Thomas Heumueller
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Thomas Heumueller has a total of 245 co-authors. Here are the top co-authors by number of shared publications:
- Christoph Joseph Brabec
Institute of Materials for Electronics and Energy Technology (i‐MEET) Department of Materials Science and Engineering Friedrich‐Alexander‐Universität Erlangen‐Nürnberg Erlangen Germany
25 shared publications - Ning Li
Institute of Polymer Optoelectronic Materials & Devices Guangdong Basic Research Center of Excellence for Energy and Information Polymer Materials State Key Laboratory of Luminescent Materials & Devices South China University of Technology Guangzhou China
16 shared publications - Larry Lüer
Institute of Materials for Electronics and Energy Technology (i-MEET), Department of Materials Science and Engineering, Friedrich-Alexander-Universität Erlangen-Nürnberg, Martensstrasse 7, 91058 Erlangen, Germany
13 shared publications Chao Liu
Helmholtz‐Institute Erlangen‐Nürnberg for Renewable Energy (HI ERN) Erlangen Germany
11 shared publicationsChristoph J. Brabec
Institute of Materials for Electronics and Energy Technology (i-MEET), Friedrich-Alexander-Universität Erlangen-Nürnberg, 91058 Erlangen, Germany
11 shared publications- Zijian Peng
Institute of Materials for Electronics and Energy Technology (i-MEET), Friedrich-Alexander-Universität Erlangen-Nürnberg, 91058 Erlangen, Germany
8 shared publications
Latest Publications
- Open Access
- 26 October 2026
- Published by Royal Society of Chemistry (RSC) in EES Solar
- Vol. 2 (5) , 1163-1176
Bridging the lab-to-fab gap in non-fullerene organic solar cells via gravure printing
We report the first fully roll-to-roll compatible organic solar cell employing a gravure-printed non-fullerene acceptor active layer. Device loss channels are quantitatively identified, providing a roadmap for closing the lab-to-fab efficiency gap.
- 26 October 2026
- Published by Royal Society of Chemistry (RSC) in EES Solar
- Vol. 2 (5) , 1163-1176
Open AccessBridging the lab-to-fab gap in non-fullerene organic solar cells via gravure printing
We report the first fully roll-to-roll compatible organic solar cell employing a gravure-printed non-fullerene acceptor active layer. Device loss channels are quantitatively identified, providing a roadmap for closing the lab-to-fab efficiency gap.
- Open Access
- 22 September 2026
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 19 (18) , 6224-6235
Generalizing organic solar cell performance and stability to untested blends: a GPR framework based on deconvolved aggregation signatures
Predicting organic solar cell performance and stability via GPR and deconvolved aggregation signatures for untrained blends.
- 22 September 2026
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 19 (18) , 6224-6235
Open AccessGeneralizing organic solar cell performance and stability to untested blends: a GPR framework based on deconvolved aggregation signatures
Predicting organic solar cell performance and stability via GPR and deconvolved aggregation signatures for untrained blends.
- Open Access
- 24 June 2026
- Published by Royal Society of Chemistry (RSC) in EES Solar
- Vol. 2 (4) , 973-983
Degradation forecasting for accelerated lifetime studies of organic photovoltaics via symbolic regression
Symbolic-regression-assisted OPV lifetime forecasting enables accurate extrapolation from short early-time degradation data across diverse donor–acceptor systems and processing conditions.
- 24 June 2026
- Published by Royal Society of Chemistry (RSC) in EES Solar
- Vol. 2 (4) , 973-983
Open AccessDegradation forecasting for accelerated lifetime studies of organic photovoltaics via symbolic regression
Symbolic-regression-assisted OPV lifetime forecasting enables accurate extrapolation from short early-time degradation data across diverse donor–acceptor systems and processing conditions.
- Open Access
- 16 January 2026
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (11)
Accelerating the Development of Organic Solar Cells: A Standardized Protocol with Machine Learning Integration
Organic Photovoltaic (OPV) devices show a large gap between laboratory‐recorded cells with over 20% efficiency and commercial roll‐to‐roll printed modules reaching a maximum half that efficiency. A novel OPV material not only needs high efficiency, but must be processable in architectures suited for large‐scale applications and provide sufficient stability under various stress factors. We present a holistic screening protocol to cover all relevant aspects of OPV material development. Using machine learning techniques together with systematic experimental protocols, only a minimum amount of a novel semiconductor is necessary. We utilize process parameters, optical features, and IV data to explore the processing window, benchmark process stability, and enable structure‐property predictions. We implement a combinatorial degradation protocol that investigates key stress factors, like temperature, oxygen, and illumination, at different stages of device fabrication. Testing partially finished devices, conventional and inverted architectures, as well as hole‐only and electron‐only devices, enables the identification of individual layers responsible for degradation. The protocol includes a solvent test to investigate processability with green solvents. The systematic data collected in this protocol provides a general and reliable basis for material development and the imminent creation of digital twins for OPV.
- 16 January 2026
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (11)
Open AccessAccelerating the Development of Organic Solar Cells: A Standardized Protocol with Machine Learning Integration
Organic Photovoltaic (OPV) devices show a large gap between laboratory‐recorded cells with over 20% efficiency and commercial roll‐to‐roll printed modules reaching a maximum half that efficiency. A novel OPV material not only needs high efficiency, but must be processable in architectures suited for large‐scale applications and provide sufficient stability under various stress factors. We present a holistic screening protocol to cover all relevant aspects of OPV material development. Using machine learning techniques together with systematic experimental protocols, only a minimum amount of a novel semiconductor is necessary. We utilize process parameters, optical features, and IV data to explore the processing window, benchmark process stability, and enable structure‐property predictions. We implement a combinatorial degradation protocol that investigates key stress factors, like temperature, oxygen, and illumination, at different stages of device fabrication. Testing partially finished devices, conventional and inverted architectures, as well as hole‐only and electron‐only devices, enables the identification of individual layers responsible for degradation. The protocol includes a solvent test to investigate processability with green solvents. The systematic data collected in this protocol provides a general and reliable basis for material development and the imminent creation of digital twins for OPV.
- Open Access
- 19 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Degradation forecasting for accelerated lifetime studies in organic photovoltaics via symbolic regression
As the stability of organic solar cells improves, traditional long-duration testing methods cannot provide timely feedback, retarding optimization and hindering commercialization. Therefore, accurate degradation forecasting becomes a critical challenge, as the complex, nonlinear degradation kinetics of OPV devices complicate prediction. Here, we present a machine learning pipeline based on Class Symbolic Regression (CSR) that accurately extrapolates device degradation ~10× beyond the measured window, enabling day-scale stability decisions. Our workflow achieves 3-4% test error in quantitatively forecasting lifetime using the first 20 h for preliminary screening (200 h) and the first 100 h for long-term stability testing (1,000 h). This approach, validated across >40 donor–acceptor systems and >100 processing conditions, demonstrates generalization across key stability metrics. Additionally, the workflow is lightweight, requiring few resources and training, making it suitable for various OPV laboratories, thereby compressing OPV stability-testing protocols from month-scale to days. This work accelerates decision-making, enhances R&D throughput, and advances commercialization in the OPV industry.
- 19 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessDegradation forecasting for accelerated lifetime studies in organic photovoltaics via symbolic regression
As the stability of organic solar cells improves, traditional long-duration testing methods cannot provide timely feedback, retarding optimization and hindering commercialization. Therefore, accurate degradation forecasting becomes a critical challenge, as the complex, nonlinear degradation kinetics of OPV devices complicate prediction. Here, we present a machine learning pipeline based on Class Symbolic Regression (CSR) that accurately extrapolates device degradation ~10× beyond the measured window, enabling day-scale stability decisions. Our workflow achieves 3-4% test error in quantitatively forecasting lifetime using the first 20 h for preliminary screening (200 h) and the first 100 h for long-term stability testing (1,000 h). This approach, validated across >40 donor–acceptor systems and >100 processing conditions, demonstrates generalization across key stability metrics. Additionally, the workflow is lightweight, requiring few resources and training, making it suitable for various OPV laboratories, thereby compressing OPV stability-testing protocols from month-scale to days. This work accelerates decision-making, enhances R&D throughput, and advances commercialization in the OPV industry.
- Open Access
- 25 November 2025
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 19 (4) , 1137-1147
A simultaneous synergistic protection mechanism in hybrid perovskite–organic multi-junctions enables long-term stable and efficient tandem solar cells
Monolithic perovskite–organic tandem solar cells (P–O TSCs) establish a mutual protection system, which enables high-efficiency P–O TSCs (25.12%) to achieve exceptional operational stability, retaining over 91% after 1000-hour illumination.
- 25 November 2025
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 19 (4) , 1137-1147
Open AccessA simultaneous synergistic protection mechanism in hybrid perovskite–organic multi-junctions enables long-term stable and efficient tandem solar cells
Monolithic perovskite–organic tandem solar cells (P–O TSCs) establish a mutual protection system, which enables high-efficiency P–O TSCs (25.12%) to achieve exceptional operational stability, retaining over 91% after 1000-hour illumination.
- Open Access
Improved ZnO Post‐Treatment for High Performance Organic Solar Cell Materials
Zinc oxide (ZnO) is a widely used electron transport layer for organic solar cells which has been optimized and established for the first generation of organic photovoltaic (OPV) materials. With the emergence of novel OPV materials which can reach up to 20% efficiency, several limitations of ZnO have become apparent. In particular, interactions of the active layer with ZnO under illumination can severely limit the device efficiency and stability. In this study, we investigate how various treatment options of ZnO like thermal annealing, ultraviolet exposure, as well as vacuum treatment can improve ZnO properties. Calcium tests show the release of reactive components form ZnO, and space charge limited current measurements allow to model energy level alignment using drift diffusion simulations. Crucially, permanent Jsc losses related to insufficient treatment of ZnO are observed for high performing material systems. An additional UV treatment step under vacuum is shown to significantly reduce those Jsc losses and allows using ZnO annealing temperatures of only 80°C.
Open AccessImproved ZnO Post‐Treatment for High Performance Organic Solar Cell Materials
Zinc oxide (ZnO) is a widely used electron transport layer for organic solar cells which has been optimized and established for the first generation of organic photovoltaic (OPV) materials. With the emergence of novel OPV materials which can reach up to 20% efficiency, several limitations of ZnO have become apparent. In particular, interactions of the active layer with ZnO under illumination can severely limit the device efficiency and stability. In this study, we investigate how various treatment options of ZnO like thermal annealing, ultraviolet exposure, as well as vacuum treatment can improve ZnO properties. Calcium tests show the release of reactive components form ZnO, and space charge limited current measurements allow to model energy level alignment using drift diffusion simulations. Crucially, permanent Jsc losses related to insufficient treatment of ZnO are observed for high performing material systems. An additional UV treatment step under vacuum is shown to significantly reduce those Jsc losses and allows using ZnO annealing temperatures of only 80°C.
- Open Access
- 31 July 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (32) , 46149-46160
Fine-Tuning Donor Material Deposition with Ultrasonic Aerosol Jet Printing to Balance Efficiency and Stability in Inverted Organic Photovoltaic Devices
The response surface methodology (RSM) based on a Box-Behnken (BB) design of experiment (DoE) approach was performed, with the central point repeated four times to enhance statistical reliability, to systematically investigate the influence of ultrasonic aerosol jet printing (uAJP) parameters such as speed, flow, and power, while depositing the donor material deposition, on the acceptor/donor ratio and power conversion efficiency (PCE). Efforts were made to tune the D:A ratio to approximately 1:1.2, a composition widely used for the PM6:Y12 active layer system. Despite the sequential deposition of the donor material onto the acceptor, the resulting active layer exhibited a bulk heterojunction (BHJ) morphology rather than a layer-by-layer (LbL) structure. Further analysis such as film-depth-dependent light absorption spectra (FLAS) and cross section of the electron energy-loss spectroscopy (EELS) in a scanning transmission electron microscope (STEM) or STEM-EELS was used to explore the interplay between deposition parameters and vertical blending behavior in the active layer. Finally, we evaluated the stability of these OPV devices under continuous one-sun illumination for 1080 h, revealing that the most efficient devices also exhibited the highest operational stability.
- 31 July 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (32) , 46149-46160
Open AccessFine-Tuning Donor Material Deposition with Ultrasonic Aerosol Jet Printing to Balance Efficiency and Stability in Inverted Organic Photovoltaic Devices
The response surface methodology (RSM) based on a Box-Behnken (BB) design of experiment (DoE) approach was performed, with the central point repeated four times to enhance statistical reliability, to systematically investigate the influence of ultrasonic aerosol jet printing (uAJP) parameters such as speed, flow, and power, while depositing the donor material deposition, on the acceptor/donor ratio and power conversion efficiency (PCE). Efforts were made to tune the D:A ratio to approximately 1:1.2, a composition widely used for the PM6:Y12 active layer system. Despite the sequential deposition of the donor material onto the acceptor, the resulting active layer exhibited a bulk heterojunction (BHJ) morphology rather than a layer-by-layer (LbL) structure. Further analysis such as film-depth-dependent light absorption spectra (FLAS) and cross section of the electron energy-loss spectroscopy (EELS) in a scanning transmission electron microscope (STEM) or STEM-EELS was used to explore the interplay between deposition parameters and vertical blending behavior in the active layer. Finally, we evaluated the stability of these OPV devices under continuous one-sun illumination for 1080 h, revealing that the most efficient devices also exhibited the highest operational stability.
- Open Access
- 26 June 2025
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
Anchoring ligand engineering enables highly stable MA-free perovskite solar cells with a minimal VOC deficit of 0.32 V
Ligand engineering is an effective method to reduce defects in perovskite solar cells (PSCs) and to enhance efficiency.
- 26 June 2025
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
Open AccessAnchoring ligand engineering enables highly stable MA-free perovskite solar cells with a minimal VOC deficit of 0.32 V
Ligand engineering is an effective method to reduce defects in perovskite solar cells (PSCs) and to enhance efficiency.
- Open Access
- 12 March 2025
- Published by American Chemical Society (ACS) in ChemRxiv
DeepDeg: Forecasting and explaining degradation in novel photovoltaics
Degradation is a technical and market hurdle in the development of novel photovoltaics and other energy devices. Understanding and addressing degradation requires complex, time-consuming measurements on multiple samples. To address this challenge, we present \textit{DeepDeg}, a machine learning model that combines deep learning, explainable machine learning, and physical modeling to: 1) forecast hundreds of hours of degradation, and 2) explain degradation in novel photovoltaics. Using a large and diverse dataset of over 785 stability tests of organic solar cells, totaling 230,000 measurement hours, DeepDeg is able to accurately predict degradation dynamics and explain the physiochemical factors driving them using few initial hours of degradation. We use cross-validation and a held-out dataset of over 9,000 hours of degradation of PCE10:OIDTBR to evaluate our model. We demonstrate that by using DeepDeg, degradation characterization and screening can be accelerated by 5-20x.
- 12 March 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessDeepDeg: Forecasting and explaining degradation in novel photovoltaics
Degradation is a technical and market hurdle in the development of novel photovoltaics and other energy devices. Understanding and addressing degradation requires complex, time-consuming measurements on multiple samples. To address this challenge, we present \textit{DeepDeg}, a machine learning model that combines deep learning, explainable machine learning, and physical modeling to: 1) forecast hundreds of hours of degradation, and 2) explain degradation in novel photovoltaics. Using a large and diverse dataset of over 785 stability tests of organic solar cells, totaling 230,000 measurement hours, DeepDeg is able to accurately predict degradation dynamics and explain the physiochemical factors driving them using few initial hours of degradation. We use cross-validation and a held-out dataset of over 9,000 hours of degradation of PCE10:OIDTBR to evaluate our model. We demonstrate that by using DeepDeg, degradation characterization and screening can be accelerated by 5-20x.