Aroonsri Nuchitprasittichai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Aroonsri Nuchitprasittichai has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Prapatsorn Borisut
School of Chemical Engineering, Suranaree University of Technology, Nakhon Ratchasima 30000, Thailand
2 shared publications - Atichat Wongkoblap
School of Chemical Engineering, Institute of Engineering, Suranaree University of Technology, Nakhon Ratchasima, Thailand
1 shared publication P Borisut
1 shared publicationPrapatsorn Borisut
Department of Chemical Engineering, Suranaree University of Technology, Nakhon Ratchasima, Thailand
1 shared publicationS Doungsri
School of Chemical Engineering, Institute of Engineering, Suranaree University of Technology, Nakhon Ratchasima 30000, Thailand
1 shared publicationT Sookkumnerd
School of Chemical Engineering, Institute of Engineering, Suranaree University of Technology, Nakhon Ratchasima 30000, Thailand
1 shared publication
Latest Publications
- Top Cited PapersOpen Access
Adaptive Latin Hypercube Sampling for a Surrogate-Based Optimization with Artificial Neural Network
A significant number of sample points are often required for surrogate-based optimization when utilizing process simulations to cover the entire system space. This necessity is particularly pronounced in complex simulations or high-dimensional physical experiments, where a large number of sample points is essential. In this study, we have developed an adaptive Latin hypercube sampling (LHS) method that generates additional sample points from areas with the highest output deviations to optimize the required number of samples. The surrogate model used for the optimization problem is artificial neural networks (ANNs). The standard for measuring solution accuracy is the percent error of the optimal solution. The outcomes of the proposed algorithm were compared to those of random sampling for validation. As case studies, we chose three different chemical processes to illustrate problems of varying complexity and numbers of variables. The findings indicate that for all case studies, the proposed LHS optimization algorithm required fewer sample points than random sampling to achieve optimal solutions of similar quality. To extend the application of this methodology, we recommend further applying it to fields beyond chemical engineering and higher-dimensional problems.
Top Cited PapersOpen AccessAdaptive Latin Hypercube Sampling for a Surrogate-Based Optimization with Artificial Neural Network
A significant number of sample points are often required for surrogate-based optimization when utilizing process simulations to cover the entire system space. This necessity is particularly pronounced in complex simulations or high-dimensional physical experiments, where a large number of sample points is essential. In this study, we have developed an adaptive Latin hypercube sampling (LHS) method that generates additional sample points from areas with the highest output deviations to optimize the required number of samples. The surrogate model used for the optimization problem is artificial neural networks (ANNs). The standard for measuring solution accuracy is the percent error of the optimal solution. The outcomes of the proposed algorithm were compared to those of random sampling for validation. As case studies, we chose three different chemical processes to illustrate problems of varying complexity and numbers of variables. The findings indicate that for all case studies, the proposed LHS optimization algorithm required fewer sample points than random sampling to achieve optimal solutions of similar quality. To extend the application of this methodology, we recommend further applying it to fields beyond chemical engineering and higher-dimensional problems.
- Open Access
Process Configuration Studies of Methanol Production via Carbon Dioxide Hydrogenation: Process Simulation-Based Optimization Using Artificial Neural Networks
Methanol production via carbon dioxide (CO2) hydrogenation is a green chemical process, which can reduce CO2 emission. The operating conditions for minimum methanol production cost of three configurations were investigated in this work. An artificial neural network with Latin hypercube sampling technique was applied to construct model-represented methanol production. Price sensitivity was performed to study the impacts of the raw materials price on methanol production cost. Price sensitivity results showed that the hydrogen price has a large impact on the methanol production cost. In mathematical modeling using feedforward artificial neural networks, four different numbers of nodes were used to train artificial neural networks. The artificial neural network with eight numbers of nodes showed the most suitable configuration, which yielded the lowest percent error between the actual and predicted methanol production cost. The optimization results showed that the recommended process design among the three studied configurations was the process of methanol production with two reactors in series. The minimum methanol production cost obtained from this configuration was $888.85 per ton produced methanol, which was the lowest methanol production cost among all configurations.
Open AccessProcess Configuration Studies of Methanol Production via Carbon Dioxide Hydrogenation: Process Simulation-Based Optimization Using Artificial Neural Networks
Methanol production via carbon dioxide (CO2) hydrogenation is a green chemical process, which can reduce CO2 emission. The operating conditions for minimum methanol production cost of three configurations were investigated in this work. An artificial neural network with Latin hypercube sampling technique was applied to construct model-represented methanol production. Price sensitivity was performed to study the impacts of the raw materials price on methanol production cost. Price sensitivity results showed that the hydrogen price has a large impact on the methanol production cost. In mathematical modeling using feedforward artificial neural networks, four different numbers of nodes were used to train artificial neural networks. The artificial neural network with eight numbers of nodes showed the most suitable configuration, which yielded the lowest percent error between the actual and predicted methanol production cost. The optimization results showed that the recommended process design among the three studied configurations was the process of methanol production with two reactors in series. The minimum methanol production cost obtained from this configuration was $888.85 per ton produced methanol, which was the lowest methanol production cost among all configurations.
- Open Access
- 1 April 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 778 (1)
Optimization of methanol production via CO2 hydrogenation: comparison of sampling techniques for process modeling
This paper compares performances of three different sampling techniques in representing nonlinear response surface for optimization problem, with five decision variables. Three studied sampling techniques are Central Composite Design (CCD), Box – Behnken Design (BBD) and Latin Hypercube Sampling ( LHS). Simulation – based optimization of methanol production via CO2 hydrogenation process was used as a case study. The objective of this optimization problem is to minimize the methanol production cost. The nonlinear model ( the objective function) represents the relationship between operating conditions and methanol production cost. The results show that the response surface of this case study is trend to be the third order model ( with R – squared value greater than 0.97) for all sampling techniques. BBD is the most suitable sampling technique in this study, resulting in the percent error less than 1.2. The LHS shows comparable performance with BBD if it has suitable number of sample points.
- 1 April 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 778 (1)
Open AccessOptimization of methanol production via CO2 hydrogenation: comparison of sampling techniques for process modeling
This paper compares performances of three different sampling techniques in representing nonlinear response surface for optimization problem, with five decision variables. Three studied sampling techniques are Central Composite Design (CCD), Box – Behnken Design (BBD) and Latin Hypercube Sampling ( LHS). Simulation – based optimization of methanol production via CO2 hydrogenation process was used as a case study. The objective of this optimization problem is to minimize the methanol production cost. The nonlinear model ( the objective function) represents the relationship between operating conditions and methanol production cost. The results show that the response surface of this case study is trend to be the third order model ( with R – squared value greater than 0.97) for all sampling techniques. BBD is the most suitable sampling technique in this study, resulting in the percent error less than 1.2. The LHS shows comparable performance with BBD if it has suitable number of sample points.
- Open Access
- 6 September 2019
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 7
Methanol Production via CO2 Hydrogenation: Sensitivity Analysis and Simulation—Based Optimization
Carbon dioxide (CO2) is one of greenhouse gases, which can cause global warming. One of studies to mitigate CO2 emissions to the atmosphere is to convert CO2 to valuable products (i.e., methanol). To make methanol production via CO2 hydrogenation a competitive process, the optimal operating conditions with minimum production cost need to be considered. This paper studied an application of response surface methodology (RSM) in optimization of methanol production via CO2 hydrogenation. The objective of this optimization was to minimize the methanol production cost per tons produced methanol. The sensitivity analysis was performed to determine the parameters that show significant impacts on the methanol production cost. Response surface methodology coupled with non-linear programming solver were used as the optimization tool. The results showed RSM was successfully applied to the methanol production via CO2 hydrogenation process. The obtained minimum methanol production cost was $565.54 per ton produced methanol with the optimal operating conditions as follows. Inlet pressure to the first reactor: 57.8 bar, Inlet temperature to the first reactor: 183.6°C, Inlet pressure to the second reactor: 102.6 bar, Outlet temperature of the liquid stream cooler after the second reactor: 63.5°C, Inlet temperature to the first distillation column: 51.8°C.
- 6 September 2019
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 7
Open AccessMethanol Production via CO2 Hydrogenation: Sensitivity Analysis and Simulation—Based Optimization
Carbon dioxide (CO2) is one of greenhouse gases, which can cause global warming. One of studies to mitigate CO2 emissions to the atmosphere is to convert CO2 to valuable products (i.e., methanol). To make methanol production via CO2 hydrogenation a competitive process, the optimal operating conditions with minimum production cost need to be considered. This paper studied an application of response surface methodology (RSM) in optimization of methanol production via CO2 hydrogenation. The objective of this optimization was to minimize the methanol production cost per tons produced methanol. The sensitivity analysis was performed to determine the parameters that show significant impacts on the methanol production cost. Response surface methodology coupled with non-linear programming solver were used as the optimization tool. The results showed RSM was successfully applied to the methanol production via CO2 hydrogenation process. The obtained minimum methanol production cost was $565.54 per ton produced methanol with the optimal operating conditions as follows. Inlet pressure to the first reactor: 57.8 bar, Inlet temperature to the first reactor: 183.6°C, Inlet pressure to the second reactor: 102.6 bar, Outlet temperature of the liquid stream cooler after the second reactor: 63.5°C, Inlet temperature to the first distillation column: 51.8°C.
- Open Access
- 28 November 2017
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 273 (1) , 012008
Equilibrium study for ternary mixtures of biodiesel
The liquid-liquid equilibrium (LLE) data for the ternary mixtures of methanol + fatty acid methyl ester (FAME) + palm oil and FAME + palm oil + glycerol at various temperatures from 35 to 55°C, the tie lines and binodial curves were also investigated and plotted in the equilibrium curve. The experimental results showed that the binodial curves of methanol + FAME + palm oil depended significantly with temperature while the binodial curves of FAME + palm oil + glycerol illustrated insignificant change with temperatures. The interaction parameters between liquid pair obtained for NRTL (Nonrandom Two-Liquid) and UNIQUAC (Universal Quasi-Chemical Theory) models from the experimental data were also investigated. It was found that the correlated parameters of UNIQUAC model for system of FAME + palm oil + glycerol, denoted as a13 and a31, were 580.42K and -123.69K, respectively, while those for system of methanol + FAME + palm oil, denoted as a42 and a24, were 71.48 K and 965.57K, respectively. The ternary LLE data reported here would be beneficial for engineers and scientists to use for prediction of yield and purity of biodiesel for the production. The UNIQUAC model agreed well with the experimental data of ternary mixtures of biodiesel.
- 28 November 2017
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 273 (1) , 012008
Open AccessEquilibrium study for ternary mixtures of biodiesel
The liquid-liquid equilibrium (LLE) data for the ternary mixtures of methanol + fatty acid methyl ester (FAME) + palm oil and FAME + palm oil + glycerol at various temperatures from 35 to 55°C, the tie lines and binodial curves were also investigated and plotted in the equilibrium curve. The experimental results showed that the binodial curves of methanol + FAME + palm oil depended significantly with temperature while the binodial curves of FAME + palm oil + glycerol illustrated insignificant change with temperatures. The interaction parameters between liquid pair obtained for NRTL (Nonrandom Two-Liquid) and UNIQUAC (Universal Quasi-Chemical Theory) models from the experimental data were also investigated. It was found that the correlated parameters of UNIQUAC model for system of FAME + palm oil + glycerol, denoted as a13 and a31, were 580.42K and -123.69K, respectively, while those for system of methanol + FAME + palm oil, denoted as a42 and a24, were 71.48 K and 965.57K, respectively. The ternary LLE data reported here would be beneficial for engineers and scientists to use for prediction of yield and purity of biodiesel for the production. The UNIQUAC model agreed well with the experimental data of ternary mixtures of biodiesel.