Zhaslan Baraissov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zhaslan Baraissov has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
- Utkur Mirsaidov
Department of Physics, National University of Singapore, Singapore, 117551, Singapore
8 shared publications - See Wee Chee
Department of Interface Science, Fritz Haber Institute of the Max Planck Society, Faradayweg 4-6, Berlin 14195, Germany
5 shared publications - Zeming Sun
Cornell Laboratory for Accelerator-Based Sciences and Education, Cornell University 1 , Ithaca, New York 14853, USA
3 shared publications David A Muller
Cornell Univ, Sch Appl & Engn Phys, Ithaca, NY 14853 USA
2 shared publications- David Anthony Muller
Cornell University
2 shared publications - Federico Panciera
Centre de Nanosciences et de Nanotechnologies
2 shared publications
Latest Publications
- Open Access
- 1 November 2025
- Published by AIP Publishing in APL Materials
- Vol. 13 (11)
Low barrier ZrO x -based Josephson junctions
The Josephson junction is a crucial element in superconducting devices, and niobium is a promising candidate for the superconducting material due to its large energy gap relative to aluminum. AlOx has long been regarded as the highest quality oxide tunnel barrier and is often used in niobium-based junctions. Here, we propose ZrOx as an alternative tunnel barrier material for Nb electrodes. We theoretically estimate that zirconium oxide has excellent oxygen retention properties and experimentally verify that there is no significant oxygen diffusion leading to NbOx formation in the adjacent Nb electrode. We develop a top–down, subtractive fabrication process for Nb/Zr–ZrOx/Nb Josephson junctions, which enables scalability and large-scale production of superconducting electronics. Using cross-sectional scanning transmission electron microscopy, we experimentally find that depending on the Zr thickness, ZrOx tunnel barriers can be fully crystalline with chemically abrupt interfaces with niobium. Further analysis using electron energy loss spectroscopy reveals that ZrOx corresponds to tetragonal ZrO2. Room temperature characterization of fabricated junctions using Simmons’ model shows that ZrO2 exhibits a low tunnel barrier height, which is promising in merged-element transmon applications. Low temperature transport measurements reveal sub-gap structure, while the low-voltage sub-gap resistance remains in the megaohm range.
- 1 November 2025
- Published by AIP Publishing in APL Materials
- Vol. 13 (11)
Open AccessLow barrier ZrO x -based Josephson junctions
The Josephson junction is a crucial element in superconducting devices, and niobium is a promising candidate for the superconducting material due to its large energy gap relative to aluminum. AlOx has long been regarded as the highest quality oxide tunnel barrier and is often used in niobium-based junctions. Here, we propose ZrOx as an alternative tunnel barrier material for Nb electrodes. We theoretically estimate that zirconium oxide has excellent oxygen retention properties and experimentally verify that there is no significant oxygen diffusion leading to NbOx formation in the adjacent Nb electrode. We develop a top–down, subtractive fabrication process for Nb/Zr–ZrOx/Nb Josephson junctions, which enables scalability and large-scale production of superconducting electronics. Using cross-sectional scanning transmission electron microscopy, we experimentally find that depending on the Zr thickness, ZrOx tunnel barriers can be fully crystalline with chemically abrupt interfaces with niobium. Further analysis using electron energy loss spectroscopy reveals that ZrOx corresponds to tetragonal ZrO2. Room temperature characterization of fabricated junctions using Simmons’ model shows that ZrO2 exhibits a low tunnel barrier height, which is promising in merged-element transmon applications. Low temperature transport measurements reveal sub-gap structure, while the low-voltage sub-gap resistance remains in the megaohm range.
- Open Access
Single-shot, coherent, pop-out 3D metrology
Three-dimensional (3D) imaging of thin, extended specimens at nanometer resolution is critical for applications in biology, materials science, advanced synthesis, and manufacturing. One route to 3D imaging is tomography, which requires a tilt series of a local region. Here we describe a coherent imaging alternative that recovers the 3D volume of a thin, homogeneously amorphous specimen with only a single, energy-filtered, bright-field image. We demonstrated this technique with a transmission electron microscope to fill a glaring gap for rapid, accessible, non-destructive 3D nanometrology. This technique is applicable, in general, to any coherent bright field imaging with electrons, photons, or any other wavelike particles.
Open AccessSingle-shot, coherent, pop-out 3D metrology
Three-dimensional (3D) imaging of thin, extended specimens at nanometer resolution is critical for applications in biology, materials science, advanced synthesis, and manufacturing. One route to 3D imaging is tomography, which requires a tilt series of a local region. Here we describe a coherent imaging alternative that recovers the 3D volume of a thin, homogeneously amorphous specimen with only a single, energy-filtered, bright-field image. We demonstrated this technique with a transmission electron microscope to fill a glaring gap for rapid, accessible, non-destructive 3D nanometrology. This technique is applicable, in general, to any coherent bright field imaging with electrons, photons, or any other wavelike particles.
- Open Access
- 11 October 2023
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 36 (11) , 115030
Surface oxides, carbides, and impurities on RF superconducting Nb and Nb3Sn: a comprehensive analysis
Surface structures on radio-frequency (RF) superconductors are crucially important in determining their interaction with the RF field. Here we investigate the surface compositions, structural profiles, and valence distributions of oxides, carbides, and impurities on niobium (Nb) and niobium–tin (Nb3Sn) in situ under different processing conditions. We establish the underlying mechanisms of vacuum baking and nitrogen processing in Nb and demonstrate that carbide formation induced during high-temperature baking, regardless of gas environment, determines subsequent oxide formation upon air exposure or low-temperature baking, leading to modifications of the electron population profile. Our findings support the combined contribution of surface oxides and second-phase formation to the outcome of ultra-high vacuum baking (oxygen processing) and nitrogen processing. Also, we observe that vapor-diffused Nb3Sn contains thick metastable oxides, while electrochemically synthesized Nb3Sn only has a thin oxide layer. Our findings reveal fundamental mechanisms of baking and processing Nb and Nb3Sn surface structures for high-performance superconducting RF and quantum applications.
- 11 October 2023
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 36 (11) , 115030
Open AccessSurface oxides, carbides, and impurities on RF superconducting Nb and Nb3Sn: a comprehensive analysis
Surface structures on radio-frequency (RF) superconductors are crucially important in determining their interaction with the RF field. Here we investigate the surface compositions, structural profiles, and valence distributions of oxides, carbides, and impurities on niobium (Nb) and niobium–tin (Nb3Sn) in situ under different processing conditions. We establish the underlying mechanisms of vacuum baking and nitrogen processing in Nb and demonstrate that carbide formation induced during high-temperature baking, regardless of gas environment, determines subsequent oxide formation upon air exposure or low-temperature baking, leading to modifications of the electron population profile. Our findings support the combined contribution of surface oxides and second-phase formation to the outcome of ultra-high vacuum baking (oxygen processing) and nitrogen processing. Also, we observe that vapor-diffused Nb3Sn contains thick metastable oxides, while electrochemically synthesized Nb3Sn only has a thin oxide layer. Our findings reveal fundamental mechanisms of baking and processing Nb and Nb3Sn surface structures for high-performance superconducting RF and quantum applications.
- Open Access
- 13 September 2023
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 36 (11) , 115003
Smooth, homogeneous, high-purity Nb3Sn superconducting RF resonant cavity by seed-free electrochemical synthesis
Workbench-size particle accelerators, enabled by Nb3Sn-based superconducting radio-frequency (SRF) cavities, hold the potential of driving scientific discovery by offering a widely accessible and affordable source of high-energy electrons and x-rays. Thin-film Nb3Sn RF superconductors with high quality factors, high operation temperatures, and high-field potentials are critical for these devices. However, surface roughness, non-stoichiometry, and impurities in Nb3Sn deposited by conventional Sn-vapor diffusion prevent them from reaching their theoretical capabilities. Here we demonstrate a seed-free electrochemical synthesis that pushes the limit of chemical and physical properties in Nb3Sn. Utilization of electrochemical Sn pre-deposits reduces the roughness of converted Nb3Sn by five times compared to typical vapor-diffused Nb3Sn. Quantitative mappings using chemical and atomic probes confirm improved stoichiometry and minimized impurity concentrations in electrochemically synthesized Nb3Sn. We have successfully applied this Nb3Sn to the large-scale 1.3 GHz SRF cavity and demonstrated ultra-low BCS surface resistances at multiple operation temperatures, notably lower than vapor-diffused cavities. Our smooth, homogeneous, high-purity Nb3Sn provides the route toward high efficiency and high fields for SRF applications under helium-free cryogenic operations.
- 13 September 2023
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 36 (11) , 115003
Open AccessSmooth, homogeneous, high-purity Nb3Sn superconducting RF resonant cavity by seed-free electrochemical synthesis
Workbench-size particle accelerators, enabled by Nb3Sn-based superconducting radio-frequency (SRF) cavities, hold the potential of driving scientific discovery by offering a widely accessible and affordable source of high-energy electrons and x-rays. Thin-film Nb3Sn RF superconductors with high quality factors, high operation temperatures, and high-field potentials are critical for these devices. However, surface roughness, non-stoichiometry, and impurities in Nb3Sn deposited by conventional Sn-vapor diffusion prevent them from reaching their theoretical capabilities. Here we demonstrate a seed-free electrochemical synthesis that pushes the limit of chemical and physical properties in Nb3Sn. Utilization of electrochemical Sn pre-deposits reduces the roughness of converted Nb3Sn by five times compared to typical vapor-diffused Nb3Sn. Quantitative mappings using chemical and atomic probes confirm improved stoichiometry and minimized impurity concentrations in electrochemically synthesized Nb3Sn. We have successfully applied this Nb3Sn to the large-scale 1.3 GHz SRF cavity and demonstrated ultra-low BCS surface resistances at multiple operation temperatures, notably lower than vapor-diffused cavities. Our smooth, homogeneous, high-purity Nb3Sn provides the route toward high efficiency and high fields for SRF applications under helium-free cryogenic operations.
- Open Access
- 1 July 2023
- Published by AIP Publishing in APL Materials
- Vol. 11 (7)
Thermodynamic route of Nb3Sn nucleation: Role of oxygen
Intermetallic Nb3Sn alloys have long been believed to form through Sn diffusion into Nb. However, our observations of significant oxygen content in Nb3Sn prompted an investigation of alternative formation mechanisms. Through experiments involving different oxide interfaces (clean HF-treated, native oxidized, and anodized), we demonstrate a thermodynamic route that fundamentally challenges the conventional Sn diffusion mechanism for Nb3Sn nucleation. Our results highlight the critical involvement of a SnOx intermediate phase. This new nucleation mechanism identifies the principles for growth optimization and new synthesis of high-quality Nb3Sn superconductors.
- 1 July 2023
- Published by AIP Publishing in APL Materials
- Vol. 11 (7)
Open AccessThermodynamic route of Nb3Sn nucleation: Role of oxygen
Intermetallic Nb3Sn alloys have long been believed to form through Sn diffusion into Nb. However, our observations of significant oxygen content in Nb3Sn prompted an investigation of alternative formation mechanisms. Through experiments involving different oxide interfaces (clean HF-treated, native oxidized, and anodized), we demonstrate a thermodynamic route that fundamentally challenges the conventional Sn diffusion mechanism for Nb3Sn nucleation. Our results highlight the critical involvement of a SnOx intermediate phase. This new nucleation mechanism identifies the principles for growth optimization and new synthesis of high-quality Nb3Sn superconductors.
- 18 March 2020
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 11 (7) , 2751-2758
Nanoscale Elastocapillary Effect Induced by Thin-Liquid-Film Instability
Dense arrays of high-aspect-ratio (HAR) vertical nanostructures are essential elements of microelectronic components, photovoltaics, nanoelectromechanical, and energy storage devices. One of the critical challenges in the nanofabrication of HAR nanostructures is to prevent their capillary-induced aggregation during solution-based nanofabrication processes. Despite the importance of controlling capillary effects, the detailed mechanisms of how a solution interacts with nanostructures are not well understood. Using in situ liquid cell transmission electron microscopy (TEM), we track the dynamics of nanoscale drying process of HAR Si nanopillars in real-time and identify a new mechanism responsible for pattern collapse and nanostructure aggregation. During drying, deflection and aggregation of nanopillars are driven by thin liquid-film instability, which results in much stronger capillary interactions between the nanopillars than the commonly proposed lateral meniscus interaction forces. The importance of thin-film instability in dewetting has been overlooked in prevalent theories on elastocapillary aggregation. The new dynamic mechanism revealed by in situ visualization is essential for the development of robust nanofabrication processes.
- 18 March 2020
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 11 (7) , 2751-2758
Nanoscale Elastocapillary Effect Induced by Thin-Liquid-Film Instability
Dense arrays of high-aspect-ratio (HAR) vertical nanostructures are essential elements of microelectronic components, photovoltaics, nanoelectromechanical, and energy storage devices. One of the critical challenges in the nanofabrication of HAR nanostructures is to prevent their capillary-induced aggregation during solution-based nanofabrication processes. Despite the importance of controlling capillary effects, the detailed mechanisms of how a solution interacts with nanostructures are not well understood. Using in situ liquid cell transmission electron microscopy (TEM), we track the dynamics of nanoscale drying process of HAR Si nanopillars in real-time and identify a new mechanism responsible for pattern collapse and nanostructure aggregation. During drying, deflection and aggregation of nanopillars are driven by thin liquid-film instability, which results in much stronger capillary interactions between the nanopillars than the commonly proposed lateral meniscus interaction forces. The importance of thin-film instability in dewetting has been overlooked in prevalent theories on elastocapillary aggregation. The new dynamic mechanism revealed by in situ visualization is essential for the development of robust nanofabrication processes.
- Top Cited Papers
- 6 February 2020
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 20 (3) , 1669-1675
Phase Selection in Self-catalyzed GaAs Nanowires
Crystal phase switching between the zincblende and wurtzite structures in III-V nanowires is crucial from the fundamental viewpoint as well as for electronic and photonic applications of crystal phase heterostructures. Here, the results of in situ monitoring of self-catalysed vapour-liquid-solid growth of GaAs nanowires by molecular beam epitaxy inside a transmission electron microscope is presented. It is demonstrated that the occurrence of the zincblende or wurtzite phase in self-catalysed nanowires is determined by the sole parameter, the droplet contact angle, which can be finely tuned by changing the group III and V fluxes. The zincblende phase forms at small (< 100o) and large (> 125o) contact angles, while pure wurtzite phase is observed for intermediate contact angles. Wurtzite nanowires are restricted by vertical sidewalls, while zincblende nanowires taper or develop the truncated edge at their top. These findings are explained within a dedicated model for the surface energetics. These results give a clear route for the crystal phase control in Au-free III-V nanowires. On a more general note, in situ growth monitoring with atomic resolution and at the technological-relavant growth rates is shown to be a powerful tool for the fine-tuning of material properties at the nanoscale.
- 6 February 2020
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 20 (3) , 1669-1675
Top Cited PapersPhase Selection in Self-catalyzed GaAs Nanowires
Crystal phase switching between the zincblende and wurtzite structures in III-V nanowires is crucial from the fundamental viewpoint as well as for electronic and photonic applications of crystal phase heterostructures. Here, the results of in situ monitoring of self-catalysed vapour-liquid-solid growth of GaAs nanowires by molecular beam epitaxy inside a transmission electron microscope is presented. It is demonstrated that the occurrence of the zincblende or wurtzite phase in self-catalysed nanowires is determined by the sole parameter, the droplet contact angle, which can be finely tuned by changing the group III and V fluxes. The zincblende phase forms at small (< 100o) and large (> 125o) contact angles, while pure wurtzite phase is observed for intermediate contact angles. Wurtzite nanowires are restricted by vertical sidewalls, while zincblende nanowires taper or develop the truncated edge at their top. These findings are explained within a dedicated model for the surface energetics. These results give a clear route for the crystal phase control in Au-free III-V nanowires. On a more general note, in situ growth monitoring with atomic resolution and at the technological-relavant growth rates is shown to be a powerful tool for the fine-tuning of material properties at the nanoscale.
- 18 September 2019
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 10 (20) , 6090-6096
Intermediate Structures of Pt–Ni Nanoparticles during Selective Chemical and Electrochemical Etching
Both chemical and electrochemical etching are effective methods for tailoring the surface composition of Pt-based catalytic bimetallic nanoparticles (NPs). However, the detailed nanoscale etching mechanisms, which are needed for achieving fine control over the etch processes, are still not understood. Here, we study selective chemical and electrochemical Ni etching of Pt–Ni rhombic dodecahedron NPs using in situ liquid-phase transmission electron microscopy. Our real-time observations show that the intermediate NP structures evolve differently in two cases. Chemical etching of Ni starts from localized pits on the NP surface, in contrast to the uniform dissolution of Ni during the electrochemical etching. Our study reveals how oxidative etching participates in the removal of non-noble metals and the formation of noble-metal-rich NPs. The mechanistic insights reported here highlight the role of a native surface oxide layer on the etching behavior, which is important for the design of NPs with specific surface composition for applications in electrocatalysis.
- 18 September 2019
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 10 (20) , 6090-6096
Intermediate Structures of Pt–Ni Nanoparticles during Selective Chemical and Electrochemical Etching
Both chemical and electrochemical etching are effective methods for tailoring the surface composition of Pt-based catalytic bimetallic nanoparticles (NPs). However, the detailed nanoscale etching mechanisms, which are needed for achieving fine control over the etch processes, are still not understood. Here, we study selective chemical and electrochemical Ni etching of Pt–Ni rhombic dodecahedron NPs using in situ liquid-phase transmission electron microscopy. Our real-time observations show that the intermediate NP structures evolve differently in two cases. Chemical etching of Ni starts from localized pits on the NP surface, in contrast to the uniform dissolution of Ni during the electrochemical etching. Our study reveals how oxidative etching participates in the removal of non-noble metals and the formation of noble-metal-rich NPs. The mechanistic insights reported here highlight the role of a native surface oxide layer on the etching behavior, which is important for the design of NPs with specific surface composition for applications in electrocatalysis.
- 16 September 2019
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 11 (40) , 36839-36846
Selective Wet Etching of Silicon Germanium in Composite Vertical Nanowires
Silicon Germanium (SixGe1-x or SiGe) is an important semiconductor material for the fabrication of nanowire-based gate-all-around transistors in the next-generation logic and memory devices. During the fabrication process, SiGe can either be used as a sacrificial layer to form suspended horizontal Si nanowires or, because of its higher carrier mobility, SiGe can also be used as a possible channel material that replaces Si in both horizontal and vertical nanowires. In both cases, there is a pressing need to understand and develop nanoscale etching processes that enable controlled and selective removal of SiGe with respect to Si. Here, we developed and tested solution-based selective etching processes for SiGe in composite (SiNx/Si0.75Ge0.25/Si) vertical nanowires. The etching solutions were formed by mixing acetic acid (CH3COOH), hydrogen peroxide (H2O2), and hydrofluoric acid (HF). Here, the two chemicals (H2O2 and CH3COOH) react to form highly oxidizing peracetic acid (PAA or CH_3 CO_3 H). The hydrofluoric acid serves both as a catalyst for PAA formation and as an etchant for oxidized SiGe. Our study shows that an increase in either of the oxidizer concentrations increases the etch rate, and the fastest etch rate of SiGe is associated with the highest PAA concentration. Moreover, using in situ liquid phase TEM imaging, we tested the stability of nanowires during wet etching and identified that SiGe/Si interface to be the weakest plane; we found that once the diameter of the 160-nm-tall Si0.75Ge0.25 nanowire reaches ~15 nm during the etching, the nanowire breaks at or very close to this interface. Our study provides an important insight into the details of the wet etching of SiGe and some of the associated failure modes that are becoming extremely relevant for the fabrication processes as the size of the transistors shrink with every new device-generation.
- 16 September 2019
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 11 (40) , 36839-36846
Selective Wet Etching of Silicon Germanium in Composite Vertical Nanowires
Silicon Germanium (SixGe1-x or SiGe) is an important semiconductor material for the fabrication of nanowire-based gate-all-around transistors in the next-generation logic and memory devices. During the fabrication process, SiGe can either be used as a sacrificial layer to form suspended horizontal Si nanowires or, because of its higher carrier mobility, SiGe can also be used as a possible channel material that replaces Si in both horizontal and vertical nanowires. In both cases, there is a pressing need to understand and develop nanoscale etching processes that enable controlled and selective removal of SiGe with respect to Si. Here, we developed and tested solution-based selective etching processes for SiGe in composite (SiNx/Si0.75Ge0.25/Si) vertical nanowires. The etching solutions were formed by mixing acetic acid (CH3COOH), hydrogen peroxide (H2O2), and hydrofluoric acid (HF). Here, the two chemicals (H2O2 and CH3COOH) react to form highly oxidizing peracetic acid (PAA or CH_3 CO_3 H). The hydrofluoric acid serves both as a catalyst for PAA formation and as an etchant for oxidized SiGe. Our study shows that an increase in either of the oxidizer concentrations increases the etch rate, and the fastest etch rate of SiGe is associated with the highest PAA concentration. Moreover, using in situ liquid phase TEM imaging, we tested the stability of nanowires during wet etching and identified that SiGe/Si interface to be the weakest plane; we found that once the diameter of the 160-nm-tall Si0.75Ge0.25 nanowire reaches ~15 nm during the etching, the nanowire breaks at or very close to this interface. Our study provides an important insight into the details of the wet etching of SiGe and some of the associated failure modes that are becoming extremely relevant for the fabrication processes as the size of the transistors shrink with every new device-generation.
- 12 August 2019
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 10 (17) , 5082-5089
Growth Dynamics of Gallium Nanodroplets Driven by Thermally Activated Surface Diffusion
The growth of catalytic liquid-metal nanodroplets on flat substrates is essential for many technological applications. However, the detailed nucleation and growth dynamics of these nanodroplets remain unclear. Here, using in situ transmission electron microscopy (TEM) imaging, we track in real time the growth of individual Ga nanodroplets from a beam of Ga vapor. We show that the nucleation and growth are driven by thermally activated surface diffusion of Ga adatoms, with the diffusion activation energy of ED = 95 ± 10 meV on a SiNx surface. More importantly, our analysis shows that Ga dimers serve as the critical nucleation clusters and that the nanodroplet growth follows a power-law of the form R(t) ∝ e–ED/kBT(t – t0)1/2. These insights into the growth dynamics of metallic nanodroplets are essential for tailoring their size and density for their application in self-catalyzed growth of nanomaterials.
- 12 August 2019
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 10 (17) , 5082-5089
Growth Dynamics of Gallium Nanodroplets Driven by Thermally Activated Surface Diffusion
The growth of catalytic liquid-metal nanodroplets on flat substrates is essential for many technological applications. However, the detailed nucleation and growth dynamics of these nanodroplets remain unclear. Here, using in situ transmission electron microscopy (TEM) imaging, we track in real time the growth of individual Ga nanodroplets from a beam of Ga vapor. We show that the nucleation and growth are driven by thermally activated surface diffusion of Ga adatoms, with the diffusion activation energy of ED = 95 ± 10 meV on a SiNx surface. More importantly, our analysis shows that Ga dimers serve as the critical nucleation clusters and that the nanodroplet growth follows a power-law of the form R(t) ∝ e–ED/kBT(t – t0)1/2. These insights into the growth dynamics of metallic nanodroplets are essential for tailoring their size and density for their application in self-catalyzed growth of nanomaterials.