show that plasma cleaning with λ/4 filter in a 3 T magnetic field at ITER could potentially prevent the parasitic wall deposition on FMs. The results also highlight the importance of FM orientation in the magnetic field and the wetted area in the plasma cleaning in both the DC-coupled and decoupled schemes within the ITER diagnostic systems.


  • Open Access

    Ion flux–energy distributions across grounded grids in an RF plasma source with DC-grounded electrodes

    by Kunal Soni, Rodrigo Antunes, Roland Steiner, Lucas Moser, Laurent Marot, Ernst Meyer

    We present an experimental investigation of the ion flux–energy distribution functions (IFEDFs) obtained across grounded grids in an asymmetric capacitively coupled RF source using a helium discharge. The powered electrode in the RF source is DC-grounded via a λ/4 filter, which lifts its DC potential to zero. Grids of different dimensions (hole width, thickness, and geometric transparency) were used to confine the plasma, while the IFEDF of the ion beam departing the grid and reaching the reactor walls was studied using a retarding field energy analyser. The IFEDF obtained was double-peaked, indicating the presence of fast ions arriving from the plasma source, and cold ions generated upon charge exchange collisions between the fast ions and neutrals. The flux, as well as the peak energies of the two ion groups, depended significantly on the process parameters: RF power, He pressure, the distance between grids and walls, and the dimensions of the grids. The results indicate that confining plasma with grids can reduce the ion flux at the walls by over 60%, significantly lowering the wall sputtering rate. This was confirmed with a dedicated long-exposure plasma discharge with a gridded plasma reactor, wherein less than 1 nm of Cu deposition was found on the DC-grounded powered electrode, and the surface reflectivity was preserved to pristine values. In contrast, a similar experiment in a gridless reactor resulted in Cu deposition of 35 nm with a drastic drop in surface reflectivity. These studies are of great importance for the application of similar RF plasma sources with in-situ cleaning of diagnostic mirrors in fusion devices, as well as in a variety of plasma processing applications.


  • Open Access

    Deuterium plasma sputtering of mixed Be-W layers

    by Kunal Soni, Lucas Moser, Corneliu Porosnicu, Rodrigo Antunes, Rodrigo Arredondo, Paul Dinca, Roland Steiner, Laurent Marot, Ernst Meyer


  • Study of wall re-deposition on DC-grounded ITER-relevant mirrors with RF plasma in a first mirror unit

    by Kunal Soni, Roland Steiner, Rodrigo Antunes, Lucas Moser, Pavel Shigin, Roger Reichle, Laurent Marot, Ernst Meyer


  • Detecting Similar and Dissimilar Movement Patterns using Indoor Passive Localization

    by Kunal Soni, Syed Faraz Hasan, Mohammad Hossain Dehghan Shoat, Nazmul Siddique

    This paper covers passive localization of a device-free user such that the user is not involved in the positioning system. We use the so-called device-free passive localization approach to estimate the most likely movement pattern exhibited by a remote-controlled, passive robot while moving at a walking speed. Our estimation is based only on the changes in received signal strength as a result of the concerned movement patterns of the robot. This involves observation of physical movement of the robot within an indoor area covered by Wi-Fi signals and its resulting impact on the radio environment. We show that the movement patterns of a remotely controlled robot can be predicted from the signal features.

  • Open Access

    Experimental and numerical characterization of a radio-frequency plasma source with a DC-grounded electrode configuration using a quarter-wavelength filter

    by Kunal Soni, Lucas Moser, Zoltán Donkó, Peter Hartmann, Ihor Korolov, Rodrigo Antunes, Zoltan Juhasz, Roland Steiner, Laurent Marot, Ernst Meyer

    We present a combined experimental and numerical investigation of the plasma properties in an asymmetric capacitively coupled radio frequency plasma source using argon discharge. Besides driving the system in the conventional way, which results in a high negative self-bias voltage V DC due to the asymmetric configuration, we also connect a ‘quarter-wavelength filter’ to the powered electrode, which lifts its DC potential to zero. At the powered side of the plasma, we employ electrodes with conducting and insulating surfaces, as well as electrodes combining both in different proportions (‘hybrid electrodes’). Measurements are carried out for the plasma potential, the electron density and temperature in the bulk plasma, as well as for the flux-energy distribution of the ions at the grounded surface of the system. The nature of the surface of the powered electrode as well as the presence of the quarter-wavelength filter are found to highly influence the plasma potential, V p ‾ . For the electrode with a conducting surface V p ‾ ∼ 20 V and ∼150 V are found in the absence and the presence of the filter, respectively. For the electrode with an insulating surface, the self-bias voltage builds up directly at the plasma interface, thus the filter has no effect and a plasma potential of ∼20 V is found. For the electrodes with different conducting/insulating proportions of their surface, V p ‾ ranges between the above values. Particle-in-Cell/Monte Carlo Collisions calculations for identical conditions with hybrid electrodes predict double-peaked ion energy distribution at the powered electrode with peaks corresponding to e V p ‾ and e ( V p ‾ − V DC ) along with a lowering of the plasma potential (whencompared to wholly conducting electrode), a trend that is observed experimentally. These studies are of great importance for the application of similar plasma sources with in-situ cleaning of mirrors in fusion devices and the results can be extended to a variety of plasma processing applications.