Heba M. Abdel-Atty
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Heba M. Abdel-Atty has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Mohamed Abdelazim Mohamed
Department of Electronics and Communications Engineering, Faculty of Engineering, Mansoura University, Mansoura, Egypt
3 shared publications - Ahmed Hammad
Al-Isra University,Faculty of Information Technology,Department of Computer Science,Amman,Jordan
1 shared publication - Ahmed Salah
Port Said University
1 shared publication Emad El-Sayed
Department of Electrical Engineering, Faculty of Engineering, Port Said University, Port Said, Egypt
1 shared publicationEman A. Anowr
1 shared publication- Eman A. Anowr
Department of Electrical Engineering, Faculty of Engineering, Port Said University, Port Said, Egypt
1 shared publication
Latest Publications
- Open Access
- 16 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 58829-58842
Max-Min Rate Optimization in Hybrid Active-Passive RIS-Assisted MU-MISO Systems: A DDPG-Based Joint Beamforming Approach
Reconfigurable Intelligent Surfaces (RIS) have emerged as a pivotal technology for sixth-generation (6G) networks, offering the potential to transform the wireless environment into a programmable entity. However, purely passive surfaces suffer from double fading effect that severely attenuates reflected signals, whereas fully active architectures introduce prohibitive power consumption. This paper proposes a novel framework for enhancing user fairness in hybrid active-passive RIS-assisted multiuser MISO systems. The primary objective is to maximize the minimum user data rate, which is a non-convex optimization problem under a strict total power budget. To address the complex coupling between variables, we propose a deep reinforcement learning (DRL) approach based on the deep deterministic policy gradient (DDPG) algorithm. Unlike conventional alternating optimization (AO), which often results in suboptimal solutions owing to parameter decoupling, the proposed DRL agent learns a joint continuous control policy that captures the interdependencies between base station beamforming, RIS phase shifts, and active amplification gains. The simulation results demonstrate that the proposed method significantly outperforms the baseline benchmarks, including block coordinate ascent and successive convex approximations. Quantitatively, the framework achieves a 125% – 150% improvement in the minimum user rate while maintaining a lower total power consumption. These findings establish the hybrid RIS paradigm, combined with DRL, as a robust and energy-efficient solution for fairness-critical 6G services.
- 16 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 58829-58842
Open AccessMax-Min Rate Optimization in Hybrid Active-Passive RIS-Assisted MU-MISO Systems: A DDPG-Based Joint Beamforming Approach
Reconfigurable Intelligent Surfaces (RIS) have emerged as a pivotal technology for sixth-generation (6G) networks, offering the potential to transform the wireless environment into a programmable entity. However, purely passive surfaces suffer from double fading effect that severely attenuates reflected signals, whereas fully active architectures introduce prohibitive power consumption. This paper proposes a novel framework for enhancing user fairness in hybrid active-passive RIS-assisted multiuser MISO systems. The primary objective is to maximize the minimum user data rate, which is a non-convex optimization problem under a strict total power budget. To address the complex coupling between variables, we propose a deep reinforcement learning (DRL) approach based on the deep deterministic policy gradient (DDPG) algorithm. Unlike conventional alternating optimization (AO), which often results in suboptimal solutions owing to parameter decoupling, the proposed DRL agent learns a joint continuous control policy that captures the interdependencies between base station beamforming, RIS phase shifts, and active amplification gains. The simulation results demonstrate that the proposed method significantly outperforms the baseline benchmarks, including block coordinate ascent and successive convex approximations. Quantitatively, the framework achieves a 125% – 150% improvement in the minimum user rate while maintaining a lower total power consumption. These findings establish the hybrid RIS paradigm, combined with DRL, as a robust and energy-efficient solution for fairness-critical 6G services.
- Open Access
- 29 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 6, 7091-7108
F-IRAN: Performance Analysis of 6G Fog Intelligent Radio Access Network
The next generation of wireless systems—Sixth Generation (6G) and beyond—is expected to support ultra-massive connectivity through a dense composition of small-and micro-scale networks with high traffic loads. To address the resulting demands for network flexibility, low-latency access, and energy-aware operation, conventional Radio Access Network (RAN) architectures require fundamental redesign. This paper proposes a novel Fog-based Intelligent Radio Access Network (F-IRAN) architecture for 6G, integrating Artificial Intelligence (AI), Tiny Machine Learning (TinyML), and Fog Radio Access Network (F-RAN) concepts across diverse deployment scenarios with varying numbers of Intelligent Remote Radio Heads (IRRHs).The proposed F-IRAN framework is realized through two deployment strategies: a virtualization-based design that leverages distributed computing resources to reduce power consumption and enhance energy efficiency, and a hardware separation-based design that embeds lightweight TinyML models at the fog layer to accelerate processing and reduce execution latency. Simulation results confirm that both strategies outperform conventional F-RAN in key performance indicators. The separation-based approach achieves Energy Efficiency (EE) gains of up to 70% and latency reductions exceeding 36%, while the virtualization-based approach delivers over 50% improvement in EE along with consistent Spectral Efficiency (SE) performance, even under varying IRRH densities and a latency reduction of roughly 11%. Compared to centralized architectures such as Cloud RAN (C-RAN) and Heterogeneous Cloud RAN (H-CRAN), F-IRAN significantly reduces execution delay by offloading computation to the network edge and alleviating fronthaul bottlenecks. Furthermore, when evaluated against recent architectures such as Open RAN (O-RAN) and Virtualized RAN (V-RAN), the proposed architecture demonstrates lower energy consumption and latency by avoiding coordination and virtualization overhead. These findings validate F-IRAN as a scalable, low-latency, and energy-efficient solution for deployment in Beyond 5G (B5G) and 6G network environments.
- 29 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 6, 7091-7108
Open AccessF-IRAN: Performance Analysis of 6G Fog Intelligent Radio Access Network
The next generation of wireless systems—Sixth Generation (6G) and beyond—is expected to support ultra-massive connectivity through a dense composition of small-and micro-scale networks with high traffic loads. To address the resulting demands for network flexibility, low-latency access, and energy-aware operation, conventional Radio Access Network (RAN) architectures require fundamental redesign. This paper proposes a novel Fog-based Intelligent Radio Access Network (F-IRAN) architecture for 6G, integrating Artificial Intelligence (AI), Tiny Machine Learning (TinyML), and Fog Radio Access Network (F-RAN) concepts across diverse deployment scenarios with varying numbers of Intelligent Remote Radio Heads (IRRHs).The proposed F-IRAN framework is realized through two deployment strategies: a virtualization-based design that leverages distributed computing resources to reduce power consumption and enhance energy efficiency, and a hardware separation-based design that embeds lightweight TinyML models at the fog layer to accelerate processing and reduce execution latency. Simulation results confirm that both strategies outperform conventional F-RAN in key performance indicators. The separation-based approach achieves Energy Efficiency (EE) gains of up to 70% and latency reductions exceeding 36%, while the virtualization-based approach delivers over 50% improvement in EE along with consistent Spectral Efficiency (SE) performance, even under varying IRRH densities and a latency reduction of roughly 11%. Compared to centralized architectures such as Cloud RAN (C-RAN) and Heterogeneous Cloud RAN (H-CRAN), F-IRAN significantly reduces execution delay by offloading computation to the network edge and alleviating fronthaul bottlenecks. Furthermore, when evaluated against recent architectures such as Open RAN (O-RAN) and Virtualized RAN (V-RAN), the proposed architecture demonstrates lower energy consumption and latency by avoiding coordination and virtualization overhead. These findings validate F-IRAN as a scalable, low-latency, and energy-efficient solution for deployment in Beyond 5G (B5G) and 6G network environments.
- 21 February 2025
- Published by Springer Nature
- p. 111-123
Optimized Base Station Placement in WSNs: A Hybrid Adaptive Approach for Maximized Lifetime
- 21 February 2025
- Published by Springer Nature
- p. 111-123
Optimized Base Station Placement in WSNs: A Hybrid Adaptive Approach for Maximized Lifetime
- Open Access
- 7 November 2022
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 17 (11) , e0276940
Enhancement of the performance of wireless sensor networks using the multihop multiantenna power beacon path selection method in intelligent structures
Sensor nodes are the building blocks of wireless sensor networks (WSNs), which may gather, analyze, and transmit various types of information to a certain destination. Data collection and transmission to the destination are the main responsibilities of sensor nodes at specified time intervals. However, one of the biggest issues with WSNs is the creation of energy-efficient wireless network algorithms. In this paper, a multi-hop multi-antenna power beacon path selection (MMPS) protocol is proposed. The proposed approach consists of a source, a destination, relays, power beacons generating radio frequency (RF) signals for energy harvesting, and eavesdroppers. We used physical layer security associated with energy harvesting to protect data from eavesdroppers without requiring higher layer data encryption and enhance the energy consumption of wireless networks. The signal’s broadcast strength must be high enough to allow for energy harvesting while being low enough to prevent eavesdropping. The process continues until the data reaches the destination. Comparing the performance of MMPS with those of conventional methods, MMPS enhanced the wireless network outage probability (OP) up to 99.7%, life time, energy consumption, protection from eavesdroppers, and more resistant to hardware impairments which increased the immunity up to 95%.
- 7 November 2022
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 17 (11) , e0276940
Open AccessEnhancement of the performance of wireless sensor networks using the multihop multiantenna power beacon path selection method in intelligent structures
Sensor nodes are the building blocks of wireless sensor networks (WSNs), which may gather, analyze, and transmit various types of information to a certain destination. Data collection and transmission to the destination are the main responsibilities of sensor nodes at specified time intervals. However, one of the biggest issues with WSNs is the creation of energy-efficient wireless network algorithms. In this paper, a multi-hop multi-antenna power beacon path selection (MMPS) protocol is proposed. The proposed approach consists of a source, a destination, relays, power beacons generating radio frequency (RF) signals for energy harvesting, and eavesdroppers. We used physical layer security associated with energy harvesting to protect data from eavesdroppers without requiring higher layer data encryption and enhance the energy consumption of wireless networks. The signal’s broadcast strength must be high enough to allow for energy harvesting while being low enough to prevent eavesdropping. The process continues until the data reaches the destination. Comparing the performance of MMPS with those of conventional methods, MMPS enhanced the wireless network outage probability (OP) up to 99.7%, life time, energy consumption, protection from eavesdroppers, and more resistant to hardware impairments which increased the immunity up to 95%.
- Open Access
- 23 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 106195-106203
Performance Analysis of Fog-Based Radio Access Networks
For the new generation of cellular networks, new architectures are being examined to improve performance. Fog communication is a new paradigm that has been presented to exploit the power of edge computing in regards to throughput and latency. In this paper, we introduce a mathematical model to examine the performance of such proposals. Specifically, the delay, power consumption (PC) and energy efficiency (EE) of fog radio access networks (F-RANs) are tested in comparison with those of traditional cloud radio access networks (C-RANs). Although the literature has shown that F-RANs provide enhanced delay performance, this paper shows that they also consume a large amount of power, degrading their EE in comparison with their traditional cloud counterparts. However, the level of degradation depends on the number of deployed fog devices, which directly influence the PC. This paper also shows that improving the delay performance by using a fog architecture is not a straightforward process but rather requires particular care in terms of choosing the appropriate mode when placing/installing fog functions in fog devices.
- 23 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 106195-106203
Open AccessPerformance Analysis of Fog-Based Radio Access Networks
For the new generation of cellular networks, new architectures are being examined to improve performance. Fog communication is a new paradigm that has been presented to exploit the power of edge computing in regards to throughput and latency. In this paper, we introduce a mathematical model to examine the performance of such proposals. Specifically, the delay, power consumption (PC) and energy efficiency (EE) of fog radio access networks (F-RANs) are tested in comparison with those of traditional cloud radio access networks (C-RANs). Although the literature has shown that F-RANs provide enhanced delay performance, this paper shows that they also consume a large amount of power, degrading their EE in comparison with their traditional cloud counterparts. However, the level of degradation depends on the number of deployed fog devices, which directly influence the PC. This paper also shows that improving the delay performance by using a fog architecture is not a straightforward process but rather requires particular care in terms of choosing the appropriate mode when placing/installing fog functions in fog devices.
- 1 April 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 661-668
Performance simulation of IEEE 802.16e WiMAX physical layer
Hardware implementation of WiMAX systems using field programmable gate array (FPGA) technology is a very important task for mobile communication and wireless network researchers. As a first step, a careful simulation of the system performance has been done using the simulation link platform of matlab_2009. The performance of the simulated system was evaluated using the bit-error-rate (BER). In this part; we have discussed different algorithms of the orthogonal frequency division multiplexing (OFDM), as well as the WiMAX physical layer based on the IEEE 802.16e standard under different combinations of digital modulation schemes and different communication channels. The simulation results show that adaptive modulation achieves similar spectral efficiency with better energy efficiency. When channel conditions are poor, energy efficient schemes such as BPSK or QPSK were used. As channel quality improves, higher M-ary modulation schemes such as16-QAM or 64-QAM was used.
- 1 April 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 661-668
Performance simulation of IEEE 802.16e WiMAX physical layer
Hardware implementation of WiMAX systems using field programmable gate array (FPGA) technology is a very important task for mobile communication and wireless network researchers. As a first step, a careful simulation of the system performance has been done using the simulation link platform of matlab_2009. The performance of the simulated system was evaluated using the bit-error-rate (BER). In this part; we have discussed different algorithms of the orthogonal frequency division multiplexing (OFDM), as well as the WiMAX physical layer based on the IEEE 802.16e standard under different combinations of digital modulation schemes and different communication channels. The simulation results show that adaptive modulation achieves similar spectral efficiency with better energy efficiency. When channel conditions are poor, energy efficient schemes such as BPSK or QPSK were used. As channel quality improves, higher M-ary modulation schemes such as16-QAM or 64-QAM was used.