Rasmus Thomas Jones
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Rasmus Thomas Jones has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Darko Zibar
DTU Electro, Technical University of Denmark, Kgs. Lyngby, Denmark
5 shared publications - Francesco Da Ros
Department of Electrical and Photonics Engineering, Technical University of Denmark, Kgs. Lyngby, Denmark
3 shared publications - Simone Gaiarin
DTU Fotonik Technical University of Denmark 2800 Lyngby Denmark
3 shared publications Darko Zibar
2 shared publications- Metodi Plamenov Yankov
Department of Electrical and Photonics Engineering, Technical University of Denmark, Lyngby, Denmark
2 shared publications - Benjamin J. Puttnam
National Institute of Information and Communications Technology
1 shared publication
Latest Publications
- 26 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 39 (2) , 418-428
End-to-End Optimization of Coherent Optical Communications Over the Split-Step Fourier Method Guided by the Nonlinear Fourier Transform Theory
Optimizing modulation and detection strategies for a given channel is critical to maximize the throughput of a communication system. Such an optimization can be easily carried out analytically for channels that admit closed-form analytical models. However, this task becomes extremely challenging for nonlinear dispersive channels such as the optical fiber. End-to-end optimization through autoencoders (AEs) can be applied to define symbol-to-waveform (modulation) and waveform-tosymbol (detection) mappings, but so far it has been mainly shown for systems relying on approximate channel models. Here, for the first time, we propose an AE scheme applied to the full optical channel described by the nonlinear Schrodinger equation (NLSE). Transmitter and receiver are jointly optimized through the split-step Fourier method (SSFM) which accurately models an optical fiber. In this first numerical analysis, the detection is performed by a neural network (NN), whereas the symbol-towaveform mapping is aided by the nonlinear Fourier transform (NFT) theory in order to simplify and guide the optimization on the modulation side. This proof-of-concept AE scheme is thus benchmarked against a standard NFT-based system and a threefold increase in achievable distance (from 2000 to 6640 km) is demonstrated.
- 26 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 39 (2) , 418-428
End-to-End Optimization of Coherent Optical Communications Over the Split-Step Fourier Method Guided by the Nonlinear Fourier Transform Theory
Optimizing modulation and detection strategies for a given channel is critical to maximize the throughput of a communication system. Such an optimization can be easily carried out analytically for channels that admit closed-form analytical models. However, this task becomes extremely challenging for nonlinear dispersive channels such as the optical fiber. End-to-end optimization through autoencoders (AEs) can be applied to define symbol-to-waveform (modulation) and waveform-tosymbol (detection) mappings, but so far it has been mainly shown for systems relying on approximate channel models. Here, for the first time, we propose an AE scheme applied to the full optical channel described by the nonlinear Schrodinger equation (NLSE). Transmitter and receiver are jointly optimized through the split-step Fourier method (SSFM) which accurately models an optical fiber. In this first numerical analysis, the detection is performed by a neural network (NN), whereas the symbol-towaveform mapping is aided by the nonlinear Fourier transform (NFT) theory in order to simplify and guide the optimization on the modulation side. This proof-of-concept AE scheme is thus benchmarked against a standard NFT-based system and a threefold increase in achievable distance (from 2000 to 6640 km) is demonstrated.
- Open Access
End-to-end optimization of coherent optical communications over the split-step Fourier method guided by the nonlinear Fourier transform theory
Optimizing modulation and detection strategies for a given channel is critical to maximize the throughput of a communication system. Such an optimization can be easily carried out analytically for channels that admit closed-form analytical models. However, this task becomes extremely challenging for nonlinear dispersive channels such as the optical fiber. End-to-end optimization through autoencoders (AEs) can be applied to define symbol-to-waveform (modulation) and waveform-to-symbol (detection) mappings, but so far it has been mainly shown for systems relying on approximate channel models. Here, for the first time, we propose an AE scheme applied to the full optical channel described by the nonlinear Schr\{"o}dinger equation (NLSE). Transmitter and receiver are jointly optimized through the split-step Fourier method (SSFM) which accurately models an optical fiber. In this first numerical analysis, the detection is performed by a neural network (NN), whereas the symbol-to-waveform mapping is aided by the nonlinear Fourier transform (NFT) theory in order to simplify and guide the optimization on the modulation side. This proof-of-concept AE scheme is thus benchmarked against a standard NFT-based system and a threefold increase in achievable distance (from 2000 to 6640 km) is demonstrated.
Open AccessEnd-to-end optimization of coherent optical communications over the split-step Fourier method guided by the nonlinear Fourier transform theory
Optimizing modulation and detection strategies for a given channel is critical to maximize the throughput of a communication system. Such an optimization can be easily carried out analytically for channels that admit closed-form analytical models. However, this task becomes extremely challenging for nonlinear dispersive channels such as the optical fiber. End-to-end optimization through autoencoders (AEs) can be applied to define symbol-to-waveform (modulation) and waveform-to-symbol (detection) mappings, but so far it has been mainly shown for systems relying on approximate channel models. Here, for the first time, we propose an AE scheme applied to the full optical channel described by the nonlinear Schr\{"o}dinger equation (NLSE). Transmitter and receiver are jointly optimized through the split-step Fourier method (SSFM) which accurately models an optical fiber. In this first numerical analysis, the detection is performed by a neural network (NN), whereas the symbol-to-waveform mapping is aided by the nonlinear Fourier transform (NFT) theory in order to simplify and guide the optimization on the modulation side. This proof-of-concept AE scheme is thus benchmarked against a standard NFT-based system and a threefold increase in achievable distance (from 2000 to 6640 km) is demonstrated.
- 14 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 38 (23) , 6465-6473
Experimental Demonstration of Nonlinear Frequency Division Multiplexing Transmission With Neural Network Receiver
Nonlinear frequency division multiplexing (NFDM) communication systems that are based on the nonlinear Fourier transform (NFT), have seen a rapid improvement in performance and transmission reach over just a few years. However, such an improvement is now being slowed down by fundamental challenges such as fiber loss and noise. As the NFT theory is defined over a lossless transmission fiber, a strong research focus has been dedicated to either improve the lossless assumption for practical fibers, by adapting the theory to approximately account for the fiber loss, or by devising encoding schemes that increase the robustness of the NFT to the fiber attenuation. However, the proposed solutions provide only minimal benefits to the system performance, especially for long fiber spans as in deployed links. Alternatively, a detection strategy based on replacing a conventional NFT receiver with a time-domain Neural network (NN)-based symbol decisor has been numerically proposed. Here, we extend such an idea by validating it experimentally. In order to apply the method in an experimental environment, the impact of phase noise, and receiver frequency offset needs to be addressed. We, therefore, propose a novel time-domain receiver architecture that combines a two-stage iterative carrier recovery with a NN-based symbol decisor. The carrier recovery, itself based on aNN for phase estimation, is numerically, and experimentally characterized. The proposed receiver has been evaluated for single-polarization two-eigenvalue transmission at 1 GBd. A two-fold increase in the transmission reach is enabled by the NN receiver (≈1600 km) compared to a conventional NFT receiver (≈560 km) for a practical link using 80-km spaced erbium-doped fiber amplifier (EDFAs).
- 14 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 38 (23) , 6465-6473
Experimental Demonstration of Nonlinear Frequency Division Multiplexing Transmission With Neural Network Receiver
Nonlinear frequency division multiplexing (NFDM) communication systems that are based on the nonlinear Fourier transform (NFT), have seen a rapid improvement in performance and transmission reach over just a few years. However, such an improvement is now being slowed down by fundamental challenges such as fiber loss and noise. As the NFT theory is defined over a lossless transmission fiber, a strong research focus has been dedicated to either improve the lossless assumption for practical fibers, by adapting the theory to approximately account for the fiber loss, or by devising encoding schemes that increase the robustness of the NFT to the fiber attenuation. However, the proposed solutions provide only minimal benefits to the system performance, especially for long fiber spans as in deployed links. Alternatively, a detection strategy based on replacing a conventional NFT receiver with a time-domain Neural network (NN)-based symbol decisor has been numerically proposed. Here, we extend such an idea by validating it experimentally. In order to apply the method in an experimental environment, the impact of phase noise, and receiver frequency offset needs to be addressed. We, therefore, propose a novel time-domain receiver architecture that combines a two-stage iterative carrier recovery with a NN-based symbol decisor. The carrier recovery, itself based on aNN for phase estimation, is numerically, and experimentally characterized. The proposed receiver has been evaluated for single-polarization two-eigenvalue transmission at 1 GBd. A two-fold increase in the transmission reach is enabled by the NN receiver (≈1600 km) compared to a conventional NFT receiver (≈560 km) for a practical link using 80-km spaced erbium-doped fiber amplifier (EDFAs).
- Open Access
Geometric Constellation Shaping for Fiber Optic Communication Systems via End-to-end Learning
In this paper, an unsupervised machine learning method for geometric constellation shaping is investigated. By embedding a differentiable fiber channel model within two neural networks, the learning algorithm is optimizing for a geometric constellation shape. The learned constellations yield improved performance to state-of-the-art geometrically shaped constellations, and include an implicit trade-off between amplification noise and nonlinear effects. Further, the method allows joint optimization of system parameters, such as the optimal launch power, simultaneously with the constellation shape. An experimental demonstration validates the findings. Improved performances are reported, up to 0.13 bit/4D in simulation and experimentally up to 0.12 bit/4D.
Open AccessGeometric Constellation Shaping for Fiber Optic Communication Systems via End-to-end Learning
In this paper, an unsupervised machine learning method for geometric constellation shaping is investigated. By embedding a differentiable fiber channel model within two neural networks, the learning algorithm is optimizing for a geometric constellation shape. The learned constellations yield improved performance to state-of-the-art geometrically shaped constellations, and include an implicit trade-off between amplification noise and nonlinear effects. Further, the method allows joint optimization of system parameters, such as the optimal launch power, simultaneously with the constellation shape. An experimental demonstration validates the findings. Improved performances are reported, up to 0.13 bit/4D in simulation and experimentally up to 0.12 bit/4D.
- Open Access
Deep Learning of Geometric Constellation Shaping including Fiber Nonlinearities
A new geometric shaping method is proposed, leveraging unsupervised machine learning to optimize the constellation design. The learned constellation mitigates nonlinear effects with gains up to 0.13 bit/4D when trained with a simplified fiber channel model.
Open AccessDeep Learning of Geometric Constellation Shaping including Fiber Nonlinearities
A new geometric shaping method is proposed, leveraging unsupervised machine learning to optimize the constellation design. The learned constellation mitigates nonlinear effects with gains up to 0.13 bit/4D when trained with a simplified fiber channel model.
- 30 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 30 (12) , 1079-1082
Time-Domain Neural Network Receiver for Nonlinear Frequency Division Multiplexed Systems
The nonlinear Fourier transform is a new approach of addressing the capacity limiting Kerr nonlinearities in optical communication systems. It exploits the property of integrability of the lossless nonlinear Schrödinger equation and thus incorporates nonlinearities as an element of the transmission. However, practical links employing erbium-doped fiber amplifiers include losses/gains and introduce noise which breaks the integrability of the nonlinear Schrödinger equation. Although the lossless path average approximation proposes an integrable model, its imprecision still leads to unintended distortions and thus performance degradation. We propose an alternative receiver for nonlinear frequency division multiplexing optical communication systems using techniques from machine learning. It is highly adaptive as it learns from previously transmitted pulses and thus holds no assumptions on the system and noise distribution. The detection method presented is fully applied in time-domain and omits the nonlinear Fourier transform. The numerical results provide a benchmark for nonlinear Fourier transform based detection of high order solitons for fiber links with losses and noise present.
- 30 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 30 (12) , 1079-1082
Time-Domain Neural Network Receiver for Nonlinear Frequency Division Multiplexed Systems
The nonlinear Fourier transform is a new approach of addressing the capacity limiting Kerr nonlinearities in optical communication systems. It exploits the property of integrability of the lossless nonlinear Schrödinger equation and thus incorporates nonlinearities as an element of the transmission. However, practical links employing erbium-doped fiber amplifiers include losses/gains and introduce noise which breaks the integrability of the nonlinear Schrödinger equation. Although the lossless path average approximation proposes an integrable model, its imprecision still leads to unintended distortions and thus performance degradation. We propose an alternative receiver for nonlinear frequency division multiplexing optical communication systems using techniques from machine learning. It is highly adaptive as it learns from previously transmitted pulses and thus holds no assumptions on the system and noise distribution. The detection method presented is fully applied in time-domain and omits the nonlinear Fourier transform. The numerical results provide a benchmark for nonlinear Fourier transform based detection of high order solitons for fiber links with losses and noise present.
- 12 March 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 36 (12) , 2450-2462
Optimization of DP-M-QAM Transmitter Using Cooperative Coevolutionary Genetic Algorithm
We present a method for joint optimization of transmitter in-phase, quadrature and interpolarization time skew, amplitude mismatch, and bias voltages. The method is based on a cooperative coevolutionary genetic algorithm with fitness functions extracted from a directly detected reference quadrature amplitude modulation (QAM) signal generated at the transmitter. As a calibration method, it is able to find the values that will statically generate the best possible constellation. To the extent of the simulation investigations conducted, the algorithm is capable to calibrate time skews, bias voltages, IQ phase imbalances, and relative amplitude imbalances with standard deviation of residual error as low as 0.24 ps, 0.019 V, 0.56°, and 0.003, respectively, for a dual-polarization IQ modulator with V π = 4 V and a 16-QAM reference signal operating at 16 GBd. An experimental demonstration is also reported.
- 12 March 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 36 (12) , 2450-2462
Optimization of DP-M-QAM Transmitter Using Cooperative Coevolutionary Genetic Algorithm
We present a method for joint optimization of transmitter in-phase, quadrature and interpolarization time skew, amplitude mismatch, and bias voltages. The method is based on a cooperative coevolutionary genetic algorithm with fitness functions extracted from a directly detected reference quadrature amplitude modulation (QAM) signal generated at the transmitter. As a calibration method, it is able to find the values that will statically generate the best possible constellation. To the extent of the simulation investigations conducted, the algorithm is capable to calibrate time skews, bias voltages, IQ phase imbalances, and relative amplitude imbalances with standard deviation of residual error as low as 0.24 ps, 0.019 V, 0.56°, and 0.003, respectively, for a dual-polarization IQ modulator with V π = 4 V and a 16-QAM reference signal operating at 16 GBd. An experimental demonstration is also reported.