Ulrich Mießner
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Ulrich Mießner has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Thorben Helmers
Department of Environmental Process Engineering (UVT), University of Bremen, Bremen, Germany
11 shared publications - Jorg Thöming
Chemical Process Engineering, University of Bremen, Bremen, Germany
5 shared publications - Philip Kemper
Department of Chemical Process Engineering, University of Bremen, Bremen, Germany
5 shared publications - Ralph Lindken
Bochum University of Applied Sciences
5 shared publications - Jerry Westerweel
Delft University of Technology
4 shared publications Ulf Daniel Kück
4 shared publications
Latest Publications
- Open Access
- 11 March 2026
- Published by Elsevier in Bioresource Technology
- Vol. 449, 134413
Long-term impact of flat-plate architectures on the performance of microbial electrolysis cells
- 11 March 2026
- Published by Elsevier in Bioresource Technology
- Vol. 449, 134413
Open AccessLong-term impact of flat-plate architectures on the performance of microbial electrolysis cells
- Open Access
- 10 December 2021
- Published by Springer Nature in Experiments in Fluids
- Vol. 63 (1) , 1-24
The flow topology transition of liquid–liquid Taylor flows in square microchannels
This work investigates the change of the flow topology of Taylor flow and qualitatively relates it to the excess velocity. Ensemble-averaged 3D2C- $$\upmu$$ PIV measurements simultaneously resolve the flow field inside and outside the droplets of a liquid–liquid Taylor flow that moves through a rectangular horizontal microchannel. While maintaining a constant Capillary number Ca = 0.005, the Reynolds number ( $$0.52 \le {\text{Re}} \le 2.14$$ ), the viscosity ratio ( $$0.24 \le \lambda \le 2.67$$ ) and surfactant concentrations of sodium dodecyl sulfate (0–3 CMC) are varied. We experimentally identified the product of the Reynolds number Re and the viscosity ratio $$\lambda$$ to indicate the momentum transport from the continuous phase (slugs) into the droplets (plugs). The position and size of the droplet’s main vortex core as well as the flow topology in the cross section of this vortex core changed with increased momentum transfer. Further, we found that the relative velocity of the Taylor droplet correlates negatively with the evoked topology change. A correlation is proposed to describe the effect quantitatively. Graphical abstract- 10 December 2021
- Published by Springer Nature in Experiments in Fluids
- Vol. 63 (1) , 1-24
Open AccessThe flow topology transition of liquid–liquid Taylor flows in square microchannels
This work investigates the change of the flow topology of Taylor flow and qualitatively relates it to the excess velocity. Ensemble-averaged 3D2C- $$\upmu$$ PIV measurements simultaneously resolve the flow field inside and outside the droplets of a liquid–liquid Taylor flow that moves through a rectangular horizontal microchannel. While maintaining a constant Capillary number Ca = 0.005, the Reynolds number ( $$0.52 \le {\text{Re}} \le 2.14$$ ), the viscosity ratio ( $$0.24 \le \lambda \le 2.67$$ ) and surfactant concentrations of sodium dodecyl sulfate (0–3 CMC) are varied. We experimentally identified the product of the Reynolds number Re and the viscosity ratio $$\lambda$$ to indicate the momentum transport from the continuous phase (slugs) into the droplets (plugs). The position and size of the droplet’s main vortex core as well as the flow topology in the cross section of this vortex core changed with increased momentum transfer. Further, we found that the relative velocity of the Taylor droplet correlates negatively with the evoked topology change. A correlation is proposed to describe the effect quantitatively. Graphical abstract - Open Access
- 31 March 2021
- Published by Springer Nature in Experiments in Fluids
- Vol. 62 (4) , 1-20
Reconstruction of the 3D pressure field and energy dissipation of a Taylor droplet from a $\upmu$PIV measurementIn this study, we reconstruct the 3D pressure field and derive the 3D contributions of the energy dissipation from a 3D3C velocity field measurement of Taylor droplets moving in a horizontal microchannel ( $$\rm Ca_c=0.0050$$ , $$\rm Re_c=0.0519$$ , $$\rm Bo=0.0043$$ , $$\lambda =\tfrac{\eta _{d}}{\eta _{c}}=2.625$$ ). We divide the pressure field in a wall-proximate part and a core-flow to describe the phenomenology. At the wall, the pressure decreases expectedly in downstream direction. In contrast, we find a reversed pressure gradient in the core of the flow that drives the bypass flow of continuous phase through the corners (gutters) and causes the Taylor droplet’s relative velocity between the faster droplet flow and the slower mean flow. Based on the pressure field, we quantify the driving pressure gradient of the bypass flow and verify a simple estimation method: the geometry of the gutter entrances delivers a Laplace pressure difference. As a direct measure for the viscous dissipation, we calculate the 3D distribution of work done on the flow elements, that is necessary to maintain the stationarity of the Taylor flow. The spatial integration of this distribution provides the overall dissipated energy and allows to identify and quantify different contributions from the individual fluid phases, from the wall-proximate layer and from the flow redirection due to presence of the droplet interface. For the first time, we provide deep insight into the 3D pressure field and the distribution of the energy dissipation in the Taylor flow based on experimentally acquired 3D3C velocity data. We provide the 3D pressure field of and the 3D distribution of work as supplementary material to enable a benchmark for CFD and numerical simulations. Graphical- 31 March 2021
- Published by Springer Nature in Experiments in Fluids
- Vol. 62 (4) , 1-20
Open AccessReconstruction of the 3D pressure field and energy dissipation of a Taylor droplet from a $\upmu$PIV measurementIn this study, we reconstruct the 3D pressure field and derive the 3D contributions of the energy dissipation from a 3D3C velocity field measurement of Taylor droplets moving in a horizontal microchannel ( $$\rm Ca_c=0.0050$$ , $$\rm Re_c=0.0519$$ , $$\rm Bo=0.0043$$ , $$\lambda =\tfrac{\eta _{d}}{\eta _{c}}=2.625$$ ). We divide the pressure field in a wall-proximate part and a core-flow to describe the phenomenology. At the wall, the pressure decreases expectedly in downstream direction. In contrast, we find a reversed pressure gradient in the core of the flow that drives the bypass flow of continuous phase through the corners (gutters) and causes the Taylor droplet’s relative velocity between the faster droplet flow and the slower mean flow. Based on the pressure field, we quantify the driving pressure gradient of the bypass flow and verify a simple estimation method: the geometry of the gutter entrances delivers a Laplace pressure difference. As a direct measure for the viscous dissipation, we calculate the 3D distribution of work done on the flow elements, that is necessary to maintain the stationarity of the Taylor flow. The spatial integration of this distribution provides the overall dissipated energy and allows to identify and quantify different contributions from the individual fluid phases, from the wall-proximate layer and from the flow redirection due to presence of the droplet interface. For the first time, we provide deep insight into the 3D pressure field and the distribution of the energy dissipation in the Taylor flow based on experimentally acquired 3D3C velocity data. We provide the 3D pressure field of and the 3D distribution of work as supplementary material to enable a benchmark for CFD and numerical simulations. Graphical - Open Access
- 4 May 2020
- Published by Springer Nature in Experiments in Fluids
- Vol. 61 (5) , 1-17
µPIV measurement of the 3D velocity distribution of Taylor droplets moving in a square horizontal channel
This paper presents a µPIV measurement of the 3D2C velocity distribution of Taylor droplets moving in a square horizontal microchannel at Ca $$_{\mathrm {c}} = 0.005$$ and Re $$_{\mathrm {c}} = 0.051$$ . We reconstruct the third velocity component and present an accuracy assessment of the reconstruction based on a volume flow balance of the 3D3C velocity field. The velocity field allows the investigation of the 3D flow features such as stagnation regions and the shear rate distribution. The maximum shear rate is located at the entrances and exits of the wall films and at the corner flow (gutter) bypassing the Taylor droplet. The regions of high strain correspond to the cap positions of the Taylor droplets. An experimental data set allows visualization of the streamlines of the velocity distribution on the interface of a Taylor droplet and to directly relate it to the main and secondary vortices of the droplet phase velocity field. The measurement data are provided as a digital resource for the validation of numerical simulation or further assessment. Graphic- 4 May 2020
- Published by Springer Nature in Experiments in Fluids
- Vol. 61 (5) , 1-17
Open AccessµPIV measurement of the 3D velocity distribution of Taylor droplets moving in a square horizontal channel
This paper presents a µPIV measurement of the 3D2C velocity distribution of Taylor droplets moving in a square horizontal microchannel at Ca $$_{\mathrm {c}} = 0.005$$ and Re $$_{\mathrm {c}} = 0.051$$ . We reconstruct the third velocity component and present an accuracy assessment of the reconstruction based on a volume flow balance of the 3D3C velocity field. The velocity field allows the investigation of the 3D flow features such as stagnation regions and the shear rate distribution. The maximum shear rate is located at the entrances and exits of the wall films and at the corner flow (gutter) bypassing the Taylor droplet. The regions of high strain correspond to the cap positions of the Taylor droplets. An experimental data set allows visualization of the streamlines of the velocity distribution on the interface of a Taylor droplet and to directly relate it to the main and secondary vortices of the droplet phase velocity field. The measurement data are provided as a digital resource for the validation of numerical simulation or further assessment. Graphic - Open Access
- 12 February 2020
- Published by Springer Nature in Experiments in Fluids
- Vol. 61 (2) , 1-17
Refractive index matching (RIM) using double-binary liquid–liquid mixtures
For using microscopic multiphase flows in microreactors, an exact understanding of the underlying hydrodynamic interrelations is key for successful reactor layout and reaction control. To examine the local hydrodynamic behavior, non-invasive optical measurements techniques like particle tracking velocimetry (PTV) or micro particle image velocimetry (µPIV) are the methods of choice, since they provide precise velocity measurement with excellent spatial resolution. Such optical approaches require refractive index matching (RIM) of the involved flow phases to prevent optical distortion due to light refraction and reflection at the interfaces. Established RIM approaches often provide a single degree of freedom, which is sufficient to solely match the refractive index (RI) of the flow phases. Using these approaches, the material properties (Oh number) are fixed and the relevant dimensionless numbers (Ca, Re) may only be altered hydrodynamically or geometrically. To avoid expansive geometric scaling of the microchannels, we propose an approach using two binary mixtures (double-binary mixtures) to introduce an additional degree of freedom. The approach allows examining liquid–liquid two-phase flows at a distinct velocity while being able to change the material properties (Oh number). Thus, Ca and Re can be chosen individually and the proposed RIM-approach provides undisturbed optical access. Furthermore, we present four different binary mixtures, which allow to vary the viscosity ratio of the phases. The relevant material parameters are successfully correlated to measurement data, which delivers a system of equations that determines the mass fractions and the velocities to address Re and Ca individually. A proof-of-principle for the proposed double- binary mixture RIM-approach is successfully established using µPIV raw images. Graphic
- 12 February 2020
- Published by Springer Nature in Experiments in Fluids
- Vol. 61 (2) , 1-17
Open AccessRefractive index matching (RIM) using double-binary liquid–liquid mixtures
For using microscopic multiphase flows in microreactors, an exact understanding of the underlying hydrodynamic interrelations is key for successful reactor layout and reaction control. To examine the local hydrodynamic behavior, non-invasive optical measurements techniques like particle tracking velocimetry (PTV) or micro particle image velocimetry (µPIV) are the methods of choice, since they provide precise velocity measurement with excellent spatial resolution. Such optical approaches require refractive index matching (RIM) of the involved flow phases to prevent optical distortion due to light refraction and reflection at the interfaces. Established RIM approaches often provide a single degree of freedom, which is sufficient to solely match the refractive index (RI) of the flow phases. Using these approaches, the material properties (Oh number) are fixed and the relevant dimensionless numbers (Ca, Re) may only be altered hydrodynamically or geometrically. To avoid expansive geometric scaling of the microchannels, we propose an approach using two binary mixtures (double-binary mixtures) to introduce an additional degree of freedom. The approach allows examining liquid–liquid two-phase flows at a distinct velocity while being able to change the material properties (Oh number). Thus, Ca and Re can be chosen individually and the proposed RIM-approach provides undisturbed optical access. Furthermore, we present four different binary mixtures, which allow to vary the viscosity ratio of the phases. The relevant material parameters are successfully correlated to measurement data, which delivers a system of equations that determines the mass fractions and the velocities to address Re and Ca individually. A proof-of-principle for the proposed double- binary mixture RIM-approach is successfully established using µPIV raw images. Graphic
- Open Access
Modeling the Excess Velocity of Low-Viscous Taylor Droplets in Square Microchannels
Microscopic multiphase flows have gained broad interest due to their capability to transfer processes into new operational windows and achieving significant process intensification. However, the hydrodynamic behavior of Taylor droplets is not yet entirely understood. In this work, we introduce a model to determine the excess velocity of Taylor droplets in square microchannels. This velocity difference between the droplet and the total superficial velocity of the flow has a direct influence on the droplet residence time and is linked to the pressure drop. Since the droplet does not occupy the entire channel cross-section, it enables the continuous phase to bypass the droplet through the corners. A consideration of the continuity equation generally relates the excess velocity to the mean flow velocity. We base the quantification of the bypass flow on a correlation for the droplet cap deformation from its static shape. The cap deformation reveals the forces of the flowing liquids exerted onto the interface and allows estimating the local driving pressure gradient for the bypass flow. The characterizing parameters are identified as the bypass length, the wall film thickness, the viscosity ratio between both phases and the number. The proposed model is adapted with a stochastic, metaheuristic optimization approach based on genetic algorithms. In addition, our model was successfully verified with high-speed camera measurements and published empirical data.Open AccessModeling the Excess Velocity of Low-Viscous Taylor Droplets in Square Microchannels
Microscopic multiphase flows have gained broad interest due to their capability to transfer processes into new operational windows and achieving significant process intensification. However, the hydrodynamic behavior of Taylor droplets is not yet entirely understood. In this work, we introduce a model to determine the excess velocity of Taylor droplets in square microchannels. This velocity difference between the droplet and the total superficial velocity of the flow has a direct influence on the droplet residence time and is linked to the pressure drop. Since the droplet does not occupy the entire channel cross-section, it enables the continuous phase to bypass the droplet through the corners. A consideration of the continuity equation generally relates the excess velocity to the mean flow velocity. We base the quantification of the bypass flow on a correlation for the droplet cap deformation from its static shape. The cap deformation reveals the forces of the flowing liquids exerted onto the interface and allows estimating the local driving pressure gradient for the bypass flow. The characterizing parameters are identified as the bypass length, the wall film thickness, the viscosity ratio between both phases and the number. The proposed model is adapted with a stochastic, metaheuristic optimization approach based on genetic algorithms. In addition, our model was successfully verified with high-speed camera measurements and published empirical data. - 18 June 2019
- Published by Springer Nature in Experiments in Fluids
- Vol. 60 (7) , 113
Determining the flow-related cap deformation of Taylor droplets at low Ca numbers using ensemble-averaged high-speed images
- 18 June 2019
- Published by Springer Nature in Experiments in Fluids
- Vol. 60 (7) , 113
Determining the flow-related cap deformation of Taylor droplets at low Ca numbers using ensemble-averaged high-speed images
- 31 May 2019
- Published by Springer Nature in Experiments in Fluids
- Vol. 60 (6) , 105
Correction to: An analytical interface shape approximation of microscopic Taylor flows
- 31 May 2019
- Published by Springer Nature in Experiments in Fluids
- Vol. 60 (6) , 105
Correction to: An analytical interface shape approximation of microscopic Taylor flows
- Open Access
Refractive index matching (RIM) using double-binary liquid-liquid mixtures
Within the last decade microscopic multiphase flows have gained broad interest. An exact understanding of the underlying hydrodynamic interrelations is the key for successful reactor layout and reaction control. To examine the local hydrodynamic behavior, non-invasive optical measurements techniques like particle tracking velocimetry (PTV) or (micro)particle image velocimetry ((\textmu)PIV) are the method of choice, since they provide precise velocity measurement with excellent spatial resolution. Such optical approaches require refractive index matching (RIM) of the involved flow phases to prevent optical distortion due to light refraction and reflection at the interfaces. Established RIM approaches often provide a single one degree of freedom which is sufficient to match the RI of the flow phases solely. With that, the material properties ($Oh$ number) are fixed and the relevant dimensionless numbers ($Ca$, $Re$) may only be altered hydrodynamically or geometrically. To avoid expansive geometric scaling of the microchannels, we propose an approach using two binary mixtures (double-binary mixtures) to introduce an additional degree of freedom. The approach allows examining liquid-liquid two-phase flows at a distinct velocity while being able to change the material combination ($Oh$-Number). Therefore $Ca$ and $Re$ can be chosen individually and the RIM provides undisturbed optical access. We present 4 different binary mixtures to be used, e.g. with Taylor droplets. The relevant material parameters are successfully correlated to measurement data, which delivers a system of equations that determines the mass fractions and the velocities to address $Re$ and $Ca$ individually. A proof-of-principle for the proposed double binary mixture RIM-approach is successfully established using \textmu PIV raw images.Open AccessRefractive index matching (RIM) using double-binary liquid-liquid mixtures
Within the last decade microscopic multiphase flows have gained broad interest. An exact understanding of the underlying hydrodynamic interrelations is the key for successful reactor layout and reaction control. To examine the local hydrodynamic behavior, non-invasive optical measurements techniques like particle tracking velocimetry (PTV) or (micro)particle image velocimetry ((\textmu)PIV) are the method of choice, since they provide precise velocity measurement with excellent spatial resolution. Such optical approaches require refractive index matching (RIM) of the involved flow phases to prevent optical distortion due to light refraction and reflection at the interfaces. Established RIM approaches often provide a single one degree of freedom which is sufficient to match the RI of the flow phases solely. With that, the material properties ($Oh$ number) are fixed and the relevant dimensionless numbers ($Ca$, $Re$) may only be altered hydrodynamically or geometrically. To avoid expansive geometric scaling of the microchannels, we propose an approach using two binary mixtures (double-binary mixtures) to introduce an additional degree of freedom. The approach allows examining liquid-liquid two-phase flows at a distinct velocity while being able to change the material combination ($Oh$-Number). Therefore $Ca$ and $Re$ can be chosen individually and the RIM provides undisturbed optical access. We present 4 different binary mixtures to be used, e.g. with Taylor droplets. The relevant material parameters are successfully correlated to measurement data, which delivers a system of equations that determines the mass fractions and the velocities to address $Re$ and $Ca$ individually. A proof-of-principle for the proposed double binary mixture RIM-approach is successfully established using \textmu PIV raw images. - 30 March 2019
- Published by Springer Nature in Experiments in Fluids
- Vol. 60 (4) , 75
An analytical interface shape approximation of microscopic Taylor flows
- 30 March 2019
- Published by Springer Nature in Experiments in Fluids
- Vol. 60 (4) , 75
An analytical interface shape approximation of microscopic Taylor flows